Total Gate in stock but not issued yet

Hi all,
I am working on a report to show the material come into company with movement 103 during certain duration ,
and within that duration detail of stock not issued . (i.e. Total stock in store but not issued yet )
I am using Mkpf and mseg data with 103 .
How to do second part .Total stock not issued from gate in stock.
Thanks

Hi,
Can you make your question more clear, it is not clear what is you requirement exactly.
'.Total stock not issued from gate in stock.' : Yuou mean to say GR made with 103 but 105 not done for that
or Total stock in store but not issued yet ) : there is no GI with any movemen type ??
regards,
zafar

Similar Messages

Purchased & downloaded PS Elements 13 but not installed yet as concerned if my hardware is adequate?

Purchased & downloaded PS Elements 13 but not installed yet as concerned if my hardware is adequate? Acer Aspire One AMD C-60 APU with Radeon HD graphics 1.0 Ghz/4GB RAM/500GB T45H3P135, Windows 7, 64-bit (BTW the WIN 64-bit used the Akamai down loader with a -32 in the suffix-could that cause any problem?) I would like to confirm if my machine is compatible (will it run but slowly?) before attempting final install? or what if I install & find it's not compatible? Thanks for helping this novice!

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

BBM Curv 9220 DOA requested & handover to dealer but not issuing Handset

BBM Curve 9220 DOA requested & letter of DOA handover to dealer but not issuing Handset, Let me know the procedure should follow & what is the time/days dealer has take to replace the Mobile..
This shows, BBM's poor service quality.. I am suffering from past one week & not receiving a satisfactory replies from service centers & dealers also
What should I do now... If not solve today I will definitely go to consumer forum against BBM & Anand's Mobile Arena

Hi and Welcome to the Community!
Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you. Since no one here works for your dealer nor BlackBerry, we cannot answer your questions because we have no standing in the matter.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why does my computer say that its plugged in but not charging yet the battery is not reducing

it says plugged in, not charging, 99% (battery life)
but the battery life is not reducing & hasnt for 2 days. it just stays like that.
hp pavillion dv5-2132dx laptop
windows 7 64 bit
i have had a few weird occurences and im not sure what caused it. abruptly my speakers would stop working & my battery life would start reducing. that happened i think 3 times over the course of several months. this last time which was the 3rd is when i changed electrical outlets thinking that maybe that was the problem. and the power & speakers immediately went back to normal. its only been a few days since i changed outlets & everything is working as it should be however as mentioned the battery icon on the taskbar says that its plugged in but not charging & it remains at 99% for the last 2 days.

Hi,
First of all, shut down the notebook, unplug the AC Adapter, remove the battery, and then hold down the Power button for 30 seconds.
Now, plug in the AC Adapter without the battery inserted, start the notebook, open windows Control Panel, open Device Manager, expand the entry for Batteries, right click on and the Microsoft ACPI Compliant Control Method Battery and select Uninstall - do not uninstall anything else here. When the uninstall is complete, shut the notebook down, unplug the AC Adapter, re-insert the battery and then start the notebook on just the battery. Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the notebook again. Now plug in the AC Adapter ( with the battery still inserted ) and start the notebook to see if this has helped the charging issue at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Canceled but not received yet

i canceled my item is apple airport express with Order Number: W277258486 in march 11 2011. i received email with notification about canceled items, but now, i've not received return yet!!! plz help me!!!

You have posted in a forum for users. Apple is not here and they will not respond to you on this forum.
You should contact Apple Customer Service directly to resolve your issue.
http://store.apple.com/us/help/contact?mco=MTM3NDc0OTU

IPad 2 WiFi Range Issues (but not issues with connectivity when in range)

Okay. I hate to start a new thread when there are bunches of threads on the iPad 2 having WiFi problems (particularly with 5Ghz networks and also related to 4.3). Nonetheless, I'm not seeing anyone talking about range in these forums.
Issue: iPad 2 WiFi range is not as far as iPad 1 (with no cover on either).
Alternative Explanation: iPad 2 has difficulty connecting to Airport Express or Time Capsule extended networks.
Devices: iPad 2 3g, iPad 1 3g (iOS 4.3), iPhone 3gs (iOS 4.3), iPhone (iOS 3.2x), iMac, MacBook Pros, etc.
Network Router: Simultaneous Dual-Band Airport Extreme (latest version) set up with 2.4, 5 ghz and Guest Networks (each with their own name).
Network Extender: Airport Express (latest version) extending the 2.4 ghz network
Network Extender 2: Time Capsule (original, single band) extending the 2.4 ghz network
Longer Description: iPad 2 connected without an issue to the 5 ghz network and the 2.4 ghz network when it was in the same room as the Aiport Extreme. Didn't have any issues maintaining that connection.
However, the iPad 2 doesn't work in any of the farther rooms and can't see the network. iPad 1 and iPhones have no issues (and typically show 1 or two bars). I believe they typically are connecting through the Airport Express (but it could be the Time Capsule).
Given that the iPad 2 isn't even seeing the networks, I'm guessing it's a range issue, but hoping it's not.
Anyone else seeing this? Any fixes?

While it is possible that an Apple moderator (Apple host) could pass some information to an Apple development/support group, in practice this doesn't really seem to happen (at least often). I believe that the moderators are kept quite busy just administering the forums and keeping them under control (no spam, ads, abuse, etc.). I've never seen a post by an Apple host here or seen a technical correction to a post (and there is certainly a lot of incorrect information posted here).
Unfortunately, a lot of new posters here seem to think that they are talking directly to Apple and post bug reports, feature suggestions, complaints, etc. These would be much better submitted via the Apple feedback vehicle at http://www.apple.com/feedback. These are not anonymous, are directed to the appropriate product and provide an email contact for Apple to get back to the submittor if more detail is required.

Why will only one site load but not display, yet links are available on the site? OS10.8.5, Safari 6.1.4

I am running OS 10.8.5 and Safari 6.1.4, When I go to sierratradingpost.com, the page appears to load, but the page is blank. When I pass the cursor over the page, it will change to the pointing finger indicating active links. Yet, when I click on the link the new page loads, but is also blank. This only happens on my Mac Air, it does not happen on my iTouch or iPad. I have looked through all my settings when the page is loaded but can find nothing. I have WOT, Ghostery and Ad bloc active. Even when I turn all those off I still have the same problem. Everything was fine yesterday morning, but when I went to the site in the afternoon, the problem arose. Any ideas?

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Report via Concurent Program Running Normal But not Finished Yet

Hi,
I have a custom report, running on eBusiness Suite 11.5.10.2 in module Purchasing.
When I running that rdf report in Oracle Report Builder it running OK and very quickly (just several seconds).
Then I deploy it on EBS concurrent program, when I submit new request with that report concurrent program it running normal but, its not completed since several ours ago and may bee more longer.
Did anyone get same problem with this? Any idea what should I do?
Here is the logs file when its still running
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POACCPO01 module: Printed Purchase Order - ACC
Current system time is 02-JUL-2010 18:07:15
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PO_NUMBER='12681'
P_PO_NUMTO='12681'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
-- Start of Reports Command --
ar60runb
P_CONC_REQUEST_ID=4162628
P_PO_NUMBER='12681'
P_PO_NUMTO='12681'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
report=/data1/u01/apps/prodappl/po/11.5.0/reports/US/POACCPO01.rdf
batch=yes
destype=file
desname=/data1/u01/apps/prodcomn/admin/out/TEST_hrd-tes/o4162628.out
desformat=PDF
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
Previous NLS_LANG Environment Variable was :
American_America.US7ASCII
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Thanks.

Hi,
And when I submit a new same request with same parameter, the previous request will getting error. Here is the log file:
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POACCPO01 module: Printed Purchase Order - ACC
Current system time is 05-JUL-2010 09:20:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PO_NUMBER='12682'
P_PO_NUMTO='12682'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
-- Start of Reports Command --
ar60runb
P_CONC_REQUEST_ID=4163558
P_PO_NUMBER='12682'
P_PO_NUMTO='12682'
P_HORMAT_KAMI_01='SRI HARTATI'
P_HORMAT_KAMI_02='RETNO SUNDARI'
P_ORG_ID='363'
report=/data1/u01/apps/prodappl/po/11.5.0/reports/US/POACCPO01.rdf
batch=yes
destype=file
desname=/data1/u01/apps/prodcomn/admin/out/TEST_hrd-tes/o4163558.out
desformat=XML
-- End of Reports Command --
Request language is :
AMERICAN
Request territory is :
AMERICA
XML_REPORTS_XENVIRONMENT is :
/data1/u01/apps/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /data1/u01/apps/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Previous NLS_LANG Environment Variable was :
American_America.US7ASCII
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 15450
X connection to hrd-tes:0.0 broken (explicit kill or server shutdown).
Report Builder: Release 6.0.8.28.0 - Production on Mon Jul 5 09:20:04 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Reset original NLS_LANG in environment as :
American_America.US7ASCII
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 4163558.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 05-JUL-2010 09:54:06
---------------------------------------------------------------------------

Iphone 6 ordered on 9/15 but not shipped yet

I ordered an iphone 6 16gb silver on 9/15 through a phone order with verizon my ship date has been 10/3 since I ordered. I was fine with waiting for my phone to ship but it is now the ship day and I have not seen any indication of shipment. I tracked my order and nothing has changed since I ordered. I've also called verizon several times and no one ca give me any answer why it hasn't shipped. I was charged for the phone (2 yr upgrade) on the day I ordered, so a little over $200. I am a little frustrated that I already paid for the phone and my ship date is now here and I do not have any additional information. Ihave been fairly patient up until this point but I would really like more of an answer than the Verizon rep checking a status I can check myself without any extra insight. With over 10 calls and countless wasted time in the past three days I am at my breaking point. I'm thinking of calling this a bait and switch situation by Verizon. I want to know what is going on!!!!!!

Hi Fashionny03,
My apologies to hear that your device has not meet the deliver by date. I have sent you a direct message for account review.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Totalizing a flow rate but not calculating if a negative number

I know how to take a flow rate and produce a totalizer using an integration. What I would like to do is not calculate the integration if the incoming rate should be a negative value. Thanks in advance for your help.

hound,
you may use an EXPRESSION OBJECT to eliminate negative values, something like:
if(YourSignal.value>0, YourSignal.value, 0)(if the value of your signal is greater than zero, use your signal, else zero)
and connect the output of this object to INTEGRAL.
Hope this help
JPSS

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. I need all three for a podcast, any solutions?

I have three Blue Yeti USB Microphones, and when I try to create an aggregate device in Audio MIDI on my MBP it lets me select two microphones but not the third. At first I thought maybe the third microphone was just defected or something but I tested the mic individually and it works fine. It'll let me use two Blue Yeti's and another microphone but not three Yeti's at once.

David Boroditsky wrote:
The problem is that the mac chokes on having 2 identical mics attached at the same time.
Ive had 2 identical USB AT2020 mics connected at the same time on both macbook pro and macbook Air.
The "Yeti" mics, are, lets say undesirable, and low to mid computer consumer mics.

IPOD detected by Windows but NOT iTunes – possible solution

I have a new 30GB Video IPOD with an AMD PC running Windows XP SP2 and like many others posting on this site, my iTunes stopped recognizing my IPOD. ITunes did work correctly immediately after my initial software installation and I was able to sync some music, but it failed thereafter and I was unable to add any more files. Like many other users, I tried all suggested fixes including the 5R’s, uninstalling and re-installing the software, changing selective start-up items using “MSCONFIG”, etc. Nothing worked – until I tried the following…
1) Uninstall iTunes & IPOD updater software using Windows Add/Remove Software tool in the Start/Settings menu
2) Reboot Windows
3) Connect IPOD to USB port (Windows should detect the IPOD)
4) Run the original IPOD CD installation disk, load the IPOD Updater software (but not iTunes …yet)
5) The IPOD Updater software loads first, so when prompted to load iTunes, wait (you may minimize the window), go into the IPOD Updater software (Start/Programs menu) and open the IPOD Updater window by clicking on the icon. If your system works like mine, the IPOD should now be recognized and the “RESTORE” button should now be available. Don’t click the “RESTORE” button – just leave this window open (minimize the window if you wish) and go back to the iTunes install window.
6) Continue with the installation of the iTunes software.
7) Once installed try opening the iTunes program to see if IPOD is detected (at this point it still didn’t work for me)
8) With the IPOD still connected, and the IPOD updater window still open, go to Add/Remove Software (Start/Settings) and click on “remove” iTunes – you’ll be prompted to “Repair” or “Remove”. Choose REPAIR. Once this process is complete, try opening iTunes again – at this point my computer now recognized the IPOD

i could do everything fine up until step 6), the installation of itunes. when i tried to, with the ipod updater window still open, it said it could not continue without closing the updater program. any suggestions?

HT2404 i pay for my software but not download

i pay for my software but not download yet...

If you're talking about Mountain Lion it can take a few hours (or more) for the download to complete.

Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.

Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

SD report on sales which have been delivered but not yet billed

Dear all,
Do we have any SAP SD standard report showing a total of the value (preferably by sales office) of sales which have been delivered but not yet billed.
Client has a legacy system which shows report showed up goods which have been PGI'd/delivered but not invoiced - this is exactly what what is required in SAP report.
Thank you in advance,
Sastry

Sastry,
I have used this report "Sales office Analysis- Invoiced Sales - MC-E"
I found something on this forum i.e
VL06F - general delivery list / List of outbound deliveries,
VL06T - outbound deliveries for transportation planning
I dont know if it is useful in any way.
Sridhar.

Total Gate in stock but not issued yet

Similar Messages

Maybe you are looking for