LVFPGA - Process "Translate" failed

Hi
Currently using LVFPGA 2013 SP1
I'm used to compile my code oftenly, which happens to be necessary when using the FPGA module
Today, I started to get a "Process "Translate" failed" message in the Xilinx Log while trying to compile. The compilation is not aborted and still running
Same problems have already been listed here and here, and issue is supposely fixed in LVFPGA 2014 (associated CAR 428544)
We won't probably change IDE version to 2014
So that here follow my questions:
1. Is the compilation process going to generate a working bitfile as this post suggests ?
2. Any information about the problem (why is it happening?). Couldn't find any helpfull CAR description
3. What elements in the code I'm trying to compile may lead to the compilation to fail/take that much time ? Any recommendation/workaround ?
Thanks for help
Mathieu
Mathieu Steiner, Test System Engineer, Safran Engineering
CLD, ISTQB
Solved!
Go to Solution.

As a follow-up, in case someone ends up reading this post, with a similar issue
It happens that the previously listed CAR is linked to FIFOs. I have no FIFO in my code, so that my problem is not linked to this CAR.Compiling in LV 2014 still shows the same message
There are several translate processes within the same Xilinx compile process. First one may fail, but the second one should be successfull. This is expected; the compile process is behaving as expected.
We still can't explain why my code took 4 hours to execute once, whereas it only takes 1 to 2 hours now
Mathieu Steiner, Test System Engineer, Safran Engineering
CLD, ISTQB

Similar Messages

OPMN Process Manager failed to start - libmodapi.so libclntsh.so not found

Hi all,
I am completely new to Oracle in its entirety. I am trying to install Oracle Enterprise Manager Grid Console 10.2.0.1.0 on Oracle Enterprise Linux 5.1 through the OUI using the new database install. When I get to setting up the Oracle Application Server, it tells me the OPMN Process Manager failed to start, tells me to check the logs in /oms10g/opmn/logs, and to start OPMN manually before hitting retry.
The log files in that directory do not seem to contain any errors.
When I run ./opmnctl stopall, ./opmnctl startall, ./opmnctl status, I get no obvious errors, and then the following:
DSA ~ DSA ~ Down
HTTP_Server ~ HTTPServer ~ Alive
LogLoader ~ logloaderd ~ Down
dcm-daemon ~ dcm-daemon ~ Down
OC4J ~ home ~ Alive
WebCache ~ WebCache ~ Alive
WebCache ~ WebCacheAdmin ~ Alive
When I do ./opmn start I get the following:
./opmn: error while loading shared libraries: libmodapi.so: cannot open shared object file: No such file or directory
When I do a ldd ./opmn I get the following errors:
libmodapi.so => not found
libclntsh.so.10.1 => not found
I am assuming my problem is that these two libraries are not linked in. I have looked through the forums, and found closely related threads, but none that seemed to help, most notably changing my PATH. If anyone has any suggestions, I would welcome them. Thanks for your help.
Sincerely,
Don

Hi All,
We all agree that best practice involves a test installation. My original post was about a problem I was having with the creation of my test bed. I did create my own manual, which I am sure is not the best manual ever created, but does work to get the software installed. If it is proven out, I will post it to try and return something to the community.
In order to do this, I needed to read thousands of pages of documentation so far, which does not even scratch the surface of the total amount on OTN. I am still revising my instructions as I find that the documentation commonly assumes the reader has been installing Oracle for some time and is fully aware of all the appropriate acronyms and the entire logical and physical structure of the database. In order to just read many of the documents, I had to draw out a map of Oracle on a whiteboard as I went. As a systems administrator, should I have to search through all those papers, manuals, the web, etc. and try to gain an advanced DBA understanding to get a working default installation? Perhaps it seems like I am just a new user who is whining, but how many programs can you think of where this type of effort is required?
In looking at the relationship between the DBA and the Systems Administrator, where should we draw a line between their tasks?
Should the DBA have to learn how to assess appropriate server hardware, and then install and administrate every flavor of Windows, UNIX, Linux, etc. in any given environment? Should a DBA be required to build a Linux kernel, configure Active Directory, or install Solaris before installing Oracle?
Should the Systems Administrator have to learn the nuances of installing and optimizing Oracle databases in order to just put the base software on the system and configure the kernel so it is ready for a DBA?
More interesting, as stated above, I could hand you the Gentoo Handbook, and without knowing a single thing about Gentoo Linux, you would have a default installation of the Gentoo OS. You could also grab step-by-step instructions for a default installation of MySQL on Gentoo, or a myriad of other programs, for that matter. This would hardly replace the Gentoo systems administrator or MySQL DBA, but it does serve a very valid purpose of enabling the systems administrator and DBA. Shouldn’t Oracle have something similar?
I would think the Systems Administrator knowledgeable in the OS and Kernel should be able to perform the first half of the installation task where they are more likely to be an expert, and then allow the DBA to create and optimize the databases they install, which they in turn can spend years learning how to do. Time that the DBA spends learning the OS or time the Systems Administrator spends learning Oracle is valuable in the long run, but it is also extra time to get the initial database up and running. One of the largest reasons IT personnel exist at all is to keep users from having to spend too much time learning about their computers to get their work done. Shouldn’t this also translate between IT groups?
Databases are one of the few software installations that systems administrators commonly don't have to maintain on corporate servers. The best comparison I know of is web services. In this manner web servers are very similar, and are commonly installed by a team as well. I am perfectly capable of creating a default install of Apache, Tomcat, or IIS from step-by-step instructions provided by Apache or Microsoft without much more tailored information than the IP address and system name we are going to use to fill in the blanks during the installation.
While I have performed the role of sole IT staff at a small software engineering company, and have therefore been the SysNetWebSecDB admin hydra in the past, in larger companies there seems to be no problem with having the system administrator create a default installation of Apache or IIS, having the network team configure the switches and DMZ, and having the web team customize the server and design the site without each of them having to know everything.
So the above is a good idea and I would encourage
them to do it because after that, it makes them
stonger than when they use an already completed one
to install.Sometimes there is time to sit down and read all the instructions and become a more robust IT professional. Sometimes there is only time to read the Getting Started section and you have to read the full instructions and optimize later if there is time. Sometimes you have outside influences that mean it has to get done in less time than it should, whether or not the justification for rushing is reasonable.
Should I plan to read every knowledge base article ever published by Microsoft in order to create a test bed installation of Windows 2008? Honestly, I’d still be reading the NT4 docs.
Not only does not every business have a DBA, or the money to hire one, sometimes the business does not want to do so, or sometimes the security is such that the DBA is not part of the unit allowed to utilize administrative access on the servers. That doesn’t mean they don’t need a database tomorrow.
As an IT professional, I will never be able to come close to encompassing the amount of knowledge I actually could use to do my job. I try to specialize in a few areas so that I have the ability to keep up with the exponential rate of IT expansion, but I basically consider a vast part of my job being constantly thrown into the deep end, and, fair or not, getting things done anyway. Hopefully that makes me good at my job. The question is how much time and effort I should need to apply before I can get to a reasonable starting point where everyone else can do their work too.
There
is normally no single document to achieve or complete
and installation unless the bespoke type. Apart from
the Install Guide, there could be Readme, Release
notes, Adendum etc. While I noted in a previous post that I shouldn't be too hard on Oracle in trying to document such a massive effort, that doesn’t mean that their documentation doesn’t need work. Why is the documentation for a single product spread out over tens of thousands of pages? It should be obvious that this has resulted in redundant and often conflicting documents, including the dozen readme documents in the installation files, the readme documents in the installed files, the install guide, the readme and addendum for each of those, the release notes for each of those, and a new set for each patch.
Obviously, for any installation, I need to complete a document for my own environment that contains the proper network configuration for our own LAN, or the proper partitioning. I do this for any program. Oracle needs me to change the name of the OS install to get their installer not to error out on their own OS. If OFA is so desirable, why not make the default install explain and follow OFA? Basic issues like this are highly avoidable, and shouldn’t be seen by the end user, even if in this case the end user is a highly technical audience capable of adjusting.
It will hard to get a single document because they
will be platform dependent and what someone did in
their install, may not always work everywhere.Again, please note that Oracle has "released" an OS that they intend for people to use on their Oracle validated hardware as a premier platform for their Oracle database. It isn't a stretch to feel that Oracle should then be able to provide valid, step-by-step instructions for a default installation of their own software, on validated hardware, on their own OS. I’m not expecting an optimized and populated database, but if the hardware, OS, and software are all under Oracle’s control, there aren’t really any variables other than machine name and IP address for a default install.
Hopefully my current knowledge will work for the time being, and I will be able to optimize appropriately in the future as I can.

Using Alert Framework to send email notifications when Process Chain fails

Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
Ken

Interesting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken

One or more post-processing actions failed. Consult the OPP service log for details.

hi expert plz help me i can't understand here what can i do to resove this error.
here is the logfile details of output post processor
ebs- 11i (11.5.10.2)
os - rhel 4
[9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 2984174.
[9/2/13 4:54:48 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[9/2/13 4:54:48 PM] [Thread-14] Service thread starting up.
[9/2/13 4:54:48 PM] [Thread-15] Service thread starting up.
[9/2/13 4:59:34 PM] [OPPServiceThread0] Post-processing request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Executing post-processing actions for request 21672063.
[9/2/13 4:59:35 PM] [2984174:RT21672063] Starting XML Publisher post-processing action.
[9/2/13 4:59:35 PM] [2984174:RT21672063]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[090213_045936406][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[090213_045936407][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[090213_045936408][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[090213_045936408][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[090213_045936408][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936409][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[090213_045936409][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=demo.oriplast.com)(PORT=1526)))(CONNECT_DATA=(SID=ORIDEMO)))]
[090213_045936409][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[090213_045936409][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[090213_045936410][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[090213_045936410][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[090213_045936418][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[090213_045936418][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[090213_045936419][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[090213_045936419][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[090213_045936419][][EXCEPTION] [DEBUG] [APPLTMP]:[/u03/ORIDEMO/LIVE_APPL/livecomn/temp]
[090213_045936419][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[090213_045936419][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[090213_045936419][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[090213_045936419][][EXCEPTION] [DEBUG] [dbcfile]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936419][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[090213_045936420][][EXCEPTION] [DEBUG] [path.separator]:[:]
[090213_045936420][][EXCEPTION] [DEBUG] [APPLCSF]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[090213_045936420][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[090213_045936420][][EXCEPTION] [DEBUG] [user.country]:[US]
[090213_045936420][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[090213_045936420][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[090213_045936421][][EXCEPTION] [DEBUG] [user.dir]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo]
[090213_045936421][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[090213_045936421][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[090213_045936421][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[090213_045936421][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[090213_045936421][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936421][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[090213_045936422][][EXCEPTION] [DEBUG] [line.separator]:[
[090213_045936422][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936422][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[090213_045936422][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[090213_045936422][][EXCEPTION] [DEBUG] [cpid]:[2984174]
[090213_045936422][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[090213_045936423][][EXCEPTION] [DEBUG] [java.library.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u03/ORIDEMO/LIVE_APPL/liveora/iAS/lib:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/i686/native_threads:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/network/jre11/lib/linux/native_threads:/u03/ORIDEMO/LIVE_APPL/liveappl/cz/11.5.0/bin:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[090213_045936423][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[090213_045936423][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[090213_045936423][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[090213_045936423][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-82.ELsmp]
[090213_045936424][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[090213_045936424][][EXCEPTION] [DEBUG] [user.home]:[/home/appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[090213_045936424][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[090213_045936424][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[090213_045936424][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[090213_045936424][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[090213_045936424][][EXCEPTION] [DEBUG] [java.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/java/appsborg2.zip:/u03/ORIDEMO/LIVE_APPL/livecomn/java/apps.zip:/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/forms60/java:/u03/ORIDEMO/LIVE_APPL/livecomn/java]
[090213_045936424][][EXCEPTION] [DEBUG] [user.name]:[appdemo]
[090213_045936424][][EXCEPTION] [DEBUG] [DBCFILE]:[/u03/ORIDEMO/LIVE_APPL/liveappl/fnd/11.5.0/secure/ORIDEMO_demo/oridemo.dbc]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[090213_045936425][][EXCEPTION] [DEBUG] [java.home]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre]
[090213_045936425][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[090213_045936425][][EXCEPTION] [DEBUG] [user.language]:[en]
[090213_045936425][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[090213_045936425][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[090213_045936425][][EXCEPTION] [DEBUG] [logfile]:[/u03/ORIDEMO/LIVE_APPL/livecomn/admin/log/ORIDEMO_demo/FNDOPP2984174.txt]
[090213_045936425][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[090213_045936425][][EXCEPTION] [DEBUG] [java.ext.dirs]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u03/ORIDEMO/LIVE_APPL/livecomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[090213_045936426][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[090213_045936426][][EXCEPTION] [DEBUG] [file.separator]:[/]
[090213_045936426][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[090213_045936426][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[090213_045936426][][EXCEPTION] [DEBUG] [APPLOUT]:[out/ORIDEMO_demo]
[090213_045936427][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[9/2/13 4:59:40 PM] [UNEXPECTED] [2984174:RT21672063] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 4:59:40 PM] [2984174:RT21672063] Completed post-processing actions for request 21672063.
[9/2/13 5:10:51 PM] [OPPServiceThread1] Post-processing request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Executing post-processing actions for request 21672114.
[9/2/13 5:10:51 PM] [2984174:RT21672114] Starting XML Publisher post-processing action.
[9/2/13 5:10:51 PM] [2984174:RT21672114]
Template code: PURCHASE_REGISTER_ITEMWISE
Template app: CONA
Language:      en
Territory:     00
Output type:   PDF
[9/2/13 5:10:51 PM] [UNEXPECTED] [2984174:RT21672114] java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
        at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
        at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
        at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
        at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
        at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
        at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
        at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
        at sun.io.Converters.getConverterClass(Converters.java:215)
        at sun.io.Converters.newConverter(Converters.java:248)
        at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
        at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
        at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
        at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
        at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
        at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
        at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
        at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
        ... 17 more
[9/2/13 5:10:51 PM] [2984174:RT21672114] Completed post-processing actions for request 21672114.
thaks
pritesh

hi experts
thanks for ur replay,
this issue is occured with only the particular request and this is custom report. i try some step
down the manager run the cmclean.sql, increease the processes of output postprocessor but not get the any type of effect on issue...
and also follow the step that describe in the below doc:
Output Post Processor (OPP) Log Contains Error "oracle.xdo.parser.v2.XMLParseException: Unexpected EOF" (Doc ID 1273272.1)
To Bottom
request log file details below:
+---------------------------------------------------------------------------+
CONA Custom: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PURCHASE_REGISTER_ITEMWISE module: Ori - Purchase Register - Item wise (15x12)
+---------------------------------------------------------------------------+
Current system time is 02-SEP-2013 17:10:29
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_SEGM='02'
P_CHART_OF_ACCOUNTS_ID='50268'
p_from_date='2012/04/01 00:00:00'
p_to_date='2012/04/05 00:00:00'
P_YES_NO='No'
XML_REPORTS_XENVIRONMENT is :
/u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /u03/ORIDEMO/LIVE_APPL/liveora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
_AMERICA.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Sep 2 17:10:29 2013
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 21672114 on node DEMO at 02-SEP-2013 17:10:51.
Post-processing of request 21672114 failed at 02-SEP-2013 17:10:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
+------------- 2) PRINT   -------------+
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 02-SEP-2013 17:10:52
+---------------------------------------------------------------------------+
i check the document that u all suggest above after that i update u as soon as possible..
thanks & regards
pritesh ranjan

One or more post-processing actions failed - XML Publisher report

Hi all, I'm working with the following envinronment:
Unix platform: HP-UX rp1 B.11.11 U 9000/800
DB: Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
eBS: EBS 11.5.9
More in detail I have a problem when I run a request to see an XML Publisher Report. The request's status at the end is WARNING.....
When I click on "View Output" I don't see nothing and inside the "View Log" I have this error:
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1897375 on node RP1DEV at 10-SEP-2008 14:13:36.
Post-processing of request 1897375 failed at 10-SEP-2008 14:13:37 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Following the Metalink Note 364547.1 I opened the OPP service log and this is the content:
[9/10/08 2:51:09 PM] [OPPServiceThread0] Post-processing request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Executing post-processing actions for request 1897433.
[9/10/08 2:51:09 PM] [72379:RT1897433] Starting XML Publisher post-processing action.
[9/10/08 2:51:09 PM] [72379:RT1897433]
Template code: XX_MANAGERS
Template app: AR
Language: en
Territory: GR
Output type: PDF
[9/10/08 2:51:09 PM] [UNEXPECTED] [72379:RT1897433] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:187)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.io.UnsupportedEncodingException: &Encoding
at sun.io.Converters.getConverterClass(Converters.java:223)
at sun.io.Converters.newConverter(Converters.java:263)
at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
... 17 more
[9/10/08 2:51:09 PM] [72379:RT1897433] Completed post-processing actions for request 1897433.
Anybody have any idea where the error is ?
Any help will be appreciated
Alex

You are right !!
The problem is inside the report generated by Oracle Reports
The XML code, which I retrieve running the report request is the following:
<?xml version="1.0" encoding="&Encoding"?>
- 
- <MODULE1>
- <LIST_G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1000</MANAGER_NO>
<MANAGER_NAME>Anil Passi</MANAGER_NAME>
</G_MANAGER_NO>
- <G_MANAGER_NO>
<MANAGER_NO>1001</MANAGER_NO>
<MANAGER_NAME>Martin</MANAGER_NAME>
</G_MANAGER_NO>
</LIST_G_MANAGER_NO>
</MODULE1>
and the problem is the "&" !!!
So, inside Oracle Reports, when I try to generate the XML code from a preexisting report, the encoding variable is not set.
Now, I'm trying to understand how to set it, but I didn't find nothing....
Somebody knows where can I find a Report's configuration file in order to set this "encoding" ?
Thanks
Alex

Fpga compilation xilinx error 'Process "Map" failed' - 'unroutable situation'

When I try to compile a Labview fpga project on our new system, it fails with the following error summary (the full Xilinx log is attached):
LabVIEW FPGA: The compilation failed due to a xilinx error.
Details:
ERROR:LIT:536 - IBUF symbol "aUserGpio<1>_IBUF" (output
signal=aUserGpio<1>_IBUF) has the attribute IOBDELAY set to value NONE and it
is driving an IODELAY. If the IOBDELAY attribute is on the driving PAD, it
has precedence over the IBUF one. Either the constraint or the design need
modification to prevent an unroutable situation.
Errors found during logical drc.
Design Summary
Number of errors : 1
Number of warnings : 349
Process "Map" failed
Start Time: 10:31:49 AM
End Time: 10:55:32 AM
Total Time: 00:23:43
Hardware:
NI PXIe-1071 Chassis
NI PXIe-8108 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
Installed software:
Labview 2011 version 11.0
Labview FPGA module 11.0.0
FPGA compilation tools (Xilinx12_4)
NI FlexRIO Adapter Module Support 2.2.0
NI-RIO 4.0 (FlexRIO 2.1.0)
Xilinx DRAM compilation bug fix patch from NI article id 5E4FNCDP
Xilinx clock bug fix patch from NI article id 5GFAB7DP
replaces c:\NIFPGA\programs\Xilinx11_5\ISE\xilinx\lib\nt\libPlXil_Clocks.dll; The installed version is c:\NIFPGA\programs\Xilinx12_4-> Manually copied the dll to the installed version
The Project uses the 5761 low speed clip and a DRAM FIFO.
I tried to compile it before installing any patch, after installing the DRAM patch, and after installing both patches and always got a Xilinx error after ~10 minutes compile time. The error summary shown above and the attached Xilinx log are from compiling with both patches installed.
It compiled correctly on our older system:
Hardware:
NI PXIe-1082 Chassis
NI PXIe-8133 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
Installed software:
Labview2011version10.0.0
LabviewFPGAmodule10.0.0
FPGAcompilationtools (Xilinx11_5)
NIFlexRIOAdapterModuleSupport2.1.0
NI-RIO3.5.1 (FlexRIO1.5.0)
XilinxDRAMcompilationbugfixpatchfromNIarticleid5E4FNCDP
Any help / suggestions greatly appreciated,
Fabrizio
Attachments:
XilinxLog.txt ‏1482 KB

Hi Torpedotown,
Can you tell me what version of FlexRIO Adapter Module Support you are using?
The 5761 Low Speed CLIP has a constraint that doesn't work properly with some versions of the compilation tools. In order to solve this you should be able to upgrade to our latest version of FAM support, or go change the constraint manually.
For the latest version of FAM support, go to http://ni.com/info and enter code "famsoftware"
If you've modified constraint files before and feel comfortable doing it yourself, let me know and I can provide you with the details on how to do that.
Thanks!
National Instruments
FlexRIO & R-Series Product Support Engineer

Attempt to process file failed with Exception in XML Parser-format problem

Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karun

Hi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

Process Message failed: System.ArgumentOutOfRangeException: Index and length must refer to a location within the string.

Hi
I am trying to process an X12 message and I am getting following error.
Method : ProcessMessage
Message : Process Message failed: System.ArgumentOutOfRangeException: Index and length must refer to a location within the string.
Parameter name: length
   at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
   at Q.Inbound.X12Preprocessor.getTranTypeFromFuncCode()
   at Q.Inbound.X12Preprocessor.setProcessType()
   at Q.Inbound.X12Preprocessor.getFuncGroupHeader(StreamReader sr)
   at Q.Inbound.X12Preprocessor.ProcessMessage(X12Definition& docInfo)
Please help.
Thanks

Might try them over here.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral%2Cvbgeneral%2Cvcgeneral&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Post-processing request failed one or more post processing action failed .

Beginning post-processing of request 3064071 on node SURYA at 03-NOV-2008 17:07:20.
Post-processing of request 3064071 failed at 03-NOV-2008 17:07:21 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
oppserver log file:
11/4/08 9:17:55 PM] [main] Starting GSF service with concurrent process id = 1100320.
[11/4/08 9:17:55 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[11/4/08 9:17:57 PM] [Thread-21] Service thread starting up.
[11/4/08 9:17:57 PM] [Thread-22] Service thread starting up.
[11/4/08 9:22:48 PM] [OPPServiceThread0] Post-processing request 3066109.
[11/4/08 9:22:48 PM] [1100320:RT3066109] Executing post-processing actions for request 3066109.
[11/4/08 9:22:49 PM] [1100320:RT3066109] Starting XML Publisher post-processing action.
[11/4/08 9:22:49 PM] [1100320:RT3066109]
Template code: XXINA_VIOLET_SUPP_EXE
Template app: SQLAP
Language: en
Territory: US
Output type: PDF
[110408_092250799][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[110408_092250800][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[110408_092250800][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[110408_092250801][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[60]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[UTF8]
[110408_092250801][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[110408_092250801][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[110408_092250801][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[110408_092250801][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=surya.inatech.com)(PORT=1531)))(CONNECT_DATA=(SID=TRAIN)))]
[110408_092250801][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[110408_092250802][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[110408_092250802][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[true]
[110408_092250802][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[110408_092250802][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[1]
[110408_092250808][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[110408_092250808][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[110408_092250808][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[110408_092250809][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[110408_092250809][][EXCEPTION] [DEBUG] [APPLTMP]:[u02/oracle/traincomn/temp]
[110408_092250809][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[110408_092250809][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386]
[110408_092250809][][EXCEPTION] [DEBUG] [java.vm.version]:[1.4.2_04-b05]
[110408_092250809][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[110408_092250811][][EXCEPTION] [DEBUG] [dbcfile]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250811][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[110408_092250811][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[110408_092250812][][EXCEPTION] [DEBUG] [path.separator]:[:]
[110408_092250812][][EXCEPTION] [DEBUG] [APPLCSF]:[u02/oracle/traincomn/admin]
[110408_092250812][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Client VM]
[110408_092250812][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[110408_092250812][][EXCEPTION] [DEBUG] [user.country]:[US]
[110408_092250812][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[110408_092250812][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[110408_092250813][][EXCEPTION] [DEBUG] [user.dir]:[u02/oracle/traincomn/admin/log/TRAIN_surya]
[110408_092250813][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.4.2_04-b05]
[110408_092250813][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[110408_092250813][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/endorsed]
[110408_092250813][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[110408_092250813][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250813][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[tmp]
[110408_092250813][][EXCEPTION] [DEBUG] [line.separator]:[
[110408_092250813][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[110408_092250813][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[110408_092250813][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[110408_092250813][][EXCEPTION] [DEBUG] [cpid]:[1100320]
[110408_092250814][][EXCEPTION] [DEBUG] [sun.java2d.fontpath]:[]
[110408_092250814][][EXCEPTION] [DEBUG] [java.library.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386/client:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i386:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/../lib/i386:/u02/oracle/trainora/iAS/lib:/u02/oracle/trainora/8.0.6/network/jre11/lib/i686/native_threads:/u02/oracle/trainora/8.0.6/network/jre11/lib/linux/native_threads:/u01/oracle/trainappl/cz/11.5.0/bin:/u02/oracle/trainora/8.0.6/lib:/usr/X11R6/lib:/usr/openwin/lib]
[110408_092250814][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[110408_092250814][][EXCEPTION] [DEBUG] [java.class.version]:[48.0]
[110408_092250814][][EXCEPTION] [DEBUG] [java.util.prefs.PreferencesFactory]:[java.util.prefs.FileSystemPreferencesFactory]
[110408_092250815][][EXCEPTION] [DEBUG] [os.version]:[2.6.9-34.EL]
[110408_092250815][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[110408_092250815][][EXCEPTION] [DEBUG] [user.home]:[home/oracle]
[110408_092250815][][EXCEPTION] [DEBUG] [user.timezone]:[Asia/Calcutta]
[110408_092250815][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[110408_092250815][][EXCEPTION] [DEBUG] [file.encoding]:[ANSI_X3.4-1968]
[110408_092250815][][EXCEPTION] [DEBUG] [java.specification.version]:[1.4]
[110408_092250815][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[110408_092250815][][EXCEPTION] [DEBUG] [java.class.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/oracle/traincomn/java/appsborg2.zip:/u02/oracle/traincomn/java/apps.zip:/u02/oracle/trainora/8.0.6/forms60/java:/u02/oracle/traincomn/java]
[110408_092250815][][EXCEPTION] [DEBUG] [user.name]:[oracle]
[110408_092250815][][EXCEPTION] [DEBUG] [DBCFILE]:[u01/oracle/trainappl/fnd/11.5.0/secure/TRAIN_surya/train.dbc]
[110408_092250816][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[110408_092250816][][EXCEPTION] [DEBUG] [java.home]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre]
[110408_092250816][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[110408_092250816][][EXCEPTION] [DEBUG] [user.language]:[en]
[110408_092250816][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[110408_092250816][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[110408_092250816][][EXCEPTION] [DEBUG] [logfile]:[u02/oracle/traincomn/admin/log/TRAIN_surya/FNDOPP1100320.txt]
[110408_092250816][][EXCEPTION] [DEBUG] [java.version]:[1.4.2_04]
[110408_092250816][][EXCEPTION] [DEBUG] [java.ext.dirs]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/ext]
[110408_092250816][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/i18n.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/sunrsasign.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jsse.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/jce.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/u02/oracle/traincomn/util/java/1.4/j2sdk1.4.2_04/jre/classes]
[110408_092250817][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[110408_092250817][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[110408_092250817][][EXCEPTION] [DEBUG] [file.separator]:[]
[110408_092250817][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[110408_092250817][][EXCEPTION] [DEBUG] [APPLOUT]:[out/TRAIN_surya]
[110408_092250817][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[11/4/08 9:23:00 PM] [UNEXPECTED] [1100320:RT3066109] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.UnsupportedEncodingException: &Encoding
     at sun.io.Converters.getConverterClass(Converters.java:215)
     at sun.io.Converters.newConverter(Converters.java:248)
     at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
     at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
     at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
     at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
     at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
     at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
     ... 17 more
[11/4/08 9:23:00 PM] [1100320:RT3066109] Completed post-processing actions for request 3066109.
[11/5/08 11:00:13 AM] [OPPServiceThread0] Post-processing request 3067075.
[11/5/08 11:00:15 AM] [1100320:RT3067075] Executing post-processing actions for request 3067075.
[11/5/08 11:00:15 AM] [1100320:RT3067075] Starting XML Publisher post-processing action.
[11/5/08 11:00:15 AM] [1100320:RT3067075]
Template code: XXINA_XML_TEST_TEMPLATE
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 11:00:58 AM] [UNEXPECTED] [1100320:RT3067075] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.UnsupportedEncodingException: &Encoding
     at sun.io.Converters.getConverterClass(Converters.java:215)
     at sun.io.Converters.newConverter(Converters.java:248)
     at sun.io.ByteToCharConverter.getConverter(ByteToCharConverter.java:64)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:223)
     at sun.nio.cs.StreamDecoder$ConverterSD.<init>(StreamDecoder.java:209)
     at sun.nio.cs.StreamDecoder.forInputStreamReader(StreamDecoder.java:76)
     at java.io.InputStreamReader.<init>(InputStreamReader.java:83)
     at oracle.xdo.parser.v2.XMLReader.setEncoding(XMLReader.java:848)
     at oracle.xdo.parser.v2.XMLReader.checkXMLDecl(XMLReader.java:2718)
     at oracle.xdo.parser.v2.XMLReader.pushXMLReader(XMLReader.java:471)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:263)
     ... 17 more
[11/5/08 11:01:00 AM] [1100320:RT3067075] Completed post-processing actions for request 3067075.
[11/5/08 12:20:30 PM] [OPPServiceThread1] Post-processing request 3067153.
[11/5/08 12:20:30 PM] [1100320:RT3067153] Executing post-processing actions for request 3067153.
[11/5/08 12:20:30 PM] [1100320:RT3067153] Starting XML Publisher post-processing action.
[11/5/08 12:20:30 PM] [1100320:RT3067153]
Template code: XXINA_XML_TRANS
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 12:20:37 PM] [UNEXPECTED] [1100320:RT3067153] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
Caused by: java.io.FileNotFoundException: /D:\Inahome\Raja Ramesh\Official\XML Publisher -Internal Project\SD - XML Publisher\31-oct\subtemp.rtf (No such file or directory)
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 17 more
[11/5/08 12:20:38 PM] [1100320:RT3067153] Completed post-processing actions for request 3067153.
[11/5/08 5:32:38 PM] [OPPServiceThread0] Post-processing request 3067574.
[11/5/08 5:32:39 PM] [1100320:RT3067574] Executing post-processing actions for request 3067574.
[11/5/08 5:32:39 PM] [1100320:RT3067574] Starting XML Publisher post-processing action.
[11/5/08 5:32:39 PM] [1100320:RT3067574]
Template code: XXINA_XML_TEST
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 5:33:11 PM] [1100320:RT3067574] XML Publisher post-processing action complete.
[11/5/08 5:33:11 PM] [1100320:RT3067574] Completed post-processing actions for request 3067574.
[11/5/08 5:36:51 PM] [OPPServiceThread1] Post-processing request 3067581.
[11/5/08 5:36:51 PM] [1100320:RT3067581] Executing post-processing actions for request 3067581.
[11/5/08 5:36:51 PM] [1100320:RT3067581] Starting XML Publisher post-processing action.
[11/5/08 5:36:51 PM] [1100320:RT3067581]
Template code: XXINA_XML_TEST
Template app: PO
Language: en
Territory: US
Output type: PDF
[11/5/08 5:36:56 PM] [1100320:RT3067581] XML Publisher post-processing action complete.
[11/5/08 5:36:56 PM] [1100320:RT3067581] Completed post-processing actions for request 3067581.
getting this error in OPP server log file
any solutions ?
regards,
Arul.

Caused by: java.io.FileNotFoundException: /D:\Inahome\Raja Ramesh\Official\XML Publisher -Internal Project\SD - XML Publisher\31-oct\subtemp.rtf (No such file or directory)Did you verify this?

Post-processing actions failed (Report Completed with Warning Status)

Hi Friends,
I'm developing custom PO Report using XMLP 5.0.0. Preview Of Template is coming properly while running the report , it completed with Warning Status.The Report is not working in UAT while it was passed DEV and TEST Env successfully. Please look at the below log details and help me
------------- 1) PUBLISH -------------
Beginning post-processing of request 654357 on node GOLDBQ at 20-JUN-2007 08:07:22.
Post-processing of request 654357 failed at 20-JUN-2007 08:07:32 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
OPP Log Details
[6/20/07 10:22:04 AM] [OPPServiceThread1] Post-processing request 654539.
[6/20/07 10:22:05 AM] [3039:RT654539] Executing post-processing actions for request 654539.
[6/20/07 10:22:06 AM] [3039:RT654539] Starting XML Publisher post-processing action.
[6/20/07 10:22:06 AM] [3039:RT654539]
Template code: XXTCPOXPRPOPG
Template app: XXTC
Language: en
Territory: GB
Output type: PDF
[6/20/07 10:22:07 AM] [UNEXPECTED] [3039:RT654539] java.sql.SQLException: Non supported SQL92 token at position: 1:
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java(Compiled Code))
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java(Inlined Compiled Code))
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleSql.handleToken(OracleSql.java(Compiled Code))
     at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java(Compiled Code))
     at oracle.jdbc.driver.OracleSql.parse(OracleSql.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleConnection.nativeSQL(OracleConnection.java(Compiled Code))
     at oracle.jdbc.driver.OracleStatement.expandSqlEscapes(OracleStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleStatement.parseSqlKind(OracleStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OraclePreparedStatement.<init>(OraclePreparedStatement.java(Compiled Code))
     at oracle.jdbc.driver.OracleCallableStatement.<init>(OracleCallableStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleCallableStatement.<init>(OracleCallableStatement.java(Inlined Compiled Code))
     at oracle.jdbc.driver.OracleConnection.privatePrepareCall(OracleConnection.java(Compiled Code))
     at oracle.jdbc.driver.OracleConnection.prepareCall(OracleConnection.java(Compiled Code))
     at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:168)
     at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:127)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:208)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
[6/20/07 10:22:07 AM] [3039:RT654539] Completed post-processing actions for request 654539.
END Of OPP Log Details
Regards,
Aanta
Message was edited by:
user526601

HI ,
i am also facing the same problem but i have one solution for this .... that opp err
comes in 3 cases ....
data output will be very large
unable to insert data in template---->template design is wrong.....(in caseif xml is generated for that).
the third case is that the data defination file is perfectly fine but when it have to insert data in template its not getting the path where the template is put.
its all due to xml environment settings.
Tell your DBA to verify the issue...send him the log and opp log.
I expect that you will get what exactly the issues is.
regards
Ratnesh

Sending mail to GROUP ID when a process chain fails.

Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.

hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks

Multi-lingual Error: The translation failed because the online translation service was unavailable

Hi,
We need to implement multi-lingual functionality in SharePoint 2013 on premise server. We have implemented the functionality by referring the below URL.
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/08/12/sharepoint-2013-variations-creating-site-and-variation-labels.aspx
But after this once we translate any page/document, we are getting below error.
Error: The
translation failed because the online translation service was unavailable. Please resubmit this file for translation. If the files fails again with this error message, contact system administrator.
Machine
We have configured the internet over SharePoint server, also referred below url, but
no success.
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
http://technet.microsoft.com/en-us/library/jj729796(v=office.15).aspx
https://social.msdn.microsoft.com/Forums/office/en-US/dcd0e1d3-2b26-41fa-ad07-77fe234fbc23/machine-translation-service?forum=sharepointdevelopment
If you have faced a similar issue and has any information on how to resolve this issue or how to achieve multi-lingual functionality or configure machine translation service in SharePoint 2013,
it will be great help.
Regards,
Shailendra Gupta

Hi Shailendra
Please check this below
http://blogs.msdn.com/b/weslbo/archive/2012/11/07/sharepoint-2013-machine-translations-the-translation-failed-because-the-online-translation-service-was-unavailable.aspx
https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7bf9604-d652-4566-aac5-6bcb10dd6ce5/failed-because-there-was-no-translation-available-online-translation-service?forum=sharepointgeneral
Please remember to click 'Mark as Answer' on the answer if it helps you

Rollup process is failing every day

Hi,
Bi statistics data is loading to info cube and this cube have Adjust process in process chain.
Adjust process is failing daily and giving following 18 messages and showing 16th point as error.
And one more thing is, even though Adjust process is failu2026.at cube level compression of aggregates and rollup of cube and aggregates is happening daily but in process chain this adjust process is failing daily.
     1. Roll up aggregates of Info Cube 0TCT_C01
     2. Rollup is running: Data target 0TCT_C01, from 0000603080 to 0000603371
     3. Editing of aggregate 100533 in main process
     4. Aggregate 100533(0TCT_C01) is rolled up to 603371
     5. Aggregate 100533 (0TCT_C01) rolled up in 4 seconds
     6. 1 aggregates are condensed
     7. Editing of aggregate 100533 in main process
     8. Aggregate 100533 is condensed to 0REQUID <= 603371 and 0CNSID <= 0
     9. Aggregation of Info Cube 100533 to request 603371
     10. Statistic data written
     11. Requirements check compelted: ok
     12. enqueue set: 100533
     13. compond index checked on table: /BIC/E100533
     14. Request statistics calculated for p-dimid 1864
     15. enqueue released: 100533
     16. *******SQL0802N Arithmetic overflow or other arithmetic exception occurred. SQLSTATE=22003 row=1***error
     17. Rollup was successful: Data target 0TCT_C01, from 0000603080 to 0000603371
     18. Rollup is finished: Data target 0TCT_C01, from 0000603080 to 0000603371
Can anybody please tell what is happening here and how we can avoid this perminently.ASAP?
Thanks and Regards,
Venkat

one of the key figure has type INT4. the figure to be uploaded into this key figure is bigger than the upper limit of the INT4 defenition. hence the overflow error
check note 992805
M.

Attempt to process file failed with java.lang.StringIndexOutOfBoundsExcep..

Hello All,
I am implementing file2file with file going from shared folder to FTPS server.
I am using TLS and X.509 certificate in file receiver communication channel.
when I implemented my scenario, this is the error its throwing :
Success : Connect to FTP server "my ftp address", directory "/TEST/"
Error : Attempt to process file failed with java.lang.StringIndexOutOfBoundsException: String index out of range: 3
I know this error is caused when java expects the 3 character length string and if its getting more than that... Does any faced this kindaa problem before...Any help is greatly appreciated....Obviously even points....
Thanks,
Ravi

There is no custom code at all? No mappings, no custom modules, no pre/post processing commands?
Also, check if you get this error when sending to ftps server without certificate (or with another certificate). It may be an incompatibility issue with certificate.
Did you import the .pfx (or .p12) file in KeyStorage Service?
Regards,
Henrique.

Attempt to process file failed with ClassCastException

Hi
I have checked in <b>http://host:por/MessageSystem</b> there i got the following error...
<b>Attempt to process file failed with ClassCastException</b>
Can any one please tell me how to resolve the problem
Best Regards
Ravi Shankar B

Ravi,
I dont think it is feasible. Eventhough you have two files with the same name do you have the data same? Practically it should not be. Let us know your complete requiremens. Also see this link for some help on file validations:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fxi%2fxi-design_configuration%2ffileValidationsinSAPXI-ACaseStudy.pdf
---Satish

LVFPGA - Process "Translate​" failed

Similar Messages

Maybe you are looking for

LVFPGA - Process "Translate" failed