LSO Check Booking and Prebooking

Is there a BApi that is to be modified to validate booking or prebooking personnel when you've created a new prerequisite (object type C) for course type in LSO? Or, is this a configuration change only? We've created the relationship and the intotype is correct, however, when you test the action the system is not checking for the prerequisite and issuing an error.

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

Similar Messages

Error while Booking and Prebooking course

Dear Experts,
I have tried to prebook a course from the Portal. Upon clicking the prebook link, the system throws the error,
"Error when creating the prebooking with the data entered. Check and, if necessary, change your entries and try again. "
Also when I try to book the course, the system gives the following error,
"Transport connection is active; no changes possible"
Am I missing any configurations. Please guide me on this issue.
Thanks and regards
Saravanan K

Hi Saravanan,
Regarding the first error on prebooking, there always are the start date and end date for each location displayed on the list of entries found. That's why the administrator can choose from this list the right object, which is valid within the period he has already entered on the 'prebook participation' popup or is going to enter. It also depends which from selection's criteria will be entered as first on the popup: location first and the period might be changed afterwards or the period and then the location.
Anyway the system delivers the above error when the invalid location has been selected and the further processing will be stopped.
Regarding the second error, check the SAP Notes 33582, 819656, 163897 and 746917.
In many cases, the transport connection in the back-end system is active. You can then proceed as follows: In the table T000, change the transport settings for the corresponding client. If this is not possible, you can use the TRSP/CORR switch in the T77S0 table to deactivate the transport connection for HR-PD objects.
I hope the above helps.
Li

How can I use my iPad to check-in and check-out books to my students in my classroom?

How can I use my iPad to check-in and check-out books to my students in my classroom?

Assuming there won't be any wi-fi netwokrs, will there be cellular reception there?
If so, you need to check if a carrier or the carrier if there is only one, offers a data only plan for the iPad and similar devices along with providing a mico-SIM card. If a carrier offers a data only plan with a full size SIM card, you can cut the SIM card down to mico-SIM size. There are devices that provide for this.
If there is cellular reception but a carrier or the carrier doesn't have a data plan only for the iPad and similar devices but offers a tethering plan for phones on their network, you can tether your iPad to the cell phone for internet access via the carrier's cellular network.

Table to track book and payment info-LSO

Hi Folks,
I am trying to find out book and payment info related table while booking in LSO, we have radio button against this book and payment information .
We can capture the booking and follow up details in -HRP1001 and HRPAD25 but unable to find out which button selected while booking.
Please share your thoughts on this.
Thanks

Hi Kumar,
That information goes into the 'Priority' field of infotype 1001. The field name is HRP1001-PRIOX. You will have a record in both directions in HRP1001 i.e. for the employee and the course as well. You will see that the radiobutton you chose while booking the participant, gets mapped to the value of one of the switches(given below) in T77S0. As a result, HRP1001-PRIOX will have the corresponding value that has been set for the applicable(your selection of the radibutton) switch-
SEMIN-MAXMU(Maximum priority for essential booking)
SEMIN-NPRIO(Default priority for normal booking)
SEMIN-MINWL(Minimum priority for waiting-list booking)
The system I use I get the values: 50-Normal, 09-Essential, 90-Wailisted. Values in your system may be different.
Hope this helps.
Thanks
Amit.

I just received my iPhoto book and 3 of the maps didn't print. When I checked my PDF they are there. What can I do?

Hi I was so excited today to get my 100 page. Iphoto book. However on 3 of the map pages my maps have not printed. It's the first 3 in the book and the names of the countries are there just no pics of the maps. I checked my PDF and they where there. What can I do?

Call the Apple Store and discuss the problem with them. The return policy is listed here, for your reference:
http://store.apple.com/us/help/print_products#return
Regards.

I am trying to open a downloaded book and it says: Error! Check Activation

I am trying to open a downloaded book and it says: Error! Check Activation

For this problem, you need to deauthorize and authorize ADE again.
Launch ADE
Help -> Erase authorization.
ADE will be deauhorized.
Now again AUTHORIZE ADE
Help-> authorize computer.
Error will be fixed !!

HT201412 I am reading an e-book and the screen has become blurred to the point that you cannot even see the letter. I checked the e-book in another computer and can be seen without problems. What's worst, when this happens all the web sites have the same

I am reading an e-book and the screen has become blurred to the point I cannot see the letters. Other pages are patched grey. I checked the ebook in another computer and it shows no problem. Also, when this happens, other web sites get blurred or patched. Do you know what can it be?

You can try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. See if that helps.
But if it doens't or if hte issue repeats you may want to make an appointment at your local apple store and have them check it out.

Topichead does not convert properly when ditamap saved as book and hierarchy not maintained

I'm new to DITA and piloting some documents in FrameMaker 12, trying to get the output that I need.
I have created a ditamap with a structure as follows:
Map title
- Concept A
- Topichead
   - Task A
   - Task B
- Concept B
- Task C
   - Task D
I would like this to ouptut a PDF with TOC and bookmarks as follows:
Map title => book title
- Concept A => Chapter 1
- Topichead => Chapter 2
   - Task A => Chapter 2.1
   - Task B => Chapter 2.2
- Concept B => Chapter 3
- Task C => Chapter 3.1
- Task D => Chapter 3.2
To do this I save the ditamap as a "Book 12.0 with fm components (*.book)" and set the Bookmark levels in the PDF Setup as follows:
ChapterTitle
head.0
Title
title.0
.title.1
..title.2
...title.3
However, the output systematically comes out wrong because the Topichead element, which is just a title and is not attached to any topic, is not taken into account as a hierarchical element in the output. It generates an empty fm document containing just the topichead title, output as a ChapterTitle or Title depending on whether I set its toc attribute to yes. But the TOC is all wrong - instead of taking Task A and Task B as children of Chapter 2 it puts them all at level 1 so I get:
- Concept A => Chapter 1
- Topichead => ignored
   - Task A => Chapter 2
   - Task B => Chapter 3
- Concept B => Chapter 4
- Task C => Chapter 4.1
- Task D => Chapter 4.2
If I output using the bog-standard DITA-OT instead of fancy and expensive FrameMaker, everything comes out correctly.
Is there any way to correct this?
Thanks,
Archaeopteryx

Hi Archaeopteryx...
I beieve that FM only uses the elements from topics to create the output .. as you're seeing, headings in the map are ignored. I also believe that the process that FM uses to aggregate the topics into FM files is hard-coded somewhere in the DITA plugin, and not exposed for modification .. so aside from developing a plugin to modify the process, I think you're out of luck if you're using the default DITA support. The only solution would be to include title-only topics in the structure that provide those headings rather than using a topichead.
However, you might want to check out DITA-FMx, in which the aggregation process is controlled by XSLT that you are free to modify. The default book-build process in DITA-FMx also ignores these map elements, and assumes that all content is defined in topics, but you could tweak the XSLT to include topicheads as topic headings in the generated book.
     http://leximation.com/dita-fmx/
Thanks,
Scott Prentice
Leximation, Inc.
www.leximation.com

Report to check "Book Qty & Counted Qty" in Warehouse Management

Hi All,
In MI24, I can see "Book Qty & Counted Qty" in Inventory Management.
But, Is there any report to check "Book Qty & Counted Qty" in Warehouse Management.
If any report is there, let me know the T-Code.
Regards
Siva

if you know the inventory record and the warehouse number, you can fetch the information from table LINV. Input warehouse and inventory record. The fields GESMA and MENGE/MENGA give the book quantity and counted quantity respectively.
Regards,
Rajiv..

Infotype needed for firm booking and canceling at PV12 transaction.

Dear All,
          I am workflow consultant.I am not well aware of infotype details for the following scenario.
          I am now involved in workflow development for SAP HCM training and event management.
          When firm booking or cancel booking is done at PV12 transaction, workflow should trigger.
          Should workflow trigger on booking or canceling it, I have to maintain infotype details in HR master tables.
          So, please state about what is the infotype for firm booking and cancel booking for which I'll be grateful.
Thanks and regards,
S.Suresh

Dear all,
              Any one one know where to check for the infotype which is getting affected when firm booking or cancel is made in PV12 transaction?
              Please suggest for which I'll be grateful.
Thanks and regards,
S.Suresh

Address book and bluetooth phone

Hi,
I have been trying to use my bluetooth enabled mobile phone with the address book to dial numbers and send sms. I am using the Nokia N80, Nokia 9500 and the Motorola Razr V3 BLK. But when I pair the phone with address book and click on the tab of the contact, address book loses the bluetooth connection and the Send SMS and dial number options are not highlighted.
I have tried looking around for help, but haven't found anything other than BluePhoneElite. I would appreciate it if anyone could help me with this.
Best Regards,
Aditya

I have the same problem with my Nokia N70 whereas in the past I've had this address book connection with SE T610 and SE K700i, though with the 610 I had to troop round the re-pairing route a couple of times and with the 700i, I had to wait for Tiger.
If you clear the settings and pair again in the Bluetooth wizard, at the point where the paired services screen shows, the Address Book option is clearly missing. It may be that 10.4.6 has rewritten the configurations for these phones, or it may be that we have corrupted or outdated preference files and perhaps somebody could advise on which files we might check.
It's certainly frustrating to be missing this facility when my phone can both sync and work as a high speed modem through Bluetooth. The Address Book facility may be the lowest priority, but it remains a useful extra feature which I miss.
PowerBook 15" 1.67 Mac OS X (10.4.6) Plain vanilla OS

My computer will not let me click the box in iTunes where it says "sync only checked music and videos." So i cant unsync songs that i don't want on my iPod but still want in my iTunes. HELP?!

My computer will not let me click the box in iTunes where it says "sync only checked music and videos." So i cant unsync songs that i don't want on my iPod but still want in my iTunes. HELP?!

These are your options:
1. Restore the iPhoto library from the most recent backup that predates the issue.
          Advantages: Always works, if library damage is causing the problem and the backup is intact.
          Disadvantages: Impossible if you don't have a backup. All changes made since the backup are lost.
2. Repair or rebuild the library. Be sure to back it up first.
          Advantages: May solve the problem with no loss of data.
          Disadvantages: May fail. May take a long time if the library is large.
3. Scavenge the library with a third-party application called "iPhoto Library Manager," which you can find in a web search. From the application's menu bar (not the iPhoto menu bar), select Library ▹ Rebuild.
          Advantages: All images should be preserved.
          Disadvantages: All books, calendars, and slideshows will be lost.

I Need to build a database/booking and dispatch system that intergrates with iCal, Address Book and all Apple device's What would be the best Way.

Hi
Can anyone give me some useful information on the best ways to design and build a database/booking & dispatch system that can be intergrated through ical, address book and available on my macbook, ipad & iphone and all accessed through icloud.
I started my own chauffuer Service a year ago as an independent. it's becoming a massive bore that most of my time is spent taking down information, checking if i am available for clients and with alot of diary checking and repeatative entries and email ping pong and invoicing, what i want to do is concerntrate on advertising and marketing and using my time off for R & R
What i would like to do is access my information in an app and automate most of the processes like
assigning the job to the client with intergration through iCal and Address Book
be able to email confirmation through mail with an invoice produced through numbers or excel
payment is already done through payleven mobile and must be done in person so i'd rather keep that seperate to all processes apart from a tick box to say it has been paid for.
I have been looking at all options FileMaker, Bento, Automator, Apple Script. to be frank im no expert and am a little confused as to what to do any advice would be greatly recieved.

Hi,
I would suggest that is going to be an involved and complex process.
I would personally look into some of the invoicing and time scheduling software available and see if any fit your needs.
Take a look here: http://www.tuaw.com/2008/07/30/app-roundup-timekeeping-and-billing/
and here: http://www.tuaw.com/2008/07/31/app-roundup-timekeeping-and-billing-part-ii-the-q uickening/
for starters.
Best wishes
John M

Font Book and duplicates. Strange Behaviour?

Hello,
I’d like to ask a question about Font Book and font duplicates.
Here is the situation. I’ve just installed Microsoft Office 2008 on a MacBook Pro (13’) running Snow Leopard (10.6.8). After the installation is complete and all of the Office updates are installed, I went to Font Book to check for issues. Surely enough, there were font duplicates.
In all cases, the fonts installed by MS Office (/Library/Fonts/Microsoft/) are older than the Snow Leopard system fonts (/Library/Fonts/). However, when in Font Book I Ctrl-click to “Resolve Duplicates”, what Font Book then does seems counter-intuitive, to say the least: it actually disables the newer Snow Leopard system fonts and leaves the older versions of these fonts installed by Microsoft enabled. No matter what I do, I can’t get Font Book to leave the newer system fonts enabled and disable the older Microsoft fonts.
This seems wrong to me and a source of potential problems. For example, won’t disabling fonts in the system folder and activating older fonts in the Microsoft folder cause future problems for the OS X system?
Am I missing something here? Is this normal? Any help would be greatly appreciated.
Regards,
Stephen

Thanks, 'noondaywitch', for your quick and helpful reply.
Indeed, Ctrl-clicking on the individual font families, and then also on the individual styles of each font family (regular, bold, italic, etc.), one by one, seems to do the trick.
I went through them individually, and there seems to be no rhyme or reason to Font Book’s logic if you unleash it on the whole lot at once. In this case, unless I actually checked each style of each individual font family, it would appear that Font Book sometimes left older versions of a font activated, while disabling newer ones. To me at least, this seems bizarre. But then again, I’m not Font Book...
Thanks also for the link.
Regards,
Stephen

Checking book quality before ordering

Does anyone know how to verify that the PDF file transmitted when ordering a book accurately represents what you see when designing a book?
Why I want a preview of the PDF...
My order this year consisted of 3 large books and 3 extra-large books. Both were identical projects in iPhoto with the only difference being the size of the book. The large books arrived looking great and the extra-large books had 21 out of 30 pages that looked terrible. These were not issues related to the image resolution. I'm familiar with the little warning icon when images are too low of a resolution.
Customer service offered my wife a partial refund because they said that the PDF's on their end looked horrible as well and therefore we were somehow to blame. They suggested not using WiFi and closing all other applications before ordering.
I was livid because this is our 10th year in ordering books and we've never had this problem. I called to complain since our iMac isn't using WiFi and there's no way to check the quality before ordering. I can accept that the printing company isn't to blame due to the rule of garbage-in-garbage-out but I can't see what I could have done differently to avoid this.
I was given a full refund and advised to place the order again. I should then wait 30 minutes and then call with the order number and ask them to preview the PDF for me to make sure it looks ok. I'm sure this will catch any glaring problems but it doesn't seem very efficient. Seems like there should be an online preview capability.

Answering my own question:
The "More Like This" sidebar after I posted suggested the following thread which looks interesting:
https://discussions.apple.com/message/15636680#15636680

LSO Check Booking and Prebooking

Similar Messages

Maybe you are looking for