LSO-Training Hours

Hi Folks,
Could any one please share ur  ideas on how to capture the Training Hours ,do we have any standard reports  to capture .
Can we we capture the external training progress in SAP LSO or we need to upload the results manually.
I have checked the infotype 5042 -External Training catalog ,how it is connected to track the progress.
Please share ur ideas on this issues.
Thanks in Advence
Kumar

Dear Kumar,
Could you please detail how did you capture the Training hours. I have to report the same.
Regards
Lucky

Similar Messages

  • Attendance percent and training hours.

    Hi,
    I have the following queries in Training.
    1) How can we maintain Attendance % for an attendee such as 80% attendance.
    2) How can we maintain the training hours for an employee and also the tranining hours for a Business event.
    3) Is there any way of maintaining Budgeted Training Hours.
    With Regards,
    Kaustuv Goswami.

    the report will be a SAP query from R/3. Add that field in the query

  • LSO training informations

    Hello,
    I have to develop an additional function to SAP-LSO. I need to know where the informations about trainings and learner are saved.
    I've found the table LSOLSPTRACKING. It contains the most data i need. But i nee the learner information to these runs in LSOLSPTRACKING. Where can i find it?
    Is there a function module to read all informations about a learner? A function module which supplies the data like in the portal view?
    The next thing is: I have to overwrite this values. Is there a similiar function module?
    Thanks for any help.
    Greets
    Silas

    Hi,
    tranining needs (TN) are linked to training types (D).
    You can also find information in SAP Service Marketplace
    http://service.sap.com/hrfr under France -> Media Center -> Training Needs Management
    Regards
    Frank

  • LSO Training room and Qualifications

    Hi Friends,
    I am new to LSO and i am doing data migration for LSO with LSMW tool, i need to create the following
    1. Training Events Rooms
    2. Employee Qualifications (Object Q)
    How do i create these?
    which transaction code do i need to record the above data and what are the steps to be followed.
    Regards,
    Lee.

    Employee Qualifications (Object Q)
    Since it is an object i think LSMW for PP01 Tcode would be better
    Lets wait for other expert views

  • Delivery Type Attributes in LSO/Training and Events Management

    We need to create an OJT delivery type for Courses.  It should allow for duration of the training and assignment of instructor, but not require a schedule nor a course content URL.  None of the standard delivery types fit this bill, so I would like to take one of them and modify the attributes, but the IMG does not easily allow this.
    My question is two-part:  1.  Is there a Delivery type that will accommodate the above requirements?  If not, then 2.  How do I modify attributes for a Delivery type to try to customize one that will do what we need it to?
    Thanks in advance for your assistance.
    Roci

    Hi,
    Follow SPRO>Training and Event Management>SAP Learning Solution>Training Management>Course Preparation>Delivery Methods
    Hope this helps.
    Donnie

  • LSO Training History

    Hello,
    I'm looking for a function module to get a training history of a user. For example:
    Get all results for USER1 of training 60022729.
    Knows anyone a function module for this? Or how can i read this informations?
    Greets
    Silas

    Hi Zubair,
    Do these steps
    1. Select the Check box for <b>Standard Selection screen</b>.
    2. Click the Button "<b>Set Structure Condition</b>"
    3. You will see a popup and table control as Structure Condition
    4. You can enter the relation to which the Object type in your Selection screen you have chosen.
    For Eg if you are looking at the Employee  -> Addtended Training program
    Your Object Type is "P" and select the respective Evaluation Path in the POPUP Structure Condition.
    Hope this will help you.
    ~Bhawanidutt.

  • LSO -Training ADministrator

    Hi Folks,
    Could any one brief about the administrator roles in LSO as many things can be customised in easy access itself  using Current settings .[ with out going to SPRO]
    I just want to know about the consultant role here in back end.
    Thanks in advance
    Kumar

    Hi Elizabeth,
    The administrator inital who did the actual backend booking will be recorded in table HR1001 Field Name: UNAME, based on course relation (025 is classroom, 614 if e-learning), course id and personal id you will be able to retrieve this data.
    Try using SE16 > HRP1001 to find the data.
    Hope this answer helps you along
    Best regards
    Jakob Stigaard

  • LSO Training catalogue

    Hi Experts,
    User is not able to view the training catalogue in the portal front. but it is displaying in backend system properly.
    Eventhough he  assigned all the required roles.
    All the functional settings are in place.
    Kindly provide some solution.
    Regards,
    Venkat Charan.

    Hi Vanket,
    Can you check if your Structural Authorization has all the required entries for your user.
    Regards,
    Amith Ingua

  • LSO - Training approval notification

    Hi
    When Line Manager approves the Training request of a Candidate, we are aware that candidate gets a approval / rejection notification, is the notification sent to manager also. What is the standard process.
    Awaiting an early reply.
    Thanks !

    Hi Priya,
    Thanks for the reply, but I would like to have the confirmation here -
    The employee/delegate gets the notification not the manager, since the manager is the one approving it.
    So the Manager wont get the confirmation as he himself is the approver.
    Is this a Standard SAP Process ?
    Awaiting reply.
    Thanks !

  • LSO Training Administrator booking & error workflow

    Is there a field in a the table that records the training administrator creating a booking?  I need to refer to it if possible for use in ERROR PC-SCM workflow.  We have multiple training administrators and want restrict the message to go to the appropriate administrator - if possible.  If not, I suppose the workflow wo uld go to all training administrators?
    Thanks,
    Liz

    Hi Elizabeth,
    The administrator inital who did the actual backend booking will be recorded in table HR1001 Field Name: UNAME, based on course relation (025 is classroom, 614 if e-learning), course id and personal id you will be able to retrieve this data.
    Try using SE16 > HRP1001 to find the data.
    Hope this answer helps you along
    Best regards
    Jakob Stigaard

  • SAP LSO: Training appraisal after 3 month

    Hi everyone.
    I know about the course appraisals directly after a training. Is there a possibility to automatically send out a second evaluation form to the participant after some time regarding training transfer (e.g. after 3 month).Would that be standard or enhancement?
    Thanks in advance

    Hi Nadja,
    Yes you can able to send the notification using a custom workflow. Please try to use BOR LSO_TRAINI for trigger element.
    Thanks & Regards,
    Ganesh R K

  • Only 1 LSO Appraisal Template avail for assigning to HRLSO TEMPL

    Hi
    We are currently building LSO Training Management in SAP ERP 2005.
    Objective Settings and Appraisals is also used concurrently.
    The following appraisal templates has been configured in PHAP_CATALOG under Category Group SAP Learning Solution
    Category Group / Category / Template
    ============================
    <b>SAP Learning Solution</b>
    <b>  Training course appraisal: Classroom</b>
                Classroom Training <i>(standard SAP provided)</i>
                Classroom Training  - Anonymous <i>(standard SAP provided)</i>
                Customer Course Evaluation <i>(customer specific)</i>
    <b>  Training course appraisal: WBT</b>
                Web-based Training <i>(standard SAP provided)</i>
    I would like to set the default appraisal template to Customer Course Evaluation whenever I activate appraisals in transaction LSO_PSV2 from Participation > Appraisals > Create whilst clicking on the course.
    In order to acheive the above, in the config setting for HRLSO TEMPL , I will need to assign the appraisal template. 
    The problem is the <b>only</b> appraisal template that allows me to select when I click on the search help is Web-based Training.  Not any others.
    Is there any config setting that needs to be taken care of so as to get the search help top pop up Customer Course Evaluation for my config selection as well ?
    Thanks,
    Gregg

    Hi Gregg,
    I tested the issue and after my investigation I found out the following:
    I created a new template and did the steps you described. In the T77S0 i wanted to have the new template in the list while pushing the F4 on the switch HRLSO TEMPL, but only the one was shown which is the current...
    I went to PP01, checked the Serial Number of the Appraisal template I created and entered it into the HRLSO TEMPL manually, than pushed "Save" -> it worked correct, no error messages came.
    Now once again went back to the switch, pushed on F4 and there was the bug -> only the new template I created was on the list...
    Thus our SAP internal systems are up-to-date with the newest patches, I suppose that this one is probably a system malfucntion.
    I would like to suggest you to post an OSS message tot the SAP to the component of PE-LSO-TM. If our official investigations are done and the issue is considered as a failure, we will release for the customers an SAP correction note.
    I hope this helps somehow converge you to the right solution!
    Best regards,
    Zsolt

  • How can you put an Animated Signature in Mail...

    Is it possible to add an animated signature to Mail.
    I have read if you overwrite an existing signature residing in the ~/Library/Mail/Signatures folder as a .webarchive file it will work.
    I have an animation I have built in Photoshop and saved as an animated gif in the Save for Web command. I understand that you need to open this gif in Apple TextEdit and save as an .html file which I can only do if I convert to rich text. Then I need to open the html in Safari and save as a .webarchive which I have done but opening in Safari just gives me all the html code and saving as a webarchive doesn't change this to the animation.
    Then you need to replace the name of the file with name of an existing "fake" signature from the Mail Signatures folder. Which I have done but when I've restarted Mail and tested it, I only get the code in my signature not the animation.
    I can figure where I've gone wrong.
    Can anyone help?
    David

    Ok, I explain:
    Suppose you have a a family with the following members:
    - Father
    - Mother
    and 5 children : a, b, c, d and e.
    So should be able to create a group called "family" composed of FM+a+b+c+de
    Suppose some of the children (let's say: abc) are member of a swimming club that has weekly different training sessions and some now and then participates to inter-club swimming competitions. So all the activities of swimming club are common for a, b and c and should appear in the agenda of each of them.
    Suppose the father and the mother are following dance courses. The same remark is valid here; all the activities of the dance courses should appear in both the agenda's of the father and the mother.
    Suppose the following persons are member of a tennis club (with training hours and also some now and then competition): Motherc+de. The same remark is still valid all the members of the family that are member of the tennis club should see the activities of the tennis club in their own agenda.
    Suppose a number of family members are member of some big band let's say:
    fathera+c+de.
    And here is still always the same remark valid; all the members are supposed to be present at the repetition sessions of this big band and at its public performances.
    To resume: we should be able to create for each of the different clubs a different group with the right members so that as you introduce a club activity you have to do this only once and this activity should then appear in the agenda of each of the club members.
    On the other hand everything (all the persons and all their activities together) should also be visible in a global common agenda of the complete family and also in complete agenda of a selection of a number of family members.
    Luc Plas

  • Help! my Aperture help menu is grayed out

    I'm just getting my brand new Mac Pro set up, moving from a 2 1/2 year old Macbook. I have a long unsolved problem of having several libraries and their related vaults crashing, rendering inaccessible about 15,000 referenced images and their vaults. Typically what happens is that an Aperture library I've been using for a while quits almost instantly after opening, and the library's vault(s) can't be accessed at all. I've spent perhaps 30 1 To 1 training hours and many hours on the phone with appl care on this problem, and I'm very grateful for all their devoted effort, but we haven't had any luck understanding, much less solving, this problem.
    The first time it happened, the library had 6 gigs of images in it from a weekend of shooting. I thought that having 6GBs free (of 55) might have something to do with it, but it kept happening to later libraries even after there were 25 GBs free. With each new library it seemed they would crash at a smaller size, even 1-2 GBs. So my strategy evolved into creating new libraries every few days so they wouldn't crash.
    Has anyone had a similar problem and fixed it? Generally most of the folks helping me don't seem to think it's a computer problem, or a software problem, for that matter. Some think my camera (Nikon D70) might have been sending out an occasional corrupted image, but the crashes have continued with a Nikon D 300 I bought new a month ago, making that theory seem very untenable. I'm hoping that using the beastly Mac Pro will help with at least part of the problem. I needed it anyway because my shooting has become pretty high volume recently (3,000 12 MB images per week).
    Any suggestions on a fix or a strategy for importing this mess into the Mac Pro? It sounds like the safest way to import is by project. I have about 20 libraries, about 5 of which are crashed, and about 100 projects. I'd really like to have the recommended 1-3 libraries, but it's pretty daunting to think of losing all my metadata and edits to a single crash.... Thanks for your interest.

    My above Question should read: "_Several Libraries Quit upon Opening and their Vaults cannot be Accessed_".
    (the grayed-out help menu problem was solved by re-launching Aperture.)

  • Issue in HR reporting

    HI
    We are having an issue in HR reporting and how to report this scenario. 
    If we know that all employees have two characteristics associated with their record, we are trying to report training hours using both characteristics -
    Characteristic 1 has - professional, executive and so forth and the Characteristic2 has RN, Pharmacist, etc.  My report needs to display:
                              Training hours
    Professional (01)           XX
    Executive     (03)           XX
    RNs             (AAA)        XX  (all RNs are professional (01) but not all professionals are RNs (AAA)
    How do we display both professionals and RNs in one hierarchy?  If we create a hierarchy on characteristic 1 with the professional and executive, we are unable to also display characteristic 2 values like RNs, Pharmacists etc.
    Any suggestions for a solution? 
    Thanks
    Kim

    All of those items need to be in one characteristic for them all to display in a single column on 1 report. 
    So, you could create a 3rd info object and on the first pass through your data package in your start routine, load professional, executive, etc...  then pass through the data package again appending your RN's, Pharmacists, etc...
    This will double all values in your report, but then I guess you expect that because of your requirement.
    Typically, I would include both characteristics in the report and then let the user drill down on whichever characteristic they wanted to display.  It's a lot easier for you, doesn't take any extra development time, and the user gets the data they want (just not in the preferred format).  But then again, with the requirement you have, your user will probably turn around and complain that the number of hours are doubled when they look at the total.  I would point that out first and see what they say ... your requirement may change!
    Brian

Maybe you are looking for