LT Replication server job status

Hello,
In our HANA system, under transaction LTRC, we can check status job that "Master Job Status : Running" under tab "Administration data". We have setup E-mail alert using Transaction LTRC --> "Expert function" tab --> status notification settings. so that after every 24 hours we get "Master job status" alert mail. but we want to setup a E-mail alert when Master job stops running at any given time. Can you tell us how can setup that alert, can we configure this using CCMS or through some other alert mechanism?
Thanks,
Urvi

Hello,
Please let me know if there a some way also in solution manager?
Thanks,
Urvi

Similar Messages

All timer jobs don't start (paused in check job status)

Hello,
Some bad things have happend to our SharePoint Server 2010. All timer jobs suddenly stopped running. The last time they ran successfully was 09/26/11. Since that time all jobs have been scheduled to run according to their schedule but don't actually run.
In the Check Job Status view there is a list of jobs scheduled to run 09/26/11 which are currently paused for some reasons, other jobs don't run at all.
Is it possible to unpause these jobs and let other jobs to run? Any ideas would be very much apprecaited. Thank you in advance.

Hi,
Thanks for your post.
Pausable Timer Jobs
You can now create pausable timer jobs. This is done by inheriting from the
SPPausableJobDefinition and overriding Execute(SPJobState) instead of
Execute(Guid). You can then use the current job state (SPJobState) to store values which are retrieved when the job is resumed.
Running jobs on all content databases
Another new timer job derivative type is the SPContentDatabaseJobDefinition.This is a timer job specifically made to perform actions on content databases. The timer job is distributed on the WFE servers and each content database is only
processed by one job. Override the Execute(SPContentDatabase, SPJobState) to add your own processing. The job supports pausing.
Running jobs on all Site Collections
A really interesting new timer job type is the SPAllSitesJobDefinition. This one is derived from the SPContentDatabaseJobDefinition and has a method called
ProcessSite(SPSite, SPJobState) which you override to process the SPSite object. This could be very useful to build site inventories/directories.
Running job on a specific server
The SPServerJobDefinition is a pausable timer job that is designed to be targeted to a specific server (SPServer).
Running jobs for specific services
The SPServiceJobDefinition is another pausable timer job that runs a job on all servers where a specific
SPService has been provisioned. A very similar job is the
SPFirstAvailableServiceJobDefinition which runs the job on the first available server which has a specific SPService installed. If you would like to run a job an all servers you can easily use SPServiceJobDefinition. Then use the timer job service
(which is installed on all servers, except dedicated database servers) and pass
SPFarm.Local.TimerService as the SPService parameter in the constructor.
All of the new specific timer jobs are essentially smart derivatives of the SPJobDefinition but using these new abstract classes will certainly save you some time when you need to target your timer jobs.
I hope that helps.

Job status of Business Rules not reflecting correctly in Hyperion Planning

Hi,
In our Planning Web Application version 11.1.2.1 (Classic application), we have issue with the Business Rules not changing the job status from Processing to Complete.
Essentially giving an indication to users that the job is taking longer than expected.
Having noticed that behavior, when we cross check with Admin credentials (Application Logs ) HBR Launch.log. The End Time of the job is updated promptly.
We have couple of SRs Open with Oracle but they concluded it’s a bug and need to upgrade to 11.1.2.2. But currently we do not have any plans to upgrade to the latest version.
In order to force the Status change to mark it as Complete at the SQL Server backend.
We have to update the status table HYP_JOB_STATUS manually via database update.
But this is laborious process.
Did anyone encounter such issue? Please suggest a feasible option here ?
Thanks,
Venkat
Edited by: 947686 on Dec 18, 2012 6:21 AM

Hello Shiva,
We do not have any issue with calc rules; we are facing this issue with Business rules.
We have looked into the logs in both Applcation logs and Essbase logs nothing found strange except couple of .xcp files were generated in Essbase server. We have sent those .xcp files to Oracle for investigation. We have also noticed that Web Logic server was not hand shaking properly with Hyperion Server. Oracle responded with few application settings which we are already sycn with recommended settings.
We had the same issue in 8 months back and the same repeated now.
Thanks,
Venkat

How to get job status information from printer without using printer's web interface

Hi, all!
I need to resolve problem with logging my printer hp lj 700 m712.
I configure syslog on it, but it sending only status messages ("peripheral low-power state" - for exapmle), I need to register the job status of printer's job on my server.
How can I do that?
Can you help me?

Hi Lexabb,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet Enterprise 700 M712 printer series is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Enterprise 700 Printer M712dnpage helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Tidal Enterprise Scheduler - Get Job status using c#

Is it possible to get the list of jobs scheduled and their status in Tidal Enterprise scheduler using a programming language like C# ?

API depends on your version and you need to have the client installed from Server/DEsktop initiating the API
the PDF document should have been included on you CD2 called Command Line Program Guide
I will use 5.3.1 as an example:
open a command prompt
Browse to C:\Program Files (x86)\TIDAL\Scheduler\client
type in set alias=DEV > example=DEV otherwise it defaults to Admiral
type in SACMD
type HOST I always type in HOST so I can verify what master I am running against (nio need if only one connection)
type in jobmon with your options I included below from doc
[-d date] +display_options [filtering_options] [-b]
It may be of limited use in 5.3.1 because to isolate you need to know Job ID or Alias or some other filter critiera... Job ID is in database jobmst.dbo.jobmst_id which is the unique identified and can be different from alias... depending on your requirements (dashboard?) and how you have organized your jobs a SQL query would be the better option.
DISPLAY
r
Job rule ID
i
Job run ID
p
Parent job group ID
j
Job type (job or job group)
c
Occurrence number
o
Job or job group owner
u
Runtime user
h
Agent The Agent the job runs on
z
Scheduled vs. unscheduled job
t
Job start time
s
Job status
v
Job duration
n
Job name
a
Job alias
q
Queue
x
Exit code
FILTER
-r
rule_id Job rule ID
-p
group_id Parent job group ID
-j
type Job type. You can choose: job group: group, or 1 job: Job, or 2
-o
owner Job or job group owner
-u
run_user Runtime user
-h
agent The Agent name the job runs on
-s
job Status ( Completed Abnormally=103, Normal=101)
-a
alias Job alias
-x
exit_code Exit code
-b
Suppresses the header information

Urgent !!!! JOB STATUS : ERROR SQL-6550 ...

The following error message appears under Job Status of Reports Server Queque Status report:
: ORA-06550: line 1, column 13: PLS-00306: wrong number or types of arguments in call to 'REMOVE_JOB' ORA-06550: line 1, column 7: PL/SQL: Statement
I couldn't find any documentation about the Procedure
REMOVE_JOB.
Could anybody help ????
Thanks a lot !

Are you using "Event based reporting" OR "Database" Job repository ?
1) Enable tracing in $OH\reports\conf\server_name.conf (trace xml element). Look at the logs in
$OH\reports\logs\
This may give some clue. Any exceptions in the trace will give some clues.
2) The script in which the function is in
$OH\reports\admin\sql\rw_server.sql (function remove_job)
3) Apply latest patch and try.
Thanks
Ratheesh
[    All Docs     ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Job status in OEM console is not updated

Hi,
I am using OEM job console to run some batch jobs. When a job is submitted for execution, the job status does not change to started/completed. It always remains in the scheduled status, but when I check the database the job is running and it finishes fine. I checked the agent on the target database and restarted the management server. Any thoughts on what could be the issue?
Thanks
Rk

Whats exactly you are looking ? is there any reason for comparing ?

Publish Server Update status using IIS

Hi, I had setup the WSUS on a 2012R2 for my server environment. My job is to approve the updates and work with server owners (eg. Application team). May I know how to publish the server update status/report using WSUS server with IIS.
My other IT team can go to the site for checking their servers' update status and carry on the manual update job via remote desktop. Rather than remote to each of their server to check the updates been push.
I saw this feature before when I was with my ex-company. The WSUS team will send us a link and I will use the site to sort out those server which belongs to me to verify any new updates been pushed.
Appreciate your feedback soon.

Hi,
As far as I know, there is no web management UI for WSUS.
If we want to manage the WSUS server remotely, we can install the WSUS Administration console.
To download WSUS Administration console, please click the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=5216
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ECC Cluster Enqueue Replication Server

Hi Experts,
I installed SAP ECC EHP5 in a Windows Cluster Environment. I followed all the steps in the installation guide. When I execute the following command to check the status of the Enqueue Replication Server:
enqt.exe pf=<profile> 2
The following message appears:
Nr Man UserName Name-- M -
Arg-- -UsVB-----
-Object- TCOD B
Entries in Backup-File...: 0
Instead of the following message:
Replication is enabled in server, repl. server is connectedReplication is active...
Do I miss any adittional configuration??
The trace file had this information:
trc file: "dev_eq_trc_7804", trc level: 1, release: "720"
Wed Oct 19 14:02:02 2011
Enqueue Info: enque/use_pfclock2 = FALSE
Enqueue Info: enque/use_pfclock2 = FALSE
Enqueue Info: enque/disable_replication = 0
Enqueue Info: replication enabled
Enqueue Info: enque/replication_dll not set
LstRestore: no old replication configured
I manually set enque/disable_replication parameter to 2 because previously was set in the instance profile in 0.
Any ideas?
Thanks a lot.
Kind Regards

Hi Estaban,
The command is "ensmon" not "enqt". Check the example, below;
ensmon pf=<ERS profile> 2
Best regards,
Orkun Gedik

Check The Job Status

Hi SAPsimhas,
My requirement is as below.
I will loop through an internal table and create some files with background processing method.(JOB_OPEN,SUBMIT & JOB_CLOSE)
Now once this job is triggered I need to check the status for that job after maximum 10 mins. Its not neccessary that each job will take 10 mins. only,It can be finished in 2 mins also.
Once the job is finished then I will XCOM that file.
So my question is how to code such timer which will check the job status for that job? I have a FM BP_JOB_READ which returns the job status.
Reply is highly appriciated.

Try this way
do.
    call function 'SHOW_JOBSTATE'
      exporting
        jobcount         = p_jobc
        jobname          = p_jobn
      importing
        aborted          = v_aborted
        finished         = v_finished
        ready            = v_ready
        running          = v_running
        scheduled        = v_scheduled
      exceptions
        jobcount_missing = 1
        jobname_missing = 2
        job_notex        = 3
        others           = 4.
    if v_aborted eq 'X'.
      exit.
    endif.
    if v_finished eq 'X'.
      select single * from tbtcp into wa_tbtcp1
                 where jobname eq p_jobn
                   and jobcount eq p_jobc.
      if sy-subrc eq 0.
        move wa_tbtcp1-listident to p_spono.
      endif.
      exit.
    endif.
    if v_count le 10.
      call function 'ENQUE_SLEEP'
        exporting
          seconds = 60.
      v_count = v_count + 1.
    endif.
enddo.
a®

Unable to get job status via BIP web service

Hi,
I'm scheduling a report job using the method scheduleReport of the ScheduleService web service. The method returns the jobId correctly, then I check the job status using getScheduledReportStatus.
Every time the method returns jobstatus = "Scheduled", but the report is finished. I noticed that BIP schedule a child job with different jobId (why?) and If I use it, the getScheduledReportStatus return a null status.
Using the method getScheduledJobInfo I have all the information, but how can I get the child jodId ?
Best regards,
Alessio

Hi Alessio
I know this was a long time ago but i was just taking a chance:
Quick question: did you get this to work? I can schedule a report using the ScheduleReport sevice, but when i query the status using getScheduledReportStatus, the status remains 'Scheduled', even after the job has run. The job also does not appear in the Job History of the report. The report is set to burst, which it does correctly.
Do you have any ideas?
Thanks very much.

5 error while checking job status

Hi,
We are getting the following error when we are trying to check the status of the process chain through FM 'RSPC_API_CHAIN_GET_STATUS':
5 error while checking job status.
The real scenario is we are using an abap screen with a button on it. when the user clicks on the button we call the FM 'BP_EVENT_RAISE' to trigger the process chain. once the chain is triggered we are having an endless loop to monitor the status of the chain with FM 'RSPC_API_CHAIN_GET_STATUS' untill the chain status turns green ie G.
Now while monitoring the status it randomly throws me the above error. it seems to work sometimes and other times it gives the popup with the said error.
Can anybody help why we get the error.
Regards,
Shashank

Hi Shanshank,
Try to Debug the FM.
Rgds,
Ravi

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

Why data has not been copied from staging DB to Reporting DB even timer job status is success ?

Hello,
I am facing following issue regarding web analytic service for specific date 2014-08-18:
Verified following services which are running and status was success on that specific date 2014-08-18 :
Web Analytics Service
Microsoft Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
Observed latest Web Analytics Setting as below :
LastAggregationDateId
20140817 - The date id of the last successfully completed data aggregation
LastAggregationTime
2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
LastBestBetSuggestionAggregationDateId
20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
LastDataCopyTime
2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
In order to verify the same I have checked as follow:
SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
WHERE [DateId] = 20140818
Above SQL Query has returned ZERO value.
Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
Your help will be much appreciated.
Thanks and Regards,
Dipti Chhatrapati

The image itself has the answer
The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
The Web Analytics service logs this in the “.usage” files.
A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
Regards Chen V [MCTS SharePoint 2010]

Sybase replication server on HA / DR

Hi Experts,
We are in the process of setting up DR environment for Sybase ASE using replication server. The primary site has an HA configured.
My doubt is when we need to install replication server at standby site, what host needs to be specified as the "primary system hostname" - The hostname of CI or the DB server.
Additionally, do we need to install replication server on both nodes of HA cluster? and how would the DR agent configuration work in case of DB failover to the CI node?
Unfortunately, there is very little documentation available online on how to setup the DR environment, apart from SAP note 1891560
Would appreciate your invaluable inputs on this.
Thanks in anticipation.
Regards,
Varun

Hi Varun,
Sorry - I don't have any experience with the IBM solution. So I have comments, but not a solution.
The HADR Solution will work well in HA / cluster systems where the IP address is dynamically re-assigned to the active node. This allows the server configurations to point to just 'one' IP address and the cluster software (examples: MS Cluster, Veritas, HP Service Guard) assigns that IP to which ever node is active.
Using the IBM solution, (based on a quick Google search) it appears we rely on Open Server HA capability to include both addresses in the interfaces file under a single Server name, so that both address can be attempted when making a connection.
Unfortunately, the configurations created by the DR Agent do not support this type of configuration using Interfaces files. Most server address are assigned a single IP address, and most address are assigned directly (not pointing to an Interfaces file entry).
As an example, when the HADR nodes are configured in ASE, you define the other nodes in the HADR group with a command like the following:
sp_hadr_admin addserver, <node_name>,<server_name>
To use a interfaces file name for the server name, the command might look like:
sp_hadr_admin addserver, 'D01_Site1', 'D01'
But the configurations created by the DR Agent use a host:port syntax instead of an interfaces file server name, like:
sp_hadr_admin addserver, 'D01_Site1', 'host1.my.domain.corp:5001'
The point I am trying to make is that even if we edit the interfaces files to use the additional HA addresses, other configurations like the one above would need to be discovered and changed as well.
Unfortunately, even if all this reconfiguration work is accomplished successfully, the DR Agent itself does not use interfaces files and has no support for specifying an alternate HA address. And I am not aware of any workaround for that limitation.
In summary, I think that short answer is that we don't have HADR support using DR Agent for HA environments without a dynamic IP address. It might be possible to manually reconfigure some of it, but without support in the DR Agent itself, you would be missing failover and monitoring support the DR Agent provides.
Sorry that I do not have a more encouraging answer.
Regards,
Stephen

LT Replication server job status

Similar Messages

Maybe you are looking for