LSMW for PA70 Tcode and APPRAISAL infotype in HR ABAP

Hi Experts,
Please help on this, how to create LSMW for PA70 transaction and appraisal Infotype in HR ABAP.
Thanks,
Kumar.

Try searching BDC for table control.
Lot of things are available you need to include that .
For Appraisal.
Check using below FM and try to develop a legacy data upload prog
RHPA_APPRAISAL_DELETE - To delete the appraisal
RHPA_APPRAISAL_ACTIVATE - To activate appraisal before modification
RHPA_APPRAISAL_READ - To change rating and status for an employee
RHPA_APPRAISAL_1045_MODIFY - To modify rating and change date for appraisal
RHPA_APPRAISAL_HISTORICIZE - To change status of appraisal to completed
Performing all actions in order should help to load appraisals.
Thanks

Similar Messages

LSMW for PP01 Tcode

Hi all,
I have a requirement in which I need to use LSMW for Tcode PP01 to update some fields of a custom OM Infotype.
My question is : Is it okay to use LSMW for PP01 tcode or whether I should go for BDC ?
Are their any constraints in using LSMW for PP01 Tcode ?
Kindly assist

you can use LSMW method, because its have screen level validation , if you can go for BDC you need to write logic for validation....

LSMW for PA40 Tcode

Hi all,
I have created a LSMW for the Tcode PA40 to upload the employees data for the initial infotypes 0000,0001,0002.   The record uploaded successfully. But the employees no. is generated by skipping one dummy no.
For example, if 2 records I am uploading means,
Employee no.
1006455    -   Uploaded succes
1006456    -   skipped
1006457   -    Uploaded.
How to stop the employee no. skip as dummy.
Regards,
Raj

Yes Mr. Raj,
In the case of uploading, or when doing the cut-over activity the numbers ranges must be kept in External Range.
Once the system goes live you can keep it as internal.
Regards
Venu

Lsmw for purchase requisition and purchase order

hi all
can anyone brief me for lsmw for PR & PO.

In lsmw in first step selec the option one standard object
Object               0085   Purchase Order
Method               0001   Purchase order
Program Name         RM06EEI0.
Program Type         D   Direct Input
then save and come back and then go to object overview here u will find all the fields use in this object u can upload.
After this follow the normal step.
for pur req use object 0080.

Upload LSMW for Grant Master and Business Partner

Hi,
Does anyone have LSMW' for uploading business partners and Grants
A basic one can be shared. I will build up on that in terms of adding fields etc...
Regards
Anish

Hi,
As both the Grant master and the business partner have tables in several screens, using LSMW is not recommended.
For the grant master record I'd use BAPI_0035_CREATE - Works better and faster.
LSMW cannot support complicated scenarios, such as adding an alternating number of sponsored classes per grant (for example - one grant has 3 classes and another has 4 classes). The BAPI can solve such problems.
Best regards,
Shahaf Yaari

LSMW for transaction KO01 and KOKRS

Hi
Could you give me a hint, in which way should I fill field KOKRS in LSMW for transaction KO01, please?
I've a recording for the transaction and field KOKRS is filled from SVALD-VALUE(01).
The LSMW work OK only for first record from source data flat file and if I want to post all data from file I must run the LSMW so many times as the number of records in flat file.
Thanks in advance
JS II

Hi I have same problem however I solved it via Bi map not to use this object. On other hand have You find out where is this field or how to use this object to upload data for CoA?
thanks in advance.
Marek

An LSMW for transaction FSP1 and FSS1

Hello dear experts,
can you help me please and tell me please if there is a strandard way to use an lsmw for transaction FSP1, i've tried to use the program RFBISA00, but the problem is if i want to create an account in the chart of accounts using FSP1 i need to indicate in wich chart of account( SKA1-KTOPL ) i want to create the account, in the LSMW with the program RFBISA00 the target structures has no compenent KTOPL so how to do this.
thank you in advance.

Hi I have same problem however I solved it via Bi map not to use this object. On other hand have You find out where is this field or how to use this object to upload data for CoA?
thanks in advance.
Marek

Creation and Change Date for Tcode and Function Groups

Hello All,
I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
regards,
Mahesh

Hi,
TADIR and TRDIR is the tables where you can find all these data
Regards
Sudheer

Regarding LSMW Recording for Custom TCodes

Hi Experts,
Can we do the recording in LSMW for Custom TCodes.Actually I have created a table(fields with data elements,provided technical settings) through LSMW Batch Input Method Recording.When I specify the file in 7th step it goes to dump.Could you please help me how to do this problem?

Yes LSMW recording can be used for Custom TCodes, that is actually the main purpose for the recording option.
Why you get a dump can only be determined by reading the dump. Usually this info is among the first 7 pages .

LSMW for Asset Creation not creating Transaction

Hi,
I am using standard LSMW for creating Asset into the SAP system and passing transaction code as AS91.
Object: 0160
Method: 0001
Program Name: RAALTD01
Program Type: B
The asset is getting created, but even after passing the Transaction Data (Structure BALTB), with T-Code AS91, it is not creating the transaction record into Asset.
Any solution / work around for this?
Thanks & Regards,
Sandip kamdar

try with recording method, i had done this for same tcode and sucessfully completed the job.

Deactivate the link between qualification and appraisal

Hi expert,
i have a question for the qualification(infotype 0024) and appraisal (infotype 0025) in PA here.
After I maintained qualification for infotype 0024, i found that, when i go into appraisal(0025), the screen automaticlly switched to qualification(0024).
As i known, i have already done the configurations for the appraisal, but all the appraisal criterira didn't show in info type 0025.
Anyone knows how to deactivate the link between qualification and appraisal?
please advice.
Thanks,
Liang

Hi Liang,
Goto SM31 -> T77S0.
PLOGI APPRA - make it 0.
PLOGI QUALI - make it space or 0 A032 Q.
Try it.
Regards,
Dilek

LSMW for MB1B

Hello,
Can any one help me LSMW for MB1B tcode.
Header details : Movment type,Plant,storage location
Item details : Receiving plant,Mat no ,qty ,batch no.
Regards,
Chitra

ok,we can use recording.
one recording,we have 2 input structure ( Header + Item).
1.How will you make relationship between source and target.
we dont know,while execution how many item record will come for item part?
2.While recording how will you do it?
Regards,
Chitra

How to supress a warning message in BDC for ME11 Tcode

Hi Expert,
I am doing a BDC report for ME11 Tcode and some of warning is ignorable for this transaction code,how can we suppress these warning through BDC program, is it possible or will have to make some changes changes in TCODE(ME11) itself.

hi,
if the warning message coming in a pop-up window then it can be supressed in the following way.
1. comment the lines of the code of bdc recording of that pop-up screen along with the perform of bdc ok code '=ENTE".
2. use the structure ctu_params and fill the correspondings fiels, particularly the field nobinpt = 'X' and then use this structure in the call transcation statement as
call transcation 'ME11'
using bdcdata
options from opt ( structure of ctu_params )
3. At the time of recording use the option of check box " no batch input session ".
regards,
Alok

A small logical problem in LSMW for MM01...

I need to create a LSMW for MM01 transaction, wherein I have to check the initial four
digits of the material as 'ORCL'. If initial four digits of the
incoming material are 'ORCL', then create this material as it is.
Else replace these four digits with 'SAPM' (for sap material) while
creating this material.
This will differentiate between materials coming from Oracle and non
oracle system.
I know that I need to create a new rule in the step 5 of LSMW: "Maintain Field Mapping and Conversion Rules", under the ABAP heading.
But, how should the rule proceed??
Pls help me out!!!

awesome! thnks a lot naimesh.... you are tooo goood!
Can you please help me again...??
Now, I need to replace the records which are not 'ORCLXXX' with SAPXXX format. For example, say a record has the material number as ORCL007. This will pass on and created as ORCL007. If a record has the material number as MMMM007, this should be converted to SAPM007.
Should I use fieldsymbols for this, or just replace the strings??
This will be the last, I promise....

Explain how to use standard LSMW for MM01

Can anyone explain how to use standard LSMW for MM01 Tcode.pls explain briefly.

Hi
Create a project using 0020 as method.
Max

LSMW for PA70 Tcode and APPRAISAL infotype in HR ABAP

Similar Messages

Maybe you are looking for