LSMW-Error during processing of BDC session change to material master MM02

I have created an LSMW for changing material master data. I recorded MM02 and using the "select views" screen selected the accounting 2 view and entered the information in the fields on that screen requiring changes. I've set up all of the technical screens for the LSMW. However, when I process the BDC session with "display errors only", the program stops at the select view screen with an error message "Select at least one view". Any ideas how I can process through this screen so that the Accounting 2 screen opens in the BDC session? One further note, I set that selection as a constant in the field mapping and conversion rules screen. The field name recorded as KZSEL_05.

hi
one question how did you choose the view? i mean to ask by scrolling down using mouse or page down.
the scrolling by mouse is not recognized by recording and that may be the error. so whenever you have to go down in screen please use page down not scrolling at least in LSMW.

Similar Messages

Error during processing local bean: localejbs/RfcAFBean

Hi everybody
we currently trying to perform a RFC Call to our developpment system. The scenario is a simple File to RFC Scenario and it worked until yesterday. Since today the Messages stuck in the RFC receiver Adapter with the following errors in the audit log:
MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Exception caught by adapter framework: Exception thrown in method process. The transaction is marked for rollback.
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
The deffaultTrace.trc show the following entries. Looks like an error in localejbs/RfcAFBean:
RfcFunctionName:ZPSCD_INTERFACE_XXXXX
Date : 07/13/2007
Time : 9:32:39:301
Message :
[EXCEPTION]
com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
     at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
     ... 14 more
Severity : Error
Category :
Location : com.sap.engine.services.ejb
Application : sap.com/com.sap.aii.adapter.rfc.app
Thread : SAPEngine_Application_Thread[impl:3]_44
Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BA5D1D27006D000002BF0000653B000435201DA336D6
Source Name : com.sap.engine.services.ejb
Argument Objs : com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
     at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
     ... 14 more
Arguments : com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:118)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264)
     at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.listener.AFWListenerBean.onMessage(AFWListenerBean.java:267)
     at com.sap.aii.af.listener.AFWListenerLocalObjectImpl0_0.onMessage(AFWListenerLocalObjectImpl0_0.java:103)
     at com.sap.aii.af.ra.ms.impl.ServicesImpl.deliver(ServicesImpl.java:306)
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1034)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(ReceiveConsumer.java:392)
     at com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.onMessage(ReceiveConsumer.java:86)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:848)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.NoSuchMethodError: com.sap.aii.af.rfc.core.config.RfcConfigManager.isPPActive(Lcom/sap/aii/af/service/cpa/Channel;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Z
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.isPPActive(RfcAFBean.java:385)
     at com.sap.aii.af.rfc.afcommunication.ejb.RfcAFBean.process(RfcAFBean.java:240)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_0.process(ModuleLocalLocalObjectImpl0_0.java:103)
     ... 14 more
Dsr Component :
Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.engine.services.ejb
ThreadObject : SAPEngine_Application_Thread[impl:3]_44
Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
User : J2EE_GUEST
Date : 07/13/2007
Time : 9:32:39:304
Message : Error during processing local bean: localejbs/RfcAFBean
Severity : Error
Category :
Location : com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(String , ModuleData)
Application : sap.com/com.sap.aii.af.app
Thread : SAPEngine_Application_Thread[impl:3]_44
Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BA5D1D27006D000002C00000653B000435201DA33A4D
Source Name : com.sap.aii.af.mp.ejb.ModuleProcessorBean
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.aii.af.mp.ejb.ModuleProcessorBean
ThreadObject : SAPEngine_Application_Thread[impl:3]_44
Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
User : J2EE_GUEST
Date : 07/13/2007
Time : 9:32:39:306
Message : Rolling back transaction for message 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND) due to: Exception thrown in method process. The transaction is marked for rollback.
Severity : Error
Category :
Location : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer.invokeHandler(QueueMessage, MessageController, Services)
Application :
Thread : SAPEngine_Application_Thread[impl:3]_44
Datasource : 312846850:/usr/sap/XDS/DVEBMGS31/j2ee/cluster/server0/log/defaultTrace.trc
Message ID : 0003BA5D1D27006D000002C10000653B000435201DA341C8
Source Name : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
Argument Objs : 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND),Exception thrown in method process. The transaction is marked for rollback.,
Arguments : 38d82020-3113-11dc-c07b-0003ba5d1d27(INBOUND),Exception thrown in method process. The transaction is marked for rollback.,
Dsr Component :
Dsr Transaction : 3bdbc330311311dcb33b0003ba5d1d27
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives :
Resource Bundlename :
Session : 0
Source : com.sap.aii.af.ra.ms.impl.core.queue.ReceiveConsumer
ThreadObject : SAPEngine_Application_Thread[impl:3]_44
Transaction : SAP J2EE Engine JTA Transaction : [12ffffffa5ffffffaa200435f]
User : J2EE_GUEST
It looks like the JCO Bean has an error. Any Ideas
Regards Oliver

Hi Bhavesh
I found some more interesting log entries and it seems to be a user password problem:
Retries exceded, set message 38f10280-3388-11dc-9c91-0003ba5d1d27(INBOUND) to status NON_DELIVERED.
Name or password is incorrect (repeat logon)
JCoClient connection missingHost:xdsci_XDS_31|AdapterType:MessagingSystem|Sender::FileServer|Receiver::PSCD_CDD|Interface:ZPSCD_INTERFACE_DECLAR_TVA:urn:sap-com:document:sap:rfc:functions|MsgID:38f10280-3388-11dc-9c91-0003ba5d1d27
Is this the user/password of the channel or is it service user for the JCO?
Regards Oliver

There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

Error during creation of info record for pipline material.(Urgent)

Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
Arihanth

Hi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai

BADI name during SAVE after creating or changing a material in MM01and MM02

Hi gurus,
Please refer me BADI name during SAVE after creating or changing a material in MM01and MM02.
Whenever a user changes or creates a meterial ,I want the BADI name at that point.Exit name or Enhancement point will also suffice.Please help..

Hi,
Enhancement: MGA00001
Function module Exit : EXIT_SAPLMGMU_001 Enhancements for Material Master Tables
BADI_MATERIAL_CHECK Enhanced Checks for Material Master Tables
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data

Changes in Material Master leading to issues in MRP

Hi,
For a particular material a user changed a lot of material master data (MRP1 and MRP2 view) within a couple of hours.
As a result MRP is not working as we would expect:
- some orders have no quantity in the "Available quantity" column in MD04 and as a result do not trigger any PO (Received/Required quantity = -1, but Av qty = blank)
- whenever a shipment is foreseen it is consumed/reserved by/for the order which requested delivery date is closest after that shipment date
These are the changes made to the master data in November 2009:
Planning Strategy Group: from Make-To-Stock Production to No Planning to Strategy Group for Spares & Consumables to No Planning to Strategy Group for Spares & Consumables
MRP Group: from Client Specific MRP Group for Period Mgmt to General to External Procurement to Client Specific MRP Group for Period Mgmt to General to Client Specific MRP Group for Period Mgmt
Availabilty Check: from Indiv. Req. to Indiv. Req w/o PO. to Indiv. Req.
Unplanned Consumption in period: from blank to 11.2009
Fwd Consumption Period: from 0 to 999 to 0
Consumption Mode: from blank to Forward Consumption Only to blank
Unchanged MRP material master data:
Bwd Consumption Period: 0
MRP type: MRP
Planning Time Fence: 1
Lot size: WB (weekly lot size)
Procurement type: External Procurement
Backflush: always backflush
What should we do to have MRP work correctly again for this material?
Changes to material master MRP? Delete all schedule lines and start from scratch in SOs?
All help is much appreciated!
Best regards,
Geert
Edited by: Geert P on Dec 10, 2009 6:08 PM
Edited by: Geert P on Dec 14, 2009 4:04 PM

Solved internally by adjusting Strategy Group

Not able to transfer changes in material master (periodic)

Hi Friends,
Got an issue here. I am not able to transfer the changes I made in material master. I want this as periodic, Made the specific setting in CFC9. And for your information 'Activate ALE Change Pointers Generally' and for massege type are activated.
But when I execute CFP1 I got massege: 'No appropriate master data changes: Transfer has not happen'.
I made changes in material master (global level),..like gross weight changed. Material is in active IM, no duplication.
Any help Please? We are on SCM 7.0.
Thanks,
Satyajit
Edited by: Satyajit Patra on Mar 20, 2010 9:12 PM
OK, Guys I think I need to raise an OOS... It was for SCM 7.0, but was basic config....thts why I edited the thread so many times expecting some responce.
Edited by: Satyajit Patra on Mar 22, 2010 7:41 AM

Hi Satyajit,
Please look at OSS Note 1069560 - Data inconsistencies: Activating integration. models in parallel, if this helps you.
Since Gross data of material is in the basic view, it is common across plants , whereas, IMs are normally designed to have material masters at plant level.
We may have same material in different IMs with different plants. Therefore changes of the basic view fields are then contained in multiple IMs. SAP advises to have a larger IM or sequential activation of IMs.
I hope this will help you .
Regards
Datta

RMDATIND program - used for change the Material Master

Hi Experts,
Could please confirm whether using RMDATIND program can we change the Material master data?...
Thanks
R P R kumaar

Execute this program and you can find an information icon in the toolbar. press that icon. you will complete documentation regarding this program
a®

PuP price not changed in Material master

Hello All experts
I have one question about the material ledger related transaciton, I have a Material with 2+V (price deter. and price control) setting in Material master data in Accounting 1 TAB. And material ledger is active for this material, the Periodic Unit price is 1 USD in current period and stock is 0.
One PO posted for this Material for purchase with actual price 100 USD, and 101 movement type with special stock indicator E was used in Goods receipt posting. I think these stock will be treated as valuated sales order stock. But GR posting didn't trigger any PuP price change in Material master. Is that situation normal? Pls kindly help.

With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.

URGENT - HOW TO PROCESS A BDC SESSION (IN BACKGROUND) FROM INSIDE A REPORT

Hi All,
I have a requirement wherein I need to create a BDC session for mass update(from file) of one transaction and check if at all that update has taken place and proceed with the same session for another transaction.
For this I need to know how to process the session in background in a report, so that if the processing is done, the next set of data to update a different transaction can happen.
All inputs are welcome and highly valuable to me.
If someone is unable to intrepret this, I'll detail it again.
Thanks in advance,
Vaishnavi Varadarajan

Hi,
1.Use RSBDCDRU is an exe pg.With this u can download the logs into local file.
2.It will create the spool request .from there u can download or print.
OtherWise:
Use the code from the link below. U need to provide the session queue id as input and it will download the log to an excel file. U can change it to ur reqmt.
Re: BDC
regards
kiran

"Error in Process" for POs after changing Tax codes and Vendor address

All,
We are in extended classic scenario and we have 2 POs with status "Error in Process"
PO 1:
The PO was ordered with 3 line items, Confirmed, Inovoiced. Later our accoutnig team realized there should not be tax for one of the line item in the PO. So they created Credit memo and asked our purchasing dept. to change PO from Taxable to Tax except.
Now the porblem is, when PO chages to tax except in SRM, it is going to "Error in Process".
What could be the reason?
PO 2:
The PO have 10 line items and Confirmed, No invoice is generated.
Now the Purchsing want to change vendor address in the PO, they changed the vendor address in the PO.
Now the porblem is, when PO changes in SRM, it is going to "Error in Process".
I checked the RZ20 Traansaction in SRM, both POs have same errors:
Backend application errors "Indicator for GR-based invoice verification used not allowed"*
We removed 'Confirm Performance of Service/Goods Receipt' tick mark for the PO in SRM under follow on documents and it is throwing error saying it must be checked.
Did any one got this error, what i need to check for this errors?. any help?
Thanks
Rams

Hi,
Once the PO is created . Confirmation made and invoice .Tax change will not be allowed.
First reverse the Invoice.
Cancel the confirmation
then change in the P.O
Do the Confirmation and invoice it will allow
Regards
G.Ganesh Kumar

Lsmw Error during the specify files

While doing Material master upload thru lsmw...using Batch input method
During the specify files step i am getting this error
File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028
Pls Guide me.......

Hi,
How you save your source file? Need to be saved in as TAB delimited file
OK. Check link:
http://www.sap123.com/a/98/#loading-material-masters-with-lsmw-direct-input-method
http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench
Regards,
Biju K

Unauthorized Error during Processing Outbound Message in XI

I have configured a scenario that whenever there is a file of certain filename it will trigger one of the out bound message.
But the following error occured during processing of the out bound message:
Error Msg: Failed to transmit message due to Unauthorized
May I know how/where to set the acess right?
StackTrace is as follow:
find . -type f -exec grep "61abff41-dd01-11dc-c53d-001a4b053868" /dev/null {} \;
./defaultTrace.3.trc:#1.5#001A4B053868006E0000001600004E4900044651CF729F25#1203217093532#com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer##com.sap.aii.af.ra.ms.impl.core.queue.SendConsumer.onMessage(QueueMessage, boolean)#J2EE_GUEST#0####2d915860dd0411dccdbb001a4b053868#SAPEngine_Application_Thread[impl:3]_116##0#0#Error##Java###Failed to transmit message due to .#2#61abff41-dd01-11dc-c53d-001a4b053868(OUTBOUND)#com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized#

Hi,
>>I have configured a scenario that whenever there is a file of certain filename it will trigger one of the out bound message.
What does it mean
Procedure to trigger any of the interface.
1) Develop IR Objects according to the scenario
2) Develop ID objects according to the scenario.
3) In the Sender Communication channel Specify the name of the file and the Source directory that the outbound interface shld pick to process it in XI
4)In the Rec Channel Similarly specify the name of the file and the Target directory to place the file.
If u specify the file name in the sender channel means according to that file name corresponding interface will be run.
Regards
Seshagiri

Error message during Base unit change in material master

Hi
I am getting error message " Independent requirements are already assigned to the
material" when doing change in base unit in material master.
But I do not find any independent requiement for the plant in t code MD04.
Can anybody help me to get a solution for this?
Thanks in advance
Pradipta Sahoo

Hi
Thaks for your reply.
I checked in MD63 and don't find any entry. That makes me suprprise why the error shows as an independent requirement entry exists.
Please reply if you can further help me in this matter to solve this.
Kind regards
Pradipta Sahoo

Change of material master during transfer between SRM and R/3

Hi,
I have a question for modifying material master data between R/3 and SRM.
I would like to know if it is possible to change the material number during the transfer. The reason is:
I have 2 R/3 backends and 1 SRM system. The material codes in the 2 R/3 systems are different but some materials having different numbers in R/3 are referring to the same material. I want to see such materials with the same material number. Is it possible to do this with Middleware plus some interruption in between? The "translation" should be bi-directional.
Thanks

Hi,
No probs if the field is not replicated.No idea how to bring that through replication though.
Coming to the Product Search...Although the number of such materials is less...You will have to modify the Product search which will take care of the display of other products as well.
The Std product search(<b>bbph_product</b>) uses the the search help exit "<b>BBP_F4IF_SHLP_EXIT_PRODUCT_GEN</b>".So you need to replace this one with your custom FM.
In your custom FM,you will have to check for the HARMINIZED code field for all such materials and accordingly while selecting the Material select the HARMONIZED code as the Material number and in the Product search display that HARMONIZED code as the "PRODUCT ID". Also,you will have to develop RFC enabled FM which will actually fetch all the Materials from the BAckend at runtime. Also are you displaying the Product List Plantwise?
Pls give me ur mail ID where i can mail you the sample code.
BR,
Disha.
Pls reward points for helpful answers.

LSMW-Error during processing of BDC session change to material master MM02

Similar Messages

Maybe you are looking for