Populate separate internal table(alpha num) for select option value entered

Hi Experts,
Please tell me, How to read, validate and populate wage types field entered in select option selection screen to a separate internal table, Here wage types is alpha numeric(contains special chars '/' also). Thanks in advance....

Hi:
have a look
[Link|http://www.sap-img.com/abap/check-length-and-alpha-numeric-variable.htm]
Regards
Shashi

Similar Messages

How to Fill Internal Table with contents of Select-Option

Hi all:
     There is a select-option s_matnr on the self-made screen.   An internal table t_int is declared in the program. The requirement is that users makes selection with multiple material numbers. I want to put the values of s_matnr into internal table t_int directly. Would you please tell me how?
     Thank you very much in advance.
Edited by: dongdong guo on Jun 13, 2008 3:40 AM

Hi,
Select option works like an internal table only.
For table selection you can use it directly using IN operator in where clause
eg : where matnr IN s_matnr.
Before that you may need to validate the content of the select-option. For that also you need to transfer the content to a new internal table.
u can loop at the select-option.
eq: loop at s_matnr.
      if s_matnr-low = 'MAT1'.
        condition.
      endif.
     endloop.
if you just want to check whether any single valid material number exist in your user screen, then u can use a select single option with s_matnr directly.
select single matnr from mara
            where matnr in s_matnr.
select-option s_matnr behaves like an internal table with four fields.
sign, option, low, high.

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
 bukrs TYPE bukrs,
 werks TYPE werks_d,
 matkl TYPE matkl,
 END OF t_tab.
DATA: w_tab TYPE t_tab,
 i_tab TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

Getting error of Defining an internal table with header line, SELECT-OPTIO

Hi all,
i have a coding for my smart form,In this coding i have define an structure which being used,but when i execute it it give me
error of Defining an internal table with header line, SELECT-OPTIONS, and RANGES is not allowed within a structure.Even tough you can see that in my coding im not using SELECT-OPTION or RANGES,but can't understand why it gives me this error.
Following are the code:
DATA: BEGIN OF traptab OCCURS 50.
        INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
        blart LIKE mkpf-blart,
        blaum LIKE mkpf-blaum,
        bldat LIKE mkpf-bldat,
        budat LIKE mkpf-budat,
        cpudt LIKE mkpf-cpudt,
        cputm LIKE mkpf-cputm,
        aedat LIKE mkpf-aedat,
        usnam LIKE mkpf-usnam,
        tcode LIKE mkpf-tcode,
        xblnr LIKE mkpf-xblnr,
        bktxt LIKE mkpf-bktxt,
        frath LIKE mkpf-frath,
        frbnr LIKE mkpf-frbnr,
        wever LIKE mkpf-wever,
      END OF traptab.
Thanks & Regards,
sappk25

thanks

Filtering internal table using select-option values

Hi,
I got an internal table with select-option values. for eg. it_perno with the values I BT 000160 000170.
Now i got another second internal table which is have the person number. Now i need to filter this second internal table based on the values from the select option table. my question is
i can collect all the values from 160 to 170 in a separate table by looping over the select option table. and then based on the values filter the second internal table person number.
But what would be the case if the select option contains both intervals and multiple options. For eg.
I BT 000160 000170.
I EQ 000185.
So can you suggest any good solution, that based on this select option table i need to filter the second internal table Person number.
Thanks in advance.
Regards,
anbu.

Hi,
Can you not use the select-options in the Select query while populating the internal table.
SELECT pernr FROM pa0000 INTO it_tab WHERE pernr IN s_pernr.
If you cannot do this and you do not want to delete the unwanted entries, then you can use the WHERE clause in the LOOP statement to process the specific entries required:
LOOP AT it_tab INTO wa_tab WHERE pernr IN s_pernr.
Regards,
Aparna Alashe.

How to populate one internal table from another using field symbols

Hi Gurus,
I have a problem. I have to populate one internal table (sructure t_otput) from another internal table (sructure t_from) using field symbol.
Structure for from table.
types: begin of t_from,
 year(4) type c,
 ww(2) type c,
 site type marc-werks,
 demand type i,
 end of t_from.
Structure for output table.
types: begin of t_display,
 title(30),
 WW1(10),
 WW2(10),
 WW3(10),
 end of t_display.
The from table looks like this:
Year | WW | Site | Demand
2005 | 1 | OR1 | 12.00
2005 | 2 | OR1 | 13.00
2005 | 3 | OR1 | 14.00
The display table which has to be populated should look like this:
Title | WW1 | WW2 | WW3
OR1 | | |
Demand | 12.00 | 13.00 | 14.00
How to populate display table using field symbol?
Please give code snippets
Thanks,
Gopal

Gopal,
Here is the code, however I am not vary clear about the ORG1 and Demand display that you have shown in the display. I am sure with this code it should not be a big deal to tweak in whatever manner you want.
TABLES : marc.
TYPES: BEGIN OF type_display,
title(30),
ww1(10),
ww2(10),
ww3(10),
END OF type_display.
TYPES: BEGIN OF type_from,
year(4) TYPE c,
ww(2) TYPE c,
site TYPE marc-werks,
demand TYPE i,
END OF type_from.
data : t_from type table of type_from,
 t_display type table of type_display.
field-symbols : <fs_from> type type_from,
 <fs_display> type type_display.
data : wa_from type type_From,
 wa_display type type_display.
wa_from-year = '2005'.
wa_from-ww = '1'.
wa_from-site = 'OR1'.
wa_from-demand = '12.00'.
insert wa_from into table t_from.
wa_from-year = '2005'.
wa_from-ww = '2'.
wa_from-site = 'OR1'.
wa_from-demand = '13.00'.
insert wa_from into table t_from.
wa_from-year = '2005'.
wa_from-ww = '3'.
wa_from-site = 'OR1'.
wa_from-demand = '14.00'.
insert wa_from into table t_from.
data : variable(3) type c.
field-symbols : <fs_any> type any.
break-point.
Loop at t_from assigning <fs_from>.
variable = 'WW'.
wa_display-title = <fs_from>-site.
concatenate variable <fs_from>-ww into variable.
assign component variable of structure wa_display to <fs_any>.
<fs_any> = <fs_from>-demand.
endloop.
append wa_display to t_display.
clear wa_display.
loop at t_display assigning <Fs_display>.
write :/ <fs_display>.
endloop.
Note : Please award points if this helps you.
Regards,
Ravi

How to populate an internal table from a string variable

Hi Experts,
My internal table contains a field of length 255 characters.
I have a string variable. I need to populate the internal table from the string variable.
How should I code for this.
Thanks,
Sangeeta.

Hi Sangeetha,
<li>Try this way.
REPORT ztest_notepad.
DATA: BEGIN OF it_file OCCURS 0,
 data TYPE c LENGTH 255,
 END OF it_file.
DATA str TYPE string.
DATA g_len TYPE i.
DATA g_off TYPE i.
DATA g_loops TYPE i.
CONCATENATE
'1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890x'
'1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890y'
'1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890z'
'12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789m'
INTO str SEPARATED BY space.
g_len = STRLEN( str ).
g_loops = g_len / 255.
g_off = 1.
DO g_loops TIMES.
IF g_loops NE sy-index.
 IF sy-index EQ 1.
 it_file-data = str+0(255).
 ELSE.
 it_file-data = str+g_off(255).
 ENDIF.
 APPEND it_file.
 CLEAR it_file.
 g_off = sy-index * 255.
ELSE.
 g_len = g_len - g_off.
 it_file-data = str+g_off(g_len).
 APPEND it_file.
 CLEAR it_file.
ENDIF.
ENDDO.
LOOP AT it_file.
WRITE:/ it_file-data.
ENDLOOP.
Thanks
Venkat.O

How to assign select-option values to internal table

hi all,
how to assign select-option values to internal table
thanks in advance.

Hi,
You just need to loop at your select-option field and take the values from low and high fields.
for. e.g
loop at s_werks .
move:s_werks-low to <your itab>
if not s_werks-high is initial .
move: s_werks-high to <youritab>
endif .
append <your itab>
endloop .
OR use select statement.
regards,
Omkar.
Message was edited by:
Omkaram Yanamala
Message was edited by:
Omkaram Yanamala

How can i read local excel file into internal table in webdynpro for abap a

Could someone tell me how How can i read local excel file into an internal table in webdynpro for abap application.
thank u for your reply

Deep,
File manuplations...............................
1. At the presentation level:
->GUI_UPLOAD
->GUI_DOWNLOAD
->CL_GUI_FRONTEND
2. At the application server level:
->OPEN DATASET : open a file in the application server for reading or writing.
->READ DATASET : used to read from a file on the application server that has been opened for reading
-> TRANSFER DATASET : writing data to a file.
-> CLOSE DATASET : closes the file
-> DELETE DATASET : delete file
If file is on the local PC,use the function module GUI_UPLOAD to upload it into an internal table by passing the given parameters......
call function 'GUI_UPLOAD'
exporting
filename = p_file
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = t_data
p_file : excel file path.
t_data : internal table
reward points if useful.
regards,
Vinod Samuel.

Creation of internal table dynamically based on the Date Range entered

Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram Kandula

Hi Sivaram,
 I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
 ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
 ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = gt_fCAT1
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
 create data new_line like line of <dyn_table>.
 assign new_line->* to <dyn_wa>.
select vbeln
 fkart
 vkorg
 vtweg
 fkdat
 spart
 fksto
 from vbrk
 client specified
 into table gt_vbrk
 where mandt = sy-mandt
 and fkart in ('ZF5','ZFR')
 and vkorg = '1100'
 and vtweg = '20'
 and fkdat in s_fkdat
 and spart = '06'
 and fksto = ' '.
 if gt_vbrk[] is not initial.
select vbeln
 fkimg
 prsdt
 netwr
 matnr
 arktx
 werks
 mwsbp
 from vbrp
 client specified
 into table gt_vbrp
 for all entries in gt_vbrk
 where vbeln = gt_vbrk-vbeln
 and werks in s_werks
 and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
 name1(3) type c,
 s_month type string,
 s_month1 type string,
 s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
 loop at gt_vbrp into gs_vbrp.
 gs_final2-matnr = gs_vbrp-matnr.
 gs_final2-arktx = gs_vbrp-arktx.
 gs_final2-fkimg = gs_vbrp-fkimg.
 lv_month1 = gs_vbrp-prsdt.
 read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
 if sy-subrc eq 0.
 name1 = wa_t247-ltx.
 endif.
 concatenate name1
 lv_month1(4) into s_month SEPARATED BY '_' .
 CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
 CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
 gs_final2-month = s_month.
 lv_netwr1 = gs_vbrp-netwr.
 lv_mwsbp1 = gs_vbrp-mwsbp.
 gs_final2-MONTH_QTY = S_MONTH1.
 GS_FINAL2-MONTH_VAL = S_MONTH2.
 gs_final2-value = lv_netwr1 + lv_mwsbp1.
 append gs_final2 to gt_final2.
 clear: gs_final2. "lv_name2.
 endloop.
 if gt_final2[] is not initial.
 sort gt_final2 by matnr month ascending .
 loop at gt_final2 into gs_final2.
 gs_final2_01 = gs_final2.
 collect gs_final2_01 into gt_final2_01.
 endloop.
 endif.
 ENDIF..
Regards
Ankur

Set of default values for Select-Options

Hi Gurus,
I have a requirement where I need to set default values for select options
ex: SELECT-OPTIONS: S_MTART FOR MARA-MTART
default values must be ERSA - HIBE- FHMI - DIEN - GEST
Please tell me how to do it.
Effective replies will be rewarded with full points
Karthik

Hi,
For each SELECT-OPTION, you can only specify one DEFAULT.
You must specify the default value g in its internal format, e.g. "SELECT-OPTIONS DATE FOR SY-DATUM DEFAULT '19931224'", not "... DEFAULT '24.12.1993'".
The default value g should normally be a literal because, at runtime when you use SUBMIT, it is transferred to the selection options table sel so early that no value can be assigned to the field g. System fields like SY-DATUM are an exception here because the system usually assigns values to them as soon as the report processing starts.
When you use user-defined selection screens in your programs that you do not call using SUBMIT, the DEFAULT value is transfered when the selection screen is first called. In this case, therefore, you can use other fields g.
regards,
sowjanya
Message was edited by: sowjanya suggula

Problem on Search Help for select-option

Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!

Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
   based upon
   MULTIPLE Selection,
   selected by the user,
   in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynprofield     = 'BUKRS'
      dynpprog        = sy-REPID
      dynpnr          = sy-dynnr
      multiple_choice = 'X'
      value_org       = 'S'
    TABLES
      value_tab       = ITAB
      return_tab      = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
    BUKRS-SIGN = 'I'.
    BUKRS-OPTION = 'EQ'.
    BUKRS-LOW = RETURN-FIELDVAL.
    BUKRS-HIGH = RETURN-FIELDVAL.
    APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m.

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

Input Negative values in selection screen for select-options field

I am not able enter negative values for
SELECT-OPTIONS V_ERFMG FOR MSEG-ERFMG.
It says negative values are not allowed but I need to check for negative values. Kindly provide me solution.

You can't put the negative values here...because the Domain which is attached to MSEG-ERFMG has not the "Sign" checkbox on.
Try with this code:
tables:wbrp.
SELECT-OPTIONS V_ERFMG FOR WBRP-menge.
Regards,
Naimesh Patel

How to add OBLIGATORY for SELECT-OPTIONS

Hi experts,
I can use OBLIGATORY for PARAMETERS
PARAMETERS :s_WMno TYPE LINK-LGNUM DEFAULT 'SCA' OBLIGATORY.
I want to add OBLIGATORY for SELECT-OPTIONS. How to do this?
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME .
    SELECT-OPTIONS: s_matnr FOR mara-matnr .
SELECTION-SCREEN END OF BLOCK b1.
Many thanks.

Hi,
TABLES spfli.
SELECT-OPTIONS : carrid FOR spfli-carrid OBLIGATORY. " This makes only Low field Obligatory
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'CARRID-HIGH'. " To make High field also obligatory
      screen-required = 1.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Cheerz
Ram

Populate separate internal table(alpha num) for select option value entered

Similar Messages

Maybe you are looking for