LX25 displays wrong data for the entered date range

System says "Inventory not executed" status for the bins even if Inventory is executed for the bins in the date range provided in the selection screen.
For e.g.
I execute report for Warehouse XYZ. I specify date range as 01.04.2014 to 31.03.2015.
I get some bins in the status "No Inventory executed".I presume that Inventory is not executed for these bins within this period.
But when I go to each bin in the status "No Inventory executed" I find that The bins are counted on the dates 24.09.2014 and then on 05.04.2015.
Then I changed the date in the selection screen to 01.04.2014 to 05.04.2015.
Those bins which were earlier in the status of "No inventory status executed" are now not present in this status.
Does this mean that LX25 report is based on the Last counted date? Or the report is not displayed correctly for the date range provided?
I want to know the criteria based on which the LX25 report works.
Thanks In Advance.

Hi Jurgen,
Below information I found from the LX25 report info in SAP.
Inventory status
Description
This report provides information on the stock in the storagae bins and presents this on the screen. You can limit your selection by warehouse number, storage type and storage bin, or choose the following criteria:
Total number of bins
Number of inventoried bins in the selection period
Bins with active inventory
Bins with planned inventory
Bins without executed inventory
From this list, you can obtain a plan of the individual storage bins with further detail information within a storage type, by clicking on the relevant line total.
It clearly shows that the report should be able to show the number of inventoried bins in the selection period, which it doesn't. Does it mean that system is not working as expected?
Regards
Soumya

Similar Messages

Dependent master data for the Transaction data

Hi,
Wish u Happy New Year to All.
I use to schedule daily some 250 master data.Then i will run transaction data.Because of this the system performance is effecting.I want to know, where i can find dependent master data objects for the particular transaction data?
Thanks in Advance
Regards,
Siv

Dear Siva
In the Info Source Over View for the particular data target can shown dependent master data objects.
Regards
Saravanan.ar

LIS - To get the data for the missing data for the infostructure S906

Hi
We have performed an unicode conversion In our SAP ECC 6.0 system, after the conversion, the infostructure S906 (copy of S006) was not updated for the period 22nd June to 25th June 09.
Then we regenerated the infostructure S906 using the tcode MCS/ on 26th June and after which the update rules are working correctly in S906.
Now when we run the SOP report for this week, the data is missing for the period 22nd June to 25th June 09.
We have gone thru the note 64636 - to setup the infostructure from the begining, which needs more downtime.
Is there a possibility to get the missing data for the above period only, instead of setting up the infostructure from the beginning.
Thanks & Regards
Senthil

You did not tell us what kind of update are you using. Some transactions (e.g. OLI1) allow to run it by posting date; others (e.g. OLI9) for a range of the documents. You can find what document numbers were created in the period of question and then run it for them. Although I would recommend the full rebuild.

Quota is displayed twice in 2006 for the same date

When iam entering Leave Quota Through PA30 , PA61 ,PT_QTA00
for a particular Employee it will display the Quota Twice
Is there any way we can stop this ?
is there any way we can Put cap that double Entry for the same date ?
Quota is deducting Normally but it is Displaying Twice
Plz Help Experts

Thank You So much
i changed in the info type
SPRO>> Time Management>> Time Data Recording and Administration>> Specify System Reaction to Overlapping Time Infotypes
Infotype 2006
Time Cstr. Class 01
Reaction Indicator   : select according to The Requirement
Right now Reaction Indicator is set to W
Make the Reaction Indicator to E and save the Entry
It worked for now
one thing iam not sure how does V_T554Y table work
Plz let me know
Reaction I ndicator
This indicator determines how the system reacts when you enter new infotype records which overlap with existing ones.
The specifications are as follows:
A - The old record is delimited, all collisions are displayed.
E - The system does not allow you to create the new record, and
    displays all collisions.
W - You can create the new record, but the old record   remains unchanged. All collisions are displayed.
N - As for W, but collisions are not displayed.
Edited by: jkhose on Jan 25, 2012 1:23 AM

How to reset data for the company code 1000

Hi Gurus,
I am practicing SAP SD on a sandbox server as am learning it.
But i see that the standard data for the company code 1000 has been altered by previous users and most of the standard setttings have been changed.
Due to this am having a lot of issues while configuring a new company code by copying it from 1000.
Please help me reseting the data for the company code 1000 so that it will be easier for customizing and learning.
Regards,
Harish

Hi Harish,
Follow the step given below
SPRO --> Enterprise Structure --> Definition --> Financial Accounting --> Edit, Copy, Delete, Check Company Code
A pop screen will appear which will give you two options
1) Copy, delete, check company code
2) Edit Company Code Data
Select option one
On next screen --> Click at " Check org. object" or press F8 --> It will ask your company code --> enter your company code 1000 --> Enter
It will check all the related table and if it find any discrepency
then it will show you one pop up screen
Errors in
foreign key dependencies
Do you want the error log
displayed now?
Click at Display now --> correct all the fields which are wrongly maintained.
Hope this helps
Regards,
MT

Problem in retreiving data for the given user parameter year!!!

hi all,
I am working in oracle report 6i. I want to display the data for the date given in the parameter field(MM/YYYY).
For ex. Input is 07/2007 means i want to display the data from 04/2006 to 07/2007.Please guide me
to get this desire output......
Here is my query.....
select gl_code,financial_month,financial_year,division_code
from gtemp
where financial_year between to_number(to_char(:P_Date,'YYYY')) - 1 and to_number(to_char(:P_Date,'YYYY'))
and financial_month >= '04'
and financial_month < = to_char(:P_Date,'MM')
and division_code = 11
order by financial_month, financial_year
regards,
jame
Message was edited by:
Jame

Works fine if u gave values instead of variables.... But if we gave 02 in place of 11 like below.Query will get
confused to take which years 02 because in both 2005 and 2006 we have 02(Feb)thats y.......
how to overcome this prob.......I think, my entire query is wrong to get this desire output....Please guide me how
to solve......
select gl_code,financial_month,financial_year,division_code
from gtemp
where financial_year between 2005 and 2006
and financial_month >= '04'
and financial_month < = '02'
and division_code = 11
order by financial_month, financial_year

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

Using the tcode:S_ALR_87013611, no report data for the cost center

Hi,Friends.I need a help.
In the tcode FB60,i entered the following data and then posted the vendor inovice sucessfully.
data:
( Note: G/L acct:55020141 is also a primary cost element)
In the tcode:S_ALR_87013611,I entered the following data and executed.
but the result is:{Report contains no data. Check the selection log}.
data: { Controlling Area: C999, Fiscal Year: 2010, From Period:1, To Period:12,Plan Version:0,
        Or value(s):2001}
(Note: Cost center:2001 belongs to Controlling Area: C999)
please tell me how to do,so that using the tcode:S_ALR_87013611, I can see the report data for
the cost center 2001.
sincerely                      WenYao Ma
Edited by: wenyao ma on Mar 22, 2010 1:09 PM

thank you,friends.
I just solved it.
Solution:
1) Maintain Controlling Area
   path:spro>Controlling>Organization>Maintian Controlling Area>Maintain Controlling Area.   tcode:OKKP
In the {Activate components/control indicators}cost center should be 'component active'
2) Maintain Number Ranges for Controlling Documents
   path:spro>Controlling>Organization-->Maintain Number Ranges for Controlling Documents.   tcode:KANK
Element { COIN CO Through-postings from FI} should be assigned to one group.

Min,Max for a time Range and Sum of Records for the last date/time

Hi All,
I have a table with the following structure/data:
create table Events   (
                                    [EventID]
int                   NOT NULL,
                                    [Title]
nvarchar(200) NOT NULL,
                                  [SourceName] nvarchar(20)   NOT NULL,
                                    [Type]
int                  NOT NULL,
                                    [eDate]
datetime
insert into Events values(100, 'Event 1', 'S01', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S07', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S08', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S09', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S010', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-01-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-01-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-01-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-02-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-02-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-02-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S01', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S02', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S03', 3,'2014-03-01 00:00:00.000')
insert into Events values(100, 'Event 1', 'S04', 3,'2014-03-01 00:00:00.000')
insert into Events values(101, 'Event 2', 'S05', 3,'2014-03-01 00:00:00.000')
insert into Events values(102, 'Event 3', 'S06', 3,'2014-03-01 00:00:00.000')
And I wrote the following query:
select EventID as [Event ID],
       Title,
       count(distinct(SourceName)) as [Instances],
       Type,
       min(eDate) as [First Detected],
       max(eDate) as [Last Detected],
       datediff(d,min(eDate),max(eDate)) as [Delta (days)]
from Events
where type = 3
group by EventID, Title, Type
having max(eDate) <> min(eDate)
   and max(eDate) =(select top 1 eDate from Events order by eDate desc)
and I get the following results (see the instance number)
Event ID Title         Instances Type First Detected                     Last Detected
   Delta (days)
=============================================================================================================================
100         Event 1         5         3    2014-01-01 00:00:00.000     2014-03-01 00:00:00.000
59
101         Event 2
3         3    2014-01-01 00:00:00.000     2014-03-01 00:00:00.000     59
102         Event 3
2         3    2014-01-01 00:00:00.000     2014-03-01 00:00:00.000     59
This is normal for this query however what I need to do is a little different.
In other words, while I need to show when we recorded a specific event first and last time,
I need to display the results for the last date/time when it was recorded.
For example what I need to provide should look like this:
Event ID Title                Instances        Type      First Detected
Last Detected                         Delta (days)
=============================================================================================================================
100         Event 1            2                  3
2014-01-01 00:00:00.000     2014-03-01 00:00:00.000      59
101         Event 2            2                   3
2014-01-01 00:00:00.000     2014-03-01 00:00:00.000      59
102         Event 3
2                   3            2014-01-01 00:00:00.000     2014-03-01 00:00:00.000
59
Could you please help me to fix this query?
TIA,
John

;With cte As
(Select EventID as [Event ID],
Title,
SourceName,
Type,
min(eDate) Over(Partition By EventID, Title, Type) as [First Detected],
max(eDate) Over(Partition By EventID, Title, Type) as [Last Detected],
eDate,
datediff(d,min(eDate) Over(Partition By EventID, Title, Type),max(eDate) Over(Partition By EventID, Title, Type)) as [Delta (days)],
max(eDate) Over() As MaxEDate
from Events
where type = 3)
Select [Event ID],
Title,
COUNT(Distinct SourceName) As Instances,
Type,
[First Detected],
[Last Detected],
[Delta (days)]
From cte
Where eDate = MaxEDate And [First Detected] <> [Last Detected]
Group By [Event ID],
Title,
Type,
[First Detected],
[Last Detected],
[Delta (days)];
Tom
P.S. Thanks for providing the DDL and data. That is always very helpful.

How to get correct opening blance data for the quarterly report in BOFC?

Hi all,
I have a problem with getting the opening balance for the quarterly report.
i would like to keep the beggining balance data for the end of previouse year. (eg: now is 2010, then keep the begginig balance at Dec.2009 for each quarterly reporrt through the year in 2009).
however, for example in the second quarter, if i choose the beggining balance of Dec.2009 in the Consolidation definition, there is a problem that consolidation FS does not include the manual journal entry that ive entered at the first quarter such as goodwill.
Do I need to make manual journal entry at all the quarterly reporting period if I want to set the beggining balance for the previouse year end?
Could somebody please tell me how to remediate to this issue?
Or how do you manage with the opening balance in BOFC?
Thanks & Regards,
Hitomi

Hi Michael,
HRMS appliocation
database 10.2.0.4
windows XP
ebs 11.5.10.2
One of our user using disooverer 4i desktop and administration edition on old windows 2000 machine and connecting to schema.
We are decommision old windows 2000 machine.
I have installed disooverer 4i desktop and administration edition on new windows XP VM box and trying to connect to same schema which was used with old
desktop and asking me to create EUL. What is theat I should be doing to use new one same as old one?
Old box is still there.
Thanks.

JCo connection for the application data

Dear All,
Now, we configure BP for MSS. When we set JCo connection for the application data, from this link http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm we selected the method "Ticket".
When we run the page in "Team" area, we found some errors as follow:
- You do not have the authorization to start service sap.com/pcui_gp~isr/IsrStatusoverview
- You do not have the authorization to start service sap.com/mssreccand/CandidateStatusOverview
- Pages about "Employee Information" display Blank iViews.
But if we set JCo connection for application data by using "User/Password" method (UserID have "SAP_ALL" profile in back-end system), the application work fine.
Kindy advise us which method should be used to set JCo connection (Ticket or User/Password).
If the method should be "User/Password", please advise authorization and user type for UserID that be used to map JCo connection.
Thank you very much,
Anek.

Hi,
Go through the contents in,
http://help.sap.com/saphelp_ep60sp2/helpdata/en/8f/67d27676ace84080964d4c4223bb3c/content.htm
Hope this helps !
Regards
Srinivasan T

BPS You have no authorization for the requested data

We are implementing Hierarchy node based security for our BPS.
When the user tries to display the planning layout, they get the error message "You have no authorization for the requested data "
I have given authorization to the relavant Infocubes, also checked the all the Authorization Relavant Info Objects and added theses Info Object to the custom authorization created in RSECADMIN.
Also added the info objects 0TCAACTVT, 0TCAIPROV, 0TCAVALID to the custom authorization.
In pfcg, this authorization has been added to S_RS_AUTH. I have also given activity 02, 03, 16 values and a * to planning areas, functions, packages, groups, levels, folders, ... to the objects R_AREA
R_BUNDLE
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
But still we get the same error.
Has anyone encountered this problem? Can you please provide me some clues to resolve this issue

Thank you very much Grevaz, but that template does not help.
I did run both ST01 trace and BI RSECADMIN trace. RSECADMIN Trace shows the below authorization failure
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR BETWEEN '4012001000'
AND '4012001999'
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Partially Authorized (Average)   Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
206 ( 0FUNDS_CTR )
Authorization Check Complete
We have created custom authorization and trying to restrict based on hierarchy node.
One point I observed is, when I give access to all nodes with a wildcard * in the custom authorization, then the error disappears and the layout is visble. But our point here is to try to restrict based on the nodes and we cannot give display access to all nodes.

Different Info Packages for the same data source.

Hi Team,
I have a question, which i asked before that but i ended up with different solution.
I want to load 02.2002 to till date into ODS. Data source is 0FI_AR_10.
My boss wants in this way .
1) one infopackage for 02.2002 to 02.2005 with init.
2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
3) one info pack with no selection criteira.
What will be the result ?
My guess is, Once we do init for the time period 02.2002 to 02.2005 ,
the system with note the timepreiod for the Datasource.
When i try to do Init for the second, the system will say init already exits for the data source. And it will not allow me to do init for the second selection.
Correct me if i am wrong.
Regards,
-Sonti-

Your planned InfoPackages:
- 1) one infopackage for 02.2002 to 02.2005 with init.
- 2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
- 3) one info pack with no selection criteira.
As the selection criteria of package 1) & 2) do not overlap, is it possible.
For package 3), you need to do it as delta update instead of initialisation. Package 3) with no selection criteria overlaps with package 1) & 2).
Refer to the Help Documentation, which explains this quite clearly.
Link: [Maintaining InfoPackage - Tab Page: Updating|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
>For selection criteria that do not overlap, several initialization criteria are possible for initializing the delta process when scheduling InfoPackages for data from an SAP system. This gives you the option of loading the relevant data for the delta process, step by step into the Business Information Warehouse. For example, you can load the data into BI for cost center 1000 in the first step, and the data for cost center 2000 in the second step.
>A delta requested after several initializations, contains the super set of all the successful initial selections as a selection condition. This selection condition can then no longer be changed for the delta.
Hope this help.

Looking for a manual for the Historical Data Viewer Lookout 6.1

Is there a manual on the Historical Data Viewer (Measurement and Automation Explorer)?
I have never logged any analog data, but want to log (to historical data) the battery voltage at a remote site during a power outage.
I have the object established and have a display showing the real-time battery voltage. I have selected logging and have set the resolution and the deviation.
I am stuck where it comes to the historical data viewer. I believe that I need to set up a trace to view the data, but can not find a manual for the Historical Data Viewer (Measurement and Automation Explorer) so that I can read up on it.
Does anyone have a link to a manual?
Thanks, Alan

You have to configure the Scale parameter of Pot in Lookout. The Historical Data Viewer just reads data from database the show it. It can't scale it.
But I can't find a way to add a reference line to the view. Maybe this can be a new feature.
Ryan Shi
National Instruments

Reload for the historical data

Hi All,
I have an R/3 extractor '2LIS_04_P_ARBPL' which loads deltas everyday. Some time back on 16-06-09, masterdata(ZRESOURCE) was changed. Since then delta loads have happened & the extractor has fetched proper transaction data for the changed masterdata i.e. for the new resource. But for the prior period to 16-06-09, it still refers to the old resource. But the client wants that the transaction data of the prior period should also refer to the new (Changed) resource.
Pls advice me as to what I should do. Delete the existing data relating to the prior period & reload the historical data? If so how should I go abt it? And any precautions as its a delta load.
Thanks & Regards,
Shreesh.

Hi Shreesh,
We face similar kind of situation too. Example of such master data change is PL/PC reorganization.
In these case if any field are picking value from master data then master data present at the time of loading will be updated in cube and in future if master data change,you will see both old and new values in cube.
Solution for this is :-
1) try to make the client understand by explaining the whole scenario, client may get convinced.
2) Do selective deletion and load again data in cube
3) don't store values for that field in cube instead make the field as navigational attribute in cube, if you do this then value present at the time of execution of report will be displayed in report output.
Regards,
Saurabh

LX25 displays wrong data for the entered date range

Similar Messages

Maybe you are looking for