LR Sequential Numbering Issues

When is LR going to have a sequential numbering system that remembers the last number and restarts from that last number. When will LR copy your images through the ingest process in two different locations, identical to each other. LR should review the way Photo Mechanic does both of these chores and COPY them. Lets hope it happens sooner rather than later. Please Adobe?

Jim-
This link may be a better shot:
http://www.adobeforums.com/webx/.3bc34322/ is for feature requests.

Similar Messages

ERS generated Invoice Not Editable when Sequential Numbering is enabled

Dear All,
We have an issue of the ERS Generated invoice (Autoinvoice) number not editable, if the Sequential Numbering Profile option is set to YES.
We need to keep the Sequential Numbering enabled to generate the Voucher Number.
In the case of ERS generated Invoice, the Voucher number won't get generated automatically, if we do the validation of the Invoice.
But normally created invoices will be generating the Voucher Number, when a validation of the invoice is done, even though the Sequential Numbering profile option is NOT set.
Our requirement is that the ERS generated Invoice number should be editable, as well as the Voucher Number should get generated automatically when a validation of the invoice is been done.
How can we achieve this..? Please update....
many thanks in advance.....

Hi,
Have you checked whether the POdelivery (PO quantity) has cmpleted in the previous invoice? Is the PO marked for ERS? If no please mark for ERS. I hope this will help you. Thanks
Edited by: Padmasri G on Sep 6, 2011 4:55 AM

Changing Profile option 'Sequential Numbering' at Site Level

Hi -
I need some input regarding a change that I am planning to make to fix the following error in Order Import:
"Your profile option does not allow automatic numbering.
Please ask your system administrator to change the sequential numbering profile."
At our site, we are not using Automatic Numbering for any types of orders, RMAs etc. These numbers are provided by the legacy system, which populates the OE interface tables. Right now, the Profile Option "Sequential Numbering" is set as follows:
Site: Not Used
Application: Order Management - Partially Used
Responsibility: Order Management User/ Super User - Partially Used
I have found that if I change the Site profile to 'Partially Used', I don't get this error.
How will this change affect other applications like AR, AP, OKC, OTL etc? What do we have to be careful about? Do we need to test anything else? Any feedback will be appreciated.
Thanks
[email protected]

EDI inbound(Order) program had been successfully Reading data from the Flat file placed in the inbound folder and Inserting the data correctly into the Interface tables and automatically firing the Order Import Program. How-ever Order import program was failing to create an order giving a error message like
‘Your profile option does not allow automatic numbering.
Please ask your system administrator to change the sequential
numbering profile.
I tried running the Order import Program manually after inserting the very same data in to the interface Tables from PLSQL developer. And the order was getting created successfully.
To debug the issue further what I did was - Disabled the “Order Import” Concn program, placed the data file in the inbound folder and ran the EDI Order Inbound Program. The idea was to compare the entries in the interface tables between the one inserted by the EDI program and ourselves from PLSQL developer. The Data seemed to be the same. Then I enabled the “order Import” Conc Program and ran the same for the very same entry inserted by the EDI inbound program and the Order got created successfully….!
The responsibility was the culprit…!
EDI Inbound is run from ECE Super User and Manual Order Import from OM Super user…
Now order is getting created Successfully from e-Com Resp through EDI Inbound after setting that Profile Value to "Always Used".

Printing sequential numbered barcodes using Process Manager 9.0

I am trying to produce tickets that require two barcodes that are sequential numbered but I need to apply a .csv file for the numbering. How can I apply the csv file for the numbering to the barcode module or do I have to run it thru the manifest which is a part of Process Manager??

Hello Tim.
Thank you for using the Support Forum. If you have not already resolved this issue, we suggest you search our online knowledgebase for your product: FreeFlow Process Manager .
Alternatively, you can visit our Contact Us page for other support options.

Ipad form ....help needed please. Clear form after email as read only and sequential numbering

Hi
i am a complete novice at this however this is what I want to achieve.
i Have a paper duplicate report sheet that I want to get electronically, I want to be able to add sequential numbers to each report and be able to email the report to the client from a email field in the form
so far I have so I have created the pdf form, I have a button that runs a JavaScript that will hide the submit button and then send to the clients email and to bcc myself so I have a copy of the report also. This has been tested and works
i Am struggling with sequential numbering and once the form has been emailed it's un-ditable as the JavaScript has converted it to read only for emailing which is good as it can't be edited. But Is there a way on my submit button to email the report as read only and then clear all form fields in the report ready for filling with the next sequential number?
I Have had a good look sound for a resolution to this but am struggling
many thanks in advance for any feedback
paul

Hi Paul,
I presume that you are using the desktop version of Acrobat Pro to author the form.
I will move this discussion to the PDF Forms forum so that the experts in the forum can answer your question.
Please note that the Reader/Acrobat DC mobile apps (for iOS, Android, Windows Phone, etc.) have limited JavaScript support.
JavaScript for Reader Mobile API Reference (iOS)
You may be able to make the form work as you want in the desktop version of Adobe Reader/Acrobat Reader DC. However, some functionality (e.g adding a sequence number to each PDF) will not work in the mobile apps due to the limited JavaScript support. Sorry for the inconvenience.

Is there a Plug-In that automates sequential numbering of an independent text element?

Is there a Plug-In that will enable automated sequential numbering of a particular item of text, independent of any of the other InDesign cues? Have some very large instructional book documents that have a main numeric element that is sequential and independent from page numbering or anything else that REALLY NEEDS to be automated. If nothing exists off the shelf how much would it cost for someone to created this software for me?

Found this link via Google. I have CS6 and it looks like this, don't know about CC.
How to Keep a Log of Your Work in Photoshop - Digital Photography School

How to print Sequential Numbers like purchase order?

I ma new to mac and Numbers 09 and have a quick question. How do I print sequential numbers? I have my own MS Excel purchase order number with macro and I want to use Iwork Numbers to print the numbers. For example, Purchase Order: 70085-1 is in my form. When I ask to print 20 copies, it will print 70085-1, 70085-1, 70085-3, etc.
Thanks in advance

Here is a modified version of my original script which was posted in :
http://discussions.apple.com/thread.jspa?messageID=12679002
This time, with a single run, we may define the number of consecutive invoices to create.
--[SCRIPT openAndNameInvoiceWithAnumber]
Enregistrer le script en tant que Script : openAndNameInvoiceWithAnumber.scpt
déplacer le fichier créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications:Pages:
Il vous faudra peut-être créer le dossier Pages et peut-être même le dossier Applications.
aller au menu Scripts , choisir Pages puis choisir openAndNameInvoiceWithAnumber
crée un nouveau document à partir du modèle personnel prédéfini
et renomme le document avec un nouveau numéro.
Il insère également le numéro de facture au début du document.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as Script, Application or Application Bundle: openAndNameInvoiceWithAnumber.xxx
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
Maybe you would have to create the folder Pages and even the folder Applications by yourself.
go to the Scripts Menu, choose Pages, then choose openAndNameInvoiceWithAnumber
will create a new document from the defined user template
and name it with a new number.
It also insert the invoice number at the very beginning of the document.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
--=====
Yvan KOENIG (Vallauris, FRANCE)
2010/11/30
2010/12/20 edited to apply if the template is a flatfile one.
2011/01/11 added ability to build several invoices in a single call
property theApp : "Pages"
property theExt : ""
property myTemplate : "ma_facture.template" (*
Adapter à vos besoins
Put your preferred template name *)
property fichierNum : "le_numéro.txt" (*
Adapter à vos gouts
Put your preferred text file name *)
--=====
on run
if theApp is "Pages" then
set theExt to "pages"
else
if my parleAnglais() then
error "The application “" & theApp & "” is not supported !"
else
error "L’application « " & theApp & " » n’est pas gérée"
end if
end if
if my parleAnglais() then
set nombredefactures to my askAnumber("Enter the number of consecutive invoices needed", 1, "i")
else
set nombredefactures to my askAnumber("Saisir le nombre de factures consécutives demandé", 1, "i")
end if
repeat nombredefactures times
my buildaninvoice()
end repeat
end run
--=====
on buildaninvoice()
set {p2myTemplate, numero} to my prepare()
set numero to text -5 thru -1 of ("0000" & numero) (* pour numéro de 5 chiffres *)
set UNTITLED_loc to my getLocalizedFrameWorksName(theApp, "Untitled")
tell application "Pages"
activate
try
close document UNTITLED_loc
end try
end tell -- to Pages
tell application "Pages"
activate
open p2myTemplate
set theDoc to numero & "." & theExt
set name of document 1 to theDoc
tell document 1
tell body text
if my parleAnglais() then
set paragraph 1 to "invoice #" & numero & return & paragraph 1
else
set paragraph 1 to "facture n°" & numero & return & paragraph 1
end if
end tell
end tell
end tell
end buildaninvoice
--=====
on getLocalizedFrameWorksName(theApp, x)
local p2bndl
set p2bndl to (path to application support as text) & "iWork '09:Frameworks:SFApplication.framework:Versions:A:Resources:"
set x_loc to my getLocalizedName(theApp, x, p2bndl)
return x_loc
end getLocalizedFrameWorksName
--=====
on getLocalizedFunctionName(theApp, x)
local p2bndl
set p2bndl to (path to application support as text) & "iWork '09:Frameworks:SFTabular.framework:Versions:A:Resources:"
set x_loc to my getLocalizedName(theApp, x, p2bndl)
return x_loc
end getLocalizedFunctionName
--=====
on getLocalizedName(aa, tt, ff)
tell application aa to return localized string tt from table "Localizable" in bundle file ff
end getLocalizedName
--=====
on prepare()
local d1, d2, p2d, containerOfTemplates, pathToTheTemplate, p2n, nn
tell application theApp
set d1 to localized string "Templates" (* nom local du dossier "Modèles" *)
set d2 to localized string "My Templates" (* nom local du dossier "Mes Modèles" *)
end tell -- theApp
set p2d to (path to application support from user domain) as Unicode text
set containerOfTemplates to p2d & "iWork:" & theApp & ":" & d1 & ":" & d2 & ":"
set pathToTheTemplate to containerOfTemplates & myTemplate & ":"
try
set pathToTheTemplate to pathToTheTemplate as alias
on error
if my parleAnglais() then
error "The template “" & pathToTheTemplate & "” is unavailable! Please make sure the template file “" & myTemplate & "” is installed in Numbers “Templates:My Templates” folder, then rerun this script."
else
error "Le modèle « " & pathToTheTemplate & " » est introuvable! Veuillez installer le fichier modèle « " & myTemplate & " » dans le dossier « Modèles:Mes modèles » de Numbers avant de relancer ce script."
end if
end try
tell application "System Events"
if class of disk item (pathToTheTemplate as text) is file then
(* flat file *)
set p2n to containerOfTemplates & fichierNum
if not (exists file p2n) then
make new file at end of folder containerOfTemplates with properties {name:fichierNum}
write "100" to file p2n (* mettez le numéro de départ de votre choix *)
end if -- not…
else
(* package *)
set p2n to "" & pathToTheTemplate & fichierNum
if not (exists file p2n) then
make new file at end of pathToTheTemplate with properties {name:fichierNum}
write "100" to file p2n (* mettez le numéro de départ de votre choix *)
end if -- not…
end if
end tell -- System Events
set nn to read file p2n
set nn to ((nn as integer) + 1) as text
write nn to file p2n starting at 1
return {pathToTheTemplate, nn}
end prepare
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
Asks for an entry and checks that it is an floating number
set myInteger to my askAnumber(Prompt, DefaultValue, "i")
set myFloating to my askAnumber(Prompt, DefaultValue, "f")
on askAnumber(lPrompt, lDefault, IorF)
local lPrompt, lDefault, n
tell application (path to frontmost application as string)
if IorF is in {"F", "f"} then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be a floating number." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre décimal." & return & "Veuillez recommencer."
end if
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be an integer." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre entier." & return & "Veuillez recommencer."
end if
end try -- 1st attempt
end if -- IorF…
end tell -- application
Here if the first entry was not of the wanted class
second attempt *)
tell application (path to frontmost application as string)
if IorF is in {"F", "f"} then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
end try -- 1st attempt
end if -- IorF…
end tell -- application
if my parleAnglais() then
error "The value you entered was not numerical !" & return & "Goodbye !"
else
error "La valeur saisie n’est pas numérique !" & return & "Au revoir !"
end if
end askAnumber
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mardi 11 janvier 2011 09:30:37

RoboHELP to PDF Page numbering issue

HI,
I am experiencing a problem related to page numbers in the pdf generated through the RoboHELP source files. Hereby I am giving some images of the initial pages of the PDF, in which I have clearly explained the issue. I have removed the content and images related to our project. Please let me know, how I can overcome this issue.
NOTE: The page numbering issue was not there earlier. I have imported two frame maker files. Then I was not able to generate a PDF. That particular FM file had a table. Read in the Adobe forum that some type of tables may affect the generation of PDF. Hence, I have deleted the FM files. Since then I am facing the page numbering issue.
Here are the images with my explanation of the issue:
The following is an image of the pdf. This is actually the fourth page of the pdf, but it is numbered as xiv.
The next pae is numbered as xv. Again the numbering reverted back to xiv as shown in the following iamge.
Immeditely after the TOC, the 1st page is numbered as 115.
Again every 1st page of a chapter is starting as page number 115
The 2nd page of every chapter is numbered as 126.
The 3rd page of every chapter is numbered as 125.
The fourth page again numbered as 126 followed by 125, which is continuing till end of the chapter.
Please let me know how this issue can be solved.

I am not sure what is causing this but can suggest a workaround. Instead of publishing direct to PDF, create a Word document only. That may have page numbering issues but there you should be able to correct them. Then publish your PDF from Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Sequential numbering of imported scanned images in Aperture 2.1.4?

I have a large number of old photographs which I want to import into Aperture 2.1.4. via a scanner, (Lexmark P4350) and I would like them to be sequentially numbered preferably into the Version Name field but any field would do. At the moment they are kind of numbered as "Scan 01" "Scan 02" etc., but this only applies to each session I do—going back to "Scan 01" for the next session. Is there any way that this can be achieved so that all the imported images are sequentially numbered? I did wonder whether or not an Automator script would do it but I have not worked out how to use Automator! I am using Image Capture to scan and import into Aperture. Any help would be great. Thanks

This should be extremely easy to do with a custom name template after import into Aperture - you can choose to rename just the version or the file names as well. There are many different templates you can set up and each one containing a sequence will retain it's own count and pick up where it left off.
This post is for export but it works the same way for version and file-renaming, you can do it at the time of import or after using the metadata batch change function.
[http://photo.rwboyer.com/2008/10/28/aperture-2-quick-tip-naming-exported-images >
RB

Adding sequential numbers to a slide show using Lightroom 4.4?

How do you add sequential numbers to a slide show using Lightroom 4.4? I want images to show sequentially with each having a specific number such as 1 of 25, 2 of 25, 3 of 25 and so on. Please advise.

Sorry, that computer is not connected to the internet right now- husband is using wifi to watch World Cup. Here's a picture from my phone. If it's too hard to read I can take a screen shot in an hour or so.
Thank you both in advance for your help.

Photos recently changed from sequential numbering to date/timestamp. When I import into apps for editing they are out of order. What can be done to change back to sequential numbering instead of date/timestamp?

Photos recently changed from sequential numbering to date/timestamp. When I import into apps for editing they are out of order. What can be done to change back to sequential numbering instead of date/timestamp?

The date information is taken from the camera which writes it to the file. This needs to be set to the correct date and time in the camera itself.
The order the images are shown in the Library mode is set by clicking on the sort button in the tool bar, which if not showing can be activated from view, tool bar. There are different sort orders that can be applied including sorting by file name. You can also sort by dragging the images to the order you wish them to appear in by selecting user order.

Sequential numbering for pdf form

I am trying to find out how to have sequential numbering of a pdf form that will be accessible on a shared drive. I need a new number assigned each time it is opened. Please help!

Hi,
There is not a way for the person filling out the form to see such a number the instant they fill out the form. If the form e-mails to the respondent with a copy of their responses however, the e-mail includes text indicating which response number their submission has counted up to. (If you also receive e-mail receipts of each submission, you would see the same info.)
So, for instance, you and the respondent would see, at the top of the e-mail, something like:
"The form <your form name here> has a new submission.
Total Responses: 238"
I hope that helps,
Brian

Making sequentially numbered forms in InDesign

I am a prepress designer and I have a 2 part NCR form which needs to be sequentially numbered (1-xxxx) in the top right corner.
I used to send out any forms that needed numbering because I thought I could not do it in house until today. I was told by another store that I can look into Variable Data through InDesign and print out these NCR forms on my digital press with the numbering correct in the top corner. I know how to use other Adobe programs but not InDesign.
Can someone please point me on a direction i should be researching to accomplish this project? thanks!

I do this all the time using Data Merge, do forms, 4up and 8up Raffle tickets, etc.
First set-up you numbers by using data fill in Excel, (single column for 1 number) export as text, for some reason Data Merge doesn't like my excel text files and requires me to open in text edit and save as text again.
Set-up you data merge cell(s), link your data
Export your merged file.
Yes the files can be large, but you have just saved the process of sending your forms to a place to crash # them @ $25 min. run.
For short run consec #ing, this is great, but I've even done 8up 11x17 raffle tickets with 10,000 #'s (usually break the file in 2 or 3 units), when a fast turnaround on color laser was required. You need a fast processor to do something like this.

Sequential numbering using Office for Mac

I have Office for MAC. Is there an easy way to create raffle tickets with sequential numbers?

First, uninstall the software responsible for installing these extensions:
com.logmein.driver.LogMeInSoundDriver          1.0.0
com.squirrels.driver.AirParrotSpeakers          1.8
com.rim.driver.BlackBerryUSBDriverInt          0.0.68
If removing the software and extensions doesn't solve the problem, then you are probably correct about the GPU:
The problem is likely due to the discreet GPU failing. Download gfxCardStatus 2.3 and use it to disable the GPU. This is a temporary workaround until you get your motherboard replaced.

Sequential Numbering (Ex: Invoices) and #-Up per Sheet

I have a 3 part NCR Invoice which measures 5.5x8.5. In the bottom left corner I need to put sequential numbering beginning with 31677 and continuing on 1,000 times. I am going to copy this sheet and put it 4-up on 11x17 sheet size. Is there anyway i can have Acrobat automatically number the forms correctly? if not, is there a plug-in or another program that will allow me to do this? thanks!

I don't know how to do this in Acrobat, but I could do it in FileMaker Pro in no time. If I only wanted paper copy I could do this in FrameMaker for output into a pdf file. The advantage FileMaker Pro has is that it could used to store the Invoice data if it was the sort of information you needed to keep track of.

LR Sequential Numbering Issues

Similar Messages

Maybe you are looking for