LSMW for Asset Creation not creating Transaction

Hi,
I am using standard LSMW for creating Asset into the SAP system and passing transaction code as AS91.
Object: 0160
Method: 0001
Program Name: RAALTD01
Program Type: B
The asset is getting created, but even after passing the Transaction Data (Structure BALTB), with T-Code AS91, it is not creating the transaction record into Asset.
Any solution / work around for this?
Thanks & Regards,
Sandip kamdar

try with recording method, i had done this for same tcode and sucessfully completed the job.

Similar Messages

LSMW for Asset Data (Tcode-AS01)

Hello All,
I am working on LSMW for Asset master data creation for transaction AS01. When i go to tcode AS01 there is a field with description called "NUMBER OF SIMILAR ASSETS". The LSMW program for the asset data uses two structures BALTD and BALTB. But the field description field is not available in these stuctures. So i am not able to create asset data through t code AS01.
Can anybody help me out. I will reward you with points.
Thanks,

Hi,
The number of similar assets
enables you to create multiple similar assets in one master transaction. These assets initially differ from each other only by their main and/or sub-number. When you save, you can also enter a description and inventory number for each individual master record.
This function does not allow you to create multiple assets that automatically have the same long text.
In order to work with lsmw you are creating asset in reference to old asset number/subnumber. i think the default number of assets are 1. in case you require more assets to be created of same type you may have to pass different long texts.
Reward if find useful.

User Exit / Badi / BTE for Asset creation A ?

Hi Experts,
I need User Exit / BADI / BTE for asset Creation.
After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
i have tried all this.But no one is triggering after saving the As01 transaction.
Exit Name           Description
AAPM0001            Integration of asset accounting and plant maintenance
AFAR0003            External changeover method
AFAR0004            Determination of proportional values for retirement
AINT0004            Change amount posted for certain areas
AINT0005            Dummy for extended syntax check. Do not use.
AISA0001            Assign Inventory Number
AIST0001            Exchange number range in master data maintenance
AIST0002            Customer fields in asset master
AMSP0002            Determine relationship type for two company codes
TRAN0001            User exit for asset transfer
Please suggest if anybody worked on this.
regards,
Imran

Hi,
Check out the following posts pertaining to similar topic.
Change Asset Workflow
Asset Management WORKFLOW
Regards
Sreekanth

Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Shopping cart with Asset can not create backend PO in SOSC

Dear Expert,
We are using With SRM 7.0 & ECC 6.0 EHP4 , the shopping cart with account assignment cost center can create backend PO in SOSC, but the shopping cart with account assignment Asset can not create backend PO in SOSC.
The xml message is correct in SRM, but not correct in ECC.
Your help is very appreciated....
Best Regards,
bill

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

LSMW for PR Creation

Hi all,
I've created LSMW for PR using the following parameters:
Step 1 : Direct input:
Object 0080
Method 0000
Program Name RM06BBI0
Step 3 : Maintain Source Fields
i define source fields as following:
HEADER_STRUCTURE
-> ITEM_STRUCTURE
header_structure has item_structure as low level.
Step 5 :
TCODE = ME51N
Step 13 : Create Batch Input Session
I found the error message on this step as following:
Transaction 0: transaction code ME51N not supported
then,
Processing terminated
Please help me out. Thanks a million in advance.
Peerasit

Hi Mauro
Thanks for your advise. Please allow me to ask you for further information.
I try to create LSMW using BAPI and system returns message as following:
Maintain the default values for IDoc inbound processing
Do i have to maintain IDOC prior create LSMW using BAPI for data conversion?
Thanks in advance.
Peerasit

User-exit for Stock Creation while creating PR

hi guru
In case of materials like tools & equipments for which stock does not exist, the user creates a requisition when the material needs to be sent out for repair (subcontracting). The stock for this will be created automatically when such PR will be saved. The data for this like material code, quantity, GL account, etc will come from the PR.
relavent tcodes
me51n----pR CREATION
MB1A(MOVMENT TYPE)---GOODSISSUE
ME_REQ_POSTED(EXIT NAME)----- PURCHASE REQUSTION POSTED
     Program Logic/Pseudo Code
While creating a PR, the values will be entered for KNTTP, WERKS, MATNR, MENGE, SAKTO,KOSTL. These values will be used for the transaction MB1A with movement type 202 to create the stock.
The development is applicable for the PRs with document type ZRP only.(BSART=ZRET) and material type UNBW.
PLZ GIVE ANSWER AND CODE FOR THIS PROGRAM...PLZ URGENT

hi guru
In case of materials like tools & equipments for which stock does not exist, the user creates a requisition when the material needs to be sent out for repair (subcontracting). The stock for this will be created automatically when such PR will be saved. The data for this like material code, quantity, GL account, etc will come from the PR.
relavent tcodes
me51n----pR CREATION
MB1A(MOVMENT TYPE)---GOODSISSUE
ME_REQ_POSTED(EXIT NAME)----- PURCHASE REQUSTION POSTED
     Program Logic/Pseudo Code
While creating a PR, the values will be entered for KNTTP, WERKS, MATNR, MENGE, SAKTO,KOSTL. These values will be used for the transaction MB1A with movement type 202 to create the stock.
The development is applicable for the PRs with document type ZRP only.(BSART=ZRET) and material type UNBW.
PLZ GIVE ANSWER AND CODE FOR THIS PROGRAM...PLZ URGENT

SRM alert configurations for SUS ASN not created in SRM SUS system

Hi All,
We are trying to configure the SRM ASN alerts with the alert category SRM_SUS_AVIS ( Alerts for ASN-SUS) by the same way we did for the SRM_BID_INV for bidinvitation in different client and scenario.
Is the configuration for SUS anyway different than EBP? ( I have posted another thread for bid alert doubt and later it was configured and working fine sometime ago)
If the config for SUS ASN alert is different then what is that?
With our configurations in SLAERT and ALRTCATDEF, and thru RSALERTTEST job we are getting alerts for PO not viewed and Order confirmation not created.
But we are not able to get alerts for ASN not created.
Can anyone throw some light on this please?
Best regards,
Sridhar

Vendor data is maintained in table CRMD_PARTNER only when transactional documents exist for the vendor.

Output type for ORDCHG is not created in PO

Hi,
We have a problem for the output type autogeneration when a PO is changed (ORDCHG).
The scenario is the next:
- We have a Z output type for the creation of the PO. It works fine (the outputy type is generted and the idoc sent)
- We have another Z output type (ZCG3) for th PO change. The output type is not generated automatically whe you change the quantity for example. The strange thing is that if you create the output type manually and you send the idoc and later you change again the PO, now the output type is generated automatically. So it is like it is necessary a previous output type ZCG3.
Do you know where could be the problem?
We have the condition records as the other output type. Also we have marked Multiple issuing and in WE20 we have 2 entries for message ORDCHG in message control (one entry with change message flag marked and the other one without to mark).
Thank you in advance,
Manel

check the "MULTIPLE ISSUING" option in NACE.
NACE -> Select Application EF -> Click on Output types -> Select output type -> Click on Details Button -> Go to General Tab -> Select Multiple Issuing option
Regards
Vinod
Edited by: Vinod Kumar on May 3, 2010 4:43 PM

LSMW for hiring is not picking the next pernr

Hello Friends,
I have prepared an LSMW for hiring via PA40 and for the same i have created an action type with just 4 ITs in it.
the problem is it is working fine for single employee but whn i try to test it for a sequence of employee then it is throwing error.
The old pernr is saved and system is not able to take the new pernr in sequence. I have also tried to default 0000000 as pernr in recording but still the same issue.
I am unable to run this LSMW and i have almost 150 employees data to upload.
Please suggest.

Does your recording have the pernr field pre-populated?
Keep this field blank.

Configuring ITS for EP7.0 to create Transactional Iviews

Hi Everybody,
This is urgent!!!!!!!!
<b>
Do we have to configure Internet Transaction Server for EP 7.0 to create Transactional Iviews?
</b>
with regards
Brahmachaitanya

What is your backend version. If it is ECC 5.0 or ECC 6.0 you need to configure integrated ITS. There are some differences interms of features offered by standalone Vs integrated ITS. Service marketplace will list them very well. (http://service.sap.com/sap-its)
Thanks,
-Bharath

Lsmw for mm01 is not working

Hello experts,
We are extending the material to another plant and storage location etc.
so i want to do in lsmw. but it is not working fine .please help me.
First in the lsmw i selected recording and done the recording for mm01.
in the first screen i entered
material abc,industry sector mech engi, material type wfinis and copy from material abc,then i pressed the
enter and i selected the views Sales: Sales Org. Data 1,Sales: Sales Org. Data 2,
Purchasing and Accounting 1.
then i pressed enter and got the screen to enter plant, valuation type , sales org, cist channel. so i enterd
plant ,sale org and dist channel in the organization levels and copy from fields.
then i pressed enter and in the next screen i entered some required data and pressed enter and in another
screen o entered and etc and finally saved . The recording is
successful .then i completed all the lsmw steps when i run the session it is showing the error
at the screen where we enter the orginational levels like plant, sales org etc.
our flat file is a text file and it is in the same order as in
the lsmw.
I approched one senior consultant and he said we cant do lsmw bcuse
the org level screen will be moving every time.
so please kindly help me what to do to analyse this error.
=>Can we debug the lsmw , if so how.
=>In one moment previously 2 days back when i am doing lsmw i got a
error with return code 13, please tell what actually means and where to see this one.
Thank you so much for the replies.

Shiva,
First of all its not advisable to use the recording method in lsmw for uploading the material master data. It involves lot of views so if something goes wrong very much difficult to identify the error point, at the same time I will advise you to go with bapi or idoc method to do the same.
When comes to you question regarding the debugging of lsmw you can debug it.
From the usermenu tab take the generate conversion program step into u r list of steps
then execute it and go into the program and put a break point then execute the convert data step directly you will get into the debugging mode you do debug the code.

LSMW for t-code ABSO (Create Asset Transaction)

Hi All,
I'm new to LSMW.
I get the requirement to create LSMW tool using t-code - ABSO(Create Asset Transaction).
Could anyone provide some idea/ guide how I perform recording while the
- transaction type A and B restrict posting to <u>depreciation area 04</u> only.
Is there any way to verify / do it? Please kindly advise.
Thank you!

Hello Little
I know this is a very old thread. I am in a similar situation as you were. We have multiple transaction type, each calling specific depreciation areas only. Thus my input file has, for each asset a Depreciation amount, special depreciation etc, based on the transaction type. When I create the LSMW, it maps the target fields (like NAFAV, NAFAL etc) to only one depreciation area. Thus all the values during running the file are wrong.
Can you tell me how you managed this?
Like you I am also new to LSMW!
Thank you

Please sugget BAPI for Asset Creation(AS91 Transaction)

Hi I am Loading Legacy Asset master data into sap transaction(AS91) Please suggeest the right BAPI for this.
Thanks&regards
Mahesh

Hi Raja,
Thanks a lot for quick info u gave I am getting one error when I am trying to execute my program using the BAPI BAPI_FIXEDASSET_CREATE for the date field (capitalized on) saying " Capitalized on of asset INTERN-00001 0 cannot be changed" this field is mandatory for this transcation AS91 and I am also paassing 'X' value to this field inthe structure postinginformationx-CAP_DATE ='X'.
Thanks in advance

LSMW for Asset Creation not creating Transaction

Similar Messages

Maybe you are looking for