Lost Registration of Adoble X Pro

Purchased PHYSICAL edition of Adobe Acrobat X Pro a few years, but I can not locate registration of product and/or Serial Number online "MyAdobe" which I need to download it to new computer. What do i need to do to download Adobe Acrobat X pro to new computer?

If you never registered the product then it will definitely not appear in your account online. If you did then there is a possibility that the serial number will be there, but not any download option since you purchased the physical edition (I am assuming that means you purchased a disc). Your serial number should be on the disc case/box.
Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Similar Messages

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time.How can I recover this data

I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time. How can I recover my documents?

If you never saved, auto save does not kick in.
Peter

Can someone please help a friend of mine get a permanent registration key (not a trial key that expires in 30 days) to replace his lost registration key for Adobe Photoshop CS2? His previous hard drive crashed and he no longer has his registration key. Th

Can someone please help a friend of mine get a permanent registration key (not a trial key that expires in 30 days) to replace his lost registration key for Adobe Photoshop CS2? His previous hard drive crashed and he no longer has his registration key. This is vital for his wedding business.

Thanks to everyone for the tips on my CS2 question. It turns out in the end it was some plug-in filter software that was causing the glitch, not a lack of an Adobe registration key. As for why he still uses CS2, it does the job for him, so that's all he needs.

I have lost facetime on my macbook pro. Calls ring but message says fail

I have lost facetime on my macbook pro. I place the call, it rings then says 'failed'. Has been working very well until now. Any ideas anyone? Thanks.

Hello lindseynicola,
Thanks for using Apple Support Communities.
I understand that you're having issues with making calls using FaceTime on your Mac. I'd like you to take a look at the following troubleshooting information, in order to get this issue resolved:
Troubleshooting FaceTime for Mac
You can make FaceTime calls using the FaceTime app. You can call FaceTime users whose contact information is in Contacts. You can add contacts and edit contact information in either FaceTime or Contacts. To place a video call, you may use a phone number or email address.
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
Verify that the Date, Time, and Time Zone are set correctly:From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
Verify that both parties are connected to an active broadband Internet connection.
See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Verify that both parties have installed the latest software updates for their Mac and/or device. See:
Mac OS X: Updating your software
iOS: How to update your iPhone, iPad, or iPod touch
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
Take care,
Alex H.

How do I enter my new registration number for Quicktime Pro?

How do I enter my new registration number for quicktime pro?

Open QuickTime Player 7 and then the Edit menu / Preferences / Register

Help,just entered registration code for quicktime pro,help needed

Help,just entered registration code for quicktime pro,help needed,cant seem to see the quicktime pro screen i saw on internet with all the edit and extra things at the top,i dont understand this,any help,Dave

I hope this helps http://support.apple.com/kb/ht2240 good tips on your prob here..good luck

Lost sound in final cut pro 7

I need help. I have lost sound in final cut pro 7. Everything has sound and plays on the desktop just fine, and when I import it into FCP I can see the sound bars moving and the sound tab shows sound, but you cannot hear the sound. Please help. randall

Check the setting in View > Audio Playback:

Reinstalled os x, lost registration for quicktime

reinstalled os x, lost registration for quicktime, is there a way to get it back. or do i need to purchase it again. i had set up in my e-mail a "from mac folder" that went away.

Go in to the Apple store and look for "Previous Purchaces" or something to that effect. It will be there.
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
http://iMovie.danslagle.com

CTI Route Point lost registration to callmanager

one of my RP lost registration to the callmanager and I can't see why. I have several configured and the others are still registered except for this one. I need assistant on get it back up and running. please advise.

This is critical and I just resolved a similar problem. A call control group was not properly configured on Node 2 only Node 1 ports where setup. There are 2 possible methods. Remember, make sure your RMCMuser account a password are working. These CTI ports are created on CUCM via UCCX and should be deleted from UCCX when changing or rearranging. Step 1. Take a snapshot of the CALL CONTROL group so you can recreate it faster. Delete the group in UCCX. Step 2. On CUCM PUB, look for DEVICE PHONES associated to port numbers allocated IPPCq_12XX. etc.. DELETE these associated numbers. Step 3. On CUCM PUB check CALL ROUTING, ROUTe Plan Report, UNASSIGNED DN's. look for same DN's associated to CTI 12XX. ect.. DELETE. btw,, you should clean up the UNassigned DN's in general maintenance too!. STEP 4. On UCCX rebuild your CALL CONTROL group. IF that does not work then repeat all the same steps. On UCCX stop Services, NODE MANAGER, both if HA. Then on CUCM PUB, SERVICEABILITY, Control Center - Feature Services, CM Services, SELECT Cisco CTIManager , RESTART button below. Then START UCCX PRI NODE MANAGER, then UCCX SEC. Node Manger. On UCCX PUB,, rebuild CALL CONTROL GROUP... should fix.

WIP 310 Lost Registration

Hi All,
I just got a WIP 310 a couples days ago and found that it's always lost registration after idle for a while. Does anyone have the same problem or know how to solve it?
Thanks in advance!
-wshngai

I have the same problem. I read somewhere that it was not as bad with the screen saver turned off. So I turned mine off and now it only un-registers a couple times a day (which is still annoying). Trouble is, the battery doesn't last long at all when the screen never goes to sleep.
I found the "somewhere"... https://www.myciscocommunity.com/thread/3449?start=60&tstart=0
Message Edited by dmkoscinski on 10-25-2009 07:36 PM
Message Edited by dmkoscinski on 10-25-2009 07:51 PM

HT4137 lost registration code

hello,
I want to reset my old iPhone 4s, but I lost registration code, help

What is a registration code?
Never heard of this.

SPA525 Lost Registration Randomly

We have some SPA525G2s that are losing registration randomly. They are connected to a UC320 and SG500 Series switches. They're on the correct VLAN and the UC sees the switch as a CDP Neighboor. It's occured both with a hardwired phone and a wireless phone. Ideas on what I can check or a way to determine what's causing them to randomly lose registration? It doesn't happen every day but maybe once a week randomly.

Check the info page for the elapsed time to see if the unit had somehow lost power or rebooted when it lost registration.
In the info page, you'll also want to see if there's a reboot reason and see if matched up with the lost registration.
You can run a debug log, if the info page doesn't help in determining what is going on.
Debug log info at
https://supportforums.cisco.com/docs/DOC-9862

Lost my registration info for qt pro

I opened qt today to discover that my app is no longer registered and I don't know where the registration code is. Anyone know how to go about retrieving registration info?

Did you check System Preferences>QT>Register?
http://docs.info.apple.com/article.html?artnum=58453 QuickTime Pro Key: Retrieving a lost key

HT2376 QuickTime 7 Pro Lost Registration

I bought QT 7 Pro back in 2006 and recently had a total system crash where I lost everything. I have my original invoice receipt email but not the code. Is there any way to retrieve the code now? HELP!!

The Apple Store now only keeps records of purchases for the last 18 months, so they will not be able to retrieve a key from 2006. The email from Apple would have been the only way you could have gotten the key in the first place, so it must have been there at one time. If you no longer can find a record of the key and don't have a backup containing the QuickTime preference files, you'll have to purchase a new key.
Regards.

Lost registration info

I have a problem. In a recent move I have lost my FCP original disks (which isn't a huge problem since I have the software backed up) but when I copied all of my software from an old machine to my new MacBook Pro the FCP became unregistered and I can't find the number anywhere. (I usually save a copy of the numbers on my hard disk...don't know why this one is missing).
Question: Is there any place on Apple's site to find all registered software (and hardware for that matter) and the registration (or activation) info?
Rick

Are you saying that you simply copied the apps from one machine to the other? It's unlikely that you'll get the apps working properly without a clean reinstall anyway.

Lost Registration of Adoble X Pro

Similar Messages

Maybe you are looking for