Lower Half of Landscape Screen Unresponsive to Touch

Ahoy!
I'm writing a Landscape Orientation only app that doesn't display a status bar. I started by using the Utility Application template in XCode.
I've edited my info.plist and added the following entries...
{quote}
<key>UIStatusBarHidden</key>
<true/>
<key>UIInterfaceOrientation</key>
<string>UIInterfaceOrientationLandscapeRight</string>
{quote}
I've gone through and set Status Bar to none for FlipsideView.xib, MainView.xib and the Root View Controller in MainWindow.xib
I've set the following code in RootViewController.m, MainViewController.m and FlipsideViewController.m..
{quote}
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation {
// Return YES for supported orientations
if (interfaceOrientation == UIInterfaceOrientationLandscapeLeft) return YES;
if (interfaceOrientation == UIInterfaceOrientationLandscapeRight) return YES;
return NO;
{quote}
And I've modified AppDelegate.m to change the orientation...
{quote}
- (void)applicationDidFinishLaunching:(UIApplication *)application {
// Override point for customization after app launch
\[\[rootViewController view\] setHidden:YES\];
\[window addSubview:\[rootViewController view\]\];
\[application setStatusBarOrientation:UIInterfaceOrientationLandscapeRight animated:NO\];
\[\[UIDevice currentDevice\] setOrientation:UIInterfaceOrientationLandscapeRight\];
\[window makeKeyAndVisible\];
// Delay to allow views to rotate to ensure a smooth transition
NSTimer *timer;
timer = \[NSTimer scheduledTimerWithTimeInterval:0.35
target:self
selector:@selector(showView)
userInfo:nil
repeats:NO\];
- (void)showView {
\[\[rootViewController view\] setHidden:NO\];
{quote}
Everything is working great. The views change nicely and will orientate in either direction.
My problem is that when I started laying out my User Interface, I discovered that MainView was somehow preventing me from clicking any buttons on the bottom half of the screen. I could place and click buttons above 160 px. I could click just the portion of the buttons above 160 px. But any button, or part of button, that exists below 160 px will not allow me to click it.
I've tried disabling/enabling the button.
I've tried hiding/unhiding the button.
I've tried moving the buttons up programatically, clicking them, moving them down programatically. No luck.
I'm beating my head against the wall.
It's like the bottom half of the screen is not available for touch events.
The Flipside View works perfect.
If I start with the Flipside view instead of MainView, FlipsideView will have the same problem and MainView works perfect.
I can put other controls in the lower half, like a label, and manipulate them without a problem.
I know the MainView starts off portrait and then flips to landscape. That's why I hid it in the Delegate Class. Since MainView is the default view that is loaded, and the problem transitions to FlipsideView if I switch that, I believe the problem must be in the initialization of the default view.
For the life of me I can't find it though.
Any help would be greatly appreciated!
Bill

I have made a test project that illustrates this problem.
The link to download it is...
http://www.box.net/shared/dysb76lqtj
I set the RootViewController view to green, MainViewController view to purple and FlipsideViewController to maroon. I made just the changes I outlined above.
I then added a High and Low button to MainViewController and FlipsideViewController.
As you can see, when the MainViewController view is loaded, the background stops halfway down the screen but the buttons remain correctly placed.
Any ideas would be greatly welcomed!
Thanks!

Similar Messages

  • Lower half of my screen is green!

    Okay, now I'm frustrated. I've got my project all lined up and I click FILE -> BUILD. (My intent is to burn a VIDEO_TS folder in Toast, because DVD SP won't burn for me, but that's another discussion). Simulating my disc seems fine.
    However, when I burn the folder, and test it in Apple's DVD player, the lower 40% of my screen is green. All the buttons that lie in this space work, I just can't see them or that part of the movie when it is playing.
    Any help would be appreciated.

    For the burning problem I'd recommend using Toast over DVD SP at all times. You can control the burn speed and decrease the room for errors. Toast has a great feature for TS folders and gives great results.
    For the green, I'm not too sure. It sounds like a color compression issue. What colors are artwork is in the "Green" section? Is it a video? Photo? Text? Just white? Also, if you have toast try burning a copy and seeing what it looks like on a TV.

  • Thinkpad Yoga - touch screen on left half of the screen unresponsive

    Hi guys!
    On my new TPY the touch screen on the left hand side (the side where the charger is connected) is unresponsive. The pen however works perfectly fine. I have already run the lenovo software update tool and updated/installed all the drivers so I wonder what might be the culprit here...?
    Best,
    Chris

    if the left hand screen touch is unresponsive, then it is a hardware problem. You would need to send in for service.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Right margin (1/2") of iPod screen unresponsive to touch-Fix?

    the right margin (about 1/2" inch) of my iPod 4th gen doesn't respond to touch. Anyone know why - anyone suggest a fix? Already tried a "restore" - it didn't work. However, for a brief while yesterday it was responsive. Now it's not again.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Media Encoder in settings mode only shows the lower half of screen

    All of a sudden, my Adobe Media Encoder CS4 is only showing the lower half of the screen in Settings mode. This is how it encodes from the .wmv file to .avi. and is therefore corrupting the file. Does anyone know why this has happened?

    This is a known issue related to a recent security update to Windows Media: http://support.microsoft.com/kb/2803821

  • [Safari Lower Bar Appearing Mid Screen Bug]

    When entering an 'upload' box to upload an image, the safari bar (back, next etc) appears mid screen and you can't use the lower half of the screen until refreshing

    I'm not sure the exact name, either. The missing bar is usually has at the top of the screen with options: File, Edit, View, Tools, Windows, etc.  It appears for other programs. Here is a screen shot of I have:

  • IMac 27 3,1 Ghz (2011)  |  yellow tint on lower part of the screen

    Hello,
    Just bought an iMac 27" 3,1 Ghz with AMD Radeon HD 6970M 1GB VRAM.
    Unfortunately the lower third/quarter of the screen has a yellow tint. Very annoying if you want to do graphics and webdesign :-(((
    Is this still the same LED problem like in 2009/10 ? Anyone else with the same issue and a new 2011 model ?
    Very annoying and frustrating with an almost perfect machine. Temperature is very low, almost no noises – it would be a dream working place... Sorry, to say something negative about it, but the screen looks like it was used for ages and reminds me to the good old tube-days.
    Any experiences and opinions are very much appreciated.

    Same issue here too. I actually don't think most people would notice, but some of us have low tolerances for colour inconsistency. Anyhow, I've scheduled a return with Apple online. I think it may just be a characteristic of the display rather than something "wrong" with it. (?) So I'm not taking a chance on another computer, I don't think it would turn out any better. But yes, the lower half of my screen — and especially the center of the bottom — is clearly yellower than the top half. The problem is minimized if I turn the brightness way up, but then my eyes bleed, ha. When I keep the brightness set 6 ticks above "zero", I'm regularly distracted by the colour change. I can't notice it as much on a busy screen (versus a grey background) but that's not exactly a solution.

  • Help...lower half of touch screen not responding on 3g! this is a reconditioned one sent to me from apple as my last one was sso this one i have had for about a month

    ...can you tell im new to this!!
    Well as i was saying...
    I have had this reconditioned 3gs for about a month and it has been working spot on until this evening, I received a text and went to slide the screen to answer and it is not responding.
    I have shut it down, the top half of screen slides!!
    I have restarted it, using top button and home button.
    I have updated and restored it.
    And I have cleaned it!!
    Now i am out of ideas....can anyone help or do i have to give up and send back to apple...again?
    If it is the latter, do you think it will cost me again or does a recon from them come with a warranty??
    thank you for reading
    nic x

    If it was a refurb replacing one that was under warranty, the warrany is good until the original warranty expires or 90 days from replacement, whichever is longer. In either event, it should still be covered if you've only had it for a month. (assuming you're in the US here). You can try to restore it as a NEW device rather than restoring from your backup, but this sounds like a hardware failure... I think. I'm not sure what you mean by "the top half of the screen slides". If you mean only the top half is touch sensitive, how can you determine that? You wouldn't be able to slide to unlock if that were the case...
    Sorry, I'm a little confused by that description.

  • Touch Screen Messed Up On Lower Half

    Apparently the lower half of my phone is messed up, i can't click on anything but the upper half works fine, not to mention I got a new one after I cracked the screen on it. I believe it was a refurb but im not sure. When I turn it off i can unlock it on the lower half, but after i unlock it nothing on the bottom half works, and if i lock the phone after unlocking it i have to restart the phone in order to get back to my springboard.

    hey, i just wanted to know if u got a new refurb or ur old fone back..cuz i have the same problem...

  • I have an iPhone 6 with IOS 8.1.3 and when I use the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can have the whole screen to what I am browsing?

    I have an iPhone 6 with IOS 8.1.3. When I go to the landscape view in Safari, the bookmark page appears and takes up one half of the screen. How can I get rid of the bookmark page so I can use the whole screen to what I am browsing?

    OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.

  • Screen is unresponsive to touch !!

    Screen is unresponsive to touch !! Cant do anything. Irestored... It shuts down and starts fine, but when I try to unlock the slider it dose not move at... every thing is working but it cant reconize my fingers moving on the screen.. so I cant even unlock please let me know if you have any ideas

    Contact Apple. Your screen digitizer need to be replaced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • I very need help and fast my ipod touch 4 is dented on the top left corner and the screen is not in the silver part and because of that i think...when i open my ipod half of the screen is light white

    hi i very need help my ipod touch 4th was already damages (the glass screen wasnt in the silver part) and yestarday i was cleanin my room while listeng to music and my ipod fell 2 times after about 30 min half of the screen was light white first i thought it was a virus so i fully shut down my ipod and i also restored it but it didnt work so looked closly and saw that the left corner on my ipod was badly dented inward after i thought for a bit i thought that the spary i was using to clean my room could have gone in my ipod because the glass screen wasnt in the silver prt but i dunno if this prob cant be fixed at home by me does someone know how much it will charge 2 get it fixed and where i can get it fixed THANKS it wuld be a great help plz reply as soon as possible xoxoxox

    This has happened to me but i don't know what to do because my Itunes kept closing down and it shut down half way through updating and it just comes up with a silver apple and it won't turn off and now it's just frozen and it also doesn't recognise it when i opened up itunes again after i reset it to the factory settings

  • 5S screen is occasionally unresponsive to touch, and interaction is sluggish. All since updating to iOS 8.

    Ever since I updated to iOS 8, and all subsequent updates (currently running iOS 8.1.1) my iPhone 5S is considerably slower. Apps hesitate when I switch between them and sometimes crash entirely. Sometimes my screen is entirely unresponsive to touch and I have to tap numerous times before it works. I have restarted, i've done resets, I've backed up to the cloud, erased phone and restored from back up. The problems still persist.
    Any help would be greatly appreciated.

    FYI. I've chatted with Apple support online. They suggested I backup and restore using iTunes, which I've done already. SO to humor the tech, I did it again. If it doesn't work this time, then I need to bring it into an Apple store to be diagnosed and possible repair/replacement.
    Hope this helps any readers with a similar problem

  • HP 8620 Touch Screen Unresponsive - Firmware Software Bug?

    Hello, I have the latest "firmware update" on the HP 8620. Can someone please confirm this bug? I don't know if it is just for the HP 8620 or if it applies to all HP touchscreens. Basically if you go into any setting option, then hit the "home" icon and right after you swipe either left or right, it ends up rendering your touch screen unresponsive to swiping left or right. Is this bug already a known issue? The only way to correct the touchscreen so it is responsive again is hit the question mark, or an icon on the bottom and hit the home button (without swiping left/right right after the home button).

    Hi , Welcome to the HP Support Forums! I see that you're experiencing issues with your touchscreen on your HP Officejet Pro 8620 e-All-in-One Printer. I will certainly do my best to help you. Please confirm you have the latest Firmware Version: FDP1CN1502AR. If you do not, please go to HP's download page by clicking here. As far as I know, this is not a known issue with the printer or with the printer's Firmware Update. This could be a glitch in the touchscreen, which a Reset should resolve. Let's start by performing a Hard Reset.Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.Then reconnect the power cable to the printer and wall outlet rather than a surge protector.This ensures the printer is receiving full power and may help this situation.Make sure the printer is connected directly to a wall outlet. (don't use a power bar or a surge protector) This ensures the printer is receiving full power and may help this situation.If you're still experiencing issues, we may need to perform a Semi-Full Reset. I can send you that information in a private message. In the forum beside your handle name just click on the envelope to view it. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

  • Section Of Touch Screen Unresponsive

    Hello, I bought an Ipod touch 8GB and when lately I have noticed that there is about a 5 cm section that goes across the middle of the screen that is unresponsive to touch.
    This is really a problem because there are a lot of important buttons in that unresponsive section of the screen such as the G and V buttons on the keyboard when I have the Ipod sideways and the play and pause button doesn't work for youtube and when I watch videos. My question is has anyone else had this issue and is there a solution? I'd really rather not buy a new one, but I'm willing to erase all data just to fix this issue. Thanks.
    Message was edited by: B-Ry
    Message was edited by: B-Ry

    I read a while back were the iPhone had sensitivity issues with there displays, in the first generation of iPhones, and that all of the affected iPhones had to be recalled and replaced.
    You should contact your local Apple store or call Apple support and get the iPT replaced, this is not how it should respond. The entire surface should be sensitive to touch. Mine is and it is an 8GB iPT.

Maybe you are looking for

  • Help! Is non working DVD a replaceable decoder chip problem?

    Can anyone tell me why, My 400Mhz G3 Pismo Powerbook from the M7572 series shows no DVD decoder chip hardware in the profiler, even though it shows the drive and says that it has a video DVD on the bottomside of the case? When I install a DVD disc in

  • Can I cancel Itunes Match Subscription?

    Hello, While living in the UK during my 2 year visa, I downloaded Itunes Match.  I have now returned home to Canada.  I need now to change my billing information and my country/region in order to download any new music or apps.  In the Itunes Store u

  • MacBook Pro 17" freezes for a few seconds (Errorlog included)

    Hi, sometimes my MacBook Pro freezes for a while. 10 seconds or a minute. Everytime it happens, there is the following error: 16.02.10 06:07:03 kernel SMS::infiniteIntTimerEventHandler ERROR: we have infinite interrupts, disabling It happens not very

  • Message no M7093

    Hello Experts, While user is posting the goods delivery. He was getting error "Field selection for movement type 981/account 1830200817(stock transfer account) differs for customer goods movement (015)" -Message no M7093. Thanks and Regards Urmila Sh

  • How can I install itunes?

    Error getting file security. C:\ProgramData\Apple\Installer cache\Apple Software Update 2.1.2.120\GetLastError 5 Tried about four times to install iTunes and the install stops and gives the above error message. I just got an iPhone and I guess it req