Lsgrp - list all members of a group

lsgrp is a small and fast utility written in C that does just one thing: it lists the members of a group. It can be used in scripts that need to do something for each user in a group, such as setting up directories or generating per-user configuration files. There is a section on the project page explaining why a new utility was necessary.

I agree, addressing a new message to a group using Address through the Mail program seems to fill in just the first recipient's name.
A work around is to start your new message, click on Address and select the group you wish to send the message to. Take the extra step to highlight the first person in the group and then command-A to select all. When you then click on the To: button all of the recipient's will be in the address line of your mail message.
Alternately, start your new message and then type the name of the group in the To: line (don't use the Address button at all). You don't have to get all of the name typed in before the group name is identified. When the group name has been properly identified just hit the Return key and all of the group members will be filled in the To: line. This should do what you are hoping for.
Dale

Similar Messages

  • When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all.

    When I send a Group message from my address book, the entire group gets listed in the "To" line. How do I get each member to receive the message individually without listing all members? Its just messy is all. Any help is greatly appreciated.

    Hey Grupo Castillo,
    Thanks for the question. You can actually configure this behavior from Mail preferences:
    1. Choose Preferences from the Mail menu.
    2. Click Composing.
    3. Deselect the checkbox for "When sending to a group, show all member addresses".
    When you send an email to the group, only the groups name will be seen.
    Mac OS X: Mail - How to Hide Address Book Group Member Names When Sending an Email
    http://support.apple.com/kb/TA21082
    Thanks,
    Matt M.

  • How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

    How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
    This would be an SMS group similar to an email listserv but running on the SMS network
    I have seen private individuals offering this service
    It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
    Steve

    I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

  • Can we list all the users or groups with there rights on the universe\s

    Can we list all the users or groups with there rights on the universe\s using query builder.
    Can we do the same by using auditor reports.
    PLZ  help

    Thanks ,
    It can be acihived by using secuirty viewer.
    Thanks again

  • Deprovisioning Task for Deleted User Removes All Members of AD Group

    Hello all,
    I was wondering if anyone had ever encountered this issue before. We're on 7.1 SP5.
    Here's the setup, we have several privileges that are linked to Active Directory Group membership. We have tasks set up to add or remove a user from the membership list of the AD group that are linked to the Provision and Deprovision tasks on the privilege. This has been working very efficiently for us: when a user is assigned the privilege they are added to the group, and when it is removed they are removed from the group. There are no approvals involved.
    Recently, we've run into an issue that when a user with a privilege gets deleted from the Identity Store, the Deprovision task gets kicked off, but the user DN that is passed in the LDAP task is NULL. This essentially sets the member attribute on the AD Group to NULL, thus removing all members.
    Typically it will throw a warning about deleting obsolete entries and never updates the group. The event tasks seem to be kicked off after the entry is removed from the Identity Store, so it does not seem like a timing issue.
    We've had this up and running for several months, but only recently have we had the issue. It does not seem to be restricted to any group, but it will not happen for all the groups. The users in question have had other privileges corresponding to AD group access, but those groups were not emptied.
    Any help would be appreciated..
    Thanks,
    Jared

    Matt,
    The problem is that this is not being initiated from a task, but form our nightly maintenance job. These users are falling off because of AD updates outside of our system.
    If a DN is deleted from AD, it's already been removed from the groups in AD, but the privileges in our Identity Store haven't synced yet. If we strip all privileges before the entry is deleted, and the DN is no longer valid, the event task will bomb because it is trying to remove a user that doesn't exist anymore.
    I'm thinking of just trapping it in the jobs with a script that checks that the user DN is not null. If it is, just skip the entry.
    And yes, I will be at TechEd.
    Thanks,
    Jared

  • Listing all users in a group

    Hi guys,
    I need to write some code that returns a list of Users that belong to a particular group, using pt 5. This has been asked in lots of different posts but no answer has been given. There must be a way to do this somehow.
    Should I be doing an IPortalSearchRequest and then filtering by group? I can't work out how to do this, or even if it is possible. Or should I be using the IUserGroupManager interface? It does not seem to be documented anywhere.
    I do not want to resort to reading the PlumTree DB but it looks like I may have to. Obviously this defeats the whole point of the API - but considering this changed from 4.5 to 5 maybe this is not a problem!

    Also check these other two posts. If the gateway blows up the links I'm sticking in below, just use the general portal search to look for "QueryUsers"
    http://portal.plumtree.com/portal/server.pt?in_hi_req_objtype=18&in_hi_req_objtype=17&in_hi_req_objtype=1&in_hi_req_objtype=512&in_hi_req_objtype=43&in_hi_userid=281772&in_hi_req_bbs=1&in_hi_req_thesaurus=1&space=SearchResult&in_hi_req_spell=1&parentid=1&cached=false&control=searchstart&in_hi_req_gadsrchtype=bannersearch&in_hi_req_initialsearchstring=QueryUsers&in_hi_req_page=50&in_tx_query=QueryUsers&in_hi_req_lang=en&parentname=SearchResult#
    http://portal.plumtree.com/portal/server.pt?in_hi_req_objtype=18&in_hi_req_objtype=17&in_hi_req_objtype=1&in_hi_req_objtype=512&in_hi_req_objtype=43&in_hi_userid=281772&in_hi_req_bbs=1&in_hi_req_thesaurus=1&space=SearchResult&in_hi_req_spell=1&parentid=1&cached=false&control=searchstart&in_hi_req_gadsrchtype=bannersearch&in_hi_req_initialsearchstring=QueryUsers&in_hi_req_page=50&in_tx_query=QueryUsers&in_hi_req_lang=en&parentname=SearchResult#

  • List all AD users with memberof

    Hi I have got this script and it works fine, but I cant add the memberof groups for each user. 
    On Error Resume Next
    Const ADS_SCOPE_SUBTREE = 2
    Const ADS_UF_ACCOUNTDISABLE = &H0002
    Const ADS_UF_PASSWD_NOTREQD = &H0020
    Const ADS_UF_PASSWD_CANT_CHANGE = &H0040
    Const ADS_UF_DONT_EXPIRE_PASSWD = &H10000
    Const ADS_UF_SMARTCARD_REQUIRED = &H40000
    'Set RootDSE
    Set objRootDSE = GetObject("LDAP://rootDSE")
    strDomain = objRootDSE.Get("defaultNamingContext")
    strADPath = "LDAP://" & strDomain
    'wscript.Echo strADPath
    Set objDomain = GetObject(strADPath)
    'wscript.echo "objDomain: " & objDomain.distinguishedName
    Set objConnection = CreateObject("ADODB.Connection")
    Set objCommand = CreateObject("ADODB.Command")
    objConnection.Provider = "ADsDSOObject"
    objConnection.Open "SAURON"
    Set objCommand.ActiveConnection = objConnection
    objCommand.Properties("Page Size") = 1000
    objCommand.Properties("Searchscope") = ADS_SCOPE_SUBTREE
    objCommand.CommandText = _
    "SELECT Name, description, sAMAccountName, st, postalCode, co, l, profilePath, homeDrive, distinguishedName,userAccountControl FROM '"& strADPath &"' WHERE objectCategory='user'"
    Set objRecordSet = objCommand.Execute
    objRecordSet.MoveFirst
    Set objFSO = CreateObject("scripting.filesystemobject")
    Set logStream = objFSO.opentextfile("C:users\dom.adm.pa\desktop\domainusers.csv", 8, True)
    logStream.writeline("Name,Description,sAMAccountName,st,postalCode,co,l,Account Disabled,Password Required,User Changable Password,Password Expires,Login Count,Last Login,Last Password Change,Created,Modified")
    Do Until objRecordSet.EOF
    strDN = objRecordset.Fields("distinguishedName").Value
    Set objUser = GetObject ("LDAP://" & strDN)
    If objRecordset.Fields("userAccountControl").Value AND ADS_UF_ACCOUNTDISABLE Then
    Text = "Yes"
    Else
    Text = "No"
    End If
    If objRecordset.Fields("userAccountControl").Value AND ADS_UF_PASSWD_NOTREQD Then
    Text = Text & ",No"
    Else
    Text = Text & ",Yes"
    End If
    If objRecordset.Fields("userAccountControl").Value AND ADS_PASSWORD_CANT_CHANGE Then
    Text = Text & ",No"
    Else
    Text = Text & ",Yes"
    End If
    If objRecordset.Fields("userAccountControl").Value AND ADS_UF_DONT_EXPIRE_PASSWD Then
    Text = Text & ",No"
    Else
    Text = Text & ",Yes"
    End If
    logStream.writeline(objRecordset.Fields("Name").Value & ","_
    & objRecordset.Fields("description").Value & ","_
    & objRecordset.Fields("sAMAccountName").Value & ","_
    & objRecordset.Fields("st").Value & ","_
    & objRecordset.Fields("postalCode").Value & ","_
    & objRecordset.Fields("co").Value & ","_
    & objRecordset.Fields("l").Value & ","_
    & objUser.logonCount & ","_
    & objUser.LastLogin & ","_
    & objUser.PasswordLastChanged & ","_
    & objUser.whenCreated & ","_
    & objUser.whenChanged & ","_
    Loop
    logStream.Close

    Are you looking for members:
    1) in a specific group, or
    2) list all users and all their direct groups, or
    3) get a complete list of all groups a user is a memberof, to include nested?
    I would recommend using Powershell.  It's made for this type of thing.  Some of the Cmdlets you can check are:
    List all users with all groups:
    Get-ADUser -filter * -properties memberof | select samaccountname,memberof
    List all members of a group:
    Get-ADGroupmember <groupname> -recursive
    Get all groups a member is nested in:
    Get-ADAccountAuthorizationGroup <username> | ft name
    - Chris Ream -
    **Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

  • Multiple members of HSRP group - implications?

    I've got a group of 6509's that support a couple dozen IP networks. Recently we ran into the "16 HSRP groups" limitation.
    My question is, if I assign multiple VLAN's to a single HSRP group, and one of the member interfaces becomes unavailable, do *all* members of that group go from active to standby? Or just the affected IP/VLAN?

    Hi,
    it effects on that particular Vlan not the entire HSRP group.
    regards,
    -amit singh

  • Command to list all email aliases /groups and members on the mail server.

    Hi,
    We are using SJS MEssaging server 6.2 .
    Which is the command to use to list all email aliases/groups and members on the mail server.
    Thanks,

    sureshsamuel wrote:
    We are using SJS MEssaging server 6.2 .
    Which is the command to use to list all email aliases/groups and members on the mail server.Email aliases/groups can exist in text files in the configuration directory of Messaging Server or be defined in the LDAP Directory Server. You can use the "commadmin group search" command to list the ldap groups (if you have Delegated Administration installed/configured), otherwise you can use a directory ldapsearch to find the groups.
    Regards,
    Shane.

  • List users in local admin group on all workstations

    Hi, I created a script that is supposed to query workstations and list all users in the local admin group. I originally used "test-connection" for logging purposes but it caused an issues when the computer responded but dns was incorrect for
    that pc so i would get a false list of local admin members on that workstation. I changed to a wmi query instead and queried the system name using that so If the system name matched the workstation name being queried then write it is supposed to write to a
    csv. For some reason, when i use $wmi.name as the variable, it does not work. What am i missing?
        $CurrentDate = Get-Date
        $CurrentDate = $CurrentDate.ToString('MM-dd-yyyy_hh-mm-ss')
        import-module activedirectory
         $servers= get-content "C:\Scripts\AD Audits\Local Admin\workstations.txt"
         $output = "c:\temp\local admin audit $CurrentDate.csv"
         $results = @()
         $servers | ForEach-Object{
        $wmi = gwmi win32_ComputerSystem -ComputerName $_ -ErrorAction SilentlyContinue
        $connected = Test-Connection $_ -Count 1 -Quiet -ErrorAction SilentlyContinue
        $state = if($wmi.name -eq '$_') {"$_ Verified"} else {"$_ did not respond"}
        $state | Out-File -Append "c:\temp\LocalAdmin log $CurrentDate.txt"
        $group =[ADSI]"WinNT://$_/Administrators,group"
        $members = $group.Members() | ForEach-Object {$_.GetType().InvokeMember("Name", 'GetProperty', $null, $_,   $null) }
        if($wmi)
           New-Object PSObject -Property @{
               DistinguishedName = (Get-ADComputer $_).DistinguishedName
               Server = $_
               Members = $members -join ";"
        } | Export-Csv $Output -NoTypeInformation

    I agree use GP it is more reliable and easier to manage.
    For the sake of demonstration of how this can be don here is how most of us would be likely todo this or a very close variation.
    There is no issue with using Test-Connection and DNS.  AD/DNS cannot have the wrong names or your domain would crash.  Using Get-AdCOmputer instead of a file eliminates stale information.
    $csvfile="c:\temp\local admin audit $([DateTime]::Now.ToString('MM-dd-yyyy_hh-mm-ss')).csv"
    import-module activedirectory
    #adjust Filter as needed
    $adfilter='OperatingSystem -like "Windows 7*" -or OperatingSystem -like "Windows XP*"'
    Get-AdComputer -Filter $adfilter |
    ForEach-Object{
    $props=@{
    Server=$_.Name
    IsAlive=$false
    DistinguishedName=$_.DistinguishedName
    Members=$null
    if(Test-Connection $_.Name -Count 1 -Quiet){
    $props.IsAlive=$true
    $group =[ADSI]"WinNT://$($_.Name)/Administrators,group"
    $members=$group.Members() |
    ForEach-Object{
    $_.GetType().InvokeMember("Name", 'GetProperty', $null, $_, $null)
    $props.Members=$members -join ";"
    New-Object PSObject -Property $props
    } |
    Export-Csv $csvfile -NoTypeInformation
    Use GP and you won't have to be bothered with all of these techy details that usually require a Network Admin to sort out.
    ¯\_(ツ)_/¯

  • How can I use PowerShell 3.0 cmdlets or script to list all the local groups and local users of a server?

    Using PowerShell 3.0 (And if possible the CIM, not WMI cmdlet), how can I script with | out-file C:\<filename>.txt or .csv option to list all local user accounts & local groups
    on remote computers? 
    Thank You!

    I don't recall PowerShell V3 introducing anything new to handle local users and groups. You need to use PowerShell V1 methods, using the [ADSI] accelerator and the WinNT: provider. The scripts linked above show this. No need to use WMI (which would probably
    be slower).
    Here is a script I've used to enumerate all local groups and their members:
    $Computer
    = "MyServer"
    $Computer =
    [ADSI]"WinNT://$Computer"
    $Groups =
    $Computer.psbase.Children | Where {$_.psbase.schemaClassName
    -eq "group"}
    ForEach ($Group
    In $Groups)
        "Group: "
    + $Group.Name
        $Members
    = @($Group.psbase.Invoke("Members"))
        ForEach ($Member
    In $Members)
            $Class
    = $Member.GetType().InvokeMember("Class",
    'GetProperty', $Null,
    $Member, $Null)
            $Name
    = $Member.GetType().InvokeMember("Name",
    'GetProperty', $Null,
    $Member, $Null)
            "-- Member: $Name ($Class)"
    A similar script to enumerate all local users would be:
    $Computer
    = "MyServer"
    $Computer =
    [ADSI]"WinNT://$Computer"
    $Users =
    $Computer.psbase.Children | Where {$_.psbase.schemaClassName
    -eq "user"}
    ForEach ($User
    In $Users)
        "User: "
    + $User.Name
    Richard Mueller - MVP Directory Services

  • How to print/list all the groups/users present in Weblogic using Java code

    Hi,
    Weblogic version : 11.1.1.5
    How to print/list all the groups/users present in Weblogic using Java code
    I want to make a remote connection to Weblogic server and print all the users/groups present in it.
    I have gone through the below mentioned site, but I cannot use the same approach since most of the API' are deprecated for example "weblogic.management.MBeanHome;"
    http://weblogic-wonders.com/weblogic/2010/11/10/list-users-and-groups-in-weblogic-using-jmx/
    Thanks in advance,
    Edited by: 984107 on 05-Feb-2013 05:26
    Edited by: 984107 on 05-Feb-2013 22:59

    see this http://www.techpaste.com/2012/06/managing-user-groups-wlst-scripts-weblogic/
    Hope this helps.

  • How can I query all the members of a group using querbuilder?  I cannot find any related properties

    How can I query all the members of a group using querbuilder?  I cannot find any related properties describing members under /home/groups/s/sample_group in jcr repository.

    Hi,
    FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
    FieldPoint systems are now setup in Measurement and Automation Explorer (MAX).  Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX.  The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
    Regards,
    Hal L.

  • PS-script that can list all clients in a specific collection and if possible, point out direct members...

    CM2012Sp1Cu1 
    Need a powershell-function that can list all the clients in a specific collection, and then somehow define which of them are direct members. The most important thing for me is to list all the members but it would also be great if I could know which ones are
    direct / query members. 
    Very grateful for all the help I can get!
    TWP

    Here is a very simple example via PowerShell and WMI. It requires your collection id, site code and site server as input. It writes as output the collectionmember plus query, or direct.
    $CollectionId = ""
    $SiteCode = ""
    $SiteServer = ""
    $CollectionMembers = Get-WmiObject -Class SMS_FullCollectionMembership -Namespace root/SMS/site_$($SiteCode) -ComputerName $SiteServer -Filter "CollectionId='$CollectionId'"
    foreach ($Member in $CollectionMembers) {
    if ($Collection.IsDirect -eq "True"){
    $MembershipType = "Direct"
    } else {
    $MembershipType = "Query"
    Write-Host $Member.Name $MembershipType
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • DataSource or Crosstab -- List of all Members in the current selection

    Hey Design Studio Experts,
    i need a collection of the  >>current<< member list of a datasource,
    Example: i have the Datasource DS_1, which is filtered by 2-3 filters, so the number of lines, that is delivered by the DS_1 is less than the number of lines in the Query of the DS_1.
    I have checked already the built-in Methods: getData delivers only a Sting (single value), but i need all members of the current selection.
    Thank You in advance.
    Alex

    Nikhil ,
    There are many IDs in the selection, and i need the complete list of them,
    i repeat my requerement again:
    1) WE have query that delivers following lines:
    ID          Color                    Amount
    a               red                              3
    b               blue                            3
    c               Magenta                     1
    d               blue                            10
    2) We set a filter : Filter_1 (Color) = Blue.
    3) After the upper filter got active, we see only two lines:
    ID          Color                    Amount
    b               blue                            3
    d               blue                            10
    As i said im interested in the IDs of the selected lines. So i need a list of values = (b, d)
    meanwhile i think there is now suitable method that delivers the needed result.

Maybe you are looking for