Lost HP assistant when installing psc 70 on mac pro
When I installed my PSC 750 xi on my new Mac Pro (Intel), the HP assistant never showed up. I downloaded the latest software from HP, uninstalled the old software and installed the new. Still no assistant. I really miss the HP assistant. I made scanning so much more efficient. Can anyone help? Thanks
vkindred,
I don't know what version of Apple OS software your using but take a look at the following link to see how the connecting and managing your printer and scanners works:
Printers & Scanners
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
Working for HP and here to help!
Similar Messages
-
" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]Someone in another section answered this. Thanks.
-
How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?
How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
ThanksWhy? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com -
I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.
ErnestNot sure if I'm following you. I have 4 hard drives installed on my Mac Pro. I had a RAID 5 configured and functional for about 5 months. My battery died on the RAID card. I replaced the battery, seated the RAID card back in the slot I removed it from. When I booted to the USB drive to look in the RAID utility, I could see the battery is charged but my volumes are not showing.
The drives don't show in disk Utility. I built the RAID with the RAID Utility and they did show there. I have a early 2008 Mac Pro, Mavricks OS running Mac Server -
when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours
Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you! -
Trying to install Mavericks on Mac Pro series 4,1
Hi all,
I'm trying to install Mavericks on Mac Pro series 4,1 After downloading from App Store, when computer restarts I get grey screen with the "no entry" sign. I have checked compatibility and this model qualifies for Mavericks. Tried a clean install of 10.6.8 first, but no luck. Any ideas?
The Mac has single quad core 2.66, 6 Gb RAM, NVIDIA GeForce GT120 graphics. Four hard drives. Three Pro Tools HD cards in PCIe slots.
I also tried this with Mountain Lion, with the same results.Didn't have any luck with removing PCI cards, BUT................ here's how I resolved the issue:
I tried making a USB stick installer. That also failed, but I noticed it couldn't find any hard drives.
I did a search about OSX installer not finding drives and found someone who had that issue and it turned out to be a conflict with the WIFI card (Atheros, not the more common Broadcom)
I checked my System Profiler and sure enough, I have the Atheros.
I just removed the WIFI card and booted into OSX Installer (it was still there after the failed install) and successfully installed Mavericks. -
hello ....
my connection problem on my mac pro is :
that when i try to open a website on safari .... it delays ... and takes more than 30 seconds to open completely ...
but when i move the mac pro to another location ... its internet opening speeds up ....
also in one room ... web opening delays .... but on other rooms it is normal
so what can i do to solve this problem ....
Note : also when i hold it up and move in the same room ... the speed changes and somewhere speed up ... and in another location speed down ..
thanks for you all ...
Waiting for your support ... as quick as possible ...WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
https://www.open-mesh.com/ -
when i upgrade my Mac Pro to yosemite safari doesn't good work and doesn't save bookmark plz help me to fix it
hi
when i save a page as boomark shown at the bookmark list when i close safari and restart safari evry bookmark that i saved dosn't show at the bookmark list
excuse me for whriting i speak a little english
1 save bookmark and show at the bookmarklist
2 i close safari
3 and reopen it
4any bookmark ,i saved them dosn't show at the bookmark list -
Why when installing Adobe Acrobat XI Pro do I recieve install error 1328 ? Does same when trying to update as well. How can I fix this?
Moving this discussion to the Acrobat Installation & Update Issues forum.
-
Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please
Assuming you are disconnecting from line power, when you say switched on, do you mean it was shutdown or in sleep mode? If sleep mode the battery will still drain because sleep still keeps some things active and the battery does drain a little. However, to go from 100% to 79% charge overnight is a bit excessive in sleep mode. Unless you have some processes set to activate over night by the cron file and do things like backup the system.
What are the statistics on the battery, the apple in the upper left corner, About This Mac, More Info, System Report, Hardware, Power...things like battery Condition, Capacity, remaining charge, voltage, current. -
Acrobat Pro XI when installed over Acrobat 9 Pro removes LiveCycle Designer.
Acrobat Pro XI when installed over Acrobat 9 Pro removes LiveCycle Designer. Forms Central can't open LiveCycle Designer Forms so what do you do?
I have uninstalled XI and re-installed LiveCycle Designer only. On re-installation, I chose not to uninstall version 9 and to do a customer set up (not installing forms central).
LiveCycle is now working along with Acrobat ProXILiveCycle Designer is no longer distributed as part of the Acrobat release. I think it is available as a separate product. At this point, Acrobat provides the AcroForm type tools (kind of hard to get to, just as in some previous versions) and the option for Forms Central. The whole focus has changed. I suspect that others may be in the same situation of trying to get their forms to interact in Acrobat or Forms Central, but at this point I do not think there is any way to back Designer forms into either of the two current formats. Not much help, but a comment in any case.
-
WinXP Home install problems on Mac Pro
Hi,
I have a brand new Mac Pro Dual 2.66GHz. It came with a second GeForce 7300GT installed. I installed additional 2x 1GB FB DIMMs. Everything worked fine, and I installed all new updates, including the new EFI Firmware update Apple introduced yesterday. After the OS X setup was complete, I downloaded BootCamp 1.1.2 and followed the instructions to create a 30GB partition for Windows XP Home. I insert the WinXP CD and let BootCamp restart the computer. WinXP boots and the blue screen appears and a bunch of drivers get loaded. After that I get the first install screen, and on that point the keyboard is not responding anymore. I can press "return" as often as I want, the install does not start. It also not responds to F3 or R as written on the screen. Its the first time Windows gets installed on this Mac Pro. I also tried to connect the keyboard directly to the computer (before it was on the cinema display hub). I tried to remove the RAM to have only the standard 1GB RAM installed. Nothing worked.
Anyone have a hint to get this done? Thanka a lot on advance!
MartyI already thougt about that, but Apple put a note on the page:
http://www.apple.com/support/downloads/firmwarerestorationcd12.html
"Note: This CD cannot be used to return an Intel-based Macintosh computer’s firmware to a previous version if a successful update has already been performed."
So because I did a successful fimware update, I can not go back to the old firmware! There is no way back! -
I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.
It was the PRAM.
-
ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?
ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?
I hv tried installed FirePRO V5800 on 2012 MAC PRO ,no luck
* hear boot chime but no display output -
I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you
"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/
Maybe you are looking for
-
Every time a message pops up - "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot?" I have rebooted my computer atleast 20 times but still the problem exists. I tried to uninstall firefox but the same me
-
Two Buttons on my iPhone 4 & Its Accessory Keyboard Have All Stopped Responding. What to do?
The "Calendar" and the "Reminder" buttons on my iPhone 4 purchased in 9/2012 have stopped responding. The phone has worked well to date. What to do? I also use an accessory keyboard, which is made by Apple but is not listed online in the product op
-
Wireless portable speakers - airplay or bluetooth?
Hello everybody Could you recommend based on your practical experience portable stereo speakers to stream audio from iphone or ipad? These speakers would be used around home 99% of the case and while they can be plugged to a power plug I'd rather hav
-
Validation of attribute in Entity Object with List Rule Type
hi all I have an entity "currncy" and I want to make a validation in entity level on its attribute "Isdefaultcurrency" which is boolean. Entity Object : Currency attributes : 1. Currencyid DBsequence 2. Currencyname String 3. Isdefaultcurrency, Boole
-
Does anyone have a list of file types that can be copied by DBMS_FILE_TRANSFER? I know the database files such as datafile, control file, tempfile and also dum file can be moved using this package.