Lost option to upload related files when using testing server.

I used to get a dialogue box when I was previewing files on my local machine using my localhost testing server setup. It was kind of annoying having to click yes every time. Last week I accidentally clicked the don't show this anymore box and now when I preview a site on my localhost related files and updated files are not uploaded. I have to manually upload the css, php, and any other related files to the testing server's folder.
I tried deleting preferences, re-installing Dreamweaver CS4, and everything else I can think of but I can't get this option back. Is there some way, other than using the same folder for the testing server and the site to avoid this problem?
Thanks.

Edit > Preferences > Site > Dependant Files > Check the box for "Prompt on Put or Check-in"
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Similar Messages

Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

Adobe Premiere CC 2014.2: losing rendered files when using warp stabilizer

Hi,
I am constantly losing rendered files when using the warp stabilizer. So far I have tried about every hint I could find on the web such as cleaning the cache, rebuilding the rendered files, creating additional sequences etc etc.
Honestly I am getting tired of using a product that isnt cheap in the first place to rent and where a bug like this apparently persists over several product versions without being fully fixed (I have had this problem throughout 2014 but according to forum postings others seem to have problems with much earlier versions as well).
I would be really grateful if somebofy has any suggestion how this can be addressed.
I am also happy to help testing fixes - if there are any fixes available.
Thanks a lot and Happy New Year!
Martin

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

How to upload (.txt) file by using GUI Upload?

I tried to upload .csv file in using GUI upload and it works.
THIS IS MY SAMPLE CODE.
CLEAR w_rawfile.
DESCRIBE TABLE i_rawfile LINES v_read.     "Counter for records read
Condense w_rawfile-field.
Separate header record from detail records
LOOP AT i_rawfile INTO w_rawfile.
    IF sy-tabix = 1.           "header is always the first record
      SPLIT w_rawfile-field AT ' ' INTO
        w_header_file-name1
        w_header_file-name2
        w_header_file-name3
        w_header_file-cntry
        w_header_file-address1
        w_header_file-address2.
APPEND w_header_file TO i_header_file.
      CLEAR: w_header_file.
    ELSE.            "succeeding records are detail records
      SPLIT w_rawfile-field AT ',' INTO
             w_inputfile-nachn
             w_inputfile-vorna
             w_inputfile-nach2
             w_inputfile-land1
             w_inputfile-stras
APPEND w_inputfile TO i_inputfile.
ENDIF.
IF i try to replace my file into a .txt format. An error occurs. Please kindly give me the code to do this correctlt. ThanX!

Reading Data from Presentation Server (Dialog)
To read data from the presentation server into an internal table with a user dialog, use the function module UPLOAD. The most important parameters are listed below. For more information, refer to the function module documentation in the Function Builder (Transaction SE37).
Important Import Parameters
Parameters
Function
CODEPAGE
Only for upload under DOS: Value IBM
FILENAME
Filename (default value for user dialog)
FILETYPE
File type (default value for user dialog)
ITEM
Title for dialog box
Use the FILETYPE parameter to specify the transfer mode. Possible values:
BIN
Binary files
ASC
ASCII files: Text files with end of line markers.
DAT
Excel files, saved as text files with columns separated by tabs and lines separated by line breaks.
WK1
Excel and Lotus files saved as WK1 spreadsheets.
Important Export Parameters
Parameters
Function
FILESIZE
Number of bytes transferred
ACT_FILENAME
Filename (as entered in the user dialog)
ACT_FILETYPE
File type (as entered in the user dialog)
Tables Parameters
Parameters
Function
DATA_TAB
Internal table (target for the import)
Exceptions Parameters
Parameters
Function
CONVERSION_ERROR
Error converting data
INVALID_TABLE_WIDTH
Invalid table structure
INVALID_TYPE
Incorrect FILETYPE parameter
Suppose the presentation server is running under Windows NT, and contains the following Excel file:
If this table is saved as a text file "D:\temp\mytable.txt" with tabs between the columns, the following program can read the table:
PROGRAM SAPMZTST.
DATA: FNAME(128), FTYPE(3), FSIZE TYPE I.
TYPES: BEGIN OF LINE,
         COL1(10) TYPE C,
         COL2(10) TYPE C,
         COL3(10) TYPE C,
       END OF LINE.
TYPES ITAB TYPE LINE OCCURS 10.
DATA: LIN TYPE LINE,
      TAB TYPE ITAB.
CALL FUNCTION 'UPLOAD'
     EXPORTING
          CODEPAGE            = 'IBM'
          FILENAME            = 'd:\temp\mytable.txt'
          FILETYPE            = 'DAT'
          ITEM                = 'Read Test for Excel File'
     IMPORTING
          FILESIZE            = FSIZE
          ACT_FILENAME        = FNAME
          ACT_FILETYPE        = FTYPE
     TABLES
          DATA_TAB            = TAB
     EXCEPTIONS
          CONVERSION_ERROR    = 1
          INVALID_TABLE_WIDTH = 2
          INVALID_TYPE        = 3.
WRITE: 'SY-SUBRC:', SY-SUBRC,
     / 'Name    :', (60) FNAME,
     / 'Type    :', FTYPE,
     / 'Size    :', FSIZE.
SKIP.
LOOP AT TAB INTO LIN.
   WRITE: / LIN-COL1, LIN-COL2, LIN-COL3.
ENDLOOP.
The program displays the following dialog box:
Here, the user can change the default values. When the user chooses Transfer, the system imports the data from the file D:\temp\mytable.txt into the internal table TAB.
The output appears as follows:
SY-SUBRC: 0
Name : d:\temp\mytable.txt
Type : DAT
Size : 69
Billy the Kid
My Fair Lady
Herman the German
Conan the Barbarian
The contents of the internal table TAB are exactly the same as the contents of the original Excel table.

Firefox 33 doesn't display a pdf file when using the response object

Firefox 33.0.2 does not display pdf files when using the code below from an asp.net program, which works for previous versions of Firefox, and also works with IE. I'm using the built-in pdf viewer. All of my plugins are disabled.
Dim strPDF As String
strPDF = Session("filname") 'pdf filename
Response.Clear()
Response.ClearHeaders()
Response.Buffer = True
Response.ContentType = "application/pdf"
Response.CacheControl = "Private"
Response.AddHeader("Pragma", "no-cache")
Response.AddHeader("Expires", "0")
Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
Response.AddHeader("Content-Disposition", "inline; filename=" + strPDF)
Response.WriteFile(strPDF)
Response.Flush()
Response.Close()
Response.Clear()
Response.End()
Session("filname") = ""

Thanks cor-el. You pointed me in the right direction. It appears to me that a reported Firefox 33 bug with the handling of compression (Transfer-Encoding: chunked) is the culprit (https://support.mozilla.org/en-US/questions/1026743). I was able to find a work-around by specifying the file size and buffering. Below is my code, with some code from http://www.codeproject.com/Questions/440054/How-to-Open-any-file-in-new-browser-tab-using-ASP.
Dim strPDF As String
strPDF = Session("filname") 'pdf filename
Dim User As New WebClient()
Dim FileBuffer As [Byte]() = User.DownloadData(strPDF)
If Not (FileBuffer Is Nothing) Then
Response.Clear()
Response.ClearHeaders()
Response.CacheControl = "Private"
Response.AddHeader("Pragma", "no-cache")
Response.AddHeader("Expires", "0")
Response.AddHeader("Cache-Control", "no-store, no-cache, must-revalidate")
Response.ContentType = "application/pdf"
Response.AddHeader("content-length", FileBuffer.Length.ToString())
Response.BinaryWrite(FileBuffer)
Response.Flush()
Response.Close()
Response.Clear()
Response.End()
End If
Session("filname") = ""

How do I compress a file on a Mac. I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

How do I compress a file on a Mac. I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

Select the file with one click, then go to File in the menu bar and select Compress...
By the way Niel's post says control - click. This means click with the control key held down. It produces the same result as going to File in the menu bar and selecting Compress...

Unable to upload txt file when creating new message

Hi Expert,
We installed SolMan 7.1, but we are not able to upload txt file when
create a new message, detailed steps as below:
1. Click on “New
Message” under “Common Tasks” in the left side
2. Click on
“Attachment” under “Create Message”
3. Click on “Add”
under “Attachment”
4. Select file and
click on “OK”
5. But as the result, it says “No attachments. Select Add to
upload a new attachment.”
Could you please help advise the reason and solution?
BR
Takashi

Hi Vikram,
Thanks for your reply.
I have tried again and found that, it seems if the file size is 0, it can't be uploaed; if the size if bigger than 0, then it can be uploaded.
So I close this discussion now. Thank you!
BR
Takashi

What is a valid location for autorecovery files when using Word for MAC?

What is a valid location for autorecovery files when using Word for MAC?

Microsoft Word for Mac support forums is probably a better place to ask.

How do upload a file to the application server into a directory?

hi to all,
i want to upload file into the database..i need upload the file into the application server and save it to a directory..is there any way?where i can read about this?any information?
ashwiny

Hello,
First, we need to determine the terms we are using, in order to avoid confusion. We (including the documentation) are using "upload" to describe storing the file on the server, and "download" to pull it from the server into local machine.
You can use the "File Browse" item to upload any file you need from your local machine and into a database table. The default APEX configuration (in the dads.conf file) stored the uploaded file in a table called wwv_flow_file_objects$. In your application, you can access this table using a view called APEX_APPLICATION_FILES.
After you uploaded a file, any user can access it, using the download procedure described in the reference I gave you. The download procedure gives you an option to store the download file anywhere you need, using the "Open/Save" dialog box.
I believe this is covering everything you need. If you still having problems, please consider posting the relevant application pages on apex.oracle.com. It will be easier to understand and help you.
Regards,
Arie.

Uploading a file to the web server

How can i upload a file to the web server using JSP.

hello sir,
Could U even tell me performance which one is better.
U have mentioned that Multipartrequest is Complex for Beginers,
but as far as performance is concerned which is better.
If Taglib is used is it error Free , as I do not know much abt taglib.
have just read a little abt it , have never created my own Custome Tag.
Could U just Guide me which is the best site where I could get know a little abt Taglib.An easy tutorial where I could read and start working on My application.
I have been given a Deadline. So Please help me man.
If U have the source Code for Uploading of a File Please Cut Paste it.
I have to finish the project on time .
Please
With Regards
Eklavya

Uploading the file into XI Appl Server (AL11)

Hi Guys,
Iam trying to Upload the file into XI Appl Server (AL11) using SXDA_TOOLS.Can anyone tell me the parameters that i need to pass (Object Type,Program Type,Program etc...) in SXDA_TOOLS for uploading the file.
Thanks,
Kittu.

Object type     BUS3060
Program type    DINP
Program         RCCLBI03
File type        Phisical file name
File Name       /tmp/filename.txt
click on Copy (Ctrl+F5) and enter the source file name by selecting the presentation server from Source frame and target file name by selecting the Application server in the Target Frame.
Hope it'll help you.
Regards,
Eswar.

Urgent - Upload a file from Client to Server.

Need to load a file from the client machine to the Server running 9iAS Rel. 1 on a HP Unix Machine.
We are using Forms 6i. We have looked into the File Upload Utility demo code provided with Forms 6i - but have been unsuccessful in reusing it. PLS HELP

Duplicate post.
Upload a file from client to server by forms in E-Bussiness Suite R12
Re: Upload a file from client to server by forms in E-Bussiness Suite R12.

Is it possible to upload large files through FTP to server with iWeb?

Is it possible to upload large files through FTP to server with iWeb like for example with Cyberduck?
I don't need to publish website with files, I just need to upload files on server. Can it be done somehow with iWeb?

Here's some info about FTP...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
Make sure you are allowed to store files on your server. Most hosting services don't allow anything to be stored that can't be accessed via the internet. Check the fine print!

Automatically updating files on local testing Server

I'm using EasyPHP-5.3.5.0 as a testing server on my local machine (I've use EasyPHP for several years). I set up the Site Definition in DW8 using the testing server root folder (www) as the development area; however, this caused problems when I attempted to upload from within DW to the Remote (production) server. I then modified the Site Definition to use a local folder. other then the Testing Server folder, for development which solved the upload problem. Then in the Site Definition I setup the Testing Server using the "PHP MySQL" model with "Local/Network" access. The Testing Server folder was set to "C:\Program Files\EasyPHP-5.3.5.0\" and the "Refresh Testing file list automatically" box was checked. The URL prefex was set to "http://127.0.0.1:8888/" as defined in the EasyPHP instructions. My problem is that Dreamweaver is not updating the files on the testing server when I save a file in the development folder. The development folder and the Testing Server reside on the same computer. If I copy and paste a file to the testing server everything works fine. I would like the testing server files to be automatically updated when I save a file in the development folder which is what the Site Definition seems to indicate should happen. Any thoughts on what the problem is and how to fix it would be appreciated.

> UPS tools that will only accept POST data coming from an
https page
Oh - I see. I think this will be hard to do. You'd need to
get a local
certificate and all - not sure how to go about that....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"(_seb_)" <[email protected]> wrote in message
news:ev39uo$pm3$[email protected]..
> Murray *ACE* wrote:
>> Why do you want to do this?
>>
>
> to test locally?... I've been able to test everything
locally so far on my
> virtual testing server, and thought it'd be nice if I
could test the
> shopping cart locally as well. But it uses third party
UPS tools that will
> only accept POST data coming from an https page.
> And yes, I'm pretty sure it's a stupid idea... But as I
said, maybe
> there's a trick I'm not aware of...
>
> --
> seb ( [email protected])
>
http://webtrans1.com | high-end web
design
>
> An Ingenious WebSite Builder:
http://sitelander.com

Problem on loading DAT file when using 3G network modem

Hello,
I'm having some strange problem when I'm trying to load my game on the part where DAT file with Map Object is read, using 3G Network Modem. This issue started when I migrated my applet from one host to another. Everything loads well, until the user authentication. On user authenticatiom I'm recieving map name which I should load and show the user on it. I'm recieving the message where map name is mentioned, but after, when the process of loading map begins(when I need to read DAT file which is only 15KB) application blocks(browser and JVM also block).
I thought it could be because of slow network communication, but it's not the reason, since I have tested(using Bandwidth limiter software) with 5 KBs/Second and it loads well and application is running well.
Any clue why this can happen? If code is needed I'll post some pieces related to the process of map creation.
URL or application: [ http://mimosa.dei.uc.pt/serhiy/demo/hoonline.html|http://mimosa.dei.uc.pt/serhiy/demo/hoonline.html]
Accounts: test01/test01 ... test0n/test0n ... test05/test05 (n is number from 1 to 5)
Thanks in advance!

You have to upload it with FileReference.upload() to a PHP
(or other server-side) script which saves it to a folder on the
server. When the DataEvent.UPLOAD_COMPLETE_DATA event has been
dispatched you can then use the FileReference.name to load from the
file on the server just like any other image.

Lost option to upload related files when using testing server.

Similar Messages

Maybe you are looking for