Map not showing in places

I'm using iphoto 09, and suddenly, no maps are showing up in places.   In the get info section of a photo, the location name still shows up, but there are no maps, no pins for the maps, etc.  Anyone have any idea?  The map area just shows up blank.
Thanks

Hi, I’ve found a similar topic with some advice. However, none of them has solved my problem with iPhoto ’09. My brother hasn’t got such problem in iPhoto ’11 on his Mac but I’ll wait for WWDC news before I decide to upgrade to ’11. Maybe our problem is related to the new stuff which is probably being tested now?

Similar Messages

  • Ovi Map not showing railway lines on N8 (UK map)

    Hi
    I've recently purchased a N8, and I was suprised to see the UK maps not showing the railway lines. However if I scoll across to Germany for example, the lines are clearly shown.
    They used to show up on my 5800 and show up on the Ovi maps website, so why no lines on the N8? Or is it just an issue with my device?
    Can any other N8 users with Ovi Maps v3.06 confirm whether they show the rail lines in the UK please.
    Any suggestions? I've tried re-installing Ovi Maps and re-downloading the maps but no change.
    Thanks.
    Regards, Brian.
    Solved!
    Go to Solution.

    What version of the map data do you have as my N8 with 0.2.42.122 shows railway lines eg in Birmingham in the attached image.  I have looked in a few places where I know lines run and all have been there, but it is possible that some have been missed.
    N8-00 pc059C9F6 Belle
    808 PureView pc059P6W5
    Attachments:
    Scr000087.jpg ‏46 KB

  • Map not showing

    Map not showing  standard,hybrid and satellite only  only location drop pin is visible

    If you havn't already, i would download the latest version of the Maps application for your phone and load the latest map data using map loader.
    They can both be found from:
    http://europe.nokia.com/explore-services/maps/download
    with maploader make sure you delete the older map data before loading new maps (there is a button there for this)
    Although i work for Nokia, my opinions are my own!
    Got a Maps query? Check our Maps FAQ's

  • IPhone photos not showing in places on iPad

    If I take photo on iPhone it shows ok in my iPad photostream but does not appear in places. Shows ok in places on iPhone. If I take photo on iPad it shows ok in places on iPad but not iPhone.
    This was working ok, noticed it stopped about a week ago. Any ideas?

    Update:
    Just discovered location info is stored with photo.  Uploaded some to Flickr & location was displayed.  So it's not showing on iPad for some reason.

  • Photos not showing in places.

    Recently a friend of fine who also has an iPhone, change some settings in m y phone(unforunately)
    From then, the photos i took from my camera are not showing up in "Places". I have turned location settings in Iphone on for Camera, but still the problem is persisting.
    I restarted phone once, but still some photos did not get reflected.
    Regards,
    Sharath

    Update:
    Just discovered location info is stored with photo.  Uploaded some to Flickr & location was displayed.  So it's not showing on iPad for some reason.

  • Geo info not showing in places

    I'm unable to get the gps info to show up in iphoto's places on my macbook. It works fine on my imac..
    both computers have the most current iphoto (iphoto 09) and the same pictures (the gps info is there.. it shows latitude and longitude under extended info)
    so, why does gps info show up correctly only on the imac and not the macbook? (nothing shows in places and nothing shows when i click the i in the corner) Is there a preference setting I need to set on the macbook that I'm missing?
    thanks

    so I dont understand why nothing shows up in places
    Have you set iPhoto to look up Places automatically in the Preferences?
    when i click the i in the corner
    That panel contains no Places information.
    Regards
    TD

  • My position in OVI map not showing my correct posi...

    I installed new version of OVI maps today.
    when I clicked on "my position" , it is not not showing my position correctly,
    why it is so? anybody has any experience?

    @gavin_street
    If Nokia Maps have not been used for a while stored ephemeris GPS data is out of date or similarly if application updated data can become corrupted. You don't mention whether you are hapy for Assisted GPS postioning method to utilise a network access point to contact positioning server = supl.nokia.com or whether relying solely upon the Integrated GPS of device. Try going outside away from tall buildings if feasible, launch Nokia Maps and wait 20 - 30 minutes for it to lock on to position.
    It might be an idea to download LeGPSData2 application from Nokia Store so you can keep track of number of satellites acquired:http://store.ovi.com/content/208256
    Happy to have helped forum with a Support Ratio = 42.5

  • MAP not showing perfect

    Dear SAP Guru,
    My MAP is not showing perfect(Seams to me).
    MAP = 8,270.59
    Total Stock = 10,823.288
    Total Value = 58,220,630.81
    Possible MAP =  Total Value(58,220,630.81) / Total Stock (10,823.288) =  5,379.20
    But when I am doing GI, its takes 5,379.20 .
    Will you please clear why it is showing the MAP = 8,270.59 and what are the possible reason.
    Thanks for your advance co-operations.
    Best Regards,
    Shoyeb
    Edited by: AMShoyeb on Feb 1, 2012 8:31 AM

    Hi,
    boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
    check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
    and analyze it you will get ans for same .
    also read following link you will get goo idea about it
    [MAP|Moving average price calculation logic of material with Price Control "S";
    Regards
    Kailas Ugale

  • Base map not showing

    Hello
    I have installed OC4J it is running the demo maps given in tutorials.
    But it is not showing the base map.
    can u suggest me something

    Hi,
    boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
    check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
    and analyze it you will get ans for same .
    also read following link you will get goo idea about it
    [MAP|Moving average price calculation logic of material with Price Control "S";
    Regards
    Kailas Ugale

  • Ios 6 map not showing directions?

    I using a iPhone 4 downloaded latest iOS in my phone but its not showing directions in map app please fix this.

    If you mean that apple maps doesn't work very well in Saudi Arabia then you may find some answers here:
    https://discussions.apple.com/thread/4311003?start=0&tstart=0
    Sadly it doesn't give you the answer you might want but many hope that google maps will release an app soon

  • Color Map not showing time-dependent change

    I am using the latest Sound and Vibration Measurement Suite in Signal Express.  I have a Spectral Map step in my program, which includes a Color Map.  I am recording an accelerometer's transient response to an impact, and want to see the time-dependent frequency intensity changes as a function of time, so a color map should be perfect.  I have no problem recording the accelerometer's transient response in a time graph, and I also see the power spectrum in another graph.  While the color map indeed shows various frequencies at different intensity levels, I don't see the intensity of any of the frequencies change over the course of the 200 ms that I'm recording, while the time graph clearly shows the decaying waveform.  Why doesn't the color map show a decrease in intensity of the respective frequencies as time progresses through the transient?  I have everything set up to display and record the first 200 ms of the impact.  At the end of this period, the intensity should go to almost zero.
    Please see the attached .seproj file to review the parameters I have set.
    Also, with the same .seproj file, I will occassionally get a Buffer Overflow error.  From this file, can you tell me what setting I need to change.  But I need to make sure that all data both displayed and recorded, is for the 200 ms timeframe specified (10 ms before the trigger and 190 ms after).  The ADC I'm using is an NI 9234 in a cDAQ-9172 chassis.
    Thanks,
    --Tim
    Attachments:
    golfclub_200ms_test.seproj ‏258 KB
    Log files.zip ‏200 KB

    Tim,
    I am trying to figure out where this would be able to recognize the changes since the data would be taken from an analysis of one .2 second signal. Have you tried to analyze more than the one signal taken in? When I ran this project I got the display on the bottom right to show one signal as having been read which makes sense when looking at the data. If you wanted to see the changes over the 200 ms timeframe I would have it run continuous DAQmx acquires for that timeframe. It appears the analysis that we see stays static because it is doing analysis of only one data set that came in. I would think that the change in time that you want to see would have to have analysis done on multiple sample sets to notice the differences from one set to the next. 
    Frank,
    National Instruments
    Staff Software Project Engineer

  • I have 16 gb wifi model brand new but Maps not showing my current location

    My iPad is just 2 days old but I don't know what is going on my maps are not able to show my current location I don't
    Know what's wrong with this please do suggest me some measures about what to do',and yea I already turned on my location in
    Settings then also problem continue ,.,,, pls try to answer my querry

    Hi,
    I was facing the same issue with my Ipad - wifi.
    I have found a simple solution for this but it needs you to have a iphone and period of one week.
    if wifi router's mac address is not registered with apple's location services server, the location services on Ipad-wifi does not work, so we need to register wifi router's mac address to apple's server in first place.
    If you have a iphone, then try to install 'Find my iphone' app. install it on your ipad also.
    Initially when you login to this app with both iphone and ipad, only your Iphone will show location as it has GPS location. and your ipad location will not be reflected on this app.
    If you continue to find your ipad using this app on you Iphone, and using your home wifi router, eventually after few days you would be able to track you ipad location, because your wifi router's mac address get registered on apple's server with its gps co-odridnates.
    This has worked for my on 3 different wifi routers in last 8 months.
    Hope this will hope you.

  • Maps not loading in "Places", inside Photo app

    On my 3G, after the upgrade to iOS4, in the Photo app, the "places" map doesn't load...
    The app shows the foto-pins (correctly placed), but doesn't load any map from google... I already tried both in WiFi and 3G only mode, but the app just shows a "squared grey map" (i.e. no map loaded).
    I also tried to start the app in airplane mode, and the popup reminding that a data connection is needed, correctly shows up...
    Any clue?
    Thanks

    Sorry to contradict you but I've zoomed in and out on the map that appears in Photos > Places on an iPhone 3G under iOS4 once the map has been forced to appear correctly and I can go from one small part of the UK to the entire world and back again. Yes, the update of the map is not too quick (depending on 'scale'), but it does work and you can scroll without problem.
    When there are several pins in a small area, zooming in spreads them out and updates the map too.

  • Red pins not showing in "Places" view

    When I click "Places" button at the top for a photo I know has GPS (iphone), it zooms into the map but doesn't show the red pin.  Any suggestions?

    It helped me, thanks!  Your clue helped me find my problem.
    I did something a little different.  I had somehow set a search criteria, which is the box next to the search box on the bottom right.  Once I cleared the filter, my red pins showed up again.

  • Mapping not showing up for Oracle Tables

    I'm just getting started with OWB after attending a class and am using the textbooks received with the course. I've created a project with modules for different schemas each containing several Oracle tables. I don't get the Mapping for either of these modules nor can I use the configure option to create Mappings. Does anyone know what I can do?

    For our OWB projects, we create all modules as target
    modules. It is probably a good idea not to use
    source modules since OMBPlus does not recognize them.Hi,
    I think you may be missing the essential difference between source and warehouse modules. A source module is just that, a place where definitions of he source data is held, which is that data outside the scope of the warehouse project. As such, it makes no sense for OMBplus to reference this information.
    As a practical example, it would make absolutely no sense to run OMBplus against your operational OLTP sytem from which you extract your source data.
    The value of source modules is that you can reference this 'remote' data as though it is local data, and because you have its metadata, you can manipulate it and map from it as though it is 'yours', even though it isn't. Further, the Import Metadata Wizard can provide details on source system changes, and you can then analyse the impact.
    But I'm still puzzled about automatic reconciliation. Please see "Metadata Import and Reconcile" for further details. (52 views and no replies? Surely someone knows how to do this!).
    Cheers,
    Donna

Maybe you are looking for