LOV Values Are Not Preserved After Redirect

Hello,
I have a page where I have two LOV's on top of the page and interactive report is generated based on the values from LOV's.
The values are passed to IR report correctly. MY problem is when I change values in LOV 2, LOV 1 values are getting reset.
Both LOV's Display As is set as Select List with RedirectHow can I make sure that LOV values are preserved even if I change values in either any one of the LOV?
I am using APEX 3.2
Thanks and regards
Edited by: ponic on Jun 22, 2011 7:54 AM

Thanks for the suggestion.
I have found another way to resolve my problem.
http://djbramer.blogs.plymouth.edu/2006/08/14/apex-parent-child-select-lists-and-onchange-submitting/
By following the above I could preserve values in my LOV's
Regards

Similar Messages

Lov Values are not showing for Discoverer Reports in Application

Hi,
I developed some discoverer reports, those reports having parameters with LOV. Those LOV values are showing in Discoverer Desktop, but after registering those reports in Oracle applications those LOV values are not showing. Pls let me know how resolve this issue.
Regards,
Hanimi.

Hi,
Also it is necessary to know how the LOVs are defined. Are they based on Application flexvalues for example? In which case it may be that you have not got your NLS language parameters set correctly when connecting from Applications.
Rod West

New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

Prompt constrain - prompt values are not refreshed after change in calendar

Hello,
I have prompt with Date, OrgUnit and Employee field in OBIEE 10g.
Date - calendar component "date between"
OrgUnit - multi-choice
Employee - multi-choice
I have checked "Constrain" checkbox on Employee field, because I want to show only employees from selected OrgUnit and also I have checked constrain on Date field.
After first selection everything works fine. I select some dates (I have calendar component - date between), some OrgUnit and I can see list of employees constrained by selected OrgUnit and Dates
- physical select is executed to get list of employees to multi-choice component
After that I change date interval, open employees multi-choice component but no physical query is executed and I will get back some cached result from previous request.
It seems that change in calendar component does not force refresh of data in other constrained components.
If I select some other OrgUnit, Employees are refreshed.
I tried to change component for Date from calendar to multi-choice. After some change of dates in multi-choice component. OrgUnit and also Employees are refreshed.
I also tried some different combinations of constrain checkboxes but with no success
So my question is: How can I force refresh (force execution of sql query) data in constrained fields after some change in calendar component?
Thank you

In my case It doesn´t refresh after change in calendar component. It does refresh after change in multi-select promot, or dropdown component, but doesn't refresh after change in calednar component.
BI server cache is not enabled.
If I open employee multi-choice component for the first time, physical query is executed. I change date to some other, open employee component for second time and no query is executed and I will get old values from previous action...

After doing the recording for transaction fpcj, the values are not being se

after doing the recording for transaction fpcj, the values are not being sent to the g/l.

HI,
When you are recording.. you might be creating the values... ensure that they are updated into the GL before u write program. I doubt you might have missed the save ..
Thanks
Mahesh

Qty and value in PO list are not updated (after a Service Entry)

Hi Experts,
Qty and value still to be delivered in the ME2L are not updated:
I have performed a service entry (ML81N) but qty and value are not updated in the list of the PO in the ME2L.
Could anyone explain?
Many thanks in advance.
Regards,
Cesar

Thanks for quick reply.
I do not configure anything in SPRO (Define release strategy for SES) but I got a red light in the top of the screen near the field "No acceptance" so I presume that the SES should be accepted but as I do not configure anything regarding release startegy, I do not know how to accept the SES.
Besides, I cannot perform MIRO: when I put the PO number, system indicates that there is no (suitable) item found for PO
I should have miss something. Could you please guide me?
Thanks,
Cesar

Values are not populating...

After selecting the data from LOV the values are not populating in the respective fields.
i've checked the 'LOV' no problem in that,but im think below coding have a problem.
declare
     b boolean;
begin
     :global.job:=null;
     clear_form(no_validate);
     b:=show_lov('view');
     :GLOBAL.ADDNEW1:=0;
--     go_block('JOB_CARD_MAIN');
     GO_ITEM('JOB_CARD_MAIN.BRANCH_CODE');
     set_block_property('job_card_main',default_where,'job_no='||chr(39)||:job_card_main.job_no||chr(39));
     execute_query(no_validate);------after this line get execute the values get disappear from the field
     insert into da.mylog(username,tname,mdate,oper) values(user(),'Job Creation',sysdate,'S');
     commit;
end;
Pls help..

Which trigger do you have this code in? I'm guessing it is a Key-ListVal trigger.
Have you tested the WHE RE clause in SQL*Plus to ensure it returns a record set? Most likely, the query returns no rows which could explain why the block is empty. Also, why are you clearing the entire Form instead of just the JOB_CARD_MAIN data block? Perhaps you should try:
Go_Block('JOB_CARD_MAIN');
Clear_Block(NO_VALIDATE);Also, the EXECUTE_QUERY built-in does not have a NO_VALIDATE parameter. It only supports the following parameters:
ALL_RECORDS
FOR_UPDATE
or the combination of the two (ALL_RECORDS,FOR_UPDATE). It also allows you to set the Locking mechinism by passing the parameter NO_WAIT.
Just a suggestion, try your query in SQL*Plus to make sure it produces a record set and Comment out all the extra stuff in your code and only keep the SHOW_LOV, CLEAR_BLOCK, SET_BLOCK_PROPERTY and EXECUTE_QUERY to see if a row is returned. If yes, then add the rest of your code back one line at a time.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

GR/IR A/c Amount and Amount in local Curreny values are not matching

Hello Gurus
When we are doing MIGO for some Scheduling Agreement PO's the Amount and Amount in local currency columns are mismatching with paise (+/-), eventhough PO belongs to Local Currency (INR). Because of this GR/IR account is not cleared after MIRO through F.13. Both MIGO and MIRO amount are showing as Open items.
Why it is happening and what is the way to clear GR/IR A/C. (F.13 with Tolerance limit is also not workout).
Thanks & Regards
Venkat.P

Hi sridhar
Thanks for reply
Through MR11 also these values are not cleared.
Regards
Venkat.P

Screen values are not retained in Tcode BP, onclick of SAVE button

Hi,
In Tcode BP, I am selecting a Role with the Business Partner number. COMPANY CODE Push button on the Top is Enabled and Click on that.
Enter the Company Code and provide the Account management tab by providing Reconciliation Acct 120113, Sort key as 035, Planning Group as E1. Go to Payment Transaction Tab, Enter the Payment terms as Z003, check Record payment history. Now, Click on SAVE Button on the TOP.
The issue is that, The screen values are not retained in the Payment terms tab and Customer is not Created after saving of a BP Number which is related to a Customer.
Regards,
Deepthi.

OSS Note 1254214 is applied and it is solved.

Forms values are not displayed correctly

This is happening on the client view. I have a custom form and after some Windows updates on user's laptop, the text field values started stopping to display in the form. If I click on View mode then the text values shown and change back to Edit the form
now text values show up in the text field.
Another thing is when trying to print the view out, text values are not shown up at all. I tried to upgrade user to IE11 and same issue. Using Firefox then text values are shown in print preview but not in Editing. I don't want users to use different browser
rather than IE.
Any thoughts on this would be much appreciated.

Hi,
Since the issue happens after some Windows Updates, I would suggest the user log on another machine and see if the issue persists. If the issue only happens on this laptop, you can manually uninstall the update patch you doubt to test
the issue. Go to Control Panel->Programs and Features->View installed Updates->”right click” and “uninstall”.
Meanwhile, add the SharePoint sites to a trusted zone in IE settings.
Thanks.
Tracy Cai
TechNet Community Support

Updated (VORowImpl ) values are not reflected in inline POPUP table

Hi Expert,
Currently i am getting exception when i try to update my iterator binding,
Here is my use case,
I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
Then i used the following code
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
itrBinding.executeQuery();
itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
Thanks

Thanks Frank, Actually i am accessing the client method as follows,
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
empoyeeVO.methodName();
May i know what is the different between accessing the method as shown above and access via the MethodBinding?
How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
Thanks
Edited by: user1022639 on Feb 7, 2012 5:24 PM

Text fields populated from lov mapping are not saved to database

Hi Everyone,
I'm having a wierd problem. My requirement is to autopopulate two text fields field 2 and field 3 when a value is selected from lov in field1 and save all the values to database on click of a submit button.
Using lov mapping i'm able to populate field 2 and field 3 with corresponding values based on the value selected in field1. And also field2 and field3 should be in the readonly mode so that user cannot change the value.
So to make the fields readonly i have changed the property of readonly to true for field2 and field3. But if I change the readonly property, the values for field2 and field3 are not being saved to database.
The values are getting saved to database only when readonly = true for messageTextInput item type or if the item type is a form value.
I also tried disable = true, which also didnt work.
I tried to debug by writing some sop statements in PFR, but these statements also returned null for pageContext.getParameter("field2") etc;
Can anyone please tell me how to solve this problem?
Thanks
Sunny

Hi Gyan,
I forgot to mention that , I also tried messageStyledText. Which also didn't work. I wanted to use vo.setAttribute as my last option, but i wanted to understand why the values are not saved to database when the text item is showing the values on the page.
Thanks
Sunny

Fund center reports Assigned values are not matching with ledger balances.

Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
Now we are taking reports the assigned values are not matching with gl ledger balances.
1. We need to update records for April- May.
2. Records in between deactivated and activate time.
Please suggest updating fund centers and commitments.
Regards

hi ELI
i have checked the follwoing secnarios
1. funds management deactivated.
2. one document posted with amount10000
3. funds management activated.
4. we have executed FMN0
here no document is selected after execution.
Please suggest what are the activities we need to do if i am wrong...
Regards

Created a trigger but new values are not inserting in the backup table

I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
create or replace trigger "SUPPQUOTES_AUDIT"
after update or delete on phsuppquotes for each row
begin
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
(:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
end;

old values and new
values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
insert into
phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
if (updating) then
insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
end if;
gojko adzic
http://gojko.net

Form values are not submitting to ActionForm class

Hi All,
I have a problem with <html:form> tag. When i am submitting the form using the submit button it is going to the Struts-config.xml file and getting the action mapping for the HazSummary.do. It is getting the HazardSummaryAction class and getting the input from HazardSummary Form class. If result is sucees it is going to the next jsp page.
All above things are happening properly. But the form values are not getting in to the HazardSummaryForm.jav.
Here in this case Action class is HazardSummaryAction.java, Action Form class is HazardSummaryForm.java and jsp page is Hazard.jsp.
Here is the code for Hazard.jsp
<html:form action="/HazSummary.do">
<table width="100%" border="0" style="border-collapse: collapse" bordercolor="#111111" cellpadding="0" cellspacing="0">
     <tr colspan="4"><td>
     <%String jd="jmd";
     String st="closed";%>
     <input type="text" name="wkploc" value=<%=jd%>>
     <input type="text" name="hastat" value=<%=st%>>
<html:submit property="action">
<bean:message key="haz.save.label"/>
</html:submit>
     </td></tr>
</table>
</html:form></body>
Here is the code for HazardSummaryAction.java
package com.prospecta.WSOProject.action;
import java.io.IOException;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public class HazSummaryAction extends Action{
     public String hazstatus;
     public String workplace;
     public String prin1;
     public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException
          HazardSummaryForm hsf = new HazardSummaryForm();
          HttpSession session = request.getSession(true);
     try{
     hazstatus=hsf.gethastat();
     System.out.println(hazstatus);
     workplace=hsf.getwkploc();
     System.out.println(workplace);
     session.setAttribute("stat",hazstatus);
     session.setAttribute("loc",workplace);
     return mapping.findForward("success");
     catch(NullPointerException nex){
          return mapping.findForward("failure");
          }catch(Exception e)
     e.printStackTrace();
     return mapping.findForward("failure");
Here is the code for HazardSummaryForm.java
package com.prospecta.WSOProject.action;
import org.apache.struts.action.ActionForm;
public class HazardSummaryForm extends ActionForm {
     public String wkploc;
     public String hastat;
     public void setwkploc(String wkploc)
          this.wkploc=wkploc;
     public String getwkploc()
          return this.wkploc;
     public void sethastat(String hastat)
          this.hastat=hastat;
     public String gethastat()
          return this.hastat;
Here is the code for Struts-config.xml file
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
     <form-beans>
<form-bean name="HazSumForm"     type="com.prospecta.WSOProject.action.HazardSummaryForm">
               <form-property name="wkploc" type="java.lang.String"/>
               <form-property name="hastat" type="java.lang.String"/>
     </form-bean>
     </form-beans>
<action-mappings>
<action path="/HazSummary" input="/HazSumForm" name="HazSumForm" scope="request" validate="false" type="com.prospecta.WSOProject.action.HazSummaryAction">
               <forward name="success" path="/HazardSummary.jsp"/>
               <forward name="failure" path="/Hazard.jsp"/>
          </action>
     </action-mappings>
     <controller processorClass="fr.improve.struts.taglib.layout.workflow.LayoutRequestProcessor" locale="true"/>
     <message-resources parameter="com.prospecta.WSOProject.ApplicationResources"/>
     <plug-in className="org.apache.struts.tiles.TilesPlugin">
          <set-property property="definitions-config" value="/WEB-INF/tileDefinitions.xml"/>
     <set-property property="moduleAware" value="true"/>
     <set-property property="definitions-parser-validate" value="false"/>
     </plug-in>
     <plug-in className="org.apache.struts.validator.ValidatorPlugIn">
     <set-property property="pathnames" value="/WEB-INF/validator/validator-rules.xml,/WEB-INF/validator/validations.xml"/>
     </plug-in>
</struts-config>
i followed the same process for previous pages which they are working. But in this case it was not working properly.
Please resolve this problem ....................

Hi Sreelatha,
When you develop any interactive form please keep in mind the below things which you need to check:
1. The layout type of the form should be ZCI. Select it from the form properties tab in SFP t-code.
2. In web dynpro application (in case you are using for the form), the form type should be selected as native.
3. In the form layout insert web dynpro script using menu->utilities->insert web dynpro script.
4. After that come out of the form and run the report FP_ZCI_UPDATE giving your form name, also select the update check box in the report.
Once these things are done your form should work fine.
Regards,
Vaibhav

LOV Values Are Not Preserved After Redirect

Similar Messages

Maybe you are looking for