LSMW F01

Hi experts,
I would like to create Direct Input program for financial documents (0100) but I've problem with date conversion. BLDAT and BUDAT in text file are in YYYYMMDD format, MONAT is filled from rule, value is correct (06). When I run program I got message:
Posting period 011 0621 is not open (date is 20110621). How it should be converted?
Thanks in advance.
Paul Smuda

Hi,
Check your user profile date format. what you have given in LSMW and in your user profile should be same as per me.
check it if it works give me some points
BR:
Venkat.Gurram

Similar Messages

  • Material PO text upload through LSMW

    Dear All,
    I have uploaded all the material using LSMW . I have used Direct Input Method. But how can i upload the material PO text. Since it does not get stored in any field , i cannot map in field mapping.
    Please suggest how to upload material PO text
    Thanks
    John

    For long text, you need to use object 0001. To link it to the PO, please create the long texts for 1 PO manually and see the values.
    For your reference, for header texts, the text name is the PO number and the text ID is the long text - for example F01 is Header Text, F02 is Header note, etc (you can see this in configuration).
    For item texts, the text name is the PO number and item number.
    You need to upload the texts separately.
    Lakshman

  • Logical filename and logical path in lsmw

    Hi all,
           I am doing a lsmw for purchasing info record . i created a logicalpath and assigned a physical path to that . i created a logical filename and assigned the logical path .but when i assign that to the lsmw it is throwing error as 'LOGICAL PATH DOES NOT POINT TO PHYSICAL DIRECTORY' .
    can anybody provide a solution for that .
    Thanks & regards
      Magesh anandan

    hi ,
      goto the tcode file then u find the relation between the logical and physical paths ...and their assignment..
    hope it will helps u..
    regards,
    venkat.

  • LSMW  - Open Sales Orders

    Hello  Friends
    I want to find if anybody can guide me on how to get all open sales order tables , i want to create a format and create a flat file for uplodading the file , for this what do i need and how do i do it.
    Also for creating LSWM can i use the existing one which i can just Assign the New file to the existing one .
    Regards.

    Dear Mehmood,
    I want to find if anybody can guide me on how to get all open sales order tables
    You want to extract all the open sales orders- which you can get from Table:VBUP key in overall document status in selection screen ( You can use VBUK also- but if there are certain sales orders in which some of the items are completed or few of them open, using VBUK - you will not get exact records)
    Secondly, you can get the data by using Query also- in SQVI
    design a query with VBAK / VBAP & VBUP
    so that from VBAK you can give time period & sales area details
    from VBAP - you can enter plant relevant details to filter certain records & item category as well
    where as VBUP- filter wth the status.
    once downloaded store in flat file.
    Now Create LSMW object by using batch input recording method. after mapping the relevant fields,
    prepare the flat file in such a - it suits to the upload file / recording file. then you can upload the already downloaded n stored open sales orders in flat file.
    Hope this is what you are looking for.
    Regards,
    ReazuddinMD

  • Error while creating a LSMW

    Hi,
    I have created a LSMW for updating sales office in the Sales order by using Direct input method.
    While specify files;I specified the file saved in the Desktop.While saving I get an error saying 'Logical path is not specified'.
    Can anyone tell me why this error occurs and how to rectify this??
    Thanks in Advance.
    Thanks&Regards,
    Sophia Xavier

    HI
    Place the cursor on "legacy data" and click on "create" option.
    You will get one screen. There, you have input box called "FILE". By selecting drop box or pressing F4 on that, you will get all folders, files available at ur PC.
    Search for you file, and double click on ur file. Next give all mandatory information in that screen. Finally press ok and save your "specify screens". It can be saved.
    Reward if it is useful.
    Thanks.
    Siva kumar

  • Creation of partner functions for customer master with LSMW

    Hello,
    I try to create partner functions together with a customer via Batch Input in LSMW.
    Object: 0050, method: 0000, program name: RFBIDE00, program type: B.
    I use the structure BKNVP (Customer master partner functions) to create a new partner and set values for the fields KTONR and PARVW.
    When I start the batch input the fields are filled in correctly in a new dynpro. After the confirmation of these values the dynpro changes back to the partner functions sscreen, but the value for KTONR isn'n being transferred. So I get an error message.
    Is it only possible to update partner functions with that BI or what is going wrong ?
    Thanks in advance and regards
    Alex

    Hi Alex,
    Could you specify what error message you are getting?
    Thanks!
    Rudra

  • Error in Creation of Purchase Requisition through LSMW

    Hi
      I am trying to craete a PR upload prog through LSMW batch input method. In the Specify File option I am giving the TXT file destination.The TXT file is saved at my desktop. But while saving it is givving an error as "No logical path has been specified", Message no. /SAPDMC/LSMW_OBJ_060046
    If anyone can help me out.

    Hi,
    I would suggest to create a new one for this as file is placed on your desktop. But you can refer the standard one with which you will get the idea for creation:
    Standard logical file name for this is: MM_PURCHASING_REQUISITIONS
    In this file location is default in location /usr/sap/trans/data/mmrequisitions, instead of this you can give your converted data file name from step 7 Specify file for e.g PROJECT00_CUTOVER_MB1C_1.lsmw.conv
    You can refer or use standard logical path LOCAL_TEMPORARY_FILES for this scene.
    Hope this solves your problem.
    Regards,
    Brajvir

  • Creation Of LSMW for Actions..........

    Dear ALL
    Recorded an LSMW for PA40 hiring actions which includes infogroup - [ IT 0000, 0001, 0002, 0105-ZVEN (Sub type)]
    This is for external vendor employees hiring actions.
    While recording or manually running the process, it is working fine.
    When in foregroud or background process, the alternate pernr is getting generated. Say for 1st record , pernr generated is 80023, then for next it is 80025, 80027so on.
    Kindly suggest me in this issue.
    Thanks
    MJ

    Hi,
    1-you keep no range as external and assign PERNR sequentially so that it remains same as you want it
    2-kindly go through the LSMW abain to see what have you assigned in field mapping & conversion rules
    3- check one record created thru LSMW and see if next (alternate number gets assigned to Ref PERNR in IT0000)
    Check the alternate number to see if anything gets assigned to it.
    salil

  • Using a Logical File definition in LSMW

    Hi all,
    is there any way that we can use a Logical File (defined in transaction FILE) as an application server file in the "specify files" step, instead of having to enter the physical path/file?
    Thanks in advance,
    Justin

    Hello,
    Check pages 46 and 47 of the following document :
    [http://sapabap.iespana.es/manuales/pdf/lsmw.pdf|http://sapabap.iespana.es/manuales/pdf/lsmw.pdf]
    You can only use a logical filename for subsequent programs (example direct input programs) not for the actual input file of your LSMW.
    Wim

  • LSMW: Error concerning the logical path in Specify Files step

    Hi,
    I am trying on an ECC 6.0 EHP6 system to upload (open) POs from an existing SAP ERP system. Since I faced some complications in batch input recording method, I decided to go with the standard batch/direct input method.
    I selected object 0085 (Purchase Order) and method 0001 (Purchase Order). The program that is used is RM06EEI0. I followed all the usual steps, but in the "Specify Files" step I get the message:
    '****.lsmw.conv' does not exist; edit the logical path using transaction FILE
    Being aware of both the FILE and SF01 transactions, I created the logical path and file (through the FILE transaction). However, after the modification, I get the message:
    Logical file '****' is not assigned to physical file '****.lsmw.conv'
    There is also the related SAP Note 753511 (Logical and physical path and file name in transaction LSMW) that refers to this case.

    Hi,
    Click on specify file radio button>Legacy data-on the PC Front end
    where input file location like C:\mydocument\desktop\test.txt
    and give input in Name field: mydocument
    in delimiter section > select Tabular
    File structure section> tick on Field order matches source structure definition
    File type: Record end marker(Text file)
    then press enter key and other steps as same.
    Second thing you said that you have used Batch input recording
    after creation and recording finish , scroll the page below on recording and put a cursor unwanted field and remove unwanted input field.
    I hope your problem will resolve. you can find the steps pdf on Google search try now.
    Thanks
    Sanjeet Kumar

  • How to set dynamic file path in LSMW

    I am working on LSMW  object to upload say excel file from my desktop.. if someone runs my lsmw application on their system obviously it fails.. is there way where I can dynamically set the path..I mean whomsoever runs the application it picks the file from their location and execute the program.

    hi,,,
    change your code accordingly
    here i am  inserting data into ztable from excel .
    *& Report  ZBI_UPLOAD_DATA_MAST                                             *
    REPORT  zbi_upload_data_mast                        .
    DATA : it_tab TYPE filetable,
           gd_subrc TYPE i.
    TYPES : BEGIN OF wa_wrkctr,
            fictr TYPE zbi_fictr_mast-fictr,
            prctr TYPE zbi_fictr_mast-prctr,
            type TYPE zbi_fictr_mast-type,
            END OF wa_wrkctr.
    DATA : wa_save TYPE zbi_fictr_mast.
    DATA : gd_scol   TYPE i VALUE '1',
           gd_srow   TYPE i VALUE '1',
           gd_ecol   TYPE i VALUE '256',
           gd_erow   TYPE i VALUE '65536'.
    DATA : it_datatab TYPE STANDARD TABLE OF wa_wrkctr WITH HEADER LINE INITIAL SIZE 0.
          it_phy_data TYPE STANDARD TABLE OF wa_energy WITH HEADER LINE INITIAL SIZE 0.
    *data : w_current_inv_no(5) TYPE n,
          w_pop_up_text LIKE  wfcsr_ui_popup_text.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS:  p_file LIKE rlgrap-filename OBLIGATORY
                 DEFAULT 'C:\Physical Stock.xls'  .
    SELECTION-SCREEN END OF BLOCK b1.
    AT SELECTION-SCREEN
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          window_title            = 'Select File Name'
          default_extension       = '*.xls'
          default_filename        = '*.xls'
          file_filter             = '*.xls'
          initial_directory       = 'c:\'
       MULTISELECTION          =
       WITH_ENCODING           =
        CHANGING
          file_table              = it_tab
          rc                      = gd_subrc.
       USER_ACTION             =
       FILE_ENCODING           =
    EXCEPTIONS
       FILE_OPEN_DIALOG_FAILED = 1
       CNTL_ERROR              = 2
       ERROR_NO_GUI            = 3
       NOT_SUPPORTED_BY_GUI    = 4
       others                  = 5
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        READ TABLE it_tab INTO p_file INDEX 1.
      ENDIF.
    START-OF-SELECTION.
    START-OF-SELECTION.
      PERFORM upload_excel_file TABLES   it_datatab
                                 USING   p_file
                                         gd_scol
                                         gd_srow
                                         gd_ecol
                                         gd_erow.
    PERFORM eventtab_build CHANGING lt_eventtab.
    PERFORM display_data.
    *&      Form  UPLOAD_EXCEL_FILE
          text
         -->P_IT_DATATAB  text
         -->P_P_FILE  text
         -->P_GD_SCOL  text
         -->P_GD_SROW  text
         -->P_GD_ECOL  text
         -->P_GD_EROW  text
    FORM upload_excel_file  TABLES   p_it_datatab
                            USING    p_file
                                     p_scol
                                     p_srow
                                     p_ecol
                                     p_erow.
      DATA : lt_intern TYPE  kcde_cells OCCURS 0 WITH HEADER LINE.
    Has the following format:
                Row number   | Colum Number   |   Value
         i.e.     1                 1             Name1
                  2                 1             Joe
      DATA : ld_index TYPE i.
      FIELD-SYMBOLS : <fs>.
    Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
        EXPORTING
          filename                = p_file
          i_begin_col             = p_scol
          i_begin_row             = p_srow
          i_end_col               = p_ecol
          i_end_row               = p_erow
        TABLES
          intern                  = lt_intern
        EXCEPTIONS
          inconsistent_parameters = 1
          upload_ole              = 2
          OTHERS                  = 3.
      IF sy-subrc <> 0.
        FORMAT COLOR COL_BACKGROUND INTENSIFIED.
        WRITE:/ 'Error Uploading file'.
        EXIT.
      ENDIF.
      IF lt_intern[] IS INITIAL.
        FORMAT COLOR COL_BACKGROUND INTENSIFIED.
        WRITE:/ 'No Data Uploaded'.
        EXIT.
      ELSE.
        SORT lt_intern BY row col.
        LOOP AT lt_intern.
          MOVE lt_intern-col TO ld_index.
          ASSIGN COMPONENT ld_index OF STRUCTURE it_datatab TO <fs>.
          MOVE lt_intern-value TO <fs>.
          AT END OF row.
            APPEND it_datatab.
            CLEAR it_datatab.
          ENDAT.
        ENDLOOP.
      ENDIF.
      IF it_datatab[] IS NOT INITIAL.
        DELETE FROM zbi_fictr_mast.
        COMMIT WORK.
        LOOP AT it_datatab.
          wa_save-fictr = it_datatab-fictr.
          wa_save-prctr = it_datatab-prctr.
          wa_save-type  = it_datatab-type.
          INSERT INTO zbi_fictr_mast VALUES wa_save.
          IF sy-subrc = 0.
            COMMIT WORK.
            MESSAGE 'Data upload complete' TYPE 'S'.
          ENDIF.
          CLEAR wa_save.
          CLEAR it_datatab.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    " UPLOAD_EXCEL_FILE
    i hope this will help .
    Regards
    Deepak

  • Logical path in lsmw

    hi friends,
    i have been uploading using the direct input method in lsmw.it is requiring the logical path and the logical file to be given.i tried to create them using the transaction FILE.but while using that in LSMW it is giving error stating that logical path doesn't point to the physical directory.can any how let me know how to create a logical file and logical path.
    thanks in advance.
    -senthilkumar

    hi ,
      goto the tcode file then u find the relation between the logical and physical paths ...and their assignment..
    hope it will helps u..
    regards,
    venkat.

  • Runtime error in LSMW to create Material Master

    Hi all,
    I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
    "A RAISE statement in the program "SAPLMG25" raised the exception
    condition "NOT_FOUND".
    Since the exception was not intercepted by a superior
    program, processing was terminated."
    I have checked all the steps of lsmw. Any idea why this specific error is coming?

    Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.

  • Error while uploading the file from Allpcation server in LSMW-7th step

    Hi Experts,
    what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
    Thanks in advance,
    KSR

    Hi
    I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
    Is there any specific CODE PAGE to be maintained...
    Thanks in advance
    Oarsk

  • CAN we upload data periodically in LSMW?

    HI Expert,
                     In LSMW , maintain object attributes step , there is periodic option if we select that option then  would the data transfer periodically?How does it differ from periodic in BDC?
    LSMW we can not schedule  updation write?
    we have extracting data from legacy system into flat file
    now we want to map legacy format  data into inputfile ( sap format data). how could we do that?
    Further i have to use BAPI to upload

    To a limited extent, the LSM Workbench also supports periodic data transfer. Preconditions are:
    u2022     The LSMW object has been created and tested completely.
    u2022     The "source application" periodically makes available one or several files on the SAP application server.
    u2022     The LSMW object does not access files on the frontend. (Files on the frontend cannot be read in batch mode.)
    If all these conditions are met, you can set select button "Periodic" in step "Maintain object attributes". Then, step "Control program for periodic data transfer" is displayed in the overview of work steps. This program carries out the following steps in sequence:
         Read data
         Convert data
         Import data
    This program (name: /SAPDMC/SAP_LSMW_INTERFACE) can be used according to your requirements.

Maybe you are looking for