Lost v 51 firmware features in E72 firmware upgrad...

Have not seen this in any thread. The 051.xx firmware upgrade resolved an irritating feature where the screensaver would kick in when you are reading email. Post my v74.xx upgrade this annoying feature is back. Any advice on how this can be resolved and am I the only one seeing this.

Its embedded, yes, but Nokia did not design the software. On further notice, since it is firmware embedded, user files, or systems files which change with usage of the phone has an effect on firmware updates.
Note that many bugs which occur after firmware updates are fixed by a hard reset+installation, meaning these bugs are user inflicted upon themselves. Files they have created, or system files created as they use the phone are apparently incompatible with the new update, rendering the installation of the update faulty.
Also firmware have been tested in Nokia labs before being send, what Nokia has no control over is the status of your phone, your PC and whatever occurs in the internet connection and lines as the data travels from the servers to your phone.
You can try to have the phone reformatted and firmware reinstalled in a Nokia Care Center as they usually get the updates in CD format, meaning these files they have are completely fine.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

Urgent firmware question (nokia E72)

i just update my nokia e72 firmware to 031.023...
but don have chinese in it....
do this new firmware got chinese + english version?
if got how i gonna to flash back to get it?

The product code of your device determines the language support for the firmware update. If you want to change the languages, you have to bring it in at a Nokia Care Point. Remember though, that at the next firmware update, the languages will be set to the original product code.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Where can i find Storedge firmware features

Hello!
Can anybody tell me where can i find documents describing new features for Storedge firmware releases?
For example, i need information to compare 06.60.11.10 and 06.19.25.16 versions.
Thanks in advance

tolik2525 wrote:
Hello!
Can anybody tell me where can i find documents describing new features for Storedge firmware releases?
For example, i need information to compare 06.60.11.10 and 06.19.25.16 versions.
Thanks in advanceUnfortunately we do not release such documentation that goes in depth with the differences between firmware releases. As far as I know this will change in the future, but I do not have any schedule and/or details.
Between 06.60 and 06.19 there is no new features, the 06.60 is only a sustaining release which includes bug fixes. New features are in 07.10 (for the ST6000 arrays) and they are described normally in the ST6000 Release Notes.
Regards

E72 Firmware Update: 31.023

Changelog:
* WAPI support for China
* Internet radio
* Smart Connect
* Bloomberg
* Advanced Communications Manager
Updated
* Freestyle email (2.05, BL3, csw.32.rd_email_10w04)
* My Nokia (4.1)
* Nokia Maps SR3
* Share on OVI (4.3)
* OviStore (1.5.436)
* Cherry (2.1)
* Browser 7.2
Corrections
Only major corrections listed.
• Stability improvements
o Memoryleak corrections to improve general stability
o Music player, radio, video recording, earphone, security sw and encryprion stability corrections
• Localisation corrections(MAPS, Calendar, Contacts, Email and Browser area)
Email improvements
o MFE activation registration correction
o Synchronisation correction to mailbox creation(like Yahoo and Gmail) for the first time
o Email editing correction(dubling of words when deleting suggestions)
o Correction to synchronization when syncing draft meeting request
o Set default setting “Sync while roaming” to “No”
o Sending message without password initials crash correction
o Messaging menu memory leak correction
Calendar
o Meeting request creation stability corrections
o Requiring meeting request corrections
o Meeting request saving correction if meeting request is saved before sending
o Meeting update send after editing request
Contacts
o Contacts stability improvements (arrow keys pressed rapidly before contacts are loaded, add searched contact to the goup without name, mail box removal, open/close contacts during call, conference call with two same name participants, … )
o Company name displayed in contacts
o Group deleting correction when goup is deleted from group edit view
o Contact group editing view corrections
o Contacts search corrections (Group cannot be searched after editing its conference service number, Image detail of marked contact is not displayed in search result, Group disappears when add contact to it in searched result view)
Home screen
o Missed call indicator removal correction after call has been accomplished form action menu
o Message notifier corrected when several voice messages received
MAPS
o New maps version included
o Free navigation
o Improved GPS handling
o Landmark corrections(land mark received vie MMS, Landmarks are not displayed when selecting places during planning route from landmarks application)
o Voice guidance corrections (turning directions, safety camera)
o Route planning/saving corrections
Browser
o Browser bitmap memory leak correction
o Browser closing stability improvement before connection is open
o Secure connection icon corrections (going to an other secure page, secure connection canceling)
o When moving multiple Bookmarks, the last selected Bookmark is not moved
o Bookmark icon correction
Other
o Spacebar stops working correction
o Emergency call correction when lock code query is on and call made quickly after power on
o Theme effects disabled by default
All from: http://dailymobile.se/2010/04/20/nokia-e72-firmware-updated-to-version-v31-023/

Changelog:
* WAPI support for China
* Internet radio
* Smart Connect
* Bloomberg
* Advanced Communications Manager
Updated
* Freestyle email (2.05, BL3, csw.32.rd_email_10w04)
* My Nokia (4.1)
* Nokia Maps SR3
* Share on OVI (4.3)
* OviStore (1.5.436)
* Cherry (2.1)
* Browser 7.2
Corrections
Only major corrections listed.
• Stability improvements
o Memoryleak corrections to improve general stability
o Music player, radio, video recording, earphone, security sw and encryprion stability corrections
• Localisation corrections(MAPS, Calendar, Contacts, Email and Browser area)
Email improvements
o MFE activation registration correction
o Synchronisation correction to mailbox creation(like Yahoo and Gmail) for the first time
o Email editing correction(dubling of words when deleting suggestions)
o Correction to synchronization when syncing draft meeting request
o Set default setting “Sync while roaming” to “No”
o Sending message without password initials crash correction
o Messaging menu memory leak correction
Calendar
o Meeting request creation stability corrections
o Requiring meeting request corrections
o Meeting request saving correction if meeting request is saved before sending
o Meeting update send after editing request
Contacts
o Contacts stability improvements (arrow keys pressed rapidly before contacts are loaded, add searched contact to the goup without name, mail box removal, open/close contacts during call, conference call with two same name participants, … )
o Company name displayed in contacts
o Group deleting correction when goup is deleted from group edit view
o Contact group editing view corrections
o Contacts search corrections (Group cannot be searched after editing its conference service number, Image detail of marked contact is not displayed in search result, Group disappears when add contact to it in searched result view)
Home screen
o Missed call indicator removal correction after call has been accomplished form action menu
o Message notifier corrected when several voice messages received
MAPS
o New maps version included
o Free navigation
o Improved GPS handling
o Landmark corrections(land mark received vie MMS, Landmarks are not displayed when selecting places during planning route from landmarks application)
o Voice guidance corrections (turning directions, safety camera)
o Route planning/saving corrections
Browser
o Browser bitmap memory leak correction
o Browser closing stability improvement before connection is open
o Secure connection icon corrections (going to an other secure page, secure connection canceling)
o When moving multiple Bookmarks, the last selected Bookmark is not moved
o Bookmark icon correction
Other
o Spacebar stops working correction
o Emergency call correction when lock code query is on and call made quickly after power on
o Theme effects disabled by default
All from: http://dailymobile.se/2010/04/20/nokia-e72-firmware-updated-to-version-v31-023/

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search

HT1338 upon updating itunes programs I lost the "burn" CD feature. How can I restore it?

Upon updating my itures program I lost the "burn" CD feature. How can I get it back?

iTunes 11 still burns cd's
Select the playlist of your songs and File > Burn Playlist

NSS6000 "Firmware Update Error: The firmware image file is corrupt."

Hello All,
I've recently run into a problem trying to update the firmware on our NSS6000 to either 1.20.1 or 1.21.0. We are currently running 1.16-3.
Each time after I click "Upgrade Firmware", the upgrade fails with the same error: "Firmware Update Error: The firmware image file is corrupt. Obtain another copy of the file and try the firmware upgrade again".
I've tried re-downloading the NSS6000_FW_1.20.1.tar.gz and NSS6000_FW_1.21.0.tar.gz several times from multiple PCs, and using multiple browsers. I've tried several combinations of Windows Server 2003R2, Windows Server 2008R2, Windows 7, and Firefox, Chrome, and IE 8/9.
The downloads all appear to be fine, and they all can open/extract with 7-zip without issue. The file sizes are always the same.
No combination of OS/Browser yields a different result on the upgrade attempt either.
I tried renaming NSS6000_FW_1.21.0.tar.gz to NSS6000_fwupgrade_0121.tar.gz to match the convention used in early versions (thinking that the extra "."'s could be the issue) but no luck either.
I was able to successfully re-apply the NSS6000_fwupgrade_0116.tar.gz firmware without any issues at all.
A strange thing I noticed, though, was on the "The system will reboot now. Please close your browser." window, it shows the device as an "NSS2000 2-Bay Gigabit Network Storage System" (please see attached screenshot). I'm chalking that up to a simple reusing-the-same-web-code issue rather than the root of the problem, but thought I should mention that as well.
Has anyone else run into this issue, or have any suggestions for workarounds in order to successfully upgrade the FW on this device? Thanks in advance for any suggestions.

Hi,
Not sure what is going on i haven't see the issue you are having, can you try downloading both images at a different location; instead of behind your router. Also upgrade to .20 and then .21. Im pasting the release notes upgrades step.
When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923) When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923)
If this don't help you might have to give us a call @ 1-866-606-1866 and open a support case.
Thanks,
Jasbryan
Cisco Support Engineer

Upgraded to OSX 10.7 and lost Acrobat Professional 8 features on Pro X

Upgraded to OSX 10.7 and lost Acrobat Professional 8 features on Pro X that came with the OS.
Do I need to purchase a new license? Seems a little harsh considering the entire CS suite had to be upgraded...

Apple clobbered the PS drivers - the fix for this has been poseted - see:
https://discussions.apple.com/message/15498216

WRT300N Firmware v0.93.9 - which upgrade version can I install?

I think I can upgrade my firmware, but I don't know which version.
The firmware version on the web interface says v0.93.9. But the version on the CD says 1.3. Neither of those choices are available when I go to the Download page at Linksys.
Can someone tell me which firmware version I can safely upgrade my router to?
Thanks.
KWilder

Your router is WRT300N V1...
Download Firmware 3.00 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

We bought a time capsule then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now?

We bought a time capsule, 1TB, then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now? Does APPLE do not provide latest firmware for this item?

How old is that Time Capsule? The fact that it still have firmware 7.3.1 suggests that it's not the latest model. The latest firmware available for my two-year-old model is version 7.5.2. Apple does provide firmware updates. You just have to let the Time Capsule download and install them. Use AirPort Utility to do that.
Regarding your Wi-Fi problem, please explain what you mean by "it does not identify the existing wireless network".
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

SRW224G4 - cant manage with new firmware thru Xmodem (dead after upgrade)

Hi All,
Before i wrote this msg, i saw few threads aboud "problem with upgrade firmware". Today i've upgraded my Linksys SRW224G4 to newest 1.2.2b and... after rebot, switch was still rebooting. I found on cisco site how to solve the problem regarding this: http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
So, i've made RS232 (because i don't have orginal one ; pinout 1-1 2-2 3-3 4-4 5-5) and connected to console
The problem is with hiting ESC on POST screen. My hyperterminal freezes So, i can't upload my files
Files: SRW224G4_fesm-12216.ros ; ls_106-12216.ros ; SRW224G4-1.0.0.61
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
Download failed
Perform WARM BOOT ...
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Downloading code using XMODEM.
When i try to send SRW224G4_fesm-12216.ros now, HT freezes too
Guys, what shall i do now ?
I think the RS232 cable is ok, pinout is linke normal DB9 one-to-one without crossing 2 with 3 pin.
Best regards, w8ing 4 any help.

So...
I've solved it
Problem was with settings in HT and sending ESC chacter
thank U ;D

I have an RVS4000 with V1.1.09 firmware... the firmware is too old to update to the new 1.3 how do I update my firmware

I have an RVS4000 with V1.1.09 firmware... the firmware is too old to update to the new 1.3 how do I update my firmware
Does anyone have an older version of the firmwre, as Cisco has conveniently removed all older releases of the firmware and only has a utility so I can not load the software via the router.

You would need to contact SBSC and ask for firmware 1.1.14.
Here is a historic thread about the firmware upgrade issue.
https://supportforums.cisco.com/message/3099732#3099732

Open Firmware Password; not on Snowy Upgrade DVD; how do I get hold of it?

hey;
my MBP15 came with 10.5 & i got the snowy upgrade dvd from apple; there's no Open Firmware Password utility on the upgrade DVD (i even searched using pacifist) and it cannot be downloaded from apple's downloads. this seems a serious omission since i protect my mac (somewhat) with it.
does anyone know how i can get it, since i think it's pretty product specific; if it's actually different from the version on the original 10.5 disk that shipped with the machine or would some kind soul with the same machine (MacBookPro5,1 MBP51.007E.B05) have to share it with me?

actually, don't trust me; i'm wrong.
thank you so much, roam! you do indeed have to boot from the dvd!
what had me fooled is that pacifist didn't find it, and it used to be a discrete file which you could simply drag from the utilities folder of the install disk on to your mac.
i have now enabled the firmware password!
thanks again!

Seem to have lost air play ability via apple tv after upgrading to iOS5

seem to have lost air play ability via apple tv after upgrading to iOS5

Nope, i was able to download it in the Middle East...
Apple always releases updates to everyone in the same time... (unlike Android and Nokia)
Something is wrong...
What ou can do is unplug the appletv from the electricity and the hdmi, plug it ony to your laptop using a mini usb plug (the one used by many cameras and tech devices)...
Open itunes, find the apple tv, click on restore and let it download from laptop...
That oughta update the firmware to 4.4.1...

HT203167 I lost my ringtones from my phone when I upgraded to iOS 6 on my iPhone 4. They are still on my computer, but won't re-transfer back to the phone. I'm using the correct iTunes account. How do I get my ringtones back on my phone?

How do I get my ringtones back on my phone?
I lost my ringtones from my phone when I upgraded to iOS 6 on my iPhone 4. The ringtones are still on my computer and play in iTunes, but they won't re-transfer back to the phone. I'm using the correct iTunes account on both my computer and phone. In the iPhone view of iTunes on my computer, it shows that my phone recognizes that I had those ringtones, but there is an exclamation mark showing that my phone can't find the files. I can't delete these "placeholders" from my phone with the hopes of re-transfering the files back to the phone, either. I cannot just simply re-transfer the files from my computer back to the phone. It won't let me using the regular synch options and I can't find anything in the menus of iTunes to help me out either.
Any advice would be much appreciated.

Ignore. I figured it out:)

Lost v 51 firmware features in E72 firmware upgrad...

Similar Messages

Maybe you are looking for