Lpq outputs print jobs + error T: unknown: moving-to-paused +

Dears,
I have setup remote printing, printing from the client show the print queue at print server(T) however command does not get executed and it outputs
print jobs + error "T: unknown: moving-to-paused"
When is triggered lpstat command before printing
# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T is idle. enabled since Sun Feb 19 12:03:31 2012. available.
When is triggered lpstat command After printing
bash-3.2# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T waiting for auto-retry. available.
Failed to open the printer port. (Device busy)
T-80 [email protected] 201097 Feb 19 12:28 f iltered
T-81 [email protected] 600569 Feb 19 12:28 f
lpq
===
bash-3.2# lpq
T: unknown: moving-to-paused
Rank Owner Job File(s) Total Size
1st appltest 80 /global/u02/oracle/TEST/inst/app201097 bytes
2nd appltest 81 /global/u02/oracle/TEST/inst/app600569 bytes

Hi Freind,
I hope you are doing good.
Q1l:-
Are these printers really physically attached to your Ultra-* parallel port (/dev/ecpp0)?
and what device is "/dev/lp1"?
Answer:-
"/dev/lp1" which is printer "T" and "/dev/ecpp0" which is printer "Alis" are configured at OS level via "printmgr" on the same machine.
This machine hostname is "tprinter" which is a print server. It is connected physically to "CIMA6120 LINE PRINTER".
[what I meant is: what physical port is this printer attached to on the Solaris machine? is this a Ultra 5/10/60 machine? I don't recall the /dev/ecpp port
existing on any modern sun hardware]
"failed to open printer port" can mean:
Answer2:- It's is a 25 pin serial port cable connected to 25 pin parallel port of Optiplex GX100 machine. I installed solaris 10 x86 to make print server. as our CIMA6120 its not a network printer, and our company want to print reports from oracle application to this printer.
Q:-you have attached your printer to the wrong port?
Answer: it is connected to the correct port.
[again . . how do you know this or test this?]
Answer2:- it is connected at the rare panel of the machine on a 25-hole connector (bidirectional).
Q:-you have attached your printer to the right port, but are using the wrong name?
Answer: I think we could have Alias, not necessarily give the same printer name.
[what i was getting at here is that you think the printer is attached to the parallel port, but actually the cable
is actually attached to the wrong port. For example the serial port on those older machines will fit but in that case, if you configure the printer with ecpp
it's not pointing to the correct port]
Answer2:- I configured CIMA6120 with "/dev/lp1" port which was perfectly working, I print numerous pages with this configuration, Suddenly this error "moving-to-paused" occurred. as i said it is connected to the parallel port at the rare panel. Initially, I attempted and tried to configure this printer with "/dev/ecpp0" port which was not successful.
Q:-you have a bad or wrong cable?
Answer:- I have checked the cable it is good.
[how did you do the checking?]
Answer2:- I tested the cable by connecting to other printer and it printed. so no problem with the cable.
In the olden days when local printers like this was the norm, we'd do test like catting a file to the port and see if the printer lights
up or responds. Something like: cat /etc/hosts > /dev/ecpp0 (or /dev/lp1, or whatever the device is). Then observe if the printer seems to
receives anything, blinks, prints the host file. You are copying the file directly to the port outside of lp or other mechanism.
Answer2:- I agree there was some conflict among the ports internally, or some process may be running at the background, that is why though it shows the request waiting in the queue it was moving to pause for some reason. when I check the error by command "lpstat -t" it sez "device busy" in /dev/lp1" file.
Solution
============
After goggling some more I found a fix for this issue at http://fixunix.com/solaris/143011-unaccepted-printer.html
1, I tried to remove the printer from printmgr, cud not remove it.
2, try kill the entries that going to /dev/lp1 port to printer "T". could not do it
3, uncheck the default printer option via printmgr.
4, Add a new printer name "test" with /dev/ecpp0" and reproduce the issue "got the same error"
5, With the forum above it sez its a "bug" and the Bug ID: 6374608. here are the details of it:-
Synopsis: No /devices entry for line printer
http://bugs.opensolaris.org/bugdatab...bug_id=6374608
Workaround is to manually install the missing driver binding
entry, using the command:
update_drv -a -i '"lp"' ecpp
This workaround should create the missing /dev/lp* devices. And after
running it, you should find the following line in "prtconf -D" output:
lp, instance #0 (driver name: ecpp)
6, I unplug the serial cable from the printer and turnoff and replug the serial cable to the printer and turn on the printer, made sure printer is ""ONLINE".
7, I restart the Solaris machine and delete the newly created "Test" printer via printmgr.
7, I just gave the lp /etc/passwd and it printed.
Finally, I thank you for your time and suggest me your opinion on this solution please.
Regards,
MKY
Edited by: user9007339 on Feb 22, 2012 12:15 AM
Edited by: user9007339 on Feb 22, 2012 12:21 AM

Similar Messages

Print Job Error in F110

Hi all,
I am getting an error when I try to schedule print job in F110. After giving the Run date and identification, I am clicking on the printout button and filling the scheduling details there. But when I take the payment log, it is showing that "File can not be down loaded" "Job cancelled after system exception ERROR_MESSAGE".
Has anyone experinced this? Please tell me how to solve this issue...
Thanks in advance...

Hi,
Check this SAP note if it is valid.
Note 1114466 - F110 Termination in proposal run after error message
Also in SM37 you can get the job name and in the job log what program has been started . You can check in Market place for some notes if it is a standard error.
Regards

Cannot cancel print job - error ePC 551

I cannot cancel print jobs, when i click the cancel option I get and error code ePC551

Resolved...just had to go into Devices and Printers, select the printer and cancel the job.

I cannot print, get error 'An unknown error occurred while printing."

I can see that hundreds of other people also have this problem and I can't understand why Mozilla don't fix it.
When I go to print an email or a receipt, whether by printer or by PDF, I *sometimes* get the error, 'An unknown error occurred while printing.'
It is very frustrating as the problem is intermittent. Sometimes it works, sometimes it doesn't... even with the same page being printed. Incidentally, that page can be printed in both Chrome and Internet Explorer without a problem.
I have tried other "solutions" in similar, now closed, threads. However, 'reset' is not working for me. Closing Firefox and reopening doesn't work either. I have the latest version of Firefox: 14.0.1 and have Windows x64. There is enough available space in the cache...
I'm just at my wits end with this.

With the latest updates FF 19 BETA and Acrobat X. The new one with the black PDF screen), I'm having difficulty too printing to Adobe PDF. System Win 7 x 64.
Printing to physical printers not an issue.
No errors, but (Not Responding either in FF or Acrobat.) Printing to the PDF printer directly sometimes works. Using the work-around fast enough, it seems to always work.
I found a work-around:
Goto Print Preview
Select Print
Type in your file name
IMMEDIATELY press OK and Minimize Firefox.
All of the progress boxes/windows are getting confused otherwise. With FF opened as a normal page, there are too many different progress boxes.
Acrobat has one, the windows print driver has one, FF seems to have one and they all can't be on top.
They will if FF is minimized.
Incidentally if FF is killed, the "Creating Adobe PDF" shows its face from being hidden.
I did reset Firefox.
This is seriously messed up now. It used to work fine until the last round of updates from M$, Adobe and FF.

Error #2057: The page could not be added to the print job.

I've been making myself crazy over this one. I'm trying to print a complex multi-page "report" in Flex, but I keep getting this error every time I try to call FlexPrintJob.addObject(page):
Error #2057: The page could not be added to the print job.
Here is the basic scenario... I have created a new control I call a PrintVBox that extends the normal VBox control. After adding all of the children properly to the component, I wait for an update event (so that the heights of all the components are calculated) and then I call a custom method I have added to PrintVBox that "paginates" the control.
This pagination method essentially decides how many of the items in the VBox can fix on each page, and splits them up into separate pages. Here's a somewhat graphic example of what happens:
(before paginate)
***** PrintVBox ********
     [ Item 1 ]
     [ Item 2 ]
     [ Item 3 ]
     [ Item 4 ]
     [ Item 5 ]
This single VBox with 5 items, after calling the paginate method becomes something like this:
(after paginate)
****** PrintVBox ********
     **** VBox (page1) ******
               [ Item 1 ]
               [ Item 2 ]
     **** VBox (page 2) ******
               [ Item 3 ]
               [ Item 4 ]
               [ Item 5 ]
So, what was once a single VBox with 5 UIComponents on it is now a VBox that contains two VBoxes, each the exact size of a printable page, one containing the first two items, the other containing the second two items.
In my example that I am working on, my PrintVBox that I have created uses a Repeater to create about 20 HBoxes on the page. I then call
myFlexPrintJob.start()
to show the print dialog and get the user's parameters. I then pass the chosen print height and width to the PrintVBox control and call the paginate method, which creates pages of the desired width/height. I have tested this part thoroughly and displayed the resulting PrintVBox on the screen and it paginates successfully and all is well. After paginate, it has created 3 page VBoxes each holding some of those 20 items.
I then iterate thru PrintVBox.getChildren() array, in this case which is the three VBox pages, and I call:
myFlexPrintJob.addObject(page);
for each one. Each one errors out with the above error. The error is down in the PrintJob code, which is part of the Flash framework and I cannot step through it. I have no indication of why the page can't be added to the print job. Is there a reason this is happening?? Does it have to do with the Repeater that originally created the 20 HBoxes, even though I have now moved those HBoxes down onto separate pages? I'm just so confused here.
I can probably post the entire code chunk if someone really wanted it. I'm currently testing it as an AIR application using a big tester XML data object on the repeater, so that I didn't need a database and such to create the control and test printing. If someone really wants to see what I'm doing, let me know.
HELP! PLEASE!!
Thanks,
Joe

Were you able to solve this problem?
I am currently having the same problem as yours... I created my own printing classes that do all crazy calculation to figure out page breaks and stuff... everything goes well until the point I want to add these pages to the printJob. I get same error?
Any help is highly appreciated.
Thanks,

Print jobs keep starting and then error in print que

I have a HP Photosmart 100D series printer. The print jobs keep freezing up in the que. The jobs start and then after a page or two the error message appears when checking the status.
I uninstalled the printer and reinstalled
I have download new drivers
I have run the "HP Print Doctor" it gives a message to save work, close and programs and restart the PC and then restart the ulitity. I have done this and still get the message that it cannot fix the que error.
What do you suggest as a solution to this frustrating problem?
I have Windows 7 Professional OS

Hmm. I have an HP printer that's behaved fine, but I've moved it to my iBook (running Tiger) so I can print wirelessly.
It may be an issue with the driver or the software. I'm guessing the software was written for the PPC machines, and that might be causing the problem.
The way I've checked this is to open up "Activity Monitor" (Applications>Utilities) and find the processes related to your HP printer (usually begin with "hp") under kind what's shown?
You might want to look into the CUPS idea presented earlier as it may give you better results.
~Lyssa

Inconvenient printed job results Output ES4

Hi all,
I was testing some printing jobs using default XDC that comes with LiveCycle ES4 installation (hppcl5c.xdc, hppcl5e.xdc and hp4350pcl5e.xdc), but i got Inconvenient results when sending the job to print; xml data and logo have been moved into the printed form causing they don't match with the form components as should be at design time. Consulting SAP documentation for Adobe Document Services, it says that there should be XDC files that are shipped for diferent device types like POST2, HPLJ4, HP9500, etc. I'm using a Sharp - MX M264N printer that supports PCL 5e, PCL 6. I have the same design but IFD Form in Adobe Central Output with HPLJ4 selected option as device printer in Presentment Targets and it works fine. ¿Where can i find a XDC library or a HPLJ4 XDC in order to obtain the same result just as in Adobe Central?
Best regards,

I did finally find an open bug, # 4527394, that appears to address this issue. I found a solution for the printer that is currently giving me headaches, which is an HP LaserJet 2300d. I turned off the "Enable advanced printing features" setting on the printer's Advanced Properties, and the problem went away. Other applications, such as Adobe Acrobat, are able to print similar documents to the same printer reliably even if "Enable advanced printing features" is enabled, however, so this is really just a workaround, and indicates that Sun's JVM has some fundamental problems in its printing facilities, at least on the Windows platform.
Kevin Rahe
KRAHE InfoSystems, Inc.

Spool Print Error- Output Print Overlapping

Dear Experts,
I Have developed smart form for PO print
It is printing perfectly when it is only one page
IF the print exceeds the one page the print preview & spool both showes more than one page and preview is perfect. But when it is sent to printer(output request generated) all the pages gets overlapped and the print comes only on one page.
When checked in SP02 for the error log the following description is there
======================================================
      SAP spool error log
      =====================
Print request processing log
Character converter active when first problem occurred
Data was saved with character set 4102
Data will be converted to character set 1134 (synt = 1134)
Errors occurred processing this print request
OTF module: Unknown print control SF011 should be output
OTF module: Unknown print control SF201 should be output
OTF module: Unknown print control SF011 should be output
OTF module: Unknown print control SF201 should be output
OTF module: Unknown print control SF011 should be output
OTF module: Unknown print control SF201 should be output
Most important attributes of spool request
Request number 8176
Request name SMART DOT USERNAME
Client 210
Owner USERNAME
Request attributes
Time created   2009050609530900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device DOT
Default no. copies 1
Format ZDOT_230_305
Main print request characteristics
Spool request number 8176
Print request number 1
Print request attributes
Time created   2009050609530900
Output device DOT
Format ZDOT_230_305
Character converter active when first problem occurred
No information available
      SAP spool error log
      =====================
Print request processing log
Print output may not be as intended
Most important attributes of spool request
Request number 8176
Request name SMART DOT USERNAME
Client 210
Owner USERNAME
Request attributes
Time created   2009050609530900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device DOT
Default no. copies 1
Format ZDOT_230_305
Main print request characteristics
Spool request number 8176
Print request number 1
Print request attributes
Time created   2009050609530900
Output device DOT
Format ZDOT_230_305
Character converter active when first problem occurred
No information available
==========================================================
Checked everywhere but did not get the results where the problem is
Please help
Shreenivas

Hi ,Iam facing same problem with my check -printing.Please reply me with solution if u still remember .
Thanks.
By the way u I created a new Page format and assigned it in SPAD.
when iam using DINA$ format ,Its printing properly.

HP Envy 4500 All in One - Printer Error - not finishing print job / non-specific error code

Help - my new HP ENVY 4500 AIO (less 3 months old) has never completed a print job if it is over 1 page. I'm connected wirelessly, and not sure if there is an interruption in the wireless connection or if this is defect in the printer. I receive a message "Printer Error - HP ENVY cancelling print job" and that's it. It will usually happen when it's on the last page of a small print job or half way thru a large (10+ page) of a print job. Any suggestions? I've downloaded HP Print/Scan Dr - it didn't find any issues.

I had the same issue. Got in contact with HP customer service and the first person that helped had no idea how to fix it. Got in contact with someone else and they found the issue right away. I had it connected through the wrong port.
First find out what the IP address of your printer is. You can do this by pressing the small wifi button on the front of your printer and it will show the IP address.
Then what you'll have to do is go to the start menu of your computer and search for "Devices and Printers".
Click that and a screen will open. Look for your printer an right click.
Click "Printer Properties" and a new screen will open.
Along the top you will see a few tabs. Click the one that says "Ports"
Click "Add Port"
Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port"
A new screen will open.
Click "Next"
Type in the IP Address of your printer and click "Next"
After that your computer should find your printer.
Click finish and you should be all set.
Hope this helps.

Initial Print jobs 'communication error with device'. Pause and restart job

So, I have an odd variant of the Leopard print problem; on 3 separate systems.
When I print to an HP Photosmart C7180, which setup fine, which I can scan to fine, the print job throws an error :error communicating with device, switch on and off' and so forth. It does that from any app, and consistently. I am printing via bonjour, the printer is networked, but on a static IP.
To fix this EVERY-TIME I PAUSE printer, then start printer again. It immediately starts working, consistently until I sleep, log out, or don't print for a while.
This seems to be some timeout issue or such. I tried IP printing, but no difference.
Resetting the print system also did not help.
It's not catastrophic but sooo annoying. Any input appreciated!
Thx,
Dan

Hello SunnygirlQ. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Extreme and AirPort Express
I assume that this printer works just fine when it is connected directly to your Mac ... correct? If so, has it worked when connected to the AX in the past ... or has it always had this problem? If it did work correctly before, did you do any updates, especially to the AX, recently?

Fin Rep 9.3.1 Error 5200 " Unknown Member: Same as Column A" in print prev

Using Hyperion Financial Reporting Studio 9.3.1, we are attempting to print preview a report and received the following message:
+5200 : Error executing query: ServerName/AppName/FinPlan/UserName/Error(1001005) Unknown Member [Same As Col A] in Report+
Error 1001005 is defined as "Unknown Member [%s] in Report"
This seems odd to me as "Same as Column A" functionality is built into the application.
Others have suggested on these forums that it could be a problem in the user POV. We don't seem to have a Hyperion/BIplus/bin/DeletePOV.cmd file in our system; perhaps that is another version of the software.
This occurs both in Web view and when trying to print preview to PDF.

What happens if you try and run the report from the workspace?
I've seen some issues where conditional suppression didn't work in print preview from the studio but did when running the report in the workspace.
I don't tend to rely on the print preview option anymore.

Job error in external Service when printing from Google Cloud: HP Laserjet Professional P 1102w

I have set up my printer and associated it with Google Cloud Printing. I have shared the printer with my daughter who is on a chromebook. When she tries to print, the printer is there and the job is sent to ePrint bu I get an error saying: "job error in external service". No documents are able to print. Google says this is an HP problem.
I have deleted the printer on my daughters account and re-shared it and reassociated it, but this does not help. On my printers page, my daughter's google account is identified as "allowed to print". But it still doesnt work. Any ideas?
This question was solved.
View Solution.

Hello mapuche,
Welcome to the HP Support Forums!
Will the Laserjet P1102w accept an ePrint from any / all other areas? For example, if (on the Chromebook) you open an Email, forward the Email to the printers ePrint address, will it print?
Try logging into HPConnected, under Devices, click Settings> Open to Anyone.
Try sending a print via Google Cloud Print now with this setting enabled, let me know if it sends the print through. I have seen this straighten many issues out.
Would not be a bad idea to check for firmware updates on the printer too: HP LaserJet P1102w Firmware Update Utility<---A USB connection and Windows computer is needed.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

P3005 error message PCL XL error IllegalMediaSource extra sheet printed after every print job

We have a networked P3005 with a stepped back PCL5e driver working for three Word 2003 people and one Word 2007 person. Out of the blue the Word 2007 person began getting an extra sheet of paper after every print job with the error message PCL XL error Warning: IllegalMediaSource. We had gotten a version of this error before, which is why I stepped back the driver to PCL5e.
Anyone have any thoughts? Please??

I have not had any problems since I read a post from someone to turn the printer off unplug the power cord from it and wait a little bit. Plugged it back in, turned it on and it has been working. I am using Vista 32 bit. I'm not sure this is what you are wanting on the driver. I found this HPC14106 .GPD 3.25.2010
Thanks

Help! One error printing and now all print jobs status = STOPPED.

I work in a big corporation with 99.99% PCs. I've been printing to networked printers here under Leopard without problem for a long time now. I recently submitted a print job to a HP printer and all it printed was:
Error: invalidfont
OFFENDING COMMAND: definefont
STACK:
-dictionary-
/HSRYIE+ArialNarrow-Italic
However, since that moment I have been unable to print anything irrespective of what printer I choose (HP, Xerox etc). Every time I start a job it immediately shows with a status of STOPPED in the printer window. Other people continue printing to these printers just fine, snickering at my Mac along the way .
Any ideas??

Hoping to inspire some tech-head to respond here...
Restarting doesn't fix this. Repairing permissions doesn't fix this. Removing and reinstalling the printer doesn't fix this.
When I create a print job I get the following in the error_log:
I [30/Jan/2008:07:53:10 -0700] [Job 63] Adding start banner page "none".
I [30/Jan/2008:07:53:10 -0700] [Job 63] Adding job file of type application/pdf.
I [30/Jan/2008:07:53:10 -0700] [Job 63] Queued on "146_252_6468" by "mmueck".
I [30/Jan/2008:07:53:10 -0700] [Job 63] Started filter /usr/libexec/cups/filter/cgpdftops (PID 5036)
I [30/Jan/2008:07:53:10 -0700] [Job 63] Started filter /usr/libexec/cups/filter/pstops (PID 5037)
I [30/Jan/2008:07:53:10 -0700] [Job 63] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 5038)
I [30/Jan/2008:07:53:10 -0700] [Job 63] Started backend /usr/libexec/cups/backend/lpd (PID 5039)
E [30/Jan/2008:07:53:10 -0700] [Job 63] `/private/var/spool/cups/d00063-001' has permissions that do not allow printing!
E [30/Jan/2008:07:53:10 -0700] PID 5036 (/usr/libexec/cups/filter/cgpdftops) stopped with status 1!
I [30/Jan/2008:07:53:10 -0700] Hint: Try setting the LogLevel to "debug" to find out more.
E [30/Jan/2008:07:53:10 -0700] [Job 63] Empty print file!
E [30/Jan/2008:07:53:10 -0700] PID 5037 (/usr/libexec/cups/filter/pstops) stopped with status 1!
I [30/Jan/2008:07:53:10 -0700] Hint: Try setting the LogLevel to "debug" to find out more.
E [30/Jan/2008:07:53:10 -0700] [Job 63] Job stopped due to filter errors.
I homed in on the spooled file permissions issue and (as root) changed the permissions of that file to 777 and re-submitted the job, yielding the following log:
I [30/Jan/2008:07:56:26 -0700] [Job 63] Started filter /usr/libexec/cups/filter/cgpdftops (PID 5058)
I [30/Jan/2008:07:56:26 -0700] [Job 63] Started filter /usr/libexec/cups/filter/pstops (PID 5059)
I [30/Jan/2008:07:56:26 -0700] [Job 63] Started filter /Library/Printers/hp/filter/hpPostProcessing.bundle/Contents/MacOS/hpPostProces sing (PID 5060)
I [30/Jan/2008:07:56:26 -0700] [Job 63] Started backend /usr/libexec/cups/backend/lpd (PID 5061)
I [30/Jan/2008:07:56:26 -0700] [Job 63] Restarted by "mmueck".
E [30/Jan/2008:07:56:26 -0700] [Job 63] `/private/var/spool/cups/d00063-001' has permissions that do not allow printing!
E [30/Jan/2008:07:56:26 -0700] PID 5059 (/usr/libexec/cups/filter/pstops) stopped with status 1!
I [30/Jan/2008:07:56:26 -0700] Hint: Try setting the LogLevel to "debug" to find out more.
E [30/Jan/2008:07:56:26 -0700] PID 5058 (/usr/libexec/cups/filter/cgpdftops) stopped with status 1!
I [30/Jan/2008:07:56:26 -0700] Hint: Try setting the LogLevel to "debug" to find out more.
E [30/Jan/2008:07:56:26 -0700] [Job 63] Empty print file!
E [30/Jan/2008:07:56:26 -0700] [Job 63] Job stopped due to filter errors.
If anybody can even offer a clue to what happened here I'd be very appreciative.
Mick.

Bakground job failed with error EXSQL UNKNOWN CONNECTION

Hello,
We are scheduling job is background which connects to other system and picks up entries to update it.
The report works very well in foreground no error, no dumps, no connectivity issues.
When report is schedule in background it gives dumps throwing error 'EXSQL UNKNOWN CONNECTION' which is near the DISCONNECT statement.
All authorisation and everything is in place as job runs in foreground and also in background sometimes.
Please help.

Hi Sunny,
Yes I have analysed the dumps in st22.
We have scheduled the background jobs which are exchanging data with external databases.
Sometimes these background jobs get finished and sometimes it gets cancelled and gives the above mentioned ABAP dumps.
I am not sure whether it is related to the database connectivity or something else?
Waiting for the response.
Thanks & Regards,
Prem

Lpq outputs print jobs + error T: unknown: moving-to-paused +

Similar Messages

Maybe you are looking for