LR 3.6 Catalogue unable to be optimized
In Lightroom 3.5 and now 3.6 every attempt to optimize my catalogue results in the error message "Your catalog was not optimized and Lightroom must restart. Lightroom will check the catalog for damage when it resumes."
Lightroom resumes, and everything seems fine (but giving optimization another try results in the same failure). I have backed up my catalog successfully by NOT allowing it to optimize after saving. LR managed a successful optimization 2/14/12, but now it's not working.
I found one previous post (from 2009) stating a similar problem. They fixed it by going to Edit -> Preferences -> File Handling -> and purging the Camera RAW cache and increasing the cache setting. Mine was 1.0 GB, and even increasing it to 15 GB has made no difference.
Any advice is much appreciated!
Machine specs:
Lightroom version: 3.6 [795620]
Operating system: Windows 7 Business Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 4
Processor speed: 2.5 GHz
Built-in memory: 8181.8 MB
Real memory available to Lightroom: 8181.8 MB
Real memory used by Lightroom: 223.9 MB (2.7%)
Virtual memory used by Lightroom: 208.3 MB
Memory cache size: 140.5 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
You triggered an idea. The catalog had been residing on my laptop's main drive (unable to be optimized). I ended up loading an identical back-up copy of my catalog on an external drive into LR, and chose to optimize that catalog within LR. It worked. I moved the original catalog into a separate directory (just in case) and then copied the newly-optimized catalog onto my laptop's hard drive (in the place where it usually resides).
I was able to then run LR using this optimized catalog, and successfully backed it up onto the laptop drive without incident (successfully optimizing the catalog again).
So, I think you are right in that there are some bad sectors or something hardware related in my case.
Success. Thank you.
Similar Messages
-
How can I get correct English spelling in Lightroom 3 (UK/Canada)
I tried to download the software from the UK site and the Canadian one but it kept sending me to the US site. All I want is the 'u' in colour! Is there proper spelling in another version out there and if so, how can I get it instead?
A 'u'! My kingdom for a 'u'!FYI: For anyone else trying the translation file solution.
As brilliantly suggested by Dorin above, I modified a number of 'en' translation files in the Lightroom 3 installation. I didn't have the 'en' directory under the 'Resources' directory but found that if I created this directory and put another translation file in it, Lightroom picked it up when loading.
All I ended up having to do was to add the specific lines I wanted modified. For anyone interested, here are the contents of that file so far. There may be minor mistakes as nothing translates from another language perfectly.
"$$$/AgCameraRawNamedSettings/SaveNamedDialog/Color=Colour"
"$$$/AgDevelop/ColorMode/Color=Colour"
"$$$/AgDevelop/Localized/Color=Colour"
"$$$/AgLibrary/Filter/BrowserCriteria/Treatment/Color=Colour"
"$$$/AgLibrary/MiniDevelop/Color=Colour"
"$$$/AgDevelop/ColorAdjustments/WhichSliders/ByColor=Colour"
"$$$/AgLibrary/AlreadyInUseFileDialog/Already In Catalog=Already in the catalogue"
"$$$/Application/Menu/File/LibraryInfo=Catalog&ue Settings..."
"$$$/1.x_Upgraders/OptimizingCatalog=Optimize Catalogue"
"$$$/AgCatalogBackup/CheckingIntegrity/Messge=Checking the integrity of the catalogue"
"$$$/AgCatalogBackup/DoingBackup/Message=Backing up the catalog"
"$$$/AgCatalogBackup/Optimizing/Messge=Optimize Catalogue"
"$$$/AgCatalogBackup/VacuumingPreviews/Messge=Optimizing previews catalogue."
"$$$/AgCatalogFile/ExportImages/DBToDBCopy/Step/CleanupExportCatalog=Finalization of the new catlogue"
"$$$/AgCatalogFile/ExportImages/DBToDBCopy/Step/CopyCollections=Copying collections in the new catalogue"
"$$$/AgCatalogFile/ExportImages/DBToDBCopy/Step/CopyImageProperties=Copies properties of the image in the new catalogue"
"$$$/AgCatalogFile/ExportImages/DBToDBCopy/Step/CopyImages=Copying pictures in the new catalogue"
"$$$/AgCatalogFile/ExportImages/DBToDBCopy/Step/CopyKeywords=Copy of keywords in the new catalogue"
"$$$/AgCatalogFile/ExportImages/DBToDBCopy/Step/CreateNewTempCatalog=Creating an export catalogue"
"$$$/AgCatalogFile/UpgradeFailure/Title=Unable to upgrade the catalogue"
"$$$/AgCatalogOptimize/OptimizeAgain/Message=The last optimization of your catalogue was made ^ 1 @ ^ 2. If you have not recently optimized and see a performance degradation, the performance of optimization will possibly remedy this problem."
"$$$/AgCatalogOptimize/OptimizeFirstTime/Message=If your catalogue is large and that its performance is slow, the optimization can improve performance."
"$$$/AgCatalogOptimize/ProgressDialog/Title=Optimize Catalogue"
"$$$/AgCatalogOptimize/ResultDialog/Failure/Hint=On the resumption, Lightroom will check if the catalogue is not damaged."
"$$$/AgCatalogOptimize/ResultDialog/Failure/Message=Your catalogue has not been optimized, and you must restart Lightroom."
"$$$/AgCatalogOptimize/ResultDialog/Success/Message=Your catalogue has been optimized."
"$$$/AgCatalogRepair/FixingPrimaryKey=Examination of the internal structures of the catalogue."
"$$$/AgCatalogRepairUI/CannotUsePreviewCache/PreviewCacheHasBeenMoved/Message=Lightroom cannot use existing preview catalogue of images in the repaired catalogue ^[^1^]. Lightroom has moved these obsolete previews to a new location and may remove them if it thinks fit."
"$$$/AgCatalogRepairUI/CannotUsePreviewCache/UnableToMovePreviewCache/Message=Lightroom cannot use existing preview catalogue of images in the repaired catalogue ^[^1^]. Lightroom has moved these obsolete previews to a new location."
"$$$/AgCatalogRepairUI/CorruptCatalog/FileName=Catalogue corrupted"
"$$$/AgCatalogRepairUI/CorruptCatalog/FolderName=Catalogues corrupt"
"$$$/AgCatalogRepairUI/CorruptDB/Error/Message=The Lightroom catalogue ^[^1^] is corrupted. It can not be used or stored before being repaired."
"$$$/AgCatalogRepairUI/CorruptDB/Error/Title=Catalogue detected corrupted"
"$$$/AgCatalogRepairUI/DiskTooFullBeforeRepair/Error=The Lightroom catalogue can not be repaired because there is not enough space on the hard disk named ^[^1^]."
"$$$/AgCatalogRepairUI/RepairCatalog/Button=Repair Catalogue"
"$$$/AgCatalogRepairUI/RepairFailure/ChooseAnother/Button=Select another catalogue"
"$$$/AgCatalogRepairUI/RepairFailure/Corrupt/Hint=Use a recent backup of current catalogue or refer to technical documentation to see other options."
"$$$/AgCatalogRepairUI/RepairFailure/Corrupt/Message=The catalogue called ^[^1^] unfortunately can not be repaired."
"$$$/AgCatalogRepairUI/RepairFailure/Corrupt/Title=Unable to repair the corrupted catalogue"
"$$$/AgCatalogRepairUI/RepairFailure/TransientFailure/Title=Unable to repair the corrupted catalogue now"
"$$$/AgCatalogRepairUI/RepairProgress/ProgressDialog/Message=Wait until you try to repair the Lightroom catalogue ^[^1^]. Additional instructions will be provided upon completion of the operation."
"$$$/AgCatalogRepairUI/RepairProgress/ProgressDialog/Title=Repair of current catalogue"
"$$$/AgCatalogRepairUI/RepairProgress/ProgressScope/Title=Repair Catalogue"
"$$$/AgCatalogRepairUI/RepairSucceed/Message=The catalogue ^[^1^] was repaired."
"$$$/AgCustomMetadataRegistry/UpdateCatalog/Error=Unable to upgrade your catalogue for metadata plugin."
"$$$/AgCustomMetadataRegistry/UpdateMultiple/Title=You need to upgrade your catalogue before you can use with the following plugins ^1 :"
"$$$/AgCustomMetadataRegistry/UpdateMultiple/UpdateButton=Update catalogue"
"$$$/AgCustomMetadataRegistry/UpdateProgress/Caption=Update catalogue data plug"
"$$$/AgCustomMetadataRegistry/UpdateSingle/UpdateButton=Update Catalogue"
"$$$/AgCustomMetadataRegistry/UpdateSingle/UpdateButton=Update Catalogue"
"$$$/AgCustomMetadataRegistry/UpdateSingle/Title=You need to upgrade your catalogue before you can use with the following plug :"
"$$$/AgExport/ConfirmCancelCopying/QuitExportToCatalog/Button=Cancel Export as Catalogue"
"$$$/AgExport/ConfirmCancelCopyingNegatives/Title=Would you cancel the remaining copies of the negatives or all of the export operation as a catalogue ?"
"$$$/AgExport/ConfirmCancelCopyingPreviews/Title=Want to cancel the remaining copies insights or all of the export operation as a catalogue ?"
"$$$/AgExport/ConfirmCancelExportToCatalog/Info=If you cancel the export as a catalogue, Lightroom removes files that were copied to the export folder."
"$$$/AgExport/ConfirmCancelExportToCatalog/Title=Would you really want to cancel the export as a catalogue ?"
"$$$/AgExport/ConfirmCancelExportToCatalog/Info=If you cancel Export as catalogue, Lightroom will delete all files are copied to the location of export."
"$$$/AgExport/ConfirmCancelExportToCatalog/Title=Would you really want to cancel the export as a catalogue ?"
"$$$/AgExport/CopyingPreviewsAndNegatives/Summary=Export Catalogue"
"$$$/AgExport/DestinationFolder/ChooseLater/Synopsis=Select Catalogue later"
"$$$/AgExport/ExportCatalog/UnknownFailureDialog/Message=Lightroom was unable to export the catalogue because of an unexpected problem."
"$$$/AgExport/ExportLibraryFailed/CopyDBFailureDialog/Details=Lightroom was unable to copy the exported catalogue named to the final location in ^[^1^]."
"$$$/AgExport/ExportLibraryFailed/CopyDBFailureDialog/Summary=Lightroom was unable to export the catalogue called ^[^1^] and shall cancel the export catalogue."
"$$$/AgExport/ExportLibraryFailed/FailureDialog/Summary=Lightroom was unable to create the new catalogue due to an unexpected problem."
"$$$/AgExport/ExportLibraryProblem/NonemptyDestDir/Message=A catalogue called ^[^1^] already exists at the location you have selected"
"$$$/AgExport/ExportLibraryProblem/NonemptyDestDir/Remedy=Choose a different catalogue name or another location."
"$$$/AgExport/ExportLibrarySomeErrors/CopyFilesFailureDialog/Summary/Message=Lightroom has managed to export some photos in the new catalogue, but encountered the following problems."
"$$$/AgExport/ExportLibrarySomeErrors/Summary/Title=Problems with export as a catalogue"
"$$$/AgExport/Library/Collections/ExportToCatalogProblems=Problems with export as a catalogue"
"$$$/AgExport/ReimportExportedPhoto=Add to this catalogue"
"$$$/AgExport/ToCatalog/DiskFull/Error=Insufficient disk space on the disk ^[^1^] where you export the catalogue."
"$$$/AgExportCatalog/ModalProgress/Message=Exporting the new catalogue"
"$$$/AgExportCatalog/ModalProgress/Title=Export Catalogue"
"$$$/AgExportCatalog/MoveCatalogToFinalDestination=Copy the new catalogue to the final location"
"$$$/AgExportLibrary/ExportingManyPhotoAndManyVirtualCopiesLabel=Exporting a catalogue with ^1 photos and ^2 virtual copies."
"$$$/AgExportLibrary/ExportingManyPhotoAndOneVirtualCopyLabel=Exporting a catalogue with photos and a ^1 virtual copy."
"$$$/AgExportLibrary/ExportingManyPhotoLabel=Exporting a catalogue with a ^1 photos."
"$$$/AgExportLibrary/ExportingOnePhotoAndManyVirtualCopiesLabel=Exporting a catalogue with a photo and a ^1 copies."
"$$$/AgExportLibrary/ExportingOnePhotoAndOneVirtualCopyLabel=Exporting a catalogue with a photo and a virtual copy."
"$$$/AgExportLibrary/ExportingOnePhotoLabel=Exporting a catalogue with a photograph."
"$$$/AgExportLibrary/LightroomLibraryExport=Export from Lightroom - ^1"
"$$$/AgExportLibrary/Prompt=Export Catalogue"
"$$$/AgExportLibrary/Title=Export as Catalogue"
"$$$/AgImport/ErrorDialog/NotImportedAlreadyExistMsg/Plural=The files already exist in the catalogue."
"$$$/AgImport/ErrorDialog/ProblemImportingFromCatalog=Problem importing from catalogue"
"$$$/AgImport/ImportImagesAlreadyPresent/MainMessage=The following photos will not be imported because they are already present in the catalogue. ^nTo view these photos in the catalogue, select ^{View in the Library^} (the import will be canceled)."
"$$$/AgImport/Library/Collections/AlreadyInLibrary=Already in the catalogue"
"$$$/AgImport/MetadataBadge/Duplicate/libraryRootFileIsMissing/details=This photo is already in the current catalogue. The original negative of the current catalogue is missing."
"$$$/AgImportDialog/CannotUseCatalog/Message=Lightroom can not import from the catalogue."
"$$$/AgImportDialog/CantImportCurrentLibrary=You can not import from the Lightroom active."
"$$$/AgImportDialog/CantImportLibraryAndRawFilesAtSameTime=You can import up a Lightroom and Raw files individual."
"$$$/AgImportDialog/CantImportLockedDB=This catalogue is in use by an instance of Lightroom."
"$$$/AgImportDialog/CantImportMultipleLibraries=You can import one Lightroom at a time."
"$$$/AgImportDialog/CantImportOpenLibrary=Unable to use the catalogue to import. The catalogue is in use by another copy of Lightroom or it was closed incorrectly. In the latter case, perform an integrity check at the opening."
"$$$/AgImportDialog/CantImportOpenLibrary/LowDiskSpace=Unable to use the catalogue to import. Disk space is insufficient to create a temporary working copy of the catalogue."
"$$$/AgImportDialog/CantMakeLibraryWritable=Unable to use the catalogue to import. Unable to write to the temporary working copy of the catalogue."
"$$$/AgImportDialog/CatalogTooNew/Hint=The catalogue was created with a newer version of Lightroom."
"$$$/AgImportDialog/CatalogTooOld/Message=The catalogue was created under a version of Lightroom too old to use with this version of Lightroom."
"$$$/AgImportDialog/CopyFilesToLightroomLibrary=Copy photos to a new location and add them to the catalogue"
"$$$/AgImportDialog/CopyPhotosAsDigitalNegativeDNG=Copy photos as digital images (DNG) and add to the catalogue"
"$$$/AgImportDialog/ErrorImportingLibrary=Lightroom can not import this catalogue due to an unknown error."
"$$$/AgImportDialog/ImportFromLibrary/CopyingLibrary=Creating a temporary working copy of the catalogue"
"$$$/AgImportDialog/InvalidCatalog/Hint=The catalogue is not a valid Lightroom."
"$$$/AgImportDialog/MoveFilesToLightroomLibrary=Move photos to a new location and add them to the catalogue"
"$$$/AgImportDialog/PreImport/Comparing=Comparison with the contents of the catalogue ..."
"$$$/AgImportDialog/ReferenceFilesInExistingLocation=Add photos to catalogue without moving"
"$$$/AgImportFromCatalog/ImportingPhotos=Import photos from the catalogue"
"$$$/AgImportFromCatalog/MetadataBadge/Duplicate/ImageIsDifferent/hint=This photo is already in the current catalogue, and its parameters are different."
"$$$/AgImportFromCatalog/MetadataBadge/Duplicate/OriginalIsMissing/hint=This photo is already in the current catalogue. The original negative of the current catalogue is missing."
"$$$/AgImportFromCatalog/ModalProgress/Title=Import from Catalogue"
"$$$/AgImportFromCatalog/Preparing=Preparing to import from the catalogue"
"$$$/AgImportFromCatalog/Tooltip/Duplicate/copyNegativesForChangedPhotosNonRawOnly/WontImp ortThisRaw=The Raw file will not be duplicated copied, but the parameters of imported catalogue will be transferred.
"$$$/AgImportFromCatalog/Tooltip/Duplicate/ignoreThisDuplicate=This photo is already in the catalogue, and its parameters are different."
"$$$/AgImportFromCatalog/Tooltip/Duplicate/originalMissingCopyingFromImported/settingsIden tical=The missing original file is copied from the imported catalogue. The existing settings are preserved.
"$$$/AgImportFromCatalog/Tooltip/Duplicate/settingsChanged/notImporting=This photo is already in the catalogue with different parameters."
"$$$/AgImportFromCatalog/Tooltip/Duplicate/settingsIdentical=This photo is already in the catalogue with the same parameters."
"$$$/AgImportFromCatalog/UnknownErrMakingTempLibrary=Unable to use the catalogue to import. An unexpected error occurred while creating a temporary working copy of the catalogue."
"$$$/AgImportFromCatalog/UpgradingForImport/Progress/Title=Upgrading the catalogue ^1"
"$$$/AgImportFromCatalogDialog/GroupBox/CatalogueContents/MultiplePhotos=Content Catalogue (^1 photos)"
"$$$/AgImportFromCatalogDialog/GroupBox/CatalogueContents/OnePhoto=Content Catalogue (1 photo)"
"$$$/AgImportFromCatalogDialog/ImportFilesAndSyncSettings=Add new photos in the catalogue without moving"
"$$$/AgImportFromCatalogDialog/MissingPhotosPanel/Note/Plural=There are ^1 missing from the current catalogue. These negative files are in the catalogue being imported."
"$$$/AgImportFromCatalogDialog/MissingPhotosPanel/Note/Singular=It lacks a photo in the current catalogue. His file is negative in the catalogue being imported."
"$$$/AgImportFromCatalogDialog/NothingToImport/Hint=All photos are updated in the current catalogue."
"$$$/AgImportFromCatalogDialog/NothingToImport/Message=The current catalogue contains nothing to import."
"$$$/AgLibrary/AlreadyInUseFileDialog/Already In Catalog=Already in the catalogue"
"$$$/AgLibrary/AlreadyInUseFileDialog/Message=The file ^[^1^] is associated with another photo of the catalogue."
"$$$/AgLibrary/AnotherLR/Error=Unable to open the Lightroom catalogue named ^[^1^], because it is open in another application."
"$$$/AgLibrary/BrowsePanel/CatalogHeader=Catalogue"
"$$$/AgLibrary/CannotRelaunchLibrary/CannotFind/Message=Lightroom does not find this catalogue."
"$$$/AgLibrary/CannotRelaunchLibrary/CannotUse/Message=Unable to launch Lightroom with this catalogue. It is on a network volume or a volume that Lightroom can not save the changes."
"$$$/AgLibrary/CannotRelaunchLibrary/CatalogLocation/Hint=The location of the catalogue is ^1."
"$$$/AgLibrary/CannotUseDB/ChooseAnother/Button=Select another catalogue"
"$$$/AgLibrary/CantDeleteFromSource/CollectionSet/Plural/Info=Try removing the photo collection of this set or remove them from Lightroom."
"$$$/AgLibrary/CantDeleteFromSource/CollectionSet/Single/Info=Try removing the photo collections located within the package or Lightroom."
"$$$/AgLibrary/CantDeleteFromSource/SmartCollection/Plural/Info=Try changing the metadata of photographs so that they no longer meet the criteria of dynamic collection or try to delete the photos from Lightroom."
"$$$/AgLibrary/CantDeleteFromSource/SmartCollection/Single/Info=Try to modify the metadata of the photo so that they no longer meet the criteria of the dynamic collection or try to delete the photo from Lightroom."
"$$$/AgLibrary/ChooseCatalog=Select Catalogue"
"$$$/AgLibrary/ChooseLibraryDialog/Create=Create a catalogue ..."
"$$$/AgLibrary/ChooseLibraryDialog/CreateNewCatalogTitle=Create a folder with a new catalogue"
"$$$/AgLibrary/ChooseLibraryDialog/IntegrityCheck=Test the integrity of this catalogue"
"$$$/AgLibrary/ChooseLibraryDialog/LibraryLocation=Select a recent catalogue to open"
"$$$/AgLibrary/ChooseLibraryDialog/MakeSelectedLibraryDefault=Always load this catalogue at startup"
"$$$/AgLibrary/ChooseLibraryDialog/NotOnNetworkOrInReadOnlyFolder/Hint=Note: Lightroom catalogues cannot be on network read-only volumes or folders."
"$$$/AgLibrary/ChooseLibraryDialog/Other=Select another catalogue ..."
"$$$/AgLibrary/ChooseLibraryDialog/Title=Adobe Photoshop Lightroom - Select a catalogue"
"$$$/AgLibrary/ClosingCatalog=Closing catalogue"
"$$$/AgLibrary/ClosingCatalogNamed=Closing the Catalogue: ^1"
"$$$/AgLibrary/CreateNotAllowedOnReadOnlyVolume/Message=Lightroom can not create a catalogue called ^[^1^] ^on the volume [^2^], because Lightroom can not save changes to this site."
"$$$/AgLibrary/DiskFull/Error=Disk ^[^1^] which contains your Lightroom catalogue is almost saturated."
"$$$/AgLibrary/DiskFullAtOpen/Error=Unable to open the Lightroom catalogue, because there is insufficient space on the hard disk named ^[^1^]."
"$$$/AgLibrary/ExceededMaximumPreviewPath/Message=Lightroom can not create or open the catalogue called ^[^1^] on the volume ^[^2^], because the paths to the cache of the thumbnail would exceed the maximum size allowed for your platform ."
"$$$/AgLibrary/ExceptionRunningValidationSequence/ChooseAnother/Button=Select another catalogue"
"$$$/AgLibrary/ExceptionRunningValidationSequence/Message=Unable to open the catalogue due to an unexpected error."
"$$$/AgLibrary/ExceptionRunningValidationSequence/Title=Unexpected error when opening the catalogue."
"$$$/AgLibrary/FailedToCreateNewCatalog/Message=Lightroom was unable to initialize the catalogue called ^[^1^] and needs to close."
"$$$/AgLibrary/FailedToOpenNewCatalog/Message=Lightroom was unable to open catalogue called ^[^1^] and needs to close."
"$$$/AgLibrary/FolderView/DeleteFolder/Hint=If you continue, these photos will be removed from Lightroom, but the folder and files remain on disk."
"$$$/AgLibrary/FolderView/DeleteFolders/Hint/Plural=If you continue, these photos will be removed from Lightroom, but all the folders and files remain on disk."
"$$$/AgLibrary/FolderView/DeleteFolders/Hint/Single=If you continue, this photo will be removed from Lightroom, but all the folders and files remain on disk."
"$$$/AgLibrary/FolderView/ExportAsCatalog/Folder=Export this file as a catalogue ..."
"$$$/AgLibrary/FolderView/MoveFolder/CantMoveDatabaseFolder=The folder named ^[^1^] contains the Lightroom catalogue and can not be moved until the application is running."
"$$$/AgLibrary/FolderView/PromoteSubfolders/RootHint=If you continue, all the files in the root folder will be removed from Lightroom, but the folder and files remain on disk."
"$$$/AgLibrary/IncompatibleDB/TooNewDB/Error=Unable to open the Lightroom catalogue named ^[^1^] because it is too recent to be used with the current version of Lightroom. Would you select another catalogue?"
"$$$/AgLibrary/IncompatibleDB/TooOldDB/Error=Unable to open the Lightroom catalogue named ^[^1^] because his version is too old. Would you select another catalogue?"
"$$$/AgLibrary/IncompatibleDB/TooOldDB/Hint=The catalogue was created by a beta version of Lightroom that does not support upgrades catalogue."
"$$$/AgLibrary/IncompatibleDB/UnknownDB/Error=Unable to open the Lightroom catalogue named ^[^1^] because it is invalid. Would you select another catalogue?"
"$$$/AgLibrary/IncompatibleDB/UnknownDB/Hint=The catalogue is not recognized as a valid catalogue.^n^nThe catalogue is on ^1."
"$$$/AgLibrary/LibraryInfo/Title=Settings Catalogue"
"$$$/AgLibrary/LibraryMissingDialog/Button/CreateNew=Create a default catalogue"
"$$$/AgLibrary/LibraryMissingDialog/Button/UseDefault=Use the default catalogue"
"$$$/AgLibrary/LibraryMissingDialog/CreateNewOrLocateExisting/Message=Can not find the catalogue on the site (^1). Want to find an existing catalogue or create one?"
"$$$/AgLibrary/LibraryMissingDialog/Title=Lightroom found."
"$$$/AgLibrary/LibraryMissingDialog/UseDefaultOrLocateExisting/Message=Can not find the catalogue on the site (^1). Want to find an existing catalogue, or use a default?"
"$$$/AgLibrary/Menu/File/BackupCatalog=Save &catalogue ..."
"$$$/AgLibrary/Menu/File/ExportAsCatalog=E&xport as a catalogue ..."
"$$$/AgLibrary/Menu/File/ImportToCatalog=Impo&rting from the catalogue ..."
"$$$/AgLibrary/Menu/File/NewCatalog=New &catalogue ..."
"$$$/AgLibrary/Menu/File/OpenCatalog=Open &catalogue ..."
"$$$/AgLibrary/Menu/File/OptimizeCatalog=Otimize &catalogue ..."
"$$$/AgLibrary/Menu/File/UpgradeFromElements=Upgrade Photoshop Elements catalogue ..."
"$$$/AgLibrary/Menu/ImageContext/RemoveFromLibrary=Deleted &Sea Catalogue"
"$$$/AgLibrary/Menu/Library/RemovePhoto=Delete the photo and the sea Catalogue"
"$$$/AgLibrary/Menu/Panels/Library=&Catalogue"
"$$$/AgLibrary/MustCheckDBDueToCrash/Error=During the last execution of Lightroom, a stop unforeseeable occurred due to a problem reading the catalogue. Lightroom must now check the catalogue before continuing."
"$$$/AgLibrary/NetworkFolderNotAllowedForCreate/Message=Lightroom can not create a catalogue called ^[^1^] on the network volume ^[^2^]."
"$$$/AgLibrary/NetworkFolderNotAllowedForOpen/Message=Lightroom can not open the catalogue called ^[^1^] on the network volume ^[^2^]."
"$$$/AgLibrary/OpenCatalog/Title=Open Catalogue"
"$$$/AgLibrary/OpeningCatalog=Opening Catalogue"
"$$$/AgLibrary/OpeningCatalogNamed=Opening the catalogue: ^1"
"$$$/AgLibrary/Ops/Keywords/ExportAsCatalog=Export as Catalogue"
"$$$/AgLibrary/Panel/ExportCatalogButtonTitle=Export Catalogue"
"$$$/AgLibrary/Panel/ImportCatalog=Import catalogue"
"$$$/AgLibrary/PathLengthHit/Hint=The full path to the catalogue, including the name and separators cannot contain more than ^1 characters. The specified path contains ^2 characters."
"$$$/AgLibrary/ReadOnlyCatalog/Error=Lightroom can not use the catalogue named ^[^1^], because it is not recordable and can not be opened."
"$$$/AgLibrary/ReadOnlyCatalog/Hint=The permissions are probably inadequate or another application uses the Lightroom catalogue. Try to solve the problem or select another catalogue."
"$$$/AgLibrary/ReadOnlyFolder/Error=The Lightroom catalogue can not be used because the parent folder ^[^1^] does not allow creation of files."
"$$$/AgLibrary/ReadOnlyFolder/Hint=Change the access rights to the file before proceeding or select another catalogue."
"$$$/AgLibrary/ReadOnlyNotAllowedForCreate/Message=Lightroom can not create a catalogue called ^[^1^] on the volume ^[^2^], because Lightroom can not save changes to this site."
"$$$/AgLibrary/ReadOnlyNotAllowedForOpen/Message=Lightroom can not open the catalogue called ^[^1^] on the volume ^[^2^], because Lightroom can not save changes to this site."
"$$$/AgLibrary/RecoveringFromHotJournal/Message=The catalogue called ^[^1^] has been left in poor condition. Lightroom must restore the catalogue before continuing."
"$$$/AgLibrary/RecoveringFromHotJournal/Title=Restoration Catalogue"
"$$$/AgLibrary/RelaunchForLibraryDialog/Info=To use this catalogue, Lightroom must close the current catalogue and restart. Want to restart Lightroom with ^1?"
"$$$/AgLibrary/RelaunchForLibraryDialog/Message=Restart Lightroom with this catalogue?"
"$$$/AgLibrary/RelaunchForLibraryDialog/Title=Open Catalogue"
"$$$/AgLibrary/SyncFolder/DeleteMissingPhotos/Count=Remove missing photos from catalogue (^1)"
"$$$/AgLibrary/SyncFolder/DeleteMissingPhotos/Unknown=Remove missing photos from catalogue (comptage. ..)"
"$$$/AgLibrary/Updates/UpdatingLibraryFileFormat=Updating the file format of the catalogue"
"$$$/AgLibrary/XMP/WarningDialog/Info=This replaces the metadata with those of the Lightroom catalogue file. It is not irreversible."
"$$$/AgLibraryCollection/Collection/ExportAsCatalog=Export this collection as a catalogue ..."
"$$$/AgLibraryCollection/PublishedCollection/ExportAsCatalog=Export this collection published as a catalogue ..."
"$$$/AgLibraryTagKinds/ExportAsCatalog/KeywordContents=Export these pictures as catalogue ..."
"$$$/AgLibraryTagKinds/LibraryBrowsePanel/TagName/PreviousCatalogExport=Export as Previous Catalogue"
"$$$/AgLicenseDialog/OrganizationCodes/kEpicOrgCatalogPublisher=Publisher catalogues"
"$$$/AgNamingUI/ErrorDialog/RemovedFromCatalog=The attached file has been removed from your catalogue."
"$$$/AgNamingUI/ErrorDialog/RemovedFromCatalogPlural=These support files have been removed from your catalogue."
"$$$/AgPreferences/CatalogInfoDescription=Some parameters depend on the catalogue and are modified in the Settings window of the catalogue."
"$$$/AgPreferences/CatalogSettingsSection=Settings Catalogue"
"$$$/AgPreferences/DefaultLibrary/AlwaysPrompt=Always display the prompt start of Lightroom catalogue. Hold down the Option key during startup to move the prompt and load the latest catalogue."
"$$$/AgPreferences/DefaultLibrary/LoadMostRecentLibrary=Load the most recent catalogue"
"$$$/AgPreferences/DefaultLibrary/UseMostRecentDescription=Always use the latest catalogue used in Lightroom. Hold down the Option key during startup to select another catalogue."
"$$$/AgPreferences/DefaultLibrary/UseMostRecentDescriptionWin=Always use the latest catalogue used in Lightroom. Hold down the Control key while booting to select another catalogue."
"$$$/AgPreferences/DefaultLibrary/UseSelected=Always use the selected catalogue. Hold down the Option key during startup to load temporarily another catalogue."
"$$$/AgPreferences/DefaultLibrary/UseSelectedWin=Always use the selected catalogue. Hold down the Control key while booting to temporarily load another catalogue."
"$$$/AgPreferences/General/Label/LibraryStartup=Default Catalogue"
"$$$/AgPreferences/GoToCatalogInfoButton=Go to Settings Catalogue"
"$$$/AgPreferences/PresetsSection/StorePresetsByCatalog=Store presets with catalogue"
"$$$/AgPreferences/defaultLibrary=At startup, load the catalogue:"
"$$$/AgPublishCommands/RemoteDeleteFailed/Info/Plural=You can still remove the collections of the Lightroom catalogue, but they may remain on the service."
"$$$/AgPublishCommands/RemoteDeleteFailed/Info/Single=You can still remove this collection's catalogue Lightroom but it may remain on the service."
"$$$/AgSQLiteExceptionHandlers/CorruptDBError/Message=Lightroom has encountered an error while reading a catalogue file and needs to close."
"$$$/AgSdkPropertySpecs/Error/SchemaTooNew/V3=Metadata specific to plug this catalogue are newer than those supported by the installed version of this plugin."
"$$$/Application/Menu/File/LibraryInfo=Catalogue ue &Settings ..."
"$$$/Application/SystemMenu/ShowCatalogLocation=Show lacement emp &Catalogue ..."
"$$$/BackUpLibrary/BackingUpDBFile/Failed/Message=We're sorry. Lightroom was unable to save the catalogue ^[^1^]."
"$$$/BackUpLibrary/BackingUpDBFile/FailedBecauseCorrupt/Hint=Lightroom will try to repair the catalogue at the next opening."
"$$$/BackUpLibrary/BackingUpDBFile/FailedBecauseCorrupt/Message=We're sorry. The catalogue called ^[^1^] has failed the integrity test requested and can not be saved."
"$$$/BackUpLibrary/BackingUpDBFile/Title=Catalogue backup"
"$$$/BackupLibraryDialog/BackUpLibraryTitle=Save catalogue"
"$$$/BackupLibraryDialog/DailyPeriodicityComment=The catalogue settings ^[^1^] indicate that it must be saved once a day."
"$$$/BackupLibraryDialog/EveryLaunchPeriodicityComment=The catalogue settings ^[^1^] indicate that it must be saved at each closing."
"$$$/BackupLibraryDialog/MonthlyPeriodicityComment=The catalogue settings ^[^1^] indicate that it must be backed up once a month."
"$$$/BackupLibraryDialog/Note=Note: This will backup only the catalogue file, not the pictures it references."
"$$$/BackupLibraryDialog/Optimize/Checkbox=Optimizing the catalogue after the backup"
"$$$/BackupLibraryDialog/ThisLaunchPeriodicityComment=The catalogue settings ^[^1^] indicate that it must be backed up during the next closure."
"$$$/BackupLibraryDialog/WeeklyPeriodicityComment=The catalogue settings ^[^1^] indicate that it must be backed up once a week."
"$$$/FirstRunUpgrade/CatalogLabel/LR1=Upgrading the Lightroom catalogue called a ^[^1^]"
"$$$/FirstRunUpgrade/CatalogLabel/PSE7=Upgrade the catalogue called Photoshop Elements 7 ^[^1^]"
"$$$/FirstRunUpgrade/CatalogLabel/PSE8=Upgrade Photoshop Elements catalogue titled 8 ^[^1^]"
"$$$/FirstRunUpgrade/CatalogLabel/PSEGeneric=Upgrade Photoshop Elements catalogue entitled ^[^1^]."
"$$$/FirstRunUpgrade/Destination/ChoiceBox/Label=Destination of the new catalogue"
"$$$/FirstRunUpgrade/Explanation/Multiple/UpgradeableCatalogs/Message=3 Lightroom catalogues found compatible on your computer. Would you like to upgrade an existing catalogue or create a new catalogue with Lightroom?"
"$$$/FirstRunUpgrade/Other=Select another catalogue ..."
"$$$/FirstRunUpgrade/UpgradeNeeded/CreateNew/Title=Creating a Lightroom 3."
"$$$/FirstRunUpgrade/UpgradeNeeded/Title=Creating a Lightroom"
"$$$/Import/Header/MyCatalog=My catalogue"
"$$$/ImportToolbar/AlreadyInCatalog=This photo is already in the catalogue."
"$$$/ImportView/FilePlacement/LeaveDescription=Add photos to catalogue without moving"
"$$$/ImportView/Tooltip/SuspectedDuplicate=It is apparently a duplicate of a photo already in the catalogue."
"$$$/KeywordImportExport/ImportFromCatalog/ModalProgress/Title=Import keywords from the catalogue"
"$$$/KeywordImportExport/ImportFromCatalog/Preparing=Preparing to import keywords from the catalogue"
"$$$/Library/FindMissingPhotos/NoneFoundMessage=All photos in this catalogue are available."
"$$$/Library/FindMissingPhotos/ProgressScope/Paths=Getting the paths of Catalogue"
"$$$/Library/FindPreviousProcessVersionPhotos/NoneFoundMessage=No picture with a previous process in the most recent was found in this catalogue."
"$$$/Library/FindPreviousProcessVersionPhotos/ProgressScope/Gathering=Taking photos of catalogue"
"$$$/LibraryUpgradeCatalogUtils/CatalogInfo/DisclosureWidget/Label=Information Catalogueue"
"$$$/LrCatalog/ProlongedWriteConfirmation/Message=The plug-^[^1^] requires write access rights to your catalogue."
"$$$/LrCatalog/ProlongedWriteConfirmation/Proceed=Continue"
"$$$/MustUpgradeBeforeImport/DiscardUpgradedCopy/Choice/Label=Skip catalogue upgraded after import"
"$$$/MustUpgradeBeforeImport/Failure/Hint=You can choose to try to upgrade the catalogue directly by opening it in Lightroom 3."
"$$$/MustUpgradeBeforeImport/Failure/Message=We're sorry. Lightroom has failed to upgrade the catalogue file ^[^1^]. Imports from that file is impossible."
"$$$/MustUpgradeBeforeImport/KeepUpgradedCopy/Choice/Label=Save the catalogue upgrade."
"$$$/MustUpgradeBeforeImport/Success/Message=Lightroom has completed the upgrade of the catalogue file ^[^1^] and will start importing the catalogue."
"$$$/MustUpgradeBeforeImport/UpdateNeeded/Description=Lightroom will upgrade the catalogue in the background, then continue the import after the upgrade."
"$$$/MustUpgradeBeforeImport/UpdateNeeded/LargeSizeWarning/Description=Lightroom will upgrade the catalogue in the background, then continue the import after the upgrade. This may take several minutes."
"$$$/MustUpgradeBeforeImport/UpdateNeeded/Message=The catalogue file ^[^1^] selected must be upgraded before being imported into Lightroom 3."
"$$$/MustUpgradeBeforeImport/UpgradeNeeded/Title=The catalogue must be upgraded"
"$$$/PSE6UpgradeCatalogUI/Failure/Message=Lightroom has encountered problems during the upgrade of Photoshop Elements catalogue. Unable to complete this operation."
"$$$/PSEUpgradeCatalogUI/Explanation/Details=Lightroom will reboot, then create a catalogue in the destination indicated below."
"$$$/PSEUpgradeCatalogUI/Explanation/Message=Want to upgrade a catalogue Photoshop Elements for use in Lightroom?"
"$$$/PSEUpgradeCatalogUI/PSECatalog/CatalogChooser=Photoshop Elements Catalogue"
"$$$/PSEUpgradeCatalogUI/UpgradeNeeded/Title=Upgrade Photoshop Elements catalogue"
"$$$/PrefsWindow/BackUpLibrary=Save the catalogue:"
"$$$/UpgradeCatalog/Progress/Message=Upgrading the current catalogue"
"$$$/UpgradeCatalog/Progress/Title=Update Catalogue"
"$$$/UpgradeCatalog/RecoverablePartialUpgrade/Button/TryAgain/Button=Retry the upgrade catalogue"
"$$$/UpgradeCatalog/RecoverablePartialUpgrade/Hint=This problem is certainly due to the sudden closure of Lightroom during the upgrade of an old catalogue on Lightroom ^[^1^]."
"$$$/UpgradeCatalog/RecoverablePartialUpgrade/Message=The catalogue is being opened an incomplete upgrade of an old Lightroom and can not be used. What do you do?"
"$$$/UpgradeCatalog/UnrecoverablePartialUpgrade/Button/TryAgain/Button=Delete the catalogue and select another"
"$$$/UpgradeCatalog/UnrecoverablePartialUpgrade/ChooseAnother/Button=Keep the catalogue and select another"
"$$$/UpgradeCatalog/UnrecoverablePartialUpgrade/Message=The catalogue is being opened an incomplete upgrade of an old Lightroom catalogue and can not be used. What do you do?"
"$$$/UpgradeCatalog/UpgradeCatalog/ChooseAnother/Button=Select another catalogue"
"$$$/UpgradeCatalogUI/BadDestination/FileExists/Message=Lightroom can not do upgrade to this location because a file by this name already in the same place. Select another catalogue name or other destination catalogue."
"$$$/UpgradeCatalogUI/BadDestination/ParentFolderMissing/Message=Lightroom can not do upgrade to this location because the file does not exist. Choose a different destination folder for your catalogue."
"$$$/UpgradeCatalogUI/BadDestination/PreviewCacheExists/Message=Lightroom can not do upgrade to this location as a preview file uses the same name. Choose a different catalogue name or other destination catalogue."
"$$$/UpgradeCatalogUI/CannotMovePreviewCache/Lightroom=The location selected is on a volume different from the original catalogue. Lightroom does not support copying files between volumes preview through the upgrade of the catalogue."
"$$$/UpgradeCatalogUI/NetworkDestination/NotAllowed/Hint=The upgrade of Lightroom catalogues can not be made to locations on network volumes, removable media or volumes read-only."
"$$$/UpgradeCatalogUI/PreviewCopyingFailed/Hint=The previews will be recreated as you use the catalogue."
"$$$/UpgradeCatalogUI/ReadOnlyDestination/NotAllowed/Hint=The upgrade of Lightroom catalogues can not be made to locations on network volumes, removable media or volumes read-only. Critical"
"$$$/UpgradeCatalogUI/UpdateFailed/GenericFailure/Message=Lightroom has encountered problems when updating the file format of the catalogue. This catalogue can be used in this version of Lightroom."
"$$$/UpgradeCatalogUI/UpdateFailed/IOError/Message=Lightroom has encountered problems reading or writing to disk when trying to update the catalogue file format and can not currently update the catalogue."
"$$$/UpgradeCatalogUI/UpdateNeeded/ChooseAnother/Button=Select another catalogue"
"$$$/UpgradeCatalogUI/UpdateNeeded/Description=Lightroom will create a new catalogue file to the destination indicated below. The surveys will also be moved to that location and converted for use in Lightroom 3."
"$$$/UpgradeCatalogUI/UpdateNeeded/Message=Upgrade the catalogue file ^[^1^] for use in Lightroom 3."
"$$$/UpgradePSECatalog/OfflineImagesNotUpgraded/MultiplePhotosUpgraded/MultiplePhotosOffli ne/Message=Lightroom was able to update only ^1 photos in a Photoshop Elements catalogue, as ^2 additional pictures have been moved to an inaccessible Photoshop Elements catalogue.
"$$$/UpgradePSECatalog/OfflineImagesNotUpgraded/MultiplePhotosUpgraded/SinglePhotoOffline/ Message=Lightroom has successfully updated ^1 photos in a Photoshop Elements catalogue, but was unable to update others because it has been moved to an inaccessible Photoshop Elements catalogue.
"$$$/UpgradePSECatalog/OfflineImagesNotUpgraded/SinglePhotoUpgraded/MultiplePhotosOffline/ Message=Lightroom has successfully updated ^1 photos in a Photoshop Elements catalogue, but was unable to update others because it has been moved to an inaccessible Photoshop Elements catalogue.
"$$$/UpgradePSECatalog/OfflineImagesNotUpgraded/SinglePhotoUpgraded/SinglePhotoOffline/Mes sage=Lightroom has successfully updated a photo in a Photoshop Elements catalogue, but was unable to update other because it has been moved to a backup of Photoshop Elements which can not be accessed.
"$$$/UpgradePSECatalog/Progress/Hint=Wait for the creation of your Lightroom catalogue."
"$$$/UpgradePSECatalog/Progress/Message=Creating a Lightroom catalogue from Elements catalogue."
"$$$/UpgradePSECatalog/SomeImagesNotUpgraded/Message=Lightroom upgraded your Photoshop Elements catalogue. ^1 pictures were added to Lightroom, but ^2 files were in a format not supported by Lightroom. You can continue to view these files in Photoshop Elements."
"$$$/UpgradeRedundancyWarning/ImportCurrent/Button=Import the current catalogue"
"$$$/UpgradeRedundancyWarning/ImportUpgraded/Button=Import the catalogue upgraded"
"$$$/UpgradeRedundancyWarning/ImportUpgraded/Message=Lightroom 3 has already upgraded the selected catalogue."
"$$$/UpgradeRedundancyWarning/ImportUpgraded/Prompt=Want to import from the catalogue upgraded?"
"$$$/UpgradeRedundancyWarning/OriginalCatalog/Title=Selected Catalogue:"
"$$$/UpgradeRedundancyWarning/Title=Upgraded version of the catalogue found"
"$$$/UpgradeRedundancyWarning/UpgradedCatalog/Title=Catalogue upgraded:"
"$$$/UpgradeRedundancyWarning/UseUpgraded/Button=Using the existing catalogue"
"$$$/UpgradeRedundancyWarning/UseUpgraded/Message=Lightroom 3 has already upgraded the selected catalogue." -
I was running LR2 on a vista machine and everything was working great.
I moved over to WIN7 32 bit re installed/updates for PC and LR everything was fine until i came to export!
All files are located on internal drives, no problems with missing files etc but say for example: i wanted to export 400 files to a new folder jpeg/resize/ rename, it continues to miss files in the output folder leaving empty files(renamed) and reporting (photos that failed to export) it might be 30 files or 200, there is no pattern at all.I have tried it with the existing file name/no resizing and different combinations of all the options but istill happens.
I have just moved again to WIN7 64 bit and the same thing is happening , im running a AMD Quad core with 4GB ram (same machine)
Any help would be great as i need to batch rename for clients wedding photos and its driving me mad, i am having to do it in another program and this is not how it should be.
Kind regards
PhilJeff.
Yes its not my most favored program at the moment, the catalogue had priviously been optimized and all the filters are definitely off but it still does it.
I had a poor work around which was to export the files i wanted in a file with there original filename and keep over writing the empty files until they were all in there, then send them to a program that did actually work and rename etc in there, not practical but worked.
The group of files that has really hacked me off is a wedding done 3 weeks ago with a friend, my 2 Canon cameras were synced and her Nikon was way off! by 1 year and 1 hour so this was just the start of all my problems, i changed all the file times and dates so they were in the correct order within LR but when i came to export i was screwed! I could not mass export/rename etc as it misses multiple files and i could not use my work around method as the whole group of Nikon files would come before mine(due to the file names). The client kept asking about the pictures so i had to sit there and actually rename and export 5-10 files at a time!! and it still would miss the occasional file......The 440 files took hours, but i had to do it!
Thank you for your input be unfortunatly no its nackered some how. -
I installed Elements 11 and immediately after opening (I can see my pictures) it closes. Same thing started happening with Elements 9 which is why I upgraded.
I was the one having similar problems to yours and have finally got PSE11 working. I had another thread started yesterday regarding the inability to show photos. I was only getting the hourglass symbol as well. It turns out the problem was due to a corrupted thumbnail cache. The solution was to open the Catalogue Manager and then go to repair the catalogue. I also optimized the catalogue and after doing so, all of the thumbnails displayed. I then closed PSE11 and on reopening the program, my photos are displayed in the organizer. Hope this helps.
-
Hi,
I am trying to run a long running process, by redirecting to the LongRunningView using the code below. But its throwing exception Can anyone please help
string strCurrentUrl = SPUtility.OriginalServerRelativeRequestPath;
strCurrentUrl = strCurrentUrl + "?ListName=" + strListName;
////Initiates the Excel Import
if (ObjdtExcel != null && ObjdtExcel.Rows.Count > 0)
ExcelImportJob objJob = new ExcelImportJob(strTabName, ObjdtExcel, strFileExt, SPContext.Current.Site.ID, SPContext.Current.Web.ID, strWorkflow, strListName);
objJob.Title = "Excel Import Job";
//// Redirect the user to another page when finished.
objJob.RedirectWhenFinished = false;
//// Specify if the user can cancel this.
objJob.UserCanCancel = false;
//// Specify the refresh rate of the job, here, the page polls every 5 seconds for completion.
objJob.MillisecondsToWaitForFinish = 15000;
//// Finally, start the job on a web.
objJob.Start(SPContext.Current.Web);
string strUrl = string.Format("{0}?JobId={1}&Source={2}", PROGRESS_PAGE_URL, objJob.JobId, strCurrentUrl);
SPUtility.Redirect(strUrl, SPRedirectFlags.Default, HttpContext.Current);
The exception being "Unable to evaluate expression because the code is optimized or a native frame is on top of the call stack."
Arjun Menon U.KHi Arjun,
Any update?
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
Unable to access my LR catalogue...
Hi, I am trying to access my LR catalogue but get: "The Lightroom catalog named “Lightroom 3 Catalog” cannot be opened because another application already has it opened". As far as I know, there is no other application open. I am therefore unable to access my 30.000 odd photos...
I have been using LR 3.6 for the past 3 years and am a full time photographer. I have been to my Apple store to try and sort this problem - they have replaced both Lacie ext HD which hold and back up my catalogue but are unable to do anything more. I have been redirected to Adobe.Go to the folder where your catalog is located. As well as the large catalog file, Lightroom 3 Catalog.lrcat, there will also be a small file named Lightroom 3 Catalog.lrcat.lock. The .lock file is created every time LR is launched and deleted when it is properly closed and its purpose is to prevent two instances of the catalog being open simultaneously. However, if the computer crashes or is force closed the .lock file remains there and prevents LR from being launched. Delete the .lock file and LR should open normally, but be careful not to delete the catalog file.
-
Unable to upgrade a LR1 or an LR2 Catalogue in LR3 or LR4
Unable to upgrade a LR1 or an LR2 Catalogue in LR3 or LR4. Both LR3 and LR4 try to upgrade the LR1/LR2 Catalogs but then give an error message saying it is unable to upgrade the catalog just before opening. Can anyone help? I'm using all updated versions....
Problem solved
There maybe a problem upgrading a catalogue from PowerPC to an Intel. I finally mangaged to open my (PowerPC) LR1 catalog in (Intel) LR4 by installing the trial version of LR2 on the Intel, opening the LR1 catalog in LR2, and then opening the new LR2 catalog in LR4 which will then upgrade it. Problem solved.
LR2 can be downloaded here:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4672&fileID=4372 -
iBooks opens but not on the catalogue page whereby I can open my books ab read way I have purchased ?
Hi Nitish,
Thanks for your reply. Infact I only coded the event handler. In the first line, I am reading the entity from the collection wrapper of the context node. If it is bound, only then I can set it in EDIT mode.
ob_entity ?= me->typed_context->notes->collection_wrapper->get_current( ).
IF ob_entity IS BOUND.
Sets the view in EDIT mode
Now, ob_entity is null if there is initially no data in the notes section of the confirmed account. However, if notes is not empty, then, ob_entity is bound and I can set the view to edit mode. This is the issue.
Regards,
Naren -
Unable to delete request from write-optimized DSO (Error during rollback)
Hi Gurus,
I am trying to delete a delta request from a Write-Optimized DSO. This request was uploaded with a DTP from another Write-optimized DSO.
The actual overall status of the request is RED and the description of that status is now: 'Error during rollback of request DTPR_4JW6NLSVDUNYY3GTD6F4DQJWR; only rollback allowed'.
I checked the log of all Request Operations in DataStore (from the same line where the red request is now) and I see my several attemps to delete this request under a RED radiobutton with the title Rollback. The details for this error are the following:
Could not delete request data from active table
Message no. RSODSO_ROLLBACK114
Diagnosis
The system could not delete the request data from the active table of a write-optimized DataStore object.
System Response
Write-optimized DataStore object: DTFISO02
Active table: /BIC/ADTFISO0200
Request: DTPR_4JW6NLSVDUNYY3GTD6F4DQJWR
Procedure
Search for Notes containing the key words "Delete write-optimized DSO PSA"
I am relatively new to SAP BI 7.0 and I do not know how to delete this request. Any help will be highly appreciated !!
LeticiaHi Leticia:
Take a look at the SAP Notes below.
Note 1111065 - "701: Delta consistency check for write-optimized DSOs"
Note 1263877 - "70SP20: Delta consistency check for write-optimized DSOs"
Note 1125025 - "P17:PSA:DSO:ODSR missing in PSA process for write-opt. DSO"
Additionally, some ideas from the alternative presented on the blog by KMR might help you.
"How to generate a selective deletion program for info provider"
Regards,
Francisco Mílán. -
Unable to delete data target contents of Write-Optimized DSO in Process Chain
Hi Experts,
We are using SAP Net Weaver BW 7.01 version and we need to delete the entire data target contents of Write-Optimized DSO in the process chain before the next data load.
I included this step in process chain but still it is failing with errore message"Message not found (in main memory), Drop Cube Failed In Data Target"
This process type is working during BW 7.0 version but not in BW 7.01 version.
However i found that we can use the program RSSM_DELETE_WO_DSO_REQUESTS to delete old requests in the Write-Optimized DSO for BW 7.01 SP07 as per SAP Note 1437407 but still it's not working even after implementing this program as the Prerequisite to delete the request is the data mart status should be updated where it is not happening for the program.
We had an process type option to 'delete the requests from Write-Optimized DSO' directly in BW 7.3 but still not available in 7.01 version.
Could you please suggest me on how to resolve this issue in BW 7.01?
Many thanks for your help in advance.
Regards,
MadhuCreate ABAP program as attached code.
Then you can use that ABAP program in process chains through ABAP variant
ABAP varaint should have following properties
Select call mode as Synchronous; call from Local; and Program
Give your ABAP program name in "program name" and create one program variant for each write optimized DSO.
Please refer how to use ABAP program in process chains for further details.
Hope this helps -
Unable to open LR4 catalogue after attempting to install LR cc on mac os 10.6.8
Hi - I made a mistake and attempted to install LRcc on mac os 10.6.8. I now understand that this in not supported. Now, when I go back to LR 4, it will open some catalogues, but not the one with the most work in it. Naturally, I have done quite a bit of work since my most recent backup. Any help appreciated.
Victoria,
Thanks for your reply. It was set to open with LR4.4. Then I tried again to open to show you the error message and it worked fine. I have no idea what I did other than go to yoga.
Regards,
Don57 -
Lightroom V3 unable to import catalogue due to unknown error
Mac OS X 10.6.4
I have Lightroom V2.6 and V3 beta 2. I have just purchased Lightroom V3 upgrade.
I installed Lightroon V3 and upon first start up imported my V2 catalogue (only one catalogue on V2 exists) - this has worked fine.
I also have a single catalogue on V3 beta 2 that I need to import.
V3 began importing Lightroom catalogue V3 (beta 2) but stopped with the following message:
Lightroom could not import this catalogue because of an unknown error.
I understand from trawling these forums that Lightroom V3 may have a bug in relation to importing duplicate files from previous catalogues but in my case I cannot see any files or folders that have been imported from Lightroom V3 beta 2 - the majority of the folders or files catalogued in V3 beta 2 have never been catalogued in Lightroom V2.
Any ideas for a fix?It'sa bug. Duplicate folders prevent the import. You'll have to wait for 3.1 along with the rest of us.
The folks at Adobe know about it, but you can file a bug report if you wsh. -
When I click on the items in the folder i receive the message "no media to display". The images are in the hard drive. I tried to download previously imported images, clicked "get media" and got the "nothing imported... the files are already in this catalogue" message. I then took a new photograph, downloaded it to the organiser and it appeared in the Folders List - clicked on the item and again got "no media to display" . Help would be appreciated.
Hi,
That sounds as though you have a filter applied - perhaps a star rating search.
On the View menu select Media Types and ensure that all are checked. Also under the View menu select Hidden Files and ensure Show All Files is checked.
If that doesn't display your files, see if there is a All Media button at the top - click on that and then your folder.
If still no success, try closing the organizer and opening it again.
Brian -
Unable to restore catalogue to PSE 7 or 8
I have been through all the Photoshop Elements from Photoshop Album - all have been successful -until now! I recently clean installed Windows 7 Ultimate on my PC and installed PSE8. I restored a backup from an external hard disc (from a previously backup PSE7 backed up from Vista previously) which worked for some days and suddenly announced that the catalogue was corrupt and stopped working. I reinstalled PSE 8 and attempted the restoration again a number of times with no success. The photos are restored to the hard disc but not to the Organiser which otherwise seems to work normally except it says: "the watch folder service is unavailable". I also installed PSE7 on my PC but it will not restore from the PSE7 backup.
I have PSE6 on a laptop working normally and backed it up to a hard disc and attempted a restoration to PSE7 on my PC. It finishes with: "Restoration successful" followed by: "Conversion operation failed". I feel that the information is safe on the external hard disc but how do I transfer it to my PC?
I would be grateful for assistance.function(){return A.apply(null,[this].concat($A(arguments)))}
I reinstalled PSE 8 and attempted the restoration again a number of times with no success. The photos are restored to the hard disc but not to the Organiser which otherwise seems to work normally except it says: "the watch folder service is unavailable". I also installed PSE7 on my PC but it will not restore from the PSE7 backup.
To simplify the troubleshooting, I recommend uninstalling PSE 8, reinstalling PSE 7, and focusing on getting PSE 7 to restore the PSE 7 backup. Then when you get that working, you can reinstall PSE 8 and convert your catalog.
After uninstalling PSE 8 and reinstalling PSE 7, if the restore still doesn't work, post back here with more precise details about the issue: the location of the backup, the precise command and options you gave to restore, any error messages, the symptoms in the Organizer. -
Unable to open my LR4 Catalogue suddenly! Help!
This is the popup I get:
Lightroom cannot use the catalog named
“Lightroom 4 Catalog” because it is not
writable and cannot be opened.
This could be caused by incorrect permissions or because
another Lightroom application is using the catalog. You
may try to correct the problem or you may select a different catalog.
Choose a DifferentCatalog | Try Again | Exit
Any idea how I can return to my life as it used to be ?Made it ot work for now, but still need to resolve how to open a catalog from an external HDD.
Noticed, that all catalogs stopped working, including LR3. Consistent behaviour (failure) accross all HDDs (backups).
Copied the Catalog to desktop, opened it, and it worked fine!
I guess the issue is then with Win7 behviour. The error message gives clue: "incorrect permissions" - now I have no idea how to get aroud this. I use a simple home group LAN. The Drive is connected directly over USB to the system. Anyone who knows how to come around this permission thing in win7 will be really helpful.
- Nikhil
Maybe you are looking for
-
Can I put other data on my Time Machine FW drive as long as I don't poot it in the TM backups folder?
-
Integrating a Flex + LiveCycle Data Services 2.5 app in the Workspace UI
Hi, We're building a crud app that needs to be integrated in a customised workspace UI application. I'm thinking of adding a Tab and having a moduleloader pull a Flex SWF module in that's compiled with the data-management-config.xml and context info
-
I'm using iphoto 09, and suddenly, no maps are showing up in places. In the get info section of a photo, the location name still shows up, but there are no maps, no pins for the maps, etc. Anyone have any idea? The map area just shows up blank. T
-
I have CS6 Design & Web Premium, would like to switch from PC to Mac. Can I do this for free?
I have CS6 Design & Web Premium, would like to switch from PC to Mac. Does anyone know if it's possible to do this for free? I have no interest in upgrading to CC.
-
Detail business flow for sd and mm
any body have the business flow for the sd and mm . please give me the link............if other modules also these ple pass the link ......