LR 3 Web Module Cell Number Bug ?

Hi, folks, when in the web module and creating a basic web page with 3 digit numbered cells these numbers are obscured with photos in portrait orientation. No good for a client who is looking at portrait shots and wants to reference a photograph number.
I use a file name for now but this should be corrected asap unless I am doing something wrong here.
Cheers Mark

Same thing occurs in Library Grid view when cells are in Compact mode. It's been this way since January 2006 and I don't see it changing any time soon. Also, using the cell number for any form of selection is fraught with dangers is in no way linked tot he actual image. Delete and image and every thing moves by one. Best solution is to use the file name.

Similar Messages

Html web Gallery: Cell Number Size

I need to determine how to alter the size of the Cell Numbers in the :standard" Lightroom Web Gallery layout.
The numbering is too large to be clearly seen in the upper left hand corner of the cell i;e the thumbnails cover a portion of the numerals.
I'm fairly certain that my client is not going to appreciate this "feature".
How does one change the font size...either in the Lightroom Web Gallery Mode or using HTML...in Dreamweaver or otherwise?
I' will appreciate any help on this.
Thank you

I don't know of a way to influence the size of the cell numbers from within LR.
From outside LR, you have two options:
1) If you want to change the number for a specific web gallery you exported:
Open file [your_webgallery]\resources\css\master.css with a text editor
Find the section ".itemNumber" and change the value of "font-size:" from 40px to something smaller
2) If you want to make the change valid for new HTML web galleries you create:
Open file "\Shared\webengines\default_html.lrwebengine\resources\css\master.css" under your LR installation directory (C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.2 for WinXP)
Do the same edit as above
Note that option 2 has to be repeated after every installation of (new versions) of LR.
Beat Gossweiler
Switzerland

Web Module Deployment Profile Dependencies Bug

In 903 WAR deployment profiles, the profile dependency tab says that "The selected dependencies will be packaged in the same EAR file as this Web Module."
Unfortunately JDev not only does the above, it also includes dependant *.jar, *.war files with the resulting war file under WEB-INF/lib/. This means that jar files often occur multiple times in a EAR file.
The whole build, deploy, debug cycle is very time consuming and this bug just make it worse.

bump.
I am having the exact same problem...
There are a number of configurations regarding the application and/or project deployment profiles that I know work, however as stated above "I need to un-check a jar, save the workspace, re-check the jar then save the workspace again" (the end result being no settings actually changing, just a few saves...) to actually get the deployed application to run.
Otherwise a 'oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NoClassDefFoundError' is thrown in the WLS server log.
Once the application is closed and reopened, and deployment is attempted yet again it fails, and the same process is required to make it work again.
Any help would be greatly appreciated.
I have an open SR lodged with My Oracle Support: SR 7805211.992, if anyone lurking here with access would like to use it for further reference whilst investigating this problem.
Regards,
Matthew.
Edited by: Matthew Carrigy on 6/10/2009 15:46

LR3 Web Gallery Sequence Numbering bug?

Anyone else getting this problem with sequence numbering in the web HTML templates? Basically, as you jump through photos the photo number is always stuck on #1, never changes when you go to the next photo - should go 1, 2, 3, 4, 5...
I just sent a bug report but, wondering if anyone else found a fix for this yet.
This is in LR3 on Mac - really trying to do this on TTG Highslide gallery but, same problem occurs in default Lightroom HTML gallery.
Thanks.
******BUG******
Concise problem statement:
Steps to reproduce bug:
1. Go to Web Module
2. Choose default HTML Gallery
3. Under Image Info set Caption to Sequence
Results:
Sequence caption always shows 1/total images.
i.e. 1/10, 1/10, 1/10, 1/10
Expected results:
Sequence should increment current image number / total images as you click through images.
i.e. 1/10, 2/10, 3/10, 4/10

Yeah, still have the numbering problem using the Image Info sequence outputs.
But, if you use the standard Lightroom Flash Gallery it has it's own sequence numbering output (that does not use Image Info captions) and it does work correctly. These show up as 1/9, 2/9, 3/9 etc. on each photo down by the back/next buttons.
Also, the Cell Numbering does work when using the Lightroom HTML Gallery - though, those numbers only appear on the index page not on individual photos.
But, haven't seen a good work-around yet for sequence numbering in Image Info area. Only option there seems to be typing numbers manually into the caption. Or, if you need the caption for other info maybe use one of the IPTC fields like Headline to type in your numbers. You can then do a Custom Setting in web module to have those text fields show up with your photos.
Really hoping we will see a LR 3.1 sometime soon with a fix - should be an easy correction for Adobe.

TTG Gallery Index - Web module template

Hello,
I'm today releasing my latest project, TTG Gallery Index for Adobe Lightroom. TTG Gallery Index allows you to generate a gallery index from the Lightroom Web module.
Be sure to read through the documentation for usage instructions.
This is a 0.9beta release. Get it:
http://theturninggate.com/blog/ttg-gallery-index-for-adobe-lightroom
Also, there are a handful of known issues. If there be any CSS maestros among ye, I'd love some help squashing the bugs. Issues are documented at the above address.
Feedback/suggestions welcomed and encouraged!

I'm getting an error when I try and save a Web Gallery Index template for future use.
A window pops with an Internet Explorer Script Error:
Line: 1
Char: 1
Error: 'return' statement outside of function
Code: 0
URL: agwpg://templateIcon:8/index.html
Do you want to continue running scripts on this page?
If I try and update the resulting template the line in the error
window labeled URL: will increment the number part of
'templateIcon:x' where x will increment to 9, then 10, then 11, etc.
Any ideas?

How do I import an existing cell number to SAMSUNG GUSTO 3 - Verizon Prepaid? What number do I call? Do I activate first and then request the import via the new Verizon (not wanted cell number)?

The enclosed ACTIVATION & USE MANUAL is very limited. It only tells you how to activate the phone after inputting a zip code. On the web there are many contact numbers for customer service but ALL REQUIRE a Verizon cell number.

A friend I know had this issue and was told to activate the phone first and then call *611. You also can dial from any other phone this number 1 888 294 6804 and choose 1. They both can handle the tranfer without any problem.

Content in a Web Module

Hi,
I am having a very irritating problem. I want to use a filter to transform some content however I do not want the content to have to be inside the .war archive.
If I place the content in any other location the filter cannot be set to operate on it.
If I place the content in the .war archive then every time a designer changes the content I have to rebuild and re-deploy the web-module.
Any idea how I can either have content (which is not in a web-module) be accessed through a filter , or how I can have content appear in a web-module from some other location?
Please help, this is a real show-stopper for our project. Thanks.

I don't think filters are really the way to go about this, rather, create a servlet that handles requests something along these lines:
void service(HTTPServletRequest request, HTTPServletResponse response) {
// get document root, base directory for all the xml files
String docRoot = request.getServletConfig().getParameter("docroot");
// get the document name
String path = request.getPathInfo();
// do some checking on path to make sure it doesn't contain
// '..' or anything like that, throw an exception if it does.
// create a java.io.File object representing the file:
File file = new File(docRoot, path);
if (/*browser is IE6*/) {
    // open the file (using FileInputStream) and copy it to
    // request.getOutputStream()
else {
    // pass the file through an xslt transformation that outputs
    // to request.getOutputStream()
}If this servlet is bound to a context called "context1", and the servlet is bound to "xml", requests for eg. /context1/xml/dira/dirb/doc1.xml will result in request.getPathInfo() returning "/dira/dirb/doc1.xml", given that the servlet-mapping element in web.xml is specified correctly (use a wild card: /xml/*).
And be warned, I just typed this in without trying to compile it, so it probably contains bugs!

Web module not working

Hello everyone,
after some time working with Lr it wanted to try the web module. But on my main computer it wont load, if I try to switch, a message box appears that an error occured. In the console I find this entry:
2007-08-06 23:55:28.468 Adobe Lightroom[1070] CFLog (21): Error loading /Applications/Adobe Lightroom.app/Contents/Frameworks/AgFTPClient.agtoolkit/Contents/MacOS/AgFTPClient: error code 4, error number 0 (Library not loaded: @executable_path/libCurl.dylib
Referenced from: /Applications/Adobe Lightroom.app/Contents/Frameworks/AgFTPClient.agtoolkit/Contents/MacOS/AgFTPClient
Reason: image not found)
On another computer it works. Do I have to reinstall the OS (already reinstalled Lr) or could anyone point me to the image it can not find on this machine?
Thanks,
Markus

When you called the web service from the test dialogue, did it work? If you get any error, please paste it here.
Also, please take a look at the example in
this doc which also uses a writer. Note that if you have a writer writing the results to a destination, you typically don't need a web service output. See the below images, 1 with Web service output, another with a Writer. The writer needs to
be configured.

Can LR Web module converting file name hyphens into underscores be disabled

Hi,
I have problems when creating webpages from within LR.
First I develop the RAW files and converts them to jpegs. Under Lightroom 3 I use the following settings under "Export location":
Export to: Specific Folder
Add to This Catalog: ticked
Existing Files: Choose a new name for the exported file
This is thus native Lightroom. For existing files the new filenames are generated with a hyphen follwed by a numeric suffix. as follows: for FileName.jpg this would be FileName-2.jpg, FileName-3.jpg.
Afterwards I use the web module with the TTG Highslide Pro plugin to generate the webpages. For each image on the page there is a link to the original image to download it. It is here where a problem occurs. With the above mentioend naming convention (adding a hypen when files do already exist) there is no problem at all to display the photos nor as a tumbnail, nor in the slideshow.
When trying to download the high resolution image however a problem occurs. The file can't be found. This is due to the hyperlink pointing to filenames like FileName_2.jpg and FileName_3.jpg. As the image itself is having a hyphen followed by a numeric suffix it can't be found when the link is pointing to that file using an underscore instead.
So to me that's a little problem as I am not at the steering wheel at any of the two moments where a naming convention is applied; the automatic filename generation at time of export from Lightroom and the change of the hyphen to the underscore when generating the webpage.
Any Idea how this can be solved? Or having an underscore used by the automatic naming in Lightroom, or using the hyphen (leaving the filename as it is) when generating the webpage with the LR web module.
I posted that question already at the TTG forum and got the following respnse from Matthew: "Lightroom's Web module converts file name hyphens into underscores. It's not something I have any control over at all."
Any help would be appreciated.
Kind regards,
Patrick

I have the same problem in that filenames created with (for instance) photographer-place--year_month_day-filename.cr2 are exported by Lightroom 3.4.1 correctly, without change, into jpg versions, but TTG Highslide Gallery Pro (or, rather, Lightroom) forces a conversion eliminating the dashes and replacing them by underscores. TTG states on its website that this is unavoidable in the Lightroom web module, and recommends entering one's wishes in the "File Handling" tab within Lightroom Preferences.
However, my LR preferences include the standard File Name Generation option "Replace illegal file name characters with: Dashes (-)" so this would indicate that a dash is not regarded by Lightroom as illegal and therefore should be left alone. As is in fact the case on a normal export from a raw cr2 to jpg: no change in Lightroom and therefore no problem. But export via LR via TTG causes an unwanted conversion from dashes to underscores.
While searching the web I came across this old post http://thephotogeek.com/ttg-web-gallery-client-selections-lightroom/
which mentions the question as a LR2 bug.
I then exported a web gallery using LR's standard web template and here too all file names are converted from dashes to underscores, despite what is entered in LR's preferences. So my conclusion is that this remains a LR bug, and no fault of TTG.
I am delighted with TTG and couldn't do without it, but am still stuck with this issue which shouldn't need to be an issue at all, if only LR would leave things alone.

Why Does Lightroom Web Module Export Images At 240 ppi?

Firstly, please forgive my ignorance on this subject. I am in the process of getting together a website of my images and have been experimenting with preparing the images and thumbnails through Lightroom's web module. I've noticed that when opening the finished images in Elements, that they have all been converted at 240ppi. Surely, images for websites should be at 72ppi (or possibly 96ppi)? Or am I dimmer than even I thought?

should I simply ignore the resolution box?
Yes indeed. You set the size unit box in the export dialog simply to pixels and then size the right number of pixels for your web use. Typical is for example 800 pixels on the long end. The resolution box is not relevant for web use. It is really only used as a hint to a final printing size.
So I imagine the 240ppi conversion must be the Lightroom default value. Do you think?
Very likely so. I believe Lightroom, just like Photoshop, assumes 240 for files that do not start out having the tag so that is probably what happened if this started as a scan. Many scanners do not write this tag at all, but most DSLRs write the tag into their files and it is usually 240 for older generation cameras and 300 for later ones. I don't know why they do that as it is again not relevant as people print at any size they want.

Error when binding Web Module

Hi,
I am deploying an application on OC4J 10.1.3.3.0.
It passed the compilation and have the following problem at the end of deployment.
Starting up resource adapters
Initializing EJB sessions
Committing ClassLoader(s)
Initialize xxx begins...
Initialize xxx ends...
Started application : xxx
Binding web application(s) to site default-web-site begins...
Binding xxx web-module for application xxx to site default-web-site under context root /xxx
Operation failed with error:
Error instantiate servlet classes
Any reason for this problem or somewhere I can look into it?
Thanks

Hi 
I am still facing problems while configuring the servers in java enterprise studio. i did like this. 
In the runtime tab-->installed servers-->internal tomcat (which is showing running)---> ther e is a local host node like localhost:8081. 
if i go to properties of localhost:8081 by right clicking the settings are as follows: 
Http-connector = 8081 
default host = localhost 
defalut engine= Tomcat-internal 
In my web module : i right clicked the web-inf icon and made settings like this: 
WEB-INF->properties-->execution--->target_server= internal tomcat
 
with all my above settings if i deploy my web module it is deploying...but if i access the index page from browser by typing the url http://localhost:8081/index.jsp 
it is giving a dialogue box stating that Connection was refused when attempting to contact local host 8081 i tried with the port number 7001 also.. i am getting the same message.... 
Can any body please help me to solve this problem and give the information to configure these servers???
thanks!!!

Help: blank photo in all but web module

Hi, just upgraded to v2 of LR, huge problem, all photos imported are shown as blank. I have tried to re-import, create a fresh profile etc...nothing works. LR only shows square photo placeholder with large number identifying the photo. But the web module works, photos are shown just fine.
I've opened same set of photo in PS3, ACDSEE, they are all fine. Previews don't work either, its as if LR Library/Dev/Slideshow/Print modules don't recognize them. Can anyone help?

have you backed up and rebuilt the thumbnails (depress the option and command keys and launch iPhoto use the rebuild thumbnails option)
LN

Web module - Upload settings not saved in preset

Hi,
When creating a new preset in the Web module, the current upload settings are not saved. Which constantly leads to annoying mistakes when updating a site. I'm aware of bug reports that have been filed about this issue and the answer was "as designed". I tend to consider this as a bug.
Could someone explain this very strange design choice?
Thanks.
Patrick

nike air max 2011 is the most successful in recent years, a shoe. Not only because of the quality and 100% price guarantee and also we supply all nike shox welcomed by many customers from around the world, they often found that the length of the right to run. air jordan 2010 as the world's most popular shoe, its unique appearance, quiet feel, can show you better have a good taste, at the same time, nike shox torch can slso support cutting breathable, flexible design, open cage net cage covered by combination of insole molds to your feet in the quiet and the shape of the foot support. new jordan shoes 2010, jordan retro shoes can increase the length of the quiet end of the degree. The new damping system, combined with a suitable natural gait movement works, all are designed to bring you the most tranquil experience.Welcome to visit us:http://www.nikejordanlink.com .

LR3 Web module not loading pix of collection

Hi All,
I still have the same problem using the web module, which doesn't load all the pictures of the collection, and bugs. I never had this problem before using LR2. Does anybody encounter the same issue? Is there a way to fix this ?
Thanks for your help,
Sebastien

Resolved the problem.Found a tag missing from web.xml file.

Siri giving my cell number for my business

I own a business and some of my new customers have been calling me on my cell phone. My cell phone number is not on my business web site. When I asked them how they got my cell number, they responded siri gave it to me. They said they used siri to do a search for my business and my cell number is the number it gave. How could this happen if my cell number is not listed and is not on my business web site? Any help would be greatly appreciated.
Thanks

All Siri does is query things like Yelp, or search engines like Google to get her results... Something out there has your cell number listed for your business. Apple doesn't control that.

LR 3 Web Module Cell Number Bug ?

Similar Messages

Maybe you are looking for