LSMW  Read files error

Hi
I am using an LSMW to create BOMs.
There are two files one for header and one for Items.
When we execute read the data from the files step.
The output is
Records read from header file and wriiten as well.
Records read from Item file and not written.
So i am unable to upload the item data.
The LSMW is failing in read data step.
It is unable to write data after reading from file.
Any help is more than appreciated.
Regards

Hello Plaban,
What is your purpose? Are you tring to upload the data with more file variant?                                                                               
There are two possibilities to make file names more variable:                                                                               
1.If you choose system dependent file names by setting the according flag (in the first step 'Maintain object attributes'), you can define file names for each system in step 'Specify files' by assigning the files to a specific system ID (with a double-click on the specified file).                                                                               
2.You can use wildcards in the file names where you can assign several values.                                                               
I hope this helps you.
Regards,
Blanca

Similar Messages

  • "Unable to read file" error in Excel 2010 when downloading .xls file from IE11

    We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
    after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
    Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
    If the file is opened directly from /Temporary Internet Files then it opens just fine.
    Window 7 64-bit
    Thanks in advance!

    Hi,
    I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
    Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
    error message/code during you open XLS file from IE 11.
    Hope it's helpful.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Intermittent 'Unable to read file' error when exporting/opening .html to .xls

    Hi, hope someone can help.
    I have an issue where I export a report from the Salesform platform to Excel. The file that is being exported is in html format and the report does not include any Pivot tables.
    The 'Unable to read file' error occurs intermittently, when Excel is already open and you export/open it from Salesforce...
    Have tried using Excel in safe mode with all the add-ins disabled and still no joy. The
    Do not save encrypted paged to disk option has been un-ticked the in Internet Options -> advanced.
    The issue happens in IE and other browsers, after raising the issue with Salesforce support they advised to raise the issue with MS instead, so here I am to see if anyone can help!
    Any help would be much appreciated

    Tools>Internet Options>Advanced tab, uncheck "Do not save encrypted files to disk"
    check your GPO settings to see if you have configured this to be unchecked.
    Thx.
    Rob^_^

  • IMAQ Read File error -1074396159

    Hi NI,
    I am getting "IMAQ Read File" error -1074396159 when trying to read a large image.  I get this error when trying to read a ~400MB image on a very clean (not many extraneous applications) Windows 7 computer with 4GB or RAM.  I tried this on two other not very clean Windows 7 computers with 4GB of RAM and 2GB of RAM respectively.  On the latter two computers I do not get this error.  I found this knowledgebase which explains one possible cause of this error.  Are there any other causes for this error?  Are there any workarounds?
    Thanks,
    Jonathan-LV

    That KB is incorrect, as the memory only needs to be virtually contiguous inside the process address space, not physically contiguous in RAM. This is not affected by how many programs are loaded (with the very slight exception that some read-only pages of DLLs can be shared cross-process in certain cases). This is really a function of how fragmented the memory space is in the process itself. The problem is that a normal 32-bit app on 32-bit Windows only has 2GB of virtual memory space. 500MB is 25% of the entire space. DLLs tend to get loaded scattered throughout the memory space for various reasons and other memory allocations that have different lifetimes cause fragmentation. The number of multi-hundred-MB chunks available is very small in a large app like LabVIEW.
    Some options to help:
    -Moving to a 64-bit OS (still using 32-bit LabVIEW) will change that 2GB address space to 4GB with no changes to your app
    -Moving to both a 64-bit OS plus 64-bit LabVIEW will change that 4GB address space to 8TB (virtually unlimited)
    Eric

  • LSMW unable to read lsmw.read file

    Hi,
    I am trying to create Org. Unit using LSMW through batch processing with transaction code PPOC. I specify the file and the import and convert file on the application server is automatically showed up. But when I click on display the imported file and display converted file, it returned teh error "Unable to read file 'LSMWDEMO_ORGUNIT_ORGUNITS_REC.lsmw.read'"
    Can anyone tell me how I can resolve this?
    Thank you in advance,
    Sunny

    You may not have access or permition to read or write in the server.
    Go to transaction AL11
    Search for a temporary folder (like /tmp)
    Then, change the patch from:
    e.g. /project/subproject/object/LSMWDEMO_ORGUNIT_ORGUNITS_REC.lsmw.read
    To
    /tmp/LSMWDEMO_ORGUNIT_ORGUNITS_REC.lsmw.read
    It must work!

  • Imaq read file error

    Hi,
    The attached program is used to display pictures if input are A,B or C . when it is executed it shows "
    Error -1074395989 occurred at IMAQ ReadFile
    Possible reasons unable to read file"
    Can anybody solve the issue please.
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Picture display.zip ‏82 KB

    In the above attached program the, when a command is recognized the program displays an image if it available in the database. I want to add video to database for some input. How to make my program play a video if it is available or display picture if it is available
    Example : if the input command is "A", the image of "A" is displayed. If input command is "hello" then a video of "Hello" should be played.
    Attachments:
    New folder.zip ‏2320 KB
    SPEECH TO SIGN LANGUAGE TRANSLATOR 2011.zip ‏37 KB

  • LSMW Read Data Error

    Hi Experts,
    While Specifying the path to upload legacy data in lsmw, i have mentioned the lan server path directly to read flat file from specified network location.
    Say example:
    beprod4\em\4_Testing_Phase\05_Object\Upload Files\Master Codes\Master Codes.txt
    An error message "File '
    beprod4\em\4_Testing_Phase\05_Object\Upload Files\'does not exist or is currently locked" is coming up while reading the data from the specified path.
    Can you advice me possible reasons for the error and to resolve it.
    Thanks,
    Kris.

    Hi,
    In LSMW, steps; After Specify File, Did u assign the file in the next step?
    Also check if the file exists in the location and is in the same format(Separators..etc) as specified while in the LSMW step: Specify files.
    Regards
    Shiva

  • Help Needed in Advaced PDF Printing! (Cannot read file error)

    Hi All,
    I have a page that displays 2 reports. I need to Print to PDF all these reports, along with their headings to PDF. I have used the Advanced Print options.
    The report queries for these 2 reports are huge exceeding the 4000 character limit of APEX query region. This query has a lot of parameters in it. Hence I created 2 views for these reports (views that get updated with new values dynamically).
    Now in "Report Queries" I have 2 select statements as "select * from view_1" and "select * from view_2". When both these queries fetch records, if i click on test report, it works perfectly fine.
    But when ever any one of these queries, does not return records, I get an error as "Adobe Reader could not open the file because it is either not supported file type or because the file has been damaged".
    How do I handle this? Is there no way to overcome this?
    Thanks,
    Sumana

    Hi,
    Thanks for the thread. I went through it and tried using the conditional if in RTF (as mentioned in the thread). But I still face problems.
    My XML structure without data is:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <DOCUMENT>
    <DATE>23-JUN-09</DATE>
    <USER_NAME>SUMANAR</USER_NAME>
    <APP_ID>100</APP_ID>
    <APP_NAME>APEX - Application Builder</APP_NAME>
    <TITLE>Home_Page</TITLE>
    <P0_PREPARED_DATE />
    - <REGION ID="0">
    - <ROWSET1>
    - <ROWSET1_ROW>
    <PROJ_NO_NAME>ABC</PROJ_NO_NAME>
    <TASK_NAME />
    <BUDGET_AMT>100.00</BUDGET_AMT>
    <BAL>100.00</BAL>
    <PROJ_CLOSE />
    <HEADER_FLAG>Y</HEADER_FLAG>
    <SORTING_DUMMY>1</SORTING_DUMMY>
    </ROWSET1_ROW>
    </ROWSET1>
    - <ROWSET2>
    - <ROWSET2_ROW>
    <AWARD_PTA />
    <AWARD_PROJ_TASK />
    <BGT />
    <BAL />
    <PROJ_CLOSE />
    <HEADER_FLAG />
    <SORTING_DUMMY />
    </ROWSET2_ROW>
    </ROWSET2>
    </REGION>
    </DOCUMENT>
    My XML structure with data is:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <DOCUMENT>
    <DATE>22-JUN-09</DATE>
    <USER_NAME>SUMANAR</USER_NAME>
    <APP_ID>100</APP_ID>
    <APP_NAME>APEX - Application Builder</APP_NAME>
    <TITLE>Home_Page</TITLE>
    <P0_PREPARED_DATE />
    - <REGION ID="0">
    - <ROWSET1>
    - <ROWSET1_ROW>
    <PROJ_NO_NAME>ABC</PROJ_NO_NAME>
    <TASK_NAME />
    <BUDGET_AMT>100.00</BUDGET_AMT>
    <BAL>100.00</BAL>
    <PROJ_CLOSE />
    <HEADER_FLAG>Y</HEADER_FLAG>
    <SORTING_DUMMY>1</SORTING_DUMMY>
    </ROWSET1_ROW>
    </ROWSET1>
    - <ROWSET2>
    - <ROWSET2_ROW>
    <AWARD_PTA>Test</AWARD_PTA>
    <AWARD_PROJ_TASK>Test</AWARD_PROJ_TASK>
    <BGT>100.00</BGT>
    <BAL />
    <PROJ_CLOSE>28-FEB-09</PROJ_CLOSE>
    <HEADER_FLAG>Y</HEADER_FLAG>
    <SORTING_DUMMY>1</SORTING_DUMMY>
    </ROWSET2_ROW>
    </REGION>
    </DOCUMENT>
    I gave conditional display in RTF as:
    <?if:not(ROWSET1_ROW)?> No Data Found For Specified Search Criteria.<?end if?>
    <?if:(ROWSET1_ROW)?> Display Table Details.<?end if?>
    and
    <?if:not(ROWSET2_ROW)?> No Data Found For Specified Search Criteria.<?end if?>
    <?if:(ROWSET2_ROW)?> Display Table Details.<?end if?>
    On saving the rtf and trying to do a preview I get "Caused by: oracle.xdo.parser.v2.XPathException: Cannot convert to number." error. What am I doing wrong here?

  • LSMW specify files error

    A little help gurus
    When I save the .txt file into the LSMW, an error comes out that says "File Name 'Converted Data' : Max 45 Characters . Remaining data saved."
    What does this mean? What impact does it have in LSMW?
    Thanks in advance

    Hi,
    For example if the field name in sap, say name of the vendor is only 35 characters and you have maintained in the flat file 40 characters. the system will through a warning saying that the data is exceeding my 5 characters so the sap system will reduce that 40 characters to 35(means the system will cut the last 5 characters) and load it.
    It is recommended that the field name should not be over the size of the field length provided my SAP.
    Thanks & Regards,
    Kiran

  • Cannot render files.  The following message appears: file error; the specified file is locked

    Suddenly I cannot render any project in Final Cut 6, because a message reads: file error: the specified file is locked.  Any clues on what to do?

    The reason we suggest searching is there are too many possible causes and unlikely answers and FCP6 was a long time ago.
    bogiesan

  • Reports server Cannot read files from mapped drive

    Hi,
    Am trying to run a report from a network mapped drive under WinNT 4.0 through report server.
    I get "REP-0110 Error opening or reading file" error message. After looking up the help on error, I find:
    1. The file being accessed does exist
    2. The login account has full privileges
    with the file/directory/drive in question.
    If the report to be run is on a local drive,
    everything is fine.
    Can anyone help me asap.
    Thank you
    Sundar
    null

    hello,
    there are multiple things to keep in mind :
    1) if you are using a mapped drive :
    mapped drives are on a per-user-basis. the reports-server-service is running as a system-service by default and will not have the same mapped drives as the logged on user. in fact it fill have NO drives mapped.
    what you could do is to use the UNC-path like \\servername\share\filename to adress the file
    2) problems with UNC
    there are some known problems using UNC to access files on remote machines in some versions of reports. pls check with oracle support services in case this causes problems.
    regards,
    the oracle reports team

  • LSMW.READ builder

    Hi Gurus,
    Does any one know which Program/Function Module converts and generates the .lsmw.read file specifically for the LSMW for FB01 using the RFBIBL00 standard program.
    So in essence, when creating an LSMW for the transaction FB01 using the above mentioned program and you're specifying the FIle where data to be posted resides on your Local Drive and the Imported Data Section is auto populated by generating a file of format .lsmw.read.
    Please help in this regard.

    not answered

  • Arch Won't boot after lockup: "Failed to read file" [SOLVED]

    So like many stories, this one begins with a "Sudo pacman -Syu".
    Everything was updating fine, but then my system locked up.  I let it set for awhile, but when I couldn't even get a console, I finally rebooted (yes, bad, I know).
    I was about half-way through the upgrading process.
    Now my system will not boot, and I only get a "Failed to read file" error.
    I chrooted into my system through the live disk, and managed to finish the upgrade (I had to fix a few files, and reinstall some manually). I tried a "mkinitcpio -p linux," but no luck.
    Is there anything else I could post that might be helpful?  This error does not tell me a whole lot.
    Thanks!
    Last edited by thewooster (2014-06-18 16:11:51)

    I did a little more looking around, and found a few more problems.
    When I run a "mkinitcpio -p linux" now, I get:
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    It also appears I have a number of "empty" directories "pacman -S linux"
    resolving dependencies...
    looking for inter-conflicts...
    Packages (1): linux-3.14.6-1
    Total Installed Size: 70.27 MiB
    Net Upgrade Size: 0.00 MiB
    checking keyring...
    checking package integrity...
    loading package files...
    checking for file conflicts...
    checking available disk space...
    reinstalling linux...
    >>> Updating module dependencies. Please wait ...
    depmod: ERROR: failed to load symbols from /lib/modules/3.14.6-1-ARCH/extramodules/fglrx.ko.gz: Invalid argument
    >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> ERROR: Unable to write to /boot/initramfs-linux.img
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> ERROR: Unable to write to /boot/initramfs-linux-fallback.img
    ldconfig: File /usr/lib/libclamunrar_iface.so is empty, not checked.
    ldconfig: File /usr/lib/libfontforgeexe.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libfontforgeexe.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libgunicode.so.4 is empty, not checked.
    ldconfig: File /usr/lib/libfontforgeexe.so is empty, not checked.
    ldconfig: File /usr/lib/libcord.so is empty, not checked.
    ldconfig: File /usr/lib/libgdraw.so.5 is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf_xlib-2.0.so is empty, not checked.
    ldconfig: File /usr/lib/libgnome-menu-3.so is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf-2.0.so is empty, not checked.
    ldconfig: File /usr/lib/libgccpp.so is empty, not checked.
    ldconfig: File /usr/lib/libhunspell.so is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf-2.0.so.0.3000.8 is empty, not checked.
    ldconfig: File /usr/lib/libgccpp.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libwbclient.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libhunspell-1.3.so is empty, not checked.
    ldconfig: File /usr/lib/libgioftp.so is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf-2.0.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libgdraw.so is empty, not checked.
    ldconfig: File /usr/lib/libX11-xcb.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libgioftp.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libfontforge.so is empty, not checked.
    ldconfig: File /usr/lib/libX11.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf_xlib-2.0.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libclamav.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libgutils.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libgnome-menu-3.so.0.0.1 is empty, not checked.
    ldconfig: File /usr/lib/libgunicode.so is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar.so is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar_iface.so.6.1.23 is empty, not checked.
    ldconfig: File /usr/lib/libpytalloc-util.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libcord.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libX11-xcb.so is empty, not checked.
    ldconfig: File /usr/lib/libgccpp.so.1.0.3 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so is empty, not checked.
    ldconfig: File /usr/lib/libwbclient.so is empty, not checked.
    ldconfig: File /usr/lib/libX11.so.6.3.0 is empty, not checked.
    ldconfig: File /usr/lib/libfontforge.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libgutils.so is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar.so.6.1.23 is empty, not checked.
    ldconfig: File /usr/lib/libclamunrar_iface.so.6 is empty, not checked.
    ldconfig: File /usr/lib/libhunspell-1.3.so.0.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc.so.2.1.1 is empty, not checked.
    ldconfig: File /usr/lib/libgutils.so.2 is empty, not checked.
    ldconfig: File /usr/lib/libfontforge.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libtalloc-compat1-2.1.1.so is empty, not checked.
    ldconfig: File /usr/lib/libgc.so.1 is empty, not checked.
    ldconfig: File /usr/lib/libpytalloc-util.so is empty, not checked.
    ldconfig: File /usr/lib/libcord.so.1.0.3 is empty, not checked.
    ldconfig: File /usr/lib/libgunicode.so.4.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libX11.so is empty, not checked.
    ldconfig: File /usr/lib/libpytalloc-util.so.2.1.1 is empty, not checked.
    ldconfig: File /usr/lib/libgc.so is empty, not checked.
    ldconfig: File /usr/lib/libhunspell-1.3.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libgdk_pixbuf_xlib-2.0.so.0.3000.8 is empty, not checked.
    ldconfig: File /usr/lib/libgdraw.so.5.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libX11-xcb.so.1.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libwbclient.so.0.11 is empty, not checked.
    ldconfig: File /usr/lib/libgioftp.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib/libgc.so.1.0.3 is empty, not checked.
    ldconfig: File /usr/lib/libclamav.so is empty, not checked.
    ldconfig: File /usr/lib/libgnome-menu-3.so.0 is empty, not checked.
    ldconfig: File /usr/lib/libclamav.so.6.1.23 is empty, not checked.
    Gummiboot will not reinstall "gummiboot -path=$esp install":
    Failed to check file system type of : no such file or directory
    I have considered doing a reinstall, but I have so many customizations that I would prefer not to lose them.  I do have an rsync backup, but it is a little old, and do have separate home/root partitions, but wouldn't I still lose a fair amount of customizations?

  • Issue in lsmw ; error in read file step

    hi,
    i 'm facing some really strange issue in lsmw..
    i have created one header structure and 3 sub structures.
    until now its working fine
    but when i created 4th sub structure and in the read file step, its giving the following error :
    "Generation aborted. Reason: No fields with equal names"
    again if i delete that extra structure, its working fine..
    i really don't understand whats the problem... is there any restriction on number of structures?
    i need ur help guys
    Thanks in advance
    shekhar

    In step 13 Create Batch Input Session .....select Keep Batch input folder check box and goto step14 Run batch Input Session ....
    Slect your session name and click on Process....it will give one window and select Display Errors Only....then it will execute without press enter every screen...if any error is there it will stop and display error screen.
    Mohan

  • LSMW error no authorisation "ZSDTEXT_DELIVERY_TEXT_DEL_UPDATE.lsmw.read ".

    I am using LSMW to upload Header Text data In Delivery (VL02N).while running LSMW system giving an error "No Authorisation to open the file "ZSDTEXT_DELIVERY_TEXT_DEL_UPDATE.lsmw.read ".As per company policy they dont want to give authorisation for the same.Is there any way to run LSMW without this authorisation or This authorisation have to give to solve this error.?
    Regards
    Pash@SD

    Hi
    You will need the authorization unless you can arrange with the BASIS team to run it using the BATCH user or other one created with the necessary authorizations.
    Kind regards
    Dawn

Maybe you are looking for

  • Remove Tool Bar from Web

    Hello Experts, Please help me with this requirement as to remove the tool bar that comes up when the query is run on Web. Tool bar with icons for Table, barchart, pie chart etc that appears below the Name of the report needs to be invisible. I have r

  • Pass parameter from Bean to AM Impl

    All, I am invoking the AM Impl custom method from the backing bean like this         BindingContainer bc = BindingContext.getCurrent().getCurrentBindingsEntry();         OperationBinding ob = bc.getOperationBinding(methodName);However my method accep

  • Stuck at Logging in to MobileMe window

    I made my website in iWeb and alerted my domain subscriber to make web.me my alias. Now I'm trying to publish to MobileMe. I get the "Logging in to MobileMe" window, which looks like it's trying to connect, but it never connects... or stops until I f

  • Ignore Tolerance limits for Subsequent docs.

    Dear All, Is there any possibility exists to avoid PP tolerance key check ignore for only in case of SUBSEQUENT DEBIT/CREDIT. The tolerance limits sets in PP working fine for INVOICE, but this check i dont want to be considered in case of SUBSEQUENT

  • Populate separate internal table(alpha num) for select option value entered

    Hi Experts, Please tell me, How to read, validate and populate wage types field entered in select option selection screen to a separate internal table, Here wage types is alpha numeric(contains special chars '/' also). Thanks in advance....