LP 10.0.7: issues yet?

I'm working for a long time with LP 9.1.8 flawlessly. Even now with my new Mac Pro and Mavericks 10.9.5 all work fine.
Now I'm thinking to take the new X, but I'm quite hesitant yet, because I read about some issues with it. And above all I'd like to know if I can import LP 9.1.8 songs in X without issues; I know that you can launch independently 9 and X, but when I begin to work with a new GUI and get used with it I reluctantly go back to the old one. Even with old songs I'd prefer to import them and work with the new GUI.
So, I'd be grateful if someone could tell me if now, with 10.0.7 there are some issue yet....

It depends what you mean by "without issue"
Example: If you have used 32bit AU plugins in your LP9 project then it will not work correctly in LPX because LPX does not suport 32bit AU plugins.. only 64bit AU plugins... In which case you need to use something like 32 Lives to convert these older plugins to 64bit versions ....
http://www.soundradix.com/products/32-lives
Additional:
A small number of older LP9 projects can very occasionally import with incorrect Transpose/Velocity settings in the Track/Region Inspector but these are easily fixed and the occurrence of this happening is seemingly rare these days...
Other than that, I have been able to import my very large collection of LP9 projects into LPX without any issues of note.. (more as a test of the robustness of the import system and in preparation for the day that LP9 won't work with the latest OS X versions which is bound to happen at some point in the future I believe) rather than anything else...) and have been able to do so for some time now.
Opinion: Personally, for the time being at least...  I tend to stick to using LP9 with LP9 projects and I create new projects in LPX. The differences in the GUI really don't seem to bother me.....

Similar Messages

  • I am getting entries which are 'all day' entries duplicated 8 to 9 times. I have updated my software on the phone to the latest version. Entries in iCal are only once.  I have completely emptied my iPhone of all data. Has Apple resolved the issue yet?

    I am getting entries which are 'all day' entries duplicated 8 to 9 times. I have updated my software on the phone to the latest version. Entries in iCal are only once.  I have completely emptied my iPhone of all data. Has Apple resolved the issue yet?

    Simple solution. Get a real internet service and not a cell phone internet connection service it was never meant to be used as the primary internet service
    And how do you lose a home and job and be sued as you claim. What over 10 Gb of data? Give me a break
    In my city small claims is $5000.00
    And over that amount you can go to a superior court to have your issue settled.
    http://www.bbb.org
    Good Luck, Elector

  • Total Gate in stock but not issued yet

    Hi all,
    I am working on a report to show the material come into company with movement 103 during certain duration ,
    and within that duration detail of  stock not issued . (i.e.  Total stock in store but not issued yet )
    I am using Mkpf and mseg data with 103 .
    How to do second part .Total stock not issued from gate in stock.
    Thanks

    Hi,
          Can you make your question more clear, it is not clear what is you requirement exactly.
    '.Total stock not issued from gate in stock.' : Yuou mean to say GR made with 103 but 105 not done for that
    or  Total stock in store but not issued yet )  : there is no GI with any movemen type ??
    regards,
    zafar

  • Is there a fix for the iPad2/iOS7 WiFi dropping issue yet?

    After searching through Many threads regarding iPad2 Wi-Fi issues, I have found a lot of different "solutions" and I've tried them ALL but my Wi-Fi is STILL dropping out on me all the time. My iPad is running iOS version 7.1.2. I am constantly getting errors like
    "We were unable to connect to the servers. Please try again later."
    or
    "Internet Connection Lost",
    or i try to download an app and it just spins for a minute then acts as though nothing happened and the app never installs. I literally can't use any of my apps and the only way to reliably download them onto my iPad is to push it over from itunes with the ipad plugged in via usb after downloading it on my computer.
    I have tried:
    1-Checking connection settings (airplane mode Off, wifi connected to correct secure home network, bluetooth Off, mobile data Off)
    2-rebooting ipad
    3-making sure there's nothing running in the background by double-tapping the home button
    4-removing an apostrophe from the ipad name.
    5-putting the ipad into Airplane mode and then going to Settings > General > Reset > Reset Network Settings
    6-going to Settings > Control Center and disable Access on Lock Screen then turning ipad off and on again.
    7-updating router firmware
    8-doing a factory reset, then repeating steps 1 through 6
    Any other ideas?? I really need to make this work! Any help will greatly appreciated.

    8-doing a factory reset, then repeating steps 1 through 6
    Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

  • Has anyone solved the Apple ID issue yet?

    My 4 year old iTunes ID, a Yahoo email, was disabled as I could not verify it. I could not verify it as I never received the verification email. I get the same problem when I try to reset. iForgot tells me the ID does not exist but when I try to set it up as a new ID I am told it is already in use. I have already removed the email from my .mac Apple ID. Apple support are not responding. Can anyone help? I have a lot of content tied to the Yahoo ID so I can not abandon it.

    Tweety72 wrote:
    We continue to have garbled printing problems, on two different HP printers, yet it doesn't seem anyone at HP cares to find the cause of the problem.  I've told them that I'll be donating the HP printers and buying something else.  Any suggestions?
    Yes, please read this post and then provide some details.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Has anyone solved the garbled printing issue yet?

    We continue to have garbled printing problems, on two different HP printers, yet it doesn't seem anyone at HP cares to find the cause of the problem.  I've told them that I'll be donating the HP printers and buying something else.  Any suggestions?

    Tweety72 wrote:
    We continue to have garbled printing problems, on two different HP printers, yet it doesn't seem anyone at HP cares to find the cause of the problem.  I've told them that I'll be donating the HP printers and buying something else.  Any suggestions?
    Yes, please read this post and then provide some details.
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Anyone experienced dust issues yet on the newest 27'' 2013 Imac (display) ?

    Hello,
    I just ordered the newest Imac 27'' from the store and was very happy and excited at first but it slowly faded as i read on about the display issues which seemed quite common on the previous imacs  (dust inside the imac, panel removal etc.) and now i'm torn between sending it straight back or keeping it.
    I bought this imac with the intention to last at least 4-5 years but after reading through all the messages i'm not sure about the quality of this apple product anymore - sadly.
    I also have to say that i am still an university student who can't afford switching panels all the time (no apple care) when i know it only helps out temporarly and the main problem probably lies somewhere deep inside the imac.
    So any information or experience regarding the dust development within new imacs would be helpful thank you !

    after reading through all the messages i'm not sure about the quality of this apple product anymore - sadly.
    You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.  Think of this place as an emergency room/hospital for comps.  If you want to a review of your model iMac, do a Google search for news articles rather than a "technical support" message board.  Read all the reviews you find. 
    Since you are a student, you are entitled for a student discount on AC.  You were also entitled to one on your new iMac too.  Did you get it? 

  • "safari won't let me add attachments in outlook", has anyone resolved this issue yet?

    I used to be able to add attachments to my emails in outlook but suddenly this year it's as if the paperclip icon has become inactive. I've tried copying and pasting and clicking and dragging, which were some of the alternative ways of doing the same thing, but it still didn't work.I don't use google chrome or fire fox at this stage but may have to consider doing so. Before I do that though, I was hoping maybe someone had resolved the issue. I read that others had similar problems. Any ideas?

    Ok..
    They also had me add a keychain access.
    Try this one more time ...
    Open Keychain Access  /Applications/Utilities
    Select Passwords on the left.
    Locate then deltete the Ancestry.com keychain
    Now type this in the search field:   Safari Forms Autofill
    Delete that keychain as well.
    From the Keychain Access menu bar (top of your screen), click Keychain Access > Keychain First Aid.
    Click Verify. If necesssary, click Repair.
    Quit then relaunch Safari. Check Safari > Preferences > Autofill. Make sure User names and passwords is selected.
    Navigate to the Ancestry site. Click yes when prompted after entering the user name and password. That will create a new kecyhain for you.
    If you still have problems, I had the same problem staying logged into that site on Safari as well so I use Firefox. You may want to give that a try as an alternative. Good to have a backup browser installed regardless.
    Mozilla Firefox Web Browser — Free Download
    edited by:  cs

  • Has HP fixed its motherboard/HD issues yet?

    It seems like I wasn't the only person who got the BIOHD-8 message on my computer as there seemed to be some serious problems with HP computers. Indeed, this is the second time my HP computer had died on me. After the first time, I would have thought HP would have fixed not just the computer but the underlying problem that caused all these problems. But, it seems like while HP replaced the computer, they just put in another faulty disk drive or motherboard.  
    If I bought anothe HP computer, would I still run into this problem or has HP fixed the underlying issues since then? Or, is an issue with all computers where you should expect a computer to only last a few years?

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the side, back, or bottom of your computer. Please do not include your serial number.
    I was unaware that HP had a motherboard or hard drive issue to fix. I have/had over a dozen different HP computers and only one has had a hard drive issue... and it wasn't a "BIOHD-8" error. None of my HP computers has had any type of motherboard issues. When a hard fails or begins to fail, you may receive a number of different error codes or messages. Typically these errors mean the hard drive is going bad but on rare occassions it could indicate a motherboard failure. The computer itself, should last many years... hard drives, however, may only last 6 months to a couple of years.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Has anyone come up with a solution for the WD Passport and Mavericks OSX issues yet?

    I was wondering if anyone has come up with a solution for the newer Macbook Pro/Mavericks and external WD Passport not mounting problems?
    I have a couple of year old WD Passport that worked fine in my old 2009 Macbook Pro, the problem is the old computer crashed.
    My dilemna; My new 2014 Mackbook Pro will not open my WD Passport, called WD Support, their answer, sorry, nothing has been solved.
    Is there anyway I can get access to my files on the Passport with any other software, or by using a PC.
    I am aware of reformatting the HD, and have read all the forums I could find and have tried installing the WD Update as well, (with the support tech from WD) and nothing works.
    I know that my WD Passport works, so please don't suggest checking it, or the cord.
    I appreciate all the help anyone can offer, and I am with all the rest of you struggling for solutions.
    Thanks so much

    Hi everyone, this is what I did
    1. upgrade disks to the latest firmware
    2. de-install ntfs-3g and MacFuse.
    3. Re-install NTFS 3G  without Macfuse.
    4. Next step: Install OSXFUSE latest version with selection MacFUSE compatibility layer.
    5. Last step: Install Fuse Wait
    Note: between steps 2 and 5, I restarted my machine.
    It worked for me, after about 4 hours.

  • Is there a fix for the "secure download" issue yet??

    Hello everybody
    I recently talked a colleague into switching from PC. He bought a Macbook and everything has been fine, until recently all his email downloads appear as "secure download". I looked in the forum, noticed some folks appear to have the same problem, but could not find a fix. Can anyone provide some solution???
    Thanks

    Hello everybody
    I recently talked a colleague into switching from PC. He bought a Macbook and everything has been fine, until recently all his email downloads appear as "secure download". I looked in the forum, noticed some folks appear to have the same problem, but could not find a fix. Can anyone provide some solution???
    Thanks

  • And how about the affected computers that don't show issue yet?

    if it fails 3 years and 1 day after purchase, I'm out of luck.  Is apple replacing ALL cards, even if unaffected so far?

    if it fails 3 years and 1 day after purchase, I'm out of luck.  Is apple replacing ALL cards, even if unaffected so far?

  • 2.0 Issue that I haven't read about yet

    This is the lenghty email I just sent Apple:
    I like many others have been experiencing issues with the new 2.0 update for my ipod touch. the first issue is that my battery life has dropped signifigantly. if i use the touch for an hour it will be half way down, just reading articles, not using wifi at all. the other issue is that when i try to sync apps from itunes, some will fail but then when it is resynced they load fine. (i have a design issue with everytime you update apps the reorder them on your screen) the wifi is screwy, it will say "server not found" then when safari is rebooted it is fine. also it will randomly restart.
    Now all of these issues are HEAVILY DOCUMENTED on your support forums, one however I can't seem to find anything on, and i hope it is also just a flaw with 2.0 that will be resolved very soon....anyway, i like to charge my touch while it is off. in the past i would turn it off, plug it in and see the battery pop up on the screen. now with 2.0 when it is off and i plug it in (at the wall or pc) it will turn itself on. when i try to manually turn it off, i get zero indication of it still being charged. it is just a black screen.
    The point is which i hope you are well aware of by now is that hundreds of thousands of LOYAL apple fans that have apple tatoos and put apple stickers over the kenmore badge of their fridge and name all 3 of their kids Steve Jobs all because apple is known to be very realible and friendly for anything they touch (no pun intended) spent several hundred dollars on their equipment and money to update their touch to 2.0 all to not only have issues with the software, but even larger issues with support.
    I, being an executive for a fortune 500 company am the first to understand keeping issues as quite as possible, and i further understand software glitches with any large update. HOWEVER, i do see a big problem when A) apple has done nothing to address this issue, even on their owned and opperated forums and B)have all of you employees treating this issue as if it doesn't exsist and that it is the users fault. the worst part is when the company knows of the issue and all of the employees deny it. i recall when microsoft had xbox360 issues they did everything they could to fix them and lost millions in the process, meanwhile apple wants a customer on you very own forum to pay $30 to mail his or her touch in to you.
    This is just not what myself or anyone else expected from a company held in such high regard. please, address the problem, let your employees (especially the ones in the stores) know that this is an issue, and get a fixout immediatley.
    thank you for reading,
    regards,
    Mike
    so like the topic title states, i am having most of the issues that others are having (not as bad though) however i went to charge my touch tonight (because after an hour it was half dead). so i turned it off and when i plugged it in, it turned itself on! when i turn it back off while leaving it plugged in the batter picture that used to show up on the screen is not there, so i have no way of knowing if it is taking a charge.
    i haven't read about this issue yet and it worries me. it always used to show the battery meter on the screen when it was off and plugged in (and it never would turn on when plugged in)
    someone test and help, please.
    Message was edited by: knightriders3

    I use a Macbook with Windows XP in Bootcamp & Outlook. Since I upgraded Itunes and Ipod, my calendar and contacts will NOT sync. I have tried everything many times.
    My daughter uses a Macbook with Leopard and since she upgraded Itunes and Ipod, all of her music purchased from Itunes won't play. You can see it, you just can't play it. Her other music works fine.
    I am a software programmer. This is definitely a major software issue.
    I understand that it takes time to find and repair these software issues, BUT
    Apple needs to at least let us know that they are working on it.
    I'm sorry, without contacts and calendar functions that work, what is the point of trying to sell Mobile Me. From the threads, it sounds like it doesn't work either. What a sad joke.
    Apple - get your act together.

  • Issues with multiple things since Mavericks update

    I installed the Mavericks update and since, I have been having multiple problems with different things on my MacBook Pro 13"
    1. Printer issues: I have an HP officejet 6500 wireless printer (Officejet 6500 E709n Series), and now it's having major issues with printing, yet was working perfect prior to update. It will either cut out pages when printing PDF documents, or printing so slow that it has to take a break in between printing each document (an issue that all never occurred until update), to print documents back to back, it will stop after one document as though I have no other documents in queue to print, and pauses for an extremely long time (nearly a full minute, no exaggeration here, literally almost a full 60 seconds), something it's never done before this update. My Apps update even did an update to the HP software that is inside the Mac already to use printing (in other words, the mac doesn't need to have the HP software manually installed for it to work, it automatically sees the printer because it is connected to my wireless network just as my Macbook Pro which is also connected wirelessly to my network).
    2. Internet issues: am now unable to click on certain links in safari that I was able to use prior to the update, yet they will open fine inside of firefox with no issues, yet I cannot always switch between two different browsers to perform task online (literally have to start all over inside firefox while in the middle of something in safari). Also lots of websites no longer work correctly and I have to constantly clear history and cookies to attempt to use certain sites, at times it will help, other times it wont work period, yet the same exact site will work perfect in firefox (which I do not use, only on my system for use on certain sites for school because in safari prior to the update, I would have issues with only the class site and some links not working at all, no spinning wheel, no errors, just nothing, no response of any kind, basically worse than what it was before the update). Another issue, hit Ctrl+a to select inside Safari and it highlights, but then when you click out of the highlight, it comes back on it's own several times without you hitting anything, just click inside the screen on a blank space (no links, etc) with touchpad.
    3. System issues:  My system is way slower than what it was prior to the update, click on things and it wont respond at all, then minutes later will eventually respond or pops up the spinning color wheel, which it either never responds or takes an extremely long time to respond. And no matter how much I restart, it doesn't help anything. Even just to sit doing nothing, no clicking or usage on the system, and the color wheel pops up.
    4. Mail issues: Mail is now popping up completely blank messages that I have sent out, the person receives it with no issues, yet I cannot look at the message I sent neither in the inbox or the sent items when I need to look at them again, an issue not present prior to update. Also I an now having issues when receiving mail, sometimes it will check for mail and sometimes I have to manually click to make it check the server for mail, an issue not present prior to update as well.
    As of now, since I have had the chance to used the system since the update, these are the issues I have had, yet haven't had the chance to check other things, so there may be other issues that are occurring that I'm not aware of at the moment. I knew it would be a mistake to do this "free" update and did so anyway and now having one issue after the next with each application I open to use.
    Mac general info:
    Mac is one year old, purchased brand new, no shareware programs of any kind installed.
    Use for school and basic web surfing use.
    Do not install any programs onto system that I'm unsure are safe (basically programs for/from school/school websites only, or from the Mac Apps store only), not even programs like Skype, nor any windows based programs of any kind.
    Lots of free memory avail because I save everything onto external hard drives (purchased brand new as well, only 4months old) in case system crash occurs, only things on the system is Itunes music or pics from photo stream that sync to the system when Iphone connected.
    Mac system info:
    - Processor  2.5 GHz Intel Core i5
    - Memory  4 GB 1600 MHz DDR3
    - Graphics  Intel HD Graphics 4000 1024 MB
    - Software  OS X 10.9
    - Number of Processors:          1
    - Total Number of Cores:          2
    - L2 Cache (per Core):          256 KB
    - L3 Cache:          3 MB

    For those needing help fixing their system and putting it back to Lion or Mountain Lion, this is what I have done to eliminate all my issues in about an hour (depending on your internet connection).
    Amazing thing, I just restored my computer back to Mountain Lion, and she's working perfect again, as I knew she would. E-mail popping into mailbox instantly as it should and did before the update, printer working fast as it was before update, no more freezing or glitches of any kind thankfully and finally. Here is the link that is through the Apple site to direct you on how to put your system back and get rid of Maverick's, that is assuming that is what you would like to do and also includes link for those wanting to try fixing the issue if that is your preference (most of this info is for those with mountain lion and some with the previousverisoin of OS X lion).
    If you want to keep Maverick's here is a good post on the apple discussion board to help you out:
    https://discussions.apple.com/docs/DOC-6161
    If you just want to totally get rid of it and put back what you had before, this is the short version of how to do so:
    https://discussions.apple.com/docs/DOC-3353
    NOTE: This particular link has a lot of info on what to do for different situations, it is a bit lengthy, yet still very helpful.
    OS X Mountain Lion: Reinstall OS X (direct from Apple support site, not someone else):
    http://support.apple.com/kb/PH10763?viewlocale=en_US
    OS X: About OS X Recovery (also from apple support directly and includes some instructions just the same as previous links above):
    http://support.apple.com/kb/HT4718
    Just in case you aren't sure what it will all look like as you are doing things, this is a link to show you a few pics of what you will see  as you as you are going through the process, it can be helpful for those who aren't sure what they are doing or how to do things at all:
    http://www.apple.com/osx/recovery/
    This is a way to download the Mountain Lion disk info from the server
    http://support.apple.com/kb/DL1433
    I hope this helps someone, it was amazing for me and my system is working perfect again like it was, battery life is way better went from like 3 hours to like 5 (not on full charge by the way, after it sat for a while doing the online update which took a while so that's saying something alone, huge improvement). I plan to wait a while before attempting to reinstall Maverick's, long enough for them to fix the bugs.

  • Is this a low memory issue, or something worse?

    I'm currently running Logic 9.1.6 on a new imac 27" with 16GB RAM. Just about all my libraries are running from a 4TB RAID system. It's not ideal for my purposes ( certainly compared to my "normal" studio setup), but I was delghted with just how much this computer can handle with that amount of memory onboard. However, there is a fly in the ointment, which I hope someone may explain.
    Generally, I'm running a very large orchestral/"filmscore" template. Most of this is being hosted by Kontakt, with a few other bits and pieces thrown in: softsynths, Omnispher, Stylus,etc. But chiefly, it's all orchestral. When currently fully loaded, the Konatakt memory server is showing around 5.5 GB RAM used, which is pretty fantastic considering how much orchestral stuff is loaded up. I'm also working, on average, with around three instances of Altiverb, with groups of Kontakt instruments sent to whatever reverb is appropriate. The output has a simple, single Waves L2 on it. But, and here's the BIG but, despite the fact that I'm well within the RAM limit of my 16 GB. Logic, combined with the OS, is totalling around 13.5 BG of RAM which seems excessive,correct me if I'm incorrect on that. Worse, sometimes Logic starts to behave very oddly, particularly in terms of its GUI. Sometimes, if I choose to load up a couple more instruments, and then begin scrolling around the GUI seems to "collapse" in on itself and tracks start to "merge and dissolve", like the OS is having serious trouble in redrawing the graphics of Logic. Sometimes, also if I launch a Kontakt instance in this condition, the slots appear empty. In fact, I've evn had them actually unload entire 16 slots of instruments from Kontakt, I presume in an effort for Logic or the sytem to conserve RAM, which I find puzzling.
    If left to continue, I usually end up with what I would describe as a damaged song. At that point even clicking on the mouse once send this brilliant white flash all over the screen, each time I click. Eventually, Logic will "collapse" and crash, and I know then that further attempts to relaunch this song will result in the same metling graphics and crashing, ultimately rendering the song unusable. In the past I've resorted to exporting all the data as a MIDI file and had to import to a fresh template, which has proved hit and miss.
    I'm assuming this is a memory related issue, yet I see that even with a fully loaded song such as this, I still have around 3.5 GB RAM spare. More than enough of a cushion to avoid such weird issues as I describe. Or no?!
    Can anyone throw some light on this, please? Is it a RAM/redraw/ graphics issue, due to pushing the memory limits, or something more sinister?
    Thanks.

    OK, I thought you might be interested to read these results. I switched to 64 and rebooted the computer. Now, with the exact same song, the memory used is appromately 9.5 GB, instead of 13.6 GB! an impressive difference.
    I haven't yet used this in anger, so I don't know what will happen regarding third parties. I did note, however, that upon launching Logic for the first time in 64 bit, the AU validation concerned itself with 30 potential problem plugins, as opposed to the full extent of them, which is considerably more. No bad results came back from the scan, although this doesn't mena I'll not experience issues.
    When you said the experience was not great for 32 bit plugins in 64 bit, what exactly did you mean? Crashes? Plugins simply not workng at all?
    Tomorrow I'll get to work like this and see what happens. I have to say I'm encouraged.
    Now if only I could switch to Lion and all my plugins were 64 bit..........

Maybe you are looking for