LSMW Failed Records

Hi,
We ran a LSMW to change Product Hierarchy for 33000 materials. Now out of those 2500 records failed. Is there any way to get a file of those failed records?
We tried SM35 and SM37 but no go.
Regards,
Ajit

Hi Ajit
Once you run the session we can see the error records in sm35, as you know that.
GO to sm35 in that select the job and click on analysis-> incorrect.
so now you will get the failed records index numbers.
Now go to LSMW and choose the step display read data.
Now you will see all the data that you uploaded with index numbers. For first record it will be one and for next record it will be 2 etc.
Now here goto to menuoptions->import data-> save to pc file.
Now you can save all the records in the xl. Now delete the records with the error index numbers( which you got in sm35).
So you need to do some xl sheet work here for this.
Else other option is writting the bdc program, there we can directly collect the error records through the program.
Hope it will help you to some extent
Regards,
Vvieks

Similar Messages

  • Need a way to start the package from the point of failed record

    Hi,
    I have a package which loads billions of records, the problem i am having is when it fails after 1 billion record have to start from the beginning. Is there a way where I can start my load process from the failed record instead of starting from the beginning.
    Thanks in advance

    Simply implementing checkpoint wont restart package from the failed record onwards. It depends on how you do data transfer. For example if its a data flow task and if its an intermediate step that fails, then it wont start from failed record onwards next
    time.
    A much better option would be to implement it like this. Have a OnError event handler for the task and inside that use execute sql task to populate a control table with the max key/timestamp value of record which has been extracted. 
    Each time check if table has a entry and if present take max date/key value from it. Use the value to filter the source data to take only records with value > fetched value to start from next record onwards.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Report off failed records

    Hello,
    I use with a lot of scenarios, some off them from file to BW, some of them from RFC to file and more.
    for example when i received massage with 100 records and 3 off them failed.
    I want to send massage for the sender with report of all the failed records.
    Regards
    Elad

    Hi,
    As Michal said, there are many ways..
    If you are palnning to use RFC with Sync call, you can send the Error records as a response to XI and then send it to Sender. But it is not advisable to make sync call, if it is huge data.
    Else, you can plan this error handling in the Mapping.
    Also check these doc to get some more info-
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0
    http://help.sap.com/saphelp_nw04/helpdata/en/56/b46c3c8bb3d73ee10000000a114084/content.htm
    Regards,
    Moorthy

  • If data loading fails records should ROLLBACK and only error records .....

    Hi All,
    In my process data loading from source to target,for example iam loading 100 records ,in that 50th record having error,once the error record occured total loading process want to fail, records needs to rollback and error record need to move error table....any one can you guide on this process...
    Thanks in advance....

    30021986 wrote:
    Hi All,
    In my process data loading from source to target,for example iam loading 100 records ,in that 50th record having error,once the error record occured total loading process want to fail, records needs to rollback and error record need to move error table....any one can you guide on this process...
    Thanks in advance....Hi ,
    Test this ..
    Set flow control to YES
    Set Maximum number of errors allowed to 0 (zero)
    Run the interface

  • TCS fails recording from MCU

    Hi all,
    I found TCS fails recording from MCU when I use 2 Byte characters for MCU H.323 ID.
    (Home > Settings > H.323  >(Mandatory) H.323 ID to register )
    In that case, we can call and record conferences when we call MCU from TCS using conference's E.164 number.
    But we can't record conferences when we call TCS from MCU using TCS's E.164 number.
    (During failed recording, TCS outputs error log "Error: Calling stored procedure, Stored procedure error occurred [stored_procedure_error = XML parsing: line 1, character 66, whitespace expected] - Continuing")
    This issue can be resolved simply excluding 2 Byte characters from H.323 ID of MCU.
    But our customer needs to use 2 Byte characters, so is there any way to do so?
    VCS-C   X8.2.1
    TCS v6.0
    MCU5310 4.5(1.45)
    Best Regards,
    Kotaro

    I think I get it now. The hype. Not the scary hype. Not the news articles that say attendees should only use pencil and paper or “burner phones.” What is this, The Wire? I looked all over for Marlo and Stringer and Fuzzy Dunlop and didn’t see them anywhere.What I did see was a killer keynote that made the kind of sense we rarely see in mass media. I saw technical presentations that simultaneously put my mind at ease and made me wary of what is inevitably around the corner. I saw a couple of sessions that were pretty dull but also packed with the kind of important information that will change my behavior once I get back out in The World (especiallyhow I treat my Mac… you know… because nobody hacks Macs, right?)The amazing part is that all of the diverse ideas I was exposed to today seemed to magically coalesce into a unified, albeit...

  • LSMW ME41 Recording

    Hi experts,
    Is it possible to use LSMW thorugh recording For ME41(Purchase Quotation)tcode for multiple items?
    if so how to do it? please explain  how lsmw work for multiple header and multiple items in one legacy text file.
    Thanks & Regrads,
    Rao

    Hi,
    correct me if i am wrong here, are you telling me you are not able to fill items more than what the screen is able to display in the table control.
    if that is the case why dont you use NEW button the application toolbar, so no matter how many items have already present in the RFQ, the table control will position the new item in the second line. So to add a new item click the new button and add the item at the second line, this should solve your problems no matter how many items need to be created.
    In recording when u record it for adding one item, you need to loop at your table containing the indicator of item type and call the code repeatedly to add all items.
    Hope that throws some light, let  me know if you need some  more details.

  • LSMW Batch recording

    Dear All,
    I am uploading stock using LSMW batch recording .I want to create only one material document for all the material stock upload.What is the procedure I have to follow.
    Please advice
    Thanks

    I doupt that this is possible, because of a technical limit in the accounting document.
    Accounting document can only have 999 items,
    Each material document item can create several accounting document items, because of this a physical inventory docuemnt is limited to 300 items.
    So you should at least create a new material document after 300 items to avoid a posting failure.
    Further recording is the worst method, which should only be used if no SAP given import method is present. for material movements you have standard/direct input and IDOC and BAPI methods  ready for use .
    In a static recording  you probably get already issues to enter more items than your first screen allows . In SAP given import methods you can just transfer records and count them and do a transfer_transactio when 300 items are reached.

  • LSMW fails when run in B/G works fine in Frontend..why?

    Hi All,
    i am trying to runa batch process by LSMW, my files are accurate, no problem with them, everything works fine but it fails when run in BG..works absolutely fine in front end. whats the diff with running in B/G?
    same thing happens when i am trying to execute an RFC thru SAP JCO, it works when debugger is on 9i guess switching on debugger is similar to running in B/G) but it doesnt work when debugger is off. but when i execute that RFC directly in se37 from SAP gui it works fine..fails when connected to JCO..
    i am not having this issue with r/3 4.6c or mySAP ECC.6.0  i have this issue only in r/3 4.7.
    has anyone faced the similar situtaion? pls help.
    thanks.
    p.s if this may help. the RFC and LSMW error both are pertaining to change in address of US employees.( infotype 0006)

    for LSMW its the recording of transaction PA40 (employee hire fails when filling  address details) and PA30 (change address) and same is the case with RFC..well its a BAPI_ADDRESSEMPUS_CHANGE. 
    To eloborate more..the error is..Fill in all the mandatory fields.
    which i am very much doing..there are no hidden fields or anything..i have seen the screens etc..I AM filling all mandatory fields. infact i am not leaving anything unfilled., same scrren is going fine when in front end..i am just clicking ok..ok..ok and boom transaction complete..no complaints. but running B/G is killing me.
    i have to run batch for 100,000 employees
    What fails my logic is..its working fine in 4.6c and mySAP ECC.6.0 but not in 4.7
            Hruser
    Message was edited by:
            Hruser

  • LSMW error records

    Hi,
    One basic doubt..when we use LSMW for conversion of huge amount of any data.For e.g if we have 1000 Customer Master records in the input file. After running the LSMW, if many posted successfully and if few fail due to data error, how will trace the error records? How can we get those error records alone, to send it back to the Legacy system, for them to correct and resend those records again?
    And how else can we avoid duplication?
    Thanks
    Swetha.

    You can use the Report RSBDC_PROTOCOL to get the log of the session.
    One thing you can do is, run the same session again with the mode "Error only". System will stop at the errors. Correct those errors manually.
    Regards,
    Naimesh Patel

  • How to update more than one Bank data in LSMW using recording

    Hi friends,
    please let me know how can we upload more than one bank data for vendore master in LSMW, and i am Using Recording and i have to use that.
    thanks a lot.
    Regards,
    veeru.

    Hi
    I have used the direct input but, there are address fields missing in the direct input like, SORT2, MOB_NUMBER, SMTP_ADDR. these fields.
    when i see the documentation for direct input, it says for additional address you need to use another BAPI. but here the problem is we are using internal numbering for vendor, so how to link the created vendor and the address uploaded to correct vendor.
    thanks a lot,.

  • ME01 LSMW multiple record for same material issue.

    Hi Experts,
    I have an issue with multiple record for the same material and plant when I upload the data from the file.  Lets I have the records.
    Material        Plant              Start date      Enddate        Vendor          Porg.
    1     0010     20060101     99991231     2     0010
    1     0010     20060101     99991231     3     0010
    When I upload the above data there are 2 IDOCs created when I am using the method LSMW-IDOC method, but only last record is getting updated and the first one is not getting updated in ME01 souce list. But I am getting the success message for both IDOC in LSMW. So I am not sure how to fix this why only last record is updated and not other records??

    why do you have 2 idocs?
    wouldn't be 1 idoc with 2 items be more logical?
    1 record in structure E1EORDH
    and 2 records in structure E1EORDM
    I believe your 2 IDOCs get posted, but I think your 2nd Idoc overwrites the values entered from the first IDOC.

  • LSMW Fails when run in B/G but works fine in Front end..why?

    Hi All,
    i am trying to run a batch process by LSMW, my files are accurate, no problem with them, everything works fine but it fails when run in BG..works absolutely fine in front end. whats the diff with running in B/G?
    same thing happens when i am trying to execute an RFC thru SAP JCO, it works when debugger is on (i guess switching on debugger is similar to running in B/G) but it doesnt work when debugger is off. but when i execute that RFC directly in se37 from SAP gui it works fine..fails when connected to JCO..
    i am not having this issue with r/3 4.6c or mySAP ECC.6.0  i have this issue only in r/3 4.7.
    has anyone faced the similar situtaion? pls help.
    thanks.
    p.s if this may help. the RFC and LSMW error both are pertaining to change in address of US employees.( infotype 0006)

    Applying  SAP note 928273 Solved this issue.

  • LSMW fails when run in B/G but works in Frontend..why?

    Hi All,
    i am trying to runa batch process by LSMW, my files are accurate, no problem with them, everything works fine but it fails when run in BG..works absolutely fine in front end. whats the diff with running in B/G?
    same thing happens when i am trying to execute an RFC thru SAP JCO, it works when debugger is on 9i guess switching on debugger is similar to running in B/G) but it doesnt work when debugger is off. but when i execute that RFC directly in se37 from SAP gui it works fine..fails when connected to JCO..
    i am not having this issue with r/3 4.6c or mySAP ECC.6.0  i have this issue only in r/3 4.7.
    has anyone faced the similar situtaion? pls help.
    thanks.
    p.s if this may help. the RFC and LSMW error both are pertaining to change in address of US employees.( infotype 0006)

    Applying SAP note 928273 Solved this issue.
    thank you.

  • LSMW using Recording

    Hi,
    I am trying to upload Regional structure using LSMW. I have recorded transaction SR10 (Create City) but I am not sure how to proceed further. What changes I need to do in the recording and what should be the target structure for that.
    If anybody can tell how to use the recording it'll be a great help.
    Thanks.
    Jashan

    While recording you should place the cursor on all the fields you need to fill (filling them) and using the transaction SR10 as normal for creating a city. Once you save it the record will be done and you'll have all the fields of the target structure that you will need to map from the source file.
    However I'll suggest you to use within the LSMW the standard Regional Structure upload program instead of your own recording. The standard one works perfectly.
    Cheers,
    Aubin

  • List recipe (tx. c201) in lsmw using recording method

    Hi.
    I'm trying to upload master data for recipe list (tx c201), and I'm not so sure which method I should use, i tried with an standard object but it works with idocs and i supposed to configure a lot of stuffs (ibounds, ports, etc), and using recording... how can i handle controls tables when the number of items it's variable?.
    Reading through the sdn i realized that it's good to work with two files, one with master data and the second one with detail or item data. Actually i used that method to upload data in lsmw but using a standard direct input program and works pretty good..., but using a recording I don't know how to handle this.
    Thanks in advance,
    Regards.
    Albio.-
    Message was edited by: Albio Vivas
    Message was edited by: Albio Vivas

    Get your test data from functional folks then do the recording based on that. After done with the recording you may delete the existing values(which are used for recording). This is because, for example say you are having the data in an EXCEL sheet and for a particular customer one of the fields is empty. In this case, the DB will be updated with the value provided in the recording.

Maybe you are looking for