LV2010 SP1 Installer Build Issue- Cannot find the file it need on requesyed disk
I am migrating a project from LV8.6.1 to 2010SP1 and had issues building the installer that I was finally able to overcome, but something is amiss with the process.
Brand new development PC, running XP SP3, fresh install of LV2010SP Dev Suite and also installed VDM2010 SP1 (even though the project does not use any vision modules).
- Copied 8.6.1 project to the PC, did a mass compile of it and built the exe from scratch without issues.
- Now it’s time to build the installer from scratch. Additional Installers were:
LV2010 RTE, MAX 4.7, NI-DAQmx Full App Devel Support 9.2.3, and NI-VISA 5.03.
- Get the message that it will need some disks to build it which I have on hand:
Dev Suite DVD#2, Drivers DVD, and VDM DVD (huh, why VDM?)
- The installer build progresses through the first two disks fine but will not find the files it needs on the VDM DVD (it is looking for “NI System Components”).
- Installer build bails out with a message box and no installer is created (1st attachment). The installer logs are also attached.
- Try the build process gain, same result.
- Copied the VDM DVD to my hard drive and point it to that folder to get the files, same result.
- Try again saying I don’t have the disks on hand. It lists some alternate disks to use but to get all the files it still wants the VDM DVD to complete it. Not much use, the build still fails.
- Try one last time again selecting that I don’t have the disks on hand. I now notice that the folder the VDM was copied to on the hard drive is an option to select. Select that one and lo and behold the installer is built successfully.
So I guess it boils down to:
- Why does it need the VDM DVD when there are no components of vision used?
- Why can’t the installer find the files it needs on the VDM DVD or a copy of the DVD on the hard drive?
- Why will it only work if I choose that I do not have the disks and point it to a copy of the DVD that resides on the hard drive?
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Attachments:
MessageDuringVDMCopyForInstaller2010.JPG 127 KB
TowersSPCv225Installer_build.log 3126 KB
TowersSPCv225Installer_edit.log 915 KB
Che:
It gave no specific indication of what it was looking for, the only message that came up was in the screenshot jpg I originally posted.
The only other vague clue I had was it needed NI System Component from the VDM DVD.
Does not make sense that it required the VDM DVD since there were no vision components in the project. I presume it would have taken VISA off of the Dev Suite DVD's.
I can't replicate the problem since I had the build cache the system components required for the project. I'd rather not start deleting folders at this point since I have a viable installer at this time (after many hours of troublshooting expended).
Thanks
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Similar Messages
-
When I upgraded to the latest Firefox on my Windows 7 PC , I get a 7-Zip Error Box stating " The System cannot find the file specified". This happens approximately two thirds into the installation. I have tried turning the Virus checker off and re-installing, but to no avail.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Try this:
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
*Start the installation with a double-click on the desktop icon
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
Visual Studio gives the following error:
midlrt : error MIDL4034: Failed to load a dependency file. Windows.winmd (HRESULT:0x80070002 - The system cannot find the file specified. )
This is because Visual Studio is looking for a WinMD file that contains the base types. Unfortunately the metadata path passed by default to MIDL through Visual Studio does not resolve to the correct file.Work around:
Update the "Additional Metadata Directories" for MIDL to include the Windows.Foundation.FoundationContract.WinMD
To update the “Additional Metadata Directories” in Visual Studio, do the following:
1) Right click on your C++ Project file.
2) Choose properties.
3) Under Configuration Properties, click MIDL
4) Under MIDL choose “Command Line”
5) In the Additional Options text box enter:
/Metadata_dir "C:\Program Files (x86)\Windows Kits\10\References\Windows.Foundation.FoundationContract\1.0.0.0”
or on X86 machines
/Metadata_dir "C:\Program Files\Windows Kits\10\References\Windows.Foundation.FoundationContract\1.0.0.0” -
Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"
Hi forum Fellows,
I have the following failure scenario:
1. A user receives an e-mail with an attachment.
2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
5. The effect is that the user cannot send the e-mail.....
------------------------------ TROUBLESHOOTING -----------------------
- I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
---- After: Only one file is written to OutlookTemp. That is FileX.pdf
- Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
**** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
on to be there.
- Going with a totally clean OutlookTemp folder does not help.
------------------ NOW WHAT ---------------
- The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
------------------------------ TECH. INFO -----------------------
Outlook 2010 v14.0.7132.5000
Outlook bit depth: x86
Running on a 2008R2 SP1 TS environment.
No antivirus on the TS
Looking forward to hear from you.
Regards The Red Baron
Red BaronHello Red Baron,
Although not a complete answer, the way to treat attachments in emails require some discipline:
1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
the new version etc.
2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
3. Having any (unsaved) document open for several hours should
never occur. What if there is a power outage?
Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
These are the rules I teach my customers and they never leave any document unsaved for hours ...
Best regards George -
RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."
Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
a fresh win 8.1 enterprise install on a Hyper-V VM.
I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
event log says:
Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
"C:\RSAT Windows8.1-KB2693643-x64.msu" ")
CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
You can also re-try downloading the files to see if your original download was just corrupt.
Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
It was a permissions issue! Thanks so much Bruce!
I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
1) double clicked the installer.
2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
3) Installation was successful.
Not really sure why this happened as it doesn't make sense but it's working now :-) -
"The system cannot find the file specified" - New to MVSE 2013
Hey all,
I have downloaded Visual Studio Express 2013 for Windows Desktop and am currently working my through the introduction sessions on: http://www.cplusplus.com/doc/tutorial/program_structure/
I did not get far before i encountered this error whilst trying to run my segment of code. I am completely new to all this so please bear with me :)
The error window said:
"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
The system cannot find the file specified.
Would love some simplified help please if this is indeed the right area of the forum to post this in.
Many thanks!Hi Jono112,
>>"Unable to start program 'c\users\username\documents\visual studio 2013\Projects\ConsoleApplication1\Debug\ConsoleApplication1.exe'.
Based on your issue, to check if the issue is related to the VS IDE or your specified C++ project, I suggest you can refer the following MSDN document to check if you get same issue.
https://msdn.microsoft.com/en-us/library/ms235629.aspx
(1)you get same error in the new c++ console application, maybe you will need to repair or re-install the VS2013 check this issue again.
(2)If you did not get the issue in the new c++ console, so I suggest you try to clean and build your c++ console application, then debug it again.
Or you can upload your C++ console application to OneDrive and then copy link here, we will reproduce your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cannot find the file 'startWebLogic.cmd"...
I installed to 7.0+Cajun to d:\bea3 as my beahome. I have two other BEA homes d:\bea
and d:\bea2. I made my user-domains folder name to be "domains". Otherwise its
a standard install. I'm on NT.
When I try and start the WLS server from inside Workshop, I get the following
error message:
"Cannot find the file 'startWebLogic.cmd' (or one of its components). Make sure
the path and filename are correct and that all required libraries are available."
I dismiss the dialog and Workshop will continue showing a progress bar and I have
to cancel it.
Looks like a standard path problem. Is anyone else getting this out of the box?
Should Workshop.cmd be setting up the path to the sample workshop WLS? An easy
workaround is to start the server manually outside of Workshop.
PJLActually, Peter and all,
No need to send me the files listed below as I woke up after re-reading your
post. There is an issue we are tracking down with regards to what Mike
Wooten said on an earlier post and those people running on Windows NT4.x
only, seems the start command changed somewhat for the better in Win2K.
If you ARE running on Windows 2000 and you are still seeing the problems
outlined below, please reply back with the files attached and we will get
someone on looking at your issue.
Since this beta is targeted at Win2K and Solaris only, the solution will
have to be starting it from the start menu which you have mentioned
previously. We are tracking this as an issue from beta and will probably
support NT4 for the GA.
Thanks for letting us know !
Art
"Art Becker" <[email protected]> wrote in message
news:[email protected]...
Peter,
Thank you for your question. In order for me to better narrow down the
problem, would you please either post or send me the Jellybeans.properties
file from d:\bea2\weblogic700b\samples\workshop and your .Jellybeans (note
the period at the beginning) from your %systemdrive%\documents and
settings\%username% folder ?
This information should help us determine what the issue you are running
into is. Other people are seeing this issue out of the box though I have
had trouble reproducing the problem and need some more input to determine
where it lies.
The installer should be setting the properties for the "start path"
correctly during install.
Thanks,
Art
"Peter Laird" <[email protected]> wrote in message
news:[email protected]...
I installed to 7.0+Cajun to d:\bea3 as my beahome. I have two other BEAhomes d:\bea
and d:\bea2. I made my user-domains folder name to be "domains".
Otherwise
its
a standard install. I'm on NT.
When I try and start the WLS server from inside Workshop, I get thefollowing
error message:
"Cannot find the file 'startWebLogic.cmd' (or one of its components).
Make
sure
the path and filename are correct and that all required libraries areavailable."
I dismiss the dialog and Workshop will continue showing a progress bar
and
I have
to cancel it.
Looks like a standard path problem. Is anyone else getting this out of
the
box?
Should Workshop.cmd be setting up the path to the sample workshop WLS?
An
easy
workaround is to start the server manually outside of Workshop.
PJL -
Error message "The system cannot find the file specified." when reinstalling C3180 drivers
Hello,
I experienced scanning problems with my C3180 and the error message indicated several solutions, including to reinstall the driver.
I worked my way through the list of fixes to this option. I uninstalled the drivers, downloaded
File name:
AIO_CDA_NonNet_Full_Win_WW_130_140.exe [1/1, 290.27M]
from www.hp.com/support and attempted to install.
Just after the accept licensing screen, the system begins a screen with four steps, the first of which is Checking System. Shortly after starting this, I receive the error message "The system cannot find the file specified.". The file name may be in the message header, but I cannot determine it due to the path length. It is off the displayed screen. (see screen image capture)
Closing the pop-up error message or clicking OK terminates the installation.
I am re-installing on a Dell Latitude E6510, running Windows 7 Professional, Service Pack 1, 64 bit. The printer was connected via USB, but I have disconnected for this stage of the install.
I appreciate any assistance/advice you can offer.
KellyHi justkelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the printer to your computer.
I have a link that I would like you to click on. In the steps on the link, please do step 1 and step 2 seeing that you are using Windows 7.
Installation issues.
Please let me know if this resolved your issue. I will be more than happy to offer more assistance if the link does not resolve your issue.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Hi,
I want to obfuscate my jar file. for this purpose i followed the steps below.
1. Copied proguard.jar in C:\WTK2.5.2\bin
2. Now opened the file ktoolbar.vm , which is present in C:\WTK2.5.2\bin
my ktoolbar.vm looks like this
{color:#666699}C:\PROGRA~1\Java\JDK16~1.0_0\bin\java -Dkvem.home="%KVEM_HOME%" -Djava.library.path="%KVEM_HOME%/bin" -Dsun.java2d.ddlock=true -Dsun.java2d.gdiblit=false -cp "%KVEM_HOME%/wtklib/kenv.zip";"%KVEM_HOME%/wtklib/ktools.zip";"%KVEM_HOME%/bin/JadTool.jar";"%KVEM_HOME%/bin/MEKeyTool.jar";"%KVEM_HOME%/wtklib/customjmf.jar";"%KVEM_HOME%/lib/j2me-ws.jar";"%KVEM_HOME%/lib/j2me-xmlrpc.jar";"%KVEM_HOME%/bin/schema2beansdev.jar";"%KVEM_HOME%/bin/j2me_sg_ri.jar";"%KVEM_HOME%/bin/jaxrpc-impl.jar";"%KVEM_HOME%/bin/jaxrpc-api.jar";"%KVEM_HOME%/bin/jaxrpc-spi.jar";"%KVEM_HOME%/bin/activation.jar";"%KVEM_HOME%/bin/mail.jar";"%KVEM_HOME%/bin/saaj-api.jar";"%KVEM_HOME%/bin/saaj-impl.jar";"%KVEM_HOME%/bin/xsdlib.jar";"%KVEM_HOME%/wtklib/nist-sip-1.2.jar";"%KVEM_HOME%/wtklib/JainSipApi1.1.jar";"%KVEM_HOME%/wtklib/jain-sip-presence-proxy.jar" com.sun.kvem.toolbar.Main{color}
3. my project or my workspace is at location D:\workspace\WTK
4. Also my wtk is located at C:\WTK2.5.2
5 Now i renamed ktoolbar.vm to ktoolbar.bat and the edited the file then added 2 lines at the beginning of ktoolbar.bat
SET USER_HOME=D:\workspace\WTK
SET KVEM_HOME=C:\WTK2.5.2
6 Also i added -Duser.home=%USER_HOME% in the next line.
7 Now my ktoolbar.bat looks like this.
{color:#800080}SET USER_HOME=D:\workspace\WTK SET KVEM_HOME=C:\WTK2.5.2 C:\PROGRA~1\Java\JDK16~1.0_0\bin\java -Dkvem.home="%KVEM_HOME%" -Duser.home=%USER_HOME% -Djava.library.path="%KVEM_HOME%/bin" -Dsun.java2d.ddlock=true -Dsun.java2d.gdiblit=false -cp "%KVEM_HOME%/wtklib/kenv.zip";"%KVEM_HOME%/wtklib/ktools.zip";"%KVEM_HOME%/bin/JadTool.jar";"%KVEM_HOME%/bin/MEKeyTool.jar";"%KVEM_HOME%/wtklib/customjmf.jar";"%KVEM_HOME%/lib/j2me-ws.jar";"%KVEM_HOME%/lib/j2me-xmlrpc.jar";"%KVEM_HOME%/bin/schema2beansdev.jar";"%KVEM_HOME%/bin/j2me_sg_ri.jar";"%KVEM_HOME%/bin/jaxrpc-impl.jar";"%KVEM_HOME%/bin/jaxrpc-api.jar";"%KVEM_HOME%/bin/jaxrpc-spi.jar";"%KVEM_HOME%/bin/activation.jar";"%KVEM_HOME%/bin/mail.jar";"%KVEM_HOME%/bin/saaj-api.jar";"%KVEM_HOME%/bin/saaj-impl.jar";"%KVEM_HOME%/bin/xsdlib.jar";"%KVEM_HOME%/wtklib/nist-sip-1.2.jar";"%KVEM_HOME%/wtklib/JainSipApi1.1.jar";"%KVEM_HOME%/wtklib/jain-sip-presence-proxy.jar" com.sun.kvem.toolbar.Main{color}
8 Now i opened the command promt and i executed the bat file.
9 Now when i try to open the WTK toolkit it gives me the following error
Fatal error : File: C:\WTK.2.5.2\bin\ktoolbar.vm does not exist
Please help me to resolve this issue or suggest me some different way.
Also i would like to tell that my project is completely build using netbeans 6.5 . but when i try to make the obfuscation level high using the scroll that is provided by netbeans , it gives me following error.
{color:#ff0000}C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\nbproject\build-impl.xml:459: Error while expanding C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated.jar
java.io.FileNotFoundException: C:\Documents and Settings\SShete\My Documents\NetBeansProjects\vtms_test_lwuit_Backup\build\obfuscated.jar (The system cannot find the file specified)
BUILD FAILED (total time: 8 seconds){color}
Also i dont know what changes are to be done to the build.xml so that obfuscation can be done .
Thats the reason why i am now opening the same project using wtk and trying to obfuscate it.hi....
i have tried another way out ,
i followed the procedure below
In order to integrate this plug-in in the toolkit, you'll have to put the following lines in the file {j2mewtk.dir}/wtklib/Linux/ktools.properties or {j2mewtk.dir}\wtklib\Windows\ktools.properties (whichever is applicable).
obfuscator.runner.class.name: proguard.wtk.ProGuardObfuscator
obfuscator.runner.classpath: /usr/local/java/proguard/lib/proguard.jar
Please make sure the class path is set correctly for your system.
Once ProGuard has been set up, you can apply it to your projects as part of the build process. The build process is started from the WTK menu bar:
Project -> Package -> Create Obfuscated Package
The Toolkit obfuscates other sample projects
However now my project gets build without errors , but when i try to create a obfuscated package it gives me the following error
Error preverifying class bc
VERIFIER ERROR bc.a(Z)Lhx;:
Incompatible object argument for invokespecial
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
Please help.. -
Hello,
I'm trying to install a VSTO on a clients machine and get the following error message.
Could this be something wrong with the .Net Version?
Application Domain: AWAddinInstaller.exe
Assembly Codebase: update files/AWAddinInstaller.exe
Assembly Full Name: AWAddinInstaller, Version=9.2.0.14, Culture=neutral, PublicKeyToken=null
Assembly Version: 9.2.0.14
Assembly Build Date: 11/12/2013 12:12:58 PM
Exception Source: mscorlib
Exception Type: System.IO.FileNotFoundException
Exception Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
Exception Target Site: nLoadFile
---- Stack Trace ----
System.Reflection.Assembly.nLoadFile(path As String, evidence As Evidence)
AWAddinInstaller.exe: N 00000
System.Reflection.Assembly.LoadFile(path As String)
AWAddinInstaller.exe: N 00084
AWAddinInstaller.AWAddinInstaller.RegisterAddin(forceVSTO As Boolean)
AWAddinInstaller.exe: N 00602Hello AntronD,
The installer complained that The system cannot find the file specified. However I'm confused that why the VSTO is related to AWAddinInstaller.exe.
Could you please navigate to your %temp% folder and search for your VSTO logs out and paste it here? I need it to check for details.
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
When downloadin​g my printer, I get "the system cannot find the file specified
My printer all of a sudden did work. So I decided to update. Someting went goofy. So I tried reinstalling, and now when it get to applying updates, I get the notice "The system cannot find the file specified" HELP
Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists run the following tool:
ftp://ftp.hp.com/pub/printers/datfileremover/installdatfileclean.exe
And then run the installation file and check for any difference
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I am getting error on creating even the empty web application project. The error message is as given below:
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
I am using following build of Visual Studio:
Visual Studio Professional 2013. Version 12.0.30723.00 Update 3
Looks like it is the problem with the installation of the visual studio. But I can't take risk of re-installing now because it would stop my going on development work.
Any would help to resolve this would be appreciated.
P.S. I am also having Visual Studio 2010 and Visual Studio 2012 Ultimate on my system.
Regards, RandeepHello Randeep,
Will you get the same error when creating any other apps, like C# WinForm?
If only web application project has the problem, you can try the following to reset the templates:
Please open Windows Explorer, and navigate to <Visual Studio Installation Path>\Common7\IDE (by default is C:\Program Files \Microsoft Visual Studio 12.0\Common7\IDE);
Delete the ItemTemplatesCache, ProjectTemplatesCache folder;
Open Visual Studio Tools/Developer Command Prompt for VS2013
under Start menu -> All Programs -> Microsoft Visual Studio 2013 -> Visual Studio Tools (run it with Administrator privilege: right-click the program -> Run as administrator);
Run the devenv /InstallVSTemplates switch;
Run the devenv /Setup switch
If all your projects get this error, please try repair the installaiton from control panel first. By the way, can you use Visual Studio Web projects before you get this error? And have you tried to use the Visual Studio Update 4, I see you still used
Update 3, is there any reason for you to still use the Update 3 version?
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Issue: We have upgraded TFS 2013 App Server and Build Servers from TFS 2013 RTM to TFS 2013 update 4. Everything looks good but we are receiving the below error:
Could not load file or assembly 'LibGit2Sharp, Version=0.13.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Kindly share your thoughts/inputs to resolve the issueHi John,
Hope there is nothing wrong with the update.
Yesterday, Our developers were troubleshooting the issue with the builds and found that
Build Activities dll has the reference of LibGit2Sharp.dll
version 01.12.0.3051.0. After TFS upgrade, Build activities does not have a reference for the new version of
LibGit2Sharp.dll [required] which has caused the issue in the build process.
Error: Could not load file or assembly 'LibGit2Sharp, Version=0.13.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Resolution: New version of LibGit2Sharp.dll
was added and referenced to Microsoft.TeamFoundation.Build.Activities.dll
which has resolved the issue with the builds.
I think this should be referenced somewhere regarding TFS Update 4 so that everyone will be able to spot the issue and fix the issue without any issues. -
Hi,
I am facing an issue when I deploy the application to Azure. Not sure what's causing the issue, It runs fine when debugged locally.
XmlSerializer s = new XmlSerializer(typeof(List<SomeClass>));
Below exception is thrown :
Could not load file or assembly 'mscorlib.XmlSerializers, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
System.IO.FileNotFoundException
I have set to "CopyToLocal = True" for System.Xml dll in the references, this does not fix the issue. The application and all its required projects are running under .NET 4.5.
Anybody faced this issue earlier ? Appreciate any help.
Thanks.I'm guessing now. but:
The system might be generating a serializer for the whole of mscorlib, which could be very slow.
You could probably avoid this by wrapping the system type in your own type and serialising that instead - then you'd get a serializer for your own assembly.
You might be able to build the serializer for mscorlib with sgen.exe, which was the old way of building serializer dlls before it got integrated into VS.
Davide 'n3wt0n' Benvegnù
If you found my answer helpful, please vote it.
If you think that my answer resolve your issue, plase "Mark it as answer". -
Hi,
Please see titlte. When I try to apply an CM captured WIM via an MDT task sequence, it starts, applies but stops after 15 minutes.
Logfile says it "cannot find the file specified".
Full error: "Installation of image 3 in package mypackage failed to complete. . The system cannot find the file specified. (Error: 80070002, Source: Windows).
Though the image IS there, redistributed it (if it wouldn't be there the task sequence would not start).
Please advise.
J
Update: could it be the fact I'm using an old (SCCM 2012) MDT wim? If I need to recreate the WIM boot image, where do I get the SCCM 2012 R2 boot wims?
Jan HoedtSee how to manually re-create your boot images
http://myitforum.com/myitforumwp/2013/08/01/how-to-create-configmgr-2012-boot-images-from-scratch/
http://www.niallbrady.com/2013/10/09/how-can-i-manually-add-winpe-5-boot-images-to-system-center-2012-configuration-manager-sp1-cu3/
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
During automatic creation of the purchase requisition to operation 0010
Hi, Problem occurs in automatic cration of PR. Error : During automatic creation of the purchase requisition to operation 0010, an error (06 532) occurred:message c2325 Regards, Vivek
-
Hello I have a lot of experience with iDVD and have used it to create many slide show/music DVDs but have never worked with iMovie. My son recently created a DVD from a VHS tape which had been created from old 8mm movies. I now want to edit that DVD
-
Apple keeps asking for password and not recognising it
Apple keeps asking for my password and not recognising it. Can't use facetime at all. Everything else works. Please help.
-
Hello every body, I'm DBA (Oracle) and I've been replacing a System Administrator who left suddenly the company, I work on iplanet messaging server 5.2 The company use a domain like email.company.xx it's the server root so we can send and receive wit
-
Importing Address Book Backup file [.abbu]
Hi I just wondered if anyone has ever imported from a .abbu file successfully? I have an iMac and an old Powerbook, and have to update the contacts in Address Book on my Powerbook when I go on a trip. So I make Backup files from Address Book on my iM