Lwapp units not getting ip number

We have Lwapp and IOS AP and the lwapp units are not getting ip numbers from our clean access yet the IOS ones are. any one seen this before?

Is DHCP enabled on the controller or externally.
If DHCP server is used verify whetehr the WLC and DHCP server are in same subnet

Similar Messages

  • TT12039: Could not get port number of TimesTen replication agent on remote

    i use the "ttRepAdmin -duplicate -from yymhcc_active -host mt2 -setMasterRepStart -uid musicclub -pwd musicclub -remoteDaemonPort 17001 -keepCG -cacheUid musicclub -cachePwd musicclub -localhost "mt4" yymhcc_standby;"
    TT12039: Could not get port number of TimesTen replication agent on remote host. Either the replication agent was not started, or it was just started and has not communicated its port number to the TimesTen daemon
    at the mt4 machine :
    ping mt2
    PING mt2 (10.25.71.26) 56(84) bytes of data.
    64 bytes from mt2 (10.25.71.26): icmp_seq=1 ttl=64 time=0.138 ms
    64 bytes from mt2 (10.25.71.26): icmp_seq=2 ttl=64 time=0.108 ms
    at mt2
    ttAdmin -query yymhcc_active
    RAM Residence Policy : manual
    Manually Loaded In RAM : True
    Replication Agent Policy : manual
    Replication Manually Started : True
    Cache Agent Policy : manual
    Cache Agent Manually Started : True
    and
    repschemes;
    Replication Scheme Active Standby:
    Master Store: YYMHCC on MT2
    Master Store: YYMHCC_STD on MT4
    Excluded Tables:
    None
    Excluded Cache Groups:
    None
    Excluded sequences:
    None
    Store: YYMHCC on MT2
    Port: 21000
    Log Fail Threshold: (none)
    Retry Timeout: 30 seconds
    Compress Traffic: Disabled
    Store: YYMHCC_STD on MT4
    Port: 20000
    Log Fail Threshold: (none)
    Retry Timeout: 30 seconds
    Compress Traffic: Disabled
    1 replication scheme found.

    when i use: ttRepAdmin -duplicate -from yymhcc -host mt2 -setMasterRepStart -uid musicclub -pwd musicclub -remoteDaemonPort 17001 -keepCG -cacheUid musicclub -cachePwd musicclub -localhost "mt4" yymhcc_standby
    TT8179: Cannot create duplicate store : store already exists
    master odbc config :
    [yymhcc_active]
    Description=For Active Master
    Driver=/usr/local/timesten/TimesTen/tt70/lib/libtten.so
    DataStore=/usr/local/timesten/TimesTen/yymhcc/yymhcc
    DatabaseCharacterSet=ZHS16GBK
    ConnectionCharacterSet=ZHS16GBK
    Authenticate=1
    OracleID=yymhcc
    OraclePWD=mc
    UID=mc
    PWD=mc
    #ipcs memory size(M)
    PermSize=8192
    Connections=2047
    #permsize*20%
    TempSize=1024
    PassThrough=1
    WaitForConnect=0
    Isolation=0
    Logging=1
    DurableCommits=0
    CkptFrequency=600
    CkptLogVolume=256
    #LogBuffSize=256000
    LogBuffSize=524288
    LogFileSize=256
    LogFlushMethod=1
    LogPurge=1
    LockLevel=0
    LockWait=5
    SQLQueryTimeout=5
    RecoveryThreads=16
    subscriber config :
    [yymhcc_standby]
    Driver=/usr/local/timesten/TimesTen/tt70/lib/libtten.so
    #DataStore=/usr/local/timesten/TimesTen/yymhcc_std/yymhstd
    DatabaseCharacterSet=ZHS16GBK
    ConnectionCharacterSet=ZHS16GBK
    Authenticate=1
    OracleID=yymhcc
    OraclePWD=mc
    UID=mc
    PWD=mc
    PermSize=8192
    Connections=2047
    #permsize*20%
    TempSize=1024
    PassThrough=1
    WaitForConnect=0
    Isolation=0
    Logging=1
    DurableCommits=0
    CkptFrequency=600
    CkptLogVolume=256
    #LogBuffSize=256000
    LogBuffSize=524288
    LogFileSize=256
    LogFlushMethod=1

  • I purchased Adobe Photoshop Elements 12. Logged in and can not get serial number. Says it is incorrect. Going in circles.

    Can't get serial number for Photoshop Elements. I'm logged in. I have a redemption code and also codes on the back of the box. nothing works and am running in circles. I want to install and use it and can't because I can't get the correct serial number. On the front of the box it says use the card (with redemptiom code to receive the serial number.HELP!!!

    Dear Brian,
    I activated my product in August of 2014.  I had it a few months, October, when my computer crashed.  Therefore I had to go back to Adobe tell them what happened, and then until December I had noticed that it said that I had a trial copy.  I was not worried, as I had the serial number.  it was working, but in January I got a message that my "trial" copy had expired. 
    At that time I had contacted Adobe and was told that because it was beyond the 3 months, they would no longer help me.
    Therefore, at one point, when the computer crashed, I had not deactivated the program.  But Adobe had gotten it working for me again. 
    I do not know what happened between October and December to have changed the software from a real copy to a trial copy.
    Now to your patient questions.
    As you wrote, that is what happens to the point of getting the trial copy, but when I follow the process through, I get a message that my "trial copy has expired".    When I go the the editor, the whole process loops again, sign in, trial copy, licence page, add serial number, then the message that the trial has expired.
    When I got that message the first few times months ago, I went back to the Adobe web site and downloaded another copy.  (I have done this numerous times)  It still said that I had a trial copy and that it had expired, there is a box to licence this software, when I click that, I have to sign in again, This time I also had gone to the Adobe web site signed in and left it open, while I put in the serial number, hoping that would help (have also tried that before).  It waits and then the Editor/Organized box comes up again.  When I go to the Editor, it tells me that this is a trial copy which has expired and it starts all over again.
    I was so frustrated, that I waited a couple of months to try it again.   The thinking was that there was some glitch that would work it self out and I could again  down load a clean copy of the original, not a trial.  (I do not know how I keep getting a trial copy of PSE 12, as it is not even offered on the site.)
    The crazy thing is this morning when I turned on my computer, I had an update for the Adobe PSE 12 and Camera Raw.  Probably because I had downloaded a copy again. 
    When I go the the web site to down load a copy of the PSE !2, I am doing it from the My accounts/ products page and downloads.  I have left the web page open to copy the serial number from that page, although it always matches my notes. 
    ThanksT

  • Organisation unit not getting determined

    Hi All,
    I have configured 4 transaction. Same partner determination profile, text deter procedure, org. data profile and date profile is assigned to all of them. But in only 2 of them organisational unit, sale office and sales group is not getting determined.
    What could be the reason for this?
    Regards,
    Nikhil

    Hi Nikhil,
    I think buffering CRM sales areas might help you.
    In CRM the sales areas are represented in the organizational model, this means they are not physically stored, but they are the result of the different combinations of sales organizations, sales offices, sales groups, channels and divisions maintained in the organizational model.
    Whenever a CRM transaction or a business partner needs the sales areas, they are calculated, and this is an expensive process. To speed up this process, the sales areas are buffered.
    Report HRBCI_ATTRIBUTES_BUFFER_UPDATE is used to buffer the attributes of organizational management objects. To enable buffering you have to maintain view T77OMATTR.
    1. Go to Tcode : OOATTRCUST
    2. Select the structure node Scenarios.
    3. Flag the field in the column Buffering for the scenario SALE.
    4. Choose Save (Ctrl+S).
    Then run the report in Tcode: sa38
    1. Tcode: sa38
    2. Select the report HRBCI_ATTRIBUTES_BUFFER_UPDATE.
    3. Flag the fields Delete All Buffers and Restructure Buffer on (Date).
    4. Choose Execute (F8).
    In Note 737315 further details regarding this topic are described. Note you can also schedule a job in transaction SM36 to run this report regularly.
    Hope this helps!
    Regards,
    Chethan

  • CS4 : Can not get serial number for student Edition

    I purchased Creative suite 4 Design premium student edition for windows week ago, I followed the instruction, however
    when I pressed the link "get your serial number" under NEXT STEPS , I got the message as below,
    Any advise,
    thanks,
    Bin

    Please repost in the adobe.com forum. Adobe personnel monitor that forum and may be able to help.

  • Can't get my number pad to work - No Num Lock

    Hello,
    I recently got my iMac with the wireless keyboard and noticed that I can not get my number pad to work. There is no num lock button to turn on/off, just the clear button. Can someone help me figure this out? Thanks
    Jay

    This is from the built-in Mac Help.
    Hope it works for you.
    My numeric keypad doesn't work
    The way the numeric keypad works depends on your computer, the keyboard you're using, the application you're working in, and whether the Num Lock key is engaged. Usually, the numeric keypad is used to enter numbers in a document, but in some applications you might be able to use the keypad to navigate (move around in) your document.
    Press the Num Lock key to switch between the ways the numeric keypad functions.
    If you have a separate numeric keypad on your keyboard, the Num Lock key is located in the numeric keypad. If you're using a portable computer, the Num Lock is a function key, marked Num Lock (F6). If your keyboard has a separate keypad but no Num Lock key, try pressing Shift-Clear.
    Most portables have a group of keys on the keyboard that can function as the numeric keypad. To find the keypad, look for small numbers or symbols in the lower-right corner of keys on the right side of your keyboard. Press the Num Lock key (F6) to turn on the keypad. The green light glows on the Num Lock key when the keypad is active.
    S
    iMac 2Ghz Intel Core Duo   Mac OS X (10.4.8)  

  • MIGO user exit to get serial number

    Hi Experrts:-
    I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
    I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
    in exit od badi i will change the status
    I have used following badi:-
    MB_DOCUMENT_BADI
    MB_MIGO_ITEM_BAdI
    Thanks

    Hi ,
    m also using GET_SERNOS_OF_DOCUMENT
    but not getting serial number.
    need to get serial number in MIGO.
    how to pass parameters to this fm.
    KEYDATA-TASER  = 'SER03'  "Goods mvmnt
    KEYDATA-SDAUFNR  = ??
    KEYDATA-POSNR   =   ??
    CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
       EXPORTING
         KEY_DATA                  =
    TABLES
       SERNOS                    =
    EXCEPTIONS
       KEY_PARAMETER_ERROR       = 1
       NO_SUPPORTED_ACCESS       = 2
       NO_DATA_FOUND             = 3
       OTHERS                    = 4
    please guide..

  • To get IDOC number when running MASTER_IDOC_DISTRIBUTE in update task.

    Hi ,
    I am running 'MASTER_IDOC_DISTRIBUTE' Func Module for creating FIDCC2 message type IDOC in UPDATE TASK. I am not getting IDOC number of the created IDOC in this case.
    Can anyone pls update me how do I get it?
    Thanks,
    Prabhu
    Note: Useful answers will be rewarded.........

    I found the resolution....
    Thanks all.

  • MIGO( (good receipt,Transfer pos how to  to get serial number  at run time

    Hi Experrts:-
    I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
    I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
    in exit od badi i will change the status
    I have used  following badi:-
    MB_DOCUMENT_BADI
    MB_MIGO_ITEM_BAdI
    Thanks

    Hi Dilip,
    If I am correct you are taking about changing user Status at device level (serial number)
    you can set the user status through status profile (Tcode OIBS for particular status profile).
    within this, you can also set/ change the status, if particular business transaction is executed (for e.g. good receipt, Stock transfer)
    Please check if you are using status profile in your case, if not create one, by this way i think you can able to map the requirement.
    Regards,
    Chetan

  • MIGO  to get serial number at run time

    Hi Experrts:-
    I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
    I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
    in exit od badi i will change the status
    I have used following badi:-
    MB_DOCUMENT_BADI
    MB_MIGO_ITEM_BAdI
    Thanks

    Depending on your needs, you need to put below code in a different UserExit or BAdI :
    types: begin of ty_s_goserial,         "Cfr. INCLUDE 'LMIGOKE1' for 'trx. MIGO
              selected type xfeld,
              serialno type gernr,
              uii type uii_char72,
              subrk type xfeld,
            end of ty_s_goserial.
    data: lt_goserial type standard table of ty_s_goserial with non-unique default key.
    data: ls_goserial like line of lt_goserial value is initial.
    field-symbols: <fs_goserial> like lt_goserial. "type goserial.
    unassign <fs_goserial>.
    "Get the SERIALNOs via trx.MIGO-itabs ('GOSERIAL')
    assign ('(SAPLMIGO)OREF_DETAIL->T_GOSERIAL') to <fs_goserial>.
    loop at <fs_goserial> into ls_goserial.
    "do your checks or whatever ...
    endloop.
    Check the possible 'enhancement points' via break-point in the "CL_EXITHANDLER"-class, method 'GET_INSTANCE' code-line 28 (SY-SUBRC) when running trx. "MIGO". As you can clearly see, this is only applicable when running trx.'MIGO'.

  • Tables to get customer number

    Hi all,
    I have a requirement to get customer number for documents in bseg and bkpf table records, anyone can tell the related tables for the same ??
    thanks and regards
    Jijo

    The key fields that link an entry in BKPF to corresponding entry in BSEG are Client (MANDT), Company Code (BUKRS), Accounting Document Number (BELNR) and Fiscal Year (GJAHR).  You will have only header info. in BKPF, so you would not get customer number from there.  In BSEG, have you tried field KUNNR for getting customer number?  You will get this record when your selection criteria is BSEG-KOART='D' for a given company code, accounting document number and fiscal year.  In that record, look for the value in field KUNNR, which is the customer number.

  • BP number not getting created while creating org structure in PPOMA_CRM

    Hi,
    we have sol Man 4.0 SP15. I am creating org structure in PPOMA_CRM. After creating the org units, the BP number are NOT getting generated automatically. Please advise on this.
    Regards
    Kumar

    Hi,
    Hav a look at the below post
    [PPOMA_CRM no BP number assigned|PPOMA_CRM no BP number assigned]
    Thx,
    Waseem

  • Service Number is not getting updated in the Purchase Requisition

    Hi All,
    When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction. I am passing all the services related parameters in the FM.
    Please clarify this.
    Thanks for the help.
    Vinoth

    Hi Vinoth,
    Are you getting any error in the return table?Can you show your coding?
    Regards,
    ravi

  • Service Number is not getting updated in the PR called by BAPI

    Hi ,
    When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction.
    I am passing all the services related parameters in the FM.
    Thanks for the help.
    F.F

    Hi Amar,
    need your help. i am facing the same issue.
    how did you resolved it . please let us know.
    Thanks,
    Santosh

  • Check number not getting updated in vendor line items

    Hi
    I am giving check to vendor. Hence i am assigning manual checks in FCH5. Then i did FCHU. After i did FCHU, my check number got updated in assignment field in bank line item. But i am getting problem for vendor line item.
    My vendor line item is not updated with check number. Hence i am unable to see what check number is issued against which payment document. I do not want to go in each every document and then click on environment and check information.
    I tried with check register also, but i am not getting vendor wise bank details smoothly.
    So i want to know how can i get check number in FBL1N vendor-wise. Is there any standard report?

    You should activate the PAYR-CHECF in FBL1N report. Execute FBL1N report for a vendor and go to Menu->Settings-> Special Fields. A new screen would open. There add the table PAYR and field CHECF. Save and exit out. Now the check number should be displayed in FBL1N report.
    Thanks,
    SD.

Maybe you are looking for