Lots of serious problems.

About a week ago, i started having some major problems with my late 2009 MBP.
First off all, the trackpad does not click anymore. it doesnt have the click feel like it used to. if i click on the left side of the trackpad, it will not register, and i have to push with a good ammount of force on the right side of the trackpad to get a response. It's been so bad i had to go into settings and start using touch sensitivity. it's been a real pain and i miss the clicking.
2nd, if i pick it up by holding the front left of the computer when it's open (left of the trackpad, below the command keys) the computer shuts itself off with no warning.
Also, after some use the sound stops. i think it has to do with the front left side because when im playing music and rest my palm there, it makes an odd beep noise until i lift up my hand. when the sound stops entirely i either have to restart or close the computer for half an hour for the sound to go back on.
the computer runs fine, it's cool, cpu and memory run low, and it's still fast.
what is happening? it hasnt been dropped or gotten wet to my knowledge, and i live by myself so i think it's okay. what could be faulty?
i do not have a reinstall disk.

Rental insurance, parent/guardian rental/homeowner insurance. Any or all could help. Apple might charge more than you can afford, but only by taking it in can you tell for sure. If the price is more than you can afford, the following places may be cheaper:
http://www.dttservice.com/
http://www.powerbookresq.com/
http://www.microdocusa.com/
http://www.macspecialist.com/
http://www.techrestore.com/
Worst comes to worse, you could try to repair it yourself with instructions from http://www.ifixit.com/ and http://www.xlr8yourmac.com/ but you'd have to have a pretty good feel for what the problem is.
Good luck!

Similar Messages

  • Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Apple can replace the battery for $79 US.
    http://support.apple.com/kb/index?page=servicefaq&product=iphone

  • Serious problem of jdbc-mysql connectivity using tomcat

    hi everybody
    i m in serious problem since last 15-20 days. i m trying hard to make the connection jdbc-mysql using tomcat with the help of a jsp test page but every time i am facing almost the similar probems listed below in detail:
    to make sure that the jdrivers's .jar (mysql-connector-java-3.1.7-bin.jar) available for such connections working fine i have tried the above said connection without using tomcat....which is working fine...for this i have created a dummy database with a dummy table ..and written some queries in the .java file of my code which upon running inserts the specified values in the defined(dummy) database.
    this is the confirmation that the classpath etc..are ok in regard to the mysql-connector-java-3.1.7-bin.jar
    now i have placed a copy of this .jar file in to the commons/lib directory of the tomcat web server(which is suppossed to be the place for such external jars)
    after doing so i have followed 2 methods :
    method 1st:........
    i have made aone more jar file from the following .java file....
    import javax.naming.*;
    import javax.sql.*;
    import java.sql.*;
    public class TestSQLLoad
    String user = "Not Connected";
    String pwd = "no pwd";
    int id = -1;
    public void init() {
    try{
    Context ctx = new InitialContext();
    if(ctx == null ) {
    throw new Exception("Boom - No Context");
    DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/TestDB");
    if (ds != null) {
    Connection conn = ds.getConnection();
    if(conn != null) {
    user = "Got Connection "+conn.toString();
    Statement stmt = conn.createStatement();
    String q = "select name, password, id from user";
    ResultSet rst = stmt.executeQuery(q);
    if(rst.next()) {
    user=rst.getString(1);
    pwd=rst.getString(2);
    id = rst.getInt(3);
    conn.close();
    }catch(Exception e) {
    e.printStackTrace();
    public String getUser() {
    return user;
    public String getPassword() {
    return pwd;
    public int getID()
    return id;
    after compiling it at the cmd prompt i made a .jar file from the .class of it and named it MySQLLoad.jar...then i placed it also in to the commons/lib directory where the mysql-connector-java-3.1.7-bin.jar was already placed.
    then i have changed the server.xml and web.xml files from the conf directory of the tomcat as given here:
    server.xml
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="80" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <Context path="/testdb" docBase="TOMCAT_HOME/webapps/tomcat-docs/testdb"
    debug="5" reloadable="true" crossContext="true" >
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_DBTest_log." suffix=".txt"
    timestamp="true"/>
    <Resource name="jdbc/TestDB"
    auth="Container"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/TestDB">
    <parameter>
    <name>factory</name>
    <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
    </parameter>
    <parameter>
    <name>maxActive</name>
    <value>10</value>
    </parameter>
    <parameter>
    <name>maxIdle</name>
    <value>5</value>
    </parameter>
    <parameter>
    <name>maxWait</name>
    <value>10000</value>
    </parameter>
    <!-- MySQL dB username and password for dB connections -->
    <parameter>
    <name>username</name>
    <value>root</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>mysql</value>
    </parameter>
    <!-- Class name for mm.mysql JDBC driver -->
    <parameter>
    <name>driverClassName</name>
    <value>com.mysql.jdbc.Driver</value>
    </parameter>
    <parameter>
    <name>url</name>
    <value>jdbc:mysql://localhost/testdb?autoReconnect=true</value>
    </parameter>
    </ResourceParams>
    </Context>
    </Host>
    </Engine>
    </Service>
    </Server>
    and the other xml file i.e
    web.xml is here:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">
    <servlet>
    <servlet-name>default</servlet-name>
    <resource-ref>
    <description>DB Connection</description>
    <res-ref-name>jdbc/TestDB</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    <servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-cl ***>
    <init-param>
    <param-name>debug</param-name>
    <param-value>0</param-value>
    </init-param>
    <init-param>
    <param-name>listings</param-name>
    <param-value>true</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>invoker</servlet-name>
    <servlet-class>
    org.apache.catalina.servlets.InvokerServlet
    </servlet-class>
    <init-param>
    <param-name>debug</param-name>
    <param-value>0</param-value>
    </init-param>
    <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>jsp</servlet-name>
    <servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class>
    <init-param>
    <param-name>fork</param-name>
    <param-value>false</param-value>
    </init-param>
    <init-param>
    <param-name>xpoweredBy</param-name>
    <param-value>false</param-value>
    </init-param>
    <load-on-startup>3</load-on-startup>
    </servlet>
    <servlet-mapping>
    <servlet-name>invoker</servlet-name>
    <url-pattern>/servlet/*</url-pattern>
    </servlet-mapping>
    <!-- The mapping for the JSP servlet -->
    <servlet-mapping>
    <servlet-name>jsp</servlet-name>
    <url-pattern>*.jsp</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>jsp</servlet-name>
    <url-pattern>*.jspx</url-pattern>
    </servlet-mapping>
    <session-config>
    <session-timeout>30</session-timeout>
    </session-config>
    <mime-mapping>
    <extension>abs</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ai</extension>
    <mime-type>application/postscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aif</extension>
    <mime-type>audio/x-aiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aifc</extension>
    <mime-type>audio/x-aiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aiff</extension>
    <mime-type>audio/x-aiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aim</extension>
    <mime-type>application/x-aim</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>art</extension>
    <mime-type>image/x-jg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>asf</extension>
    <mime-type>video/x-ms-asf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>asx</extension>
    <mime-type>video/x-ms-asf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>au</extension>
    <mime-type>audio/basic</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>avi</extension>
    <mime-type>video/x-msvideo</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>avx</extension>
    <mime-type>video/x-rad-screenplay</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>bcpio</extension>
    <mime-type>application/x-bcpio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>bin</extension>
    <mime-type>application/octet-stream</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>bmp</extension>
    <mime-type>image/bmp</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>body</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>cdf</extension>
    <mime-type>application/x-cdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>cer</extension>
    <mime-type>application/x-x509-ca-cert</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>class</extension>
    <mime-type>application/java</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>cpio</extension>
    <mime-type>application/x-cpio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>csh</extension>
    <mime-type>application/x-csh</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>css</extension>
    <mime-type>text/css</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dib</extension>
    <mime-type>image/bmp</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>doc</extension>
    <mime-type>application/msword</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dtd</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dv</extension>
    <mime-type>video/x-dv</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dvi</extension>
    <mime-type>application/x-dvi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>eps</extension>
    <mime-type>application/postscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>etx</extension>
    <mime-type>text/x-setext</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>exe</extension>
    <mime-type>application/octet-stream</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>gif</extension>
    <mime-type>image/gif</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>gtar</extension>
    <mime-type>application/x-gtar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>gz</extension>
    <mime-type>application/x-gzip</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>hdf</extension>
    <mime-type>application/x-hdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>hqx</extension>
    <mime-type>application/mac-binhex40</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>htc</extension>
    <mime-type>text/x-component</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>htm</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>html</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>hqx</extension>
    <mime-type>application/mac-binhex40</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ief</extension>
    <mime-type>image/ief</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jad</extension>
    <mime-type>text/vnd.sun.j2me.app-descriptor</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jar</extension>
    <mime-type>application/java-archive</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>java</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jnlp</extension>
    <mime-type>application/x-java-jnlp-file</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jpe</extension>
    <mime-type>image/jpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jpeg</extension>
    <mime-type>image/jpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jpg</extension>
    <mime-type>image/jpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>js</extension>
    <mime-type>text/javascript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jsf</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jspf</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>kar</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>latex</extension>
    <mime-type>application/x-latex</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>m3u</extension>
    <mime-type>audio/x-mpegurl</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mac</extension>
    <mime-type>image/x-macpaint</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>man</extension>
    <mime-type>application/x-troff-man</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>me</extension>
    <mime-type>application/x-troff-me</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mid</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>midi</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mif</extension>
    <mime-type>application/x-mif</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mov</extension>
    <mime-type>video/quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>movie</extension>
    <mime-type>video/x-sgi-movie</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mp1</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mp2</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mp3</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpa</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpe</extension>
    <mime-type>video/mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpeg</extension>
    <mime-type>video/mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpega</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpg</extension>
    <mime-type>video/mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpv2</extension>
    <mime-type>video/mpeg2</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ms</extension>
    <mime-type>application/x-wais-source</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>nc</extension>
    <mime-type>application/x-netcdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>oda</extension>
    <mime-type>application/oda</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pbm</extension>
    <mime-type>image/x-portable-bitmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pct</extension>
    <mime-type>image/pict</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pdf</extension>
    <mime-type>application/pdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pgm</extension>
    <mime-type>image/x-portable-graymap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pic</extension>
    <mime-type>image/pict</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pict</extension>
    <mime-type>image/pict</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pls</extension>
    <mime-type>audio/x-scpls</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>png</extension>
    <mime-type>image/png</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pnm</extension>
    <mime-type>image/x-portable-anymap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pnt</extension>
    <mime-type>image/x-macpaint</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ppm</extension>
    <mime-type>image/x-portable-pixmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ppt</extension>
    <mime-type>application/powerpoint</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ps</extension>
    <mime-type>application/postscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>psd</extension>
    <mime-type>image/x-photoshop</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>qt</extension>
    <mime-type>video/quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>qti</extension>
    <mime-type>image/x-quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>qtif</extension>
    <mime-type>image/x-quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ras</extension>
    <mime-type>image/x-cmu-raster</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rgb</extension>
    <mime-type>image/x-rgb</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rm</extension>
    <mime-type>application/vnd.rn-realmedia</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>roff</extension>
    <mime-type>application/x-troff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rtf</extension>
    <mime-type>application/rtf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rtx</extension>
    <mime-type>text/richtext</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sh</extension>
    <mime-type>application/x-sh</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>shar</extension>
    <mime-type>application/x-shar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>smf</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sit</extension>
    <mime-type>application/x-stuffit</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>snd</extension>
    <mime-type>audio/basic</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>src</extension>
    <mime-type>application/x-wais-source</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sv4cpio</extension>
    <mime-type>application/x-sv4cpio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sv4crc</extension>
    <mime-type>application/x-sv4crc</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>t</extension>
    <mime-type>application/x-troff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tar</extension>
    <mime-type>application/x-tar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tcl</extension>
    <mime-type>application/x-tcl</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tex</extension>
    <mime-type>application/x-tex</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>texi</extension>
    <mime-type>application/x-texinfo</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>texinfo</extension>
    <mime-type>application/x-texinfo</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tif</extension>
    <mime-type>image/tiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tiff</extension>
    <mime-type>image/tiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tr</extension>
    <mime-type>application/x-troff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tsv</extension>
    <mime-type>text/tab-separated-values</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>txt</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ulw</extension>
    <mime-type>audio/basic</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ustar</extension>
    <mime-type>application/x-ustar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xbm</extension>
    <mime-type>image/x-xbitmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xht</extension>
    <mime-type>application/xhtml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xhtml</extension>
    <mime-type>application/xhtml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xml</extension>
    <mime-type>text/xml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xpm</extension>
    <mime-type>image/x-xpixmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xsl</extension>
    <mime-type>text/xml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xwd</extension>
    <mime-type>image/x-xwindowdump</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>wav</extension>
    <mime-type>audio/x-wav</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>svg</extension>
    <mime-type>image/svg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>svgz</extension>
    <mime-type>image/svg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>vsd</extension>
    <mime-type>application/x-visio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- Wireless Bitmap -->
    <extension>wbmp</extension>
    <mime-type>image/vnd.wap.wbmp</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- WML Source -->
    <extension>wml</extension>
    <mime-type>text/vnd.wap.wml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- Compiled WML -->
    <extension>wmlc</extension>
    <mime-type>application/vnd.wap.wmlc</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- WML Script Source -->
    <extension>wmls</extension>
    <mime-type>text/vnd.wap.wmlscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- Compiled WML Script -->
    <extension>wmlscriptc</extension>
    <mime-type>application/vnd.wap.wmlscriptc</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>wrl</extension>
    <mime-type>x-world/x-vrml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>Z</extension>
    <mime-type>application/x-compress</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>z</extension>
    <mime-type>application/x-compress</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>zip</extension>
    <mime-type>application/zip</mime-type>
    </mime-mapping>
    <welcome-file-list>
    <welcome-file>index.html</welcome-file>
    <welcome-file>index.htm</welcome-file>
    <welcome-file>index.jsp</welcome-file>
    </welcome-file-list>
    </web-app>
    after all this i have taken a jsp page whose code is here:
    (the mysql database used is named as "testdb" and the table name is "user" which is having fields name,password and id)
    <html>
    <head>
    <title>DB Test</title>
    </head>
    <body>
    <%
    TestSQLLoad tst = new TestSQLLoad ( );
    tst.init();
    %>
    <h2>Results</h2>
    User <%= tst.getUser() %>
    Pwd <%= tst.getPassword() %>
    Id <%= tst.getID() %>
    </body>
    </html>
    and placed it in to the Tomcat 5.5\webapps\tomcat-docs\testdb directory and saved as test-db.jsp
    when i run this page on the browser i get a lot may errors stating
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.4 logs.
    AND NOW WHEN just to get rid of such errords i try to include a statement
    <%@ page import="pkg.TestSQLLoad" %> in the jsp page code (and also place the MySQLLoad.class file in a folder called pkg and place it in the same directory where the jsp page is )and make it look like
    <html>
    <head>
    <%@ page import="pkg.TestSQLLoad" %>
    <title>DB Test</title>
    </head>
    <body>
    <%
    TestSQLLoad tst = new TestSQLLoad ( );
    tst.init();
    %>
    <h2>Results</h2>
    User <%= tst.getUser() %>
    Pwd <%= tst.getPassword() %>
    Id <%= tst.getID() %>
    </body>
    </html>
    now when i run it i get the following errors:
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP
    Generated servlet error:
    Only a type can be imported. pkg.TestSQLLoad resolves to a package
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    in response to the above error i have even tried placing the MySQLLoad.class directly in the testdb folder along with the jsp page without keeping it in a package named pkg and then importing directly as <@page import="MySQLLoad" %>
    that too gave me the following errors
    org.apache.jasper.JasperException: Unable to compile class for JSP
    Generated servlet error:
    The import TestSQLLoad cannot be resolved
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    and if i do not use the statement <%@ page import="MySQLLoad"%> then also i get the errors like
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 11 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 11 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    THE 2nd Method:
    in my second method i did the same changes in the web.xml and server.xml
    then i took a jsp page with the following code:
    <%@ page import="javax.sql.*,java.sql.*,javax.naming.*,com.mysql.jdbc.*" %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <HTML>
    <HEAD>
    <TITLE> trial doc </TITLE>
    </HEAD>
    <BODY>
    <h1>Trial Document</h1>
    <% InitialContext context=new InitialContext( );
    DataSource dataSource=(DataSource) context.lookup("java:comp/env/jdbc/testdb");
    Connection conn=dataSource.getConnection();
    Statement stmt=conn.createStatement();
    ResultSet rset=stmt.executeQuery("select * from user");
    if (rset.next()){
    %>
    <table width="100%" border="1">
    <tr align="left">
    <th>name</th> <th>password</th><th>id</th>
    </tr>
    <%
    do {
    %>
    <tr><td> <%=rset.getString(1)%> </td>
    <td><%=rset.getString(2) %></td>
    <td><%=rset.getString(3) %></td></tr>
    <%
    } while (rset.next());
    %>
    </table>
    <%
    } else{
    %>
    No results from query
    <%
    rset.close();
    stmt.close();
    conn.close();
    context.close();
    %>
    </BODY>
    </HTML>
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
    Generated servlet error:
    The type Connection is ambiguous
    An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
    Generated servlet error:
    The type Statement is ambiguous
    An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
    Generated servlet error:
    The type ResultSet is ambiguous
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(C

    thanx for ur response
    as u said that the problem is more of a jsp page not getting compiled....
    me also pointed towards the similar situation providing all the surrounding situations
    which i have met and gone through
    i m still thinking that problem may b in the tomcat's server.xml and web.xml as well
    so better if u plz guide me in that regard
    regards,
    kuldeep

  • Apple Have Serious Problems With 10.7.5

    Apple have very serious problems with their software and they do not have the courage to openly admit this to their customers. My company has been dedicated to Apple and all that is good. We have 2 Imacs, I macbook Pro, 1 mac Mini, 1 mac mini server, 1 ipad, 4 iphones and peripheries. I am on the verge of placing them all on a heap and putting a sledgehammer to them all because I am certain that 10.7.5 is such a corrupted release that even Apple technicians cannot help. My company has been on more and more get around fixes that are becoming more and more complicated by the minute. For the last 4 weeks I have been working 8 to 8 daily including some of the weekends to try and fix things. I have had the pleasure (genuinely) of working for two days following a knowledgeable Apple Technicians instructions to resolve a cloud issue and as of today I sit with one imac completely unusable with all sorts of errors and malfunctions - all software based. Other symptoms on other hardware include error messages saying the computer restarted due to a problem with the computer - even though we are carrying out clean shutdowns or restarts; inconsistent acceptance of passwords to i cloud on most equipment but in particular as highlighted above; nearly all applications opening on restart (I do know how to shut that off - in theory!!!!!!!); frequent and very lengthy beachballs; keychain is an absolute mess, slowdowns to the extent that I have to work on three machines to get the minimum of work done; and other random malfunctions or error messages. Apple's positive attitude to its customers used to be second to none. It seems to me that software (and hardware) releases are now too rushed and Apple do not care about software failures but rely on customers to troubleshoot the glitches for them and do so under warranty or more likely care plan support at further cost to the customer.
    Just look at all the questions being asked by customers via web searches on the above issues and more. Lots of questions, no reliable fixes, and certainly no interest shown by apple to resolve the issues - in fact Apple have adopted the say and do nothing approach.
    I love the products and have been a loyal ambassador to Apple but now my stress level, and the inability of my company to engage its business put me on the verge of taking every item my company owns with an Apple logo and at least gaining some satisfaction by placing them all in a heap and smashing the lots with a sledgehammer (deliberate repeat as this is now a realistic option)
    It used to be a pleasure to use the products, and efficient. I am not looking for help on these matters as an Apple technician is working very hard with us but I feel he is as frustrated as us. We are nowhere nearer resolving our problems and almost daily there are other glitches emerging.
    Apple are losing their way. They must listen to the directions given them by their customers frustrations. 

    What happens when you click the button?

  • I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

    I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

    Hi Suzy Q,
    I can send and receive calls.
    I get "messaging stopped" when doing a lot of texts.
    Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid  on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
    When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
    It runs slow.
    I have 5 apps on here. I should be able to have a  lot of apps on here, and play music, and have files, and...and....and.
    I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
    When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
    I get VZWAVS has stopped. (not sure if those are the right letters)
    The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
    I get a black screen on occasion.
    sometimes the proximity sensor doesn't work.
    sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
    I soft reboot often--turn it off wait a bit and

  • A serious problem with Mac OS X

    Dear Mac Community
    Since I bought my first iPod (a 3G), I have been a fan of Apple. For years, I had wanted to make a switch to the Mac. About a month ago, I finally decided it was time to leave the M$ world, and bought a Mini.
    My overall experience has been nearly flawless, with no crashes, truly amazing apps that are mac only (like QS, adium, spotlight and the whole iLife bundle, to name a few) and a very good looking interface.
    You may've noticed the word "nearly" on the previous paragragh, and it's there for a reason. There is one serious problem I can't solve. I am Brazilian, and therefore, I speak and write mostly in Portuguese. But OS X has no support for the Brazilian layout keyboard. I have been after a solution since day 1 with my Mac, but all I have managed to find out is that there are tons of pages in the web about Portuguese speakers complaining that their keyboards don't work properly. Apparently, this has been an issue since Mac OS 10.0, and until Tiger there isn't a solution for it.
    There are many different hacks to try to solve this, and I've tried every one, but they are either buggy, or don't work properly with non-universal apps (including word), or aren't 100% accurate on the keys placement.
    The fact is, I write a lot for school, and I need a Brazilian layout keyboard. And my parents, who were also seriously considering switching, work a lot with translations, so it is even more important for them to have the right layout.
    I am going to send a complaint for apple regarding this, but I'm skeptical that I'll get a solution, since this has been a known issue for a long time.
    Sincerely
    Daniel

    There is another major problem with the layout I'm currently using which I forgot to say:
    - I can type accented letters with almost no problem (á, à, ó, é, etc), except for "è" (e + `), which shows up simply as "e".
    "That seems very strange to me. It could be something related to layout id's, which can easily be changed. Let me know if mine works with Word (I assume you are talking about Word2004 rather than the old WordX?)."
    I've checked that more carefully, and here's what I've come up with: Word doesn't change the layout to US, it simply stops recognizing the 12th key (the extra one) which is responsible for "/" and "?" (and therefore is fairly important)
    btw, I'm using Word 2004
    "Thanks. Feel free to email me details and screenshots if you like. Since no one outside Brazil is likely to have the special keyboard with 12 keys on the bottom row, it's somewhat difficult to build and test layouts like this. (tom at bluesky dot org).
    Try the one called winbrazabnt73.keylayout, which tries to put in the extra key. "
    There is one problem with your layout, which is the fact that no app recognizes the 12th key responsible for "/" and "?" (including Pages, which doesn't have this problem with the other layout I'm using).
    On the other hand, your layout manages to type the "è", whereas my other layout doesn't.
    In the site you provided above in this thread (
    http://m10lmac.blogspot.com/2007/02/fixing-brazilian-keyboard-layout.html), there is an image of different kb layouts available in Windows and OS X. If you could make the Windows Brazilian ABNT and it worked with Word, all my issues would be solved, since that's exactly the layout I'm looking for.
    BTW, thanks for all the support
    Best regards
    Mac Mini 1.83 GHz Core Duo 1 GB Ram 80 GB HDD Mac OS X (10.4.8)

  • Urgent! Serious problem with J2EE Classloader!

    Hi all,
    I'm having a serious problem with j2ee Classloading.
    I have "inherited" a J2EE application where all business classes (invoked by the EJB) are placed in the Application's Server classpath (Weblogic 8.1.4).
    Very bad because every time a class is changed the a.s. must be restarted.
    So I re-enginereed the package putting the business classes in a jar that is referenced by the EJB's MANIFEST file.
    This way all the classes would be loaded by the EJB classloader and no need to start/stop weblogic.
    Unfortunately it's not such !! I discovered that all business classes are loaded via REFLECTION
    Object objCommand = objClass.newInstance();
    Object[] param = new Object[1];
    param[0] = aDataContainer;
    objDataContainerReturn = (DataContainer) objMethod.invoke(objCommand,param);
    and the application server cannot find them using the standard J2EE Classloader mechanism.
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at irma.business.Dispatcher.callService(Dispatcher.java:70)
    Caused by: java.lang.NoClassDefFoundError: irma/utility/log/LogPrintStream
    at irma.business.service.LoginService.login(LoginService.java:79)
    On the other hand they're found if I put the classes on the application server classpath.
    Has anybody got advice for this ? Should I refactor the application giving up reflection ?
    Thanks a lot in advance.

    Reflection uses the classloader as well so it should work fine.
    A common cause of a NoClassDefFoundError is something in a parent classloader that refers to something only available in a child loader.
    For instance, do you have any of your application classes which are in the $CLASSPATH but reference something that is only (now) in the business.jar in your ear?
    -- Rob
    -- Rob
    WLS Blog http://dev2dev.bea.com/blog/rwoollen/

  • Why Apple don't fix half year serious problem with HD3000, Lion and Adobe products? Doesn't Apple really care about advanced users?

    Why Apple don't fix half year serious problem with HD3000 drivers, Lion and Adobe products? Doesn't Apple really care about advanced users?
    I have Mac mini and Macbook Pro 13". Bouth with HD3000. And I can't work at all. With Snow Lepard I had no problems. It's tiny problem in code. And such pain for lots of users!

    If you have a problem with Adobe products, voice your issues with them.
    It is the software developers responsibility to maintain compatability
    with any operating system, beit OSX or Windows.

  • Apple please read: Serious problem with Spotlight indexing!

    My MacPro has a serious problem and I don't know what to do: Spotlight has been indexing for two weeks now, day and night. When I click the spotlight icon, the info box says that it is "calculating time", which I guess means that OSX tries to find out how long the indexing will take. Consol reports this line again and again (for the last two weeks):
    "...pple.launchd(1) (com.digidesign.fwfamily.helper (10466) posix_spawnp/"/Library/Application Support/ Digidesign/fireWire/DigidesignFireWireHelper", ...): No such file or directory"
    I removed Digidesign ProTools from this Mac two months ago, and I thought every files were removed. Obviously, Spotlight is trying to remove a file it cannot find... When I set all files to visible (with Terminal), there is NO file with the required name on my Mac.
    What is the solution? How do I get rid of this problem? It creates other problem, like stopping any security update I try to install. It also makes saving files veeeery slow, and applications freeze with the spinning wheel for half a minute or more quite often.
    I tried to reinstall MacOSX (archive and install), but it did not help. Then I had to authorize lots of plugins (for my music software) again, very annoying (and I lost some authorizations).
    Any serious help is what I need.
    Message was edited by: Helge Krabye

    Helge Krabye wrote:
    "...pple.launchd(1) (com.digidesign.fwfamily.helper (10466) posix_spawnp/"/Library/Application Support/ Digidesign/fireWire/DigidesignFireWireHelper", ...): No such file or directory"
    Hi!
    This is another problem that is not related to Spotlight...
    launchd is the (sort of) mother of all processes on Mac OS X.
    It looks for "LaunchDaemons" and "LaunchAgents" in two folders "/Library" and "/System/Library" (there should be subfolders with the name "LaunchDaemons" and "LaunchAgents").
    Go into these subfolders and delete any trace that's left from Digidesign Protools...
    That should help to get rid off the error messages.
    Then look for other Console messages that start with "mds", "mdworker" or alike. The name of every process that is related to Spotlight starts with the letters "md" (metadata)...
    Check with the utility Activity Monitor which process is hogging CPU and/or disk...
    Cheers,
    Walter

  • When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.

    What can I do to start the program again, when it does not answer? The only message I get is that there is a serious problem.

    Thanks a lot for your quick reply! However, it works again, after a restart!
    Best regards,
    Hans
    Hans Storhaug
    Director
    Norwegian Emigration Center
    4005 Stavanger
    Norway
    m  +47 908 31 097
    9. juli 2014 kl. 10:57 skrev Mylenium <[email protected]>:
    When I try to open Adobe InDesign, I get this message: Adobe InDesign terminated because of a serious problem/ fault. Start again to restore work in InDesign documents that has not been archived.
    created by Mylenium in Adobe Creative Cloud - View the full discussion
    Without knowing anything about your system, nobody can advise. In any case, the ID forum would be a better place to ask such questions.
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6535011#6535011
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • LUT Loader or adobe gamma realted software of startup program in CS3? serious problem here with cali

    Hi!.
    I have serious problems with calibration here.
    White turns to maroon while going gray.
    Something is going on very bad.
    I have installed PS3. I´m told to remove any LUT loader or whatever photoshop installs on the system in order to leave my own profiles load.
    I don´t find any kind of loader, and i´m quite worried about what´s going on with the color here.
    I use equipment for photographer: 10bit NEC screen (multisync LCD3080UX+) and Matrox Parhelia 128MB graphic card. The software is Monaco Optix with BasicColor together, using a MonacoOptix XR calibration hardware.
    I do everything correctly, and this goes wrong. Can you please help me or redirect me somewhere better?.
    Thanks a lot. I need serious help here. Please, answer only if you know what are you talking about.

    The profile is corrupt, doesn't matter which system it is a very old problem that has shown up in quite a while. Find in which directory the monitor profile is located trash it so that you do not overwrite it when making a new one and then make the new one.
    Or go Nck's way and continue to have the problem.
    Good luck.
    Oh, yes thank you Ramón, don't take that serious who ever told him such a thing is not well inform and has greatly exaggerated the problem.
    Having and amusing symptom of sometimes repeating what you said three minutes ago without really recalling ever saying it is not a not exactly a symptom one would have from a severe head injury. Having an unnoticeable paralysis to one side of the face that keeps improving over time is also not a symptom of a severe head injury telling some one that if you survive the injury then there is not much affect it has on your life is probably a misunderstanding by someone who is a bit unrealistic about many things in life.
    And of course Nick is just showing the world exactly how big he is and make no misunderstandings about this we have a pretty good idea how big you are, my sympathies.

  • Rollup aggregate.. serious problem!!

    Hy expert's, i have a serious problem: i don't rollup and compress aggregates.
    The infocube in object have about 28 million record's and after i have disactived his aggregate's , now is not possible to rollup data inside: more precisely on SM50 transaction i see some job's are doing insert operation on /BIC/E00.. table's but they are empty.
    Could you help me!!!
    It's very important.
    Thank's a lot.
    Sincerely yours.
    Andrea M.

    The aggregate table's are filled after a long time because the infocube had a lot f records. The aggregate filling is lasted about 8 hours!!
    Andrea

  • Adobe premiere has encountered a serious problem

    Hi, i have a new macbook 15" pro with retina and whenever i am working in premiere pro it crashes and comes up with a message that says "adobe premiere has encountered a serious problem"
    please help, it's killing me!

    What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
    CS6 (I don't know what number/update)
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
    Yes.
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    Mac OSX v10.7.5
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
    MPEG 4 - Movie
    If you are getting error message(s), what is the full text of the error message(s)?
    Sometimes an error message doesn't even pop up anymore, it just shuts down. But it was saying "Adobe Premiere has encountered a serious problem and needs to shut down immediately."
    What were you doing when the problem occurred?
    Dragging video into the timeline.
    Has this ever worked before?
    I've had no problem with it up until this point.
    What other software are you running?
    I've shut everything else down when I'm working on this.
    Do you have any third-party effects or codecs installed?
    No.
    Does the problem only happen with your final output, with previews, or both?
    It's just when I'm working on it. I haven't been able to finish the product because of how much it keeps shutting down.

  • Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

    Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
    == URL of affected sites ==
    http://www.hotmail.com

    We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

  • What do i do ? My i phone 4 has no option to reduce the motion picture. It is causing me a serious problem. Can anyone please help ?

    After several attempts to get some help from Apple, it has become clear to me that my i phone 4 has no options within accessibility to reduce the motion picture.
    I have a serious problem with the new software but unfortunatly i cannot go backwards with this update. Apple for obvious reasons will not advise any downgrading options. Can anyone please help me? Is there a third party option here. I do not want to pay for a new phone or replace the i phone as i run a mac,desktop and i pad... !! Thank you.

    Giansh2006 wrote:
    I don't quite understand why you have asked me about why I'm keeping my URL secret?
    It's only that I'm not clear why you are reluctant to post it. If you have a podcast in the iTunes Store then it's there for the world to see - they might search on its subject or title, for example, even if they don't actually know about it from you. If you look at other posts in this forum you will see that usually people post their URLs and then I can examine the feed and hopefully find out from that what the problem is. Without this information no-one can give you anything more than wild guesses.
    If you are still reluctant to post the details and want to have a bash at diagnosing the problem yourself you may find my web pages helpful:
    How do I make a podcast?
    how to diagnose a podcast feed
    Why don't my podcast episodes show the podcast image?

Maybe you are looking for

  • My computer has an error message that says. Opening J.Peg

    I have a new born and my wife is going crazy, The other day we had a power serge in the home and she was in the process of trying to upload pictures of the little one on to our Mac Desktop. When she turned on the computer some the SD card no longer w

  • How can i change my switch my app store to Japanese

    I IVE IN JAPAN BUT MY APPP STORE ARE POOPING AMERICA HOW DOI SWITCH BACK TO JAPANESE STORE ? THANKS

  • Macbook pro blue screen with spinning disk, won't start up. desperate!!!

    macbook pro blue screen with spinning disk, won't start up. desperate!!!  i'm a student and have a paper due tomorrow. my macbook was really sluggish so i ran a hardware test. it said NO PROBLEMS. i did restart. my current login and password were REJ

  • BDBG : IDOC_INPUT_INTERNAL_ORDER_CREA deleted

    Hi, I tried to change BUS2075 business object's CREATE interface's inbound function module in BDBG . I created a Z copy of IDOC_INPUT_INTERNAL_ORDER_CREA in a Z function group and input it in the dialogue box. BDBG asked me for an access key for whic

  • Blocking of deleted materials in SO creation

    Hi everyone.  Please teach me how to block deleted materials in SO creation.  Currently, when a deleted material is encoded an information message is displayed "Material # is marked for deletion".  SO is still created.  How can I make it an error mes