Lync Hybrid : Unable to write to active directory due to lack of permission

Hello everyone,
I need a little help to troubleshoot a problem I have when moving a user to Lync Online.
My client has a Dirsync and Adfs working perfectly with o365.
My problem is that when I try to move a user to Lync Online I have this error :
Move-CsUser -Identity "Username" -Target sipfed.online.lync.com -credential $cred -hostedmigrationOverrideUrl "https://admin0e.online.lync.com/hostedmigration/hostedmigrationservice.svc"
"Move-CsUser : Unable to write to Active Directory due to lack of permissions"
Like the error said, it's a lack of permission but what kind of permission do I need to make this work ? I've tried to googleit/technetit but no helpful topic found...
Thanks in advance for your help and answers.
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

Hi,
Did you solve the issue by adding the account to RTCUniversalUserAdmins group?
To move an on-premises user to your Lync Online tenant, run the following cmdlets in the Lync Server Management Shell, using the administrator credentials for your Microsoft Office 365 tenant. Replace "[email protected]" with the information for the user
that you want to move.
You can try to move the user from Lync Server on premises to Lync online with the help of the link below “Move users to Lync Online”:
http://technet.microsoft.com/en-us/library/jj204969.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

RW-00000: Unable to write the following directory after aborting rapidwiz

Hello installation Gurus,
I am running rapidwiz as root to install/upgrade ebs to 12.1.1 on oracle Linux 6 and it is failing on the database Node Configuration with
"RW-00000: Unable to write the following directory. Please check permissions." The irony is it doesn't exactly tells me which directory.
My oracle account is orafint and owns /u01/app/oracle and /u01/app/oracle/product/11.1.0/db_1.
I rant through this installation last night and abort at when I realised that it could not continue for lack of an existing inventory as I had yet installed the database rdmbs. I cancelled rapidwiz, installed the rdbms, created a database and rebooted the server. I have tried "rapidwiz -restart" to no avail.
The log file /tmp/11021532 has not errors in it. No file in oraInventory/ has been updated since I started this installation.
I have read a few forums but non was of help.
Thanks
Mathias

Hi Hussein,
thanks, Note [ID 110372.1] solved that problem by renaming /etc/oraInst.loc, some files in/tmp and then restarting the installation.
But I just encountered another problem towards the end of my installation:
RW-50016: Error: - Database ORACLE_HOME environment file was not created:
File = /u01/app/oracle/product/11.1.0/db_1/OFTEST_ofintest.env
RW-50016: Error: - TNSNames SQL*Net file was not created:
File = /u01/app/oracle/product/11.1.0/db_1/network/admin/OFTEST_ofintest/tnsnames.ora
RW-50016: Error: - APPL_TOP environment file was not created:
File = /u02/applfint/apps/apps_st/appl/OFTEST_ofintest.env
RW-50016: Error: - ADOVARS environment file was not created:
File = /u02/applfint/apps/apps_st/appl/admin/adovars.env
RW-50016: Error: - APPSCONFIG was not created:
File = /u02/applfint/apps/apps_st/appl/admin/adconfig.txt
I had precious successfully installed from this same directory about two twice within the past two months for testing so rapid install is up to date.
Thanks
Mathias

Unable to connect to Active directory from obiee 11g

Hi Gurus,
I was trying to integrate Active directory into OBIEE 11g. Followed the Oracle documentation and Rittman Mead too but cannot get past a connection issue. I create a new provider,provide the connection details,use bissytemuser in AD as the Principal but when WLS is bounced/restarted, it fails to connect and throws the below error:
"Cannot initialize identity store, cause: oracle.security.idm.ConfigurationException: javax.naming.CommunicationException: <hostname>:389 [Root exception is java.net.UnknownHostException: <hostname>]".
Not sure if this makes a difference but admin and managed server come up but not analytics.
Please help me out with scenarios to test if my bi server is connecting to AD or not?
Thanks,
Dan

To answer this need more details.
btw: I would suggest to check these
Property Name=virtualize
Value=true
and
Control Flag list to OPTIONAL
you may send me email

IPhoto: Unable to write to library. Check that you have permission to write to the library directory

I have been asked to submit a new thread regarding iPhoto's recent inability to write to library.
The original thread can be found here.
SPECS:
Mac Mini (Mid 2011)
OSX 10.10.2
Seagate 4TB External HDD, formatted to Mac OS External (Journaled) (purchased 8 Feb 2015)
Previously, "Ignore ownership on this volume" was not ticked. Now it has been selected.
Before 30 March, iPhoto Library located on the Seagate external HDD worked fine with no errors. It was previous copied from Carbon Copy Cloner from one of my Samsung internal HDD in my Mac Mini that had a S.M.A.R.T. failure. There were errors with particular thumbnails and files (I assume had corrupted due to the internal HDD failing) but CCC did as directed and copied the entire iPhoto Library to the new Seagate external HDD.
It seems that after installing the latest iPhoto update:
iPhoto version 9.6.1 from the App Store (installed March 30, 2015), iPhoto no longer has "permission" to write to library when opened:
(Could this be a program with the latest software update?)
Upon accessing the Photo Library First Aid control panel (holding Option+Command keys and selecting iPhoto):
And selecting the first option, "Repair Permission,"
I still receive the error message (doesn't even start repairing photo library permissions):
What else should I do? It won't let me "Rebuild Database" either. I have restarted the Mac Mini. I haven't tried disconnecting the external HDD. And I do not have another HDD big enough to transfer the entire iPhoto Library to see if it is my iPhoto Library that has corrupted, or the new Seagate external HDD that has decided not to play nice. Suggestions would be greatly appreciated!

OK. I've been trying to workshop this some more.
AFTER restarting my Mac Mini, I selected "Get Info" on this Seagate external HDD, and low and behold, "everyone" sharing & permissions was reset back to "Read Only." I attempted to move a folder into this external HDD and was as to "Authenticate" the move. So entering my Administrator password, the folder can be moved.
I went into Disk Utility to "Verify Disk" and I now get the green text "This volume appears to be OK."
But I am UNABLE to "Ignore ownership on this volume."
I receive the following error message:
The operation can't be completed. "An unexpected error occurred (error code -8076)."
I am pulling my hair out!

IPhoto won't open and has an error that says "Unable to write to iPhoto Library, check that you have permission to write to the iPhoto directory. Please help.

It will not open my photos as well. I see this question asked in 2010 but I don't have the files it says that are there.

Where are you storing your iPhoto library? In your Pictures folder or on an external drive? Or are you trying to open an iPhoto library on a CD? If you save your iPhoto library to a CD, or DVD you need to copy it to a writable disk, before you can open it in iPhoto.
ANd what is your iPhoto version and your MacOS X version? What happened, directly, before the problem occured?

Unable to active iPad due to lack of Apple ID

I have an iPad I would like to activate however I am unable to due so since the iPad was activated with an Apple ID I do not have. This is a company iPad which I received from a former employee who is no longer with the company and I am unable to contact this person. I had to restore the iPad so I can deploy the iPad to someone else but can't activate it. Is there any way to activate the iPad without the Apple ID?

If you are trying to activate an iPad or iPhone and it is asking for a previous users Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous user to get permission to use the device. If you cannot contact the previous user you will never be able to activate the device and no one can help you do it.

Unable to logging in to sites due to lack of certificate

i can connet to the link since the certificate has expired see attached file

The certificate from https://paydotcom.com/ should be OK (expires in 2017).
Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
* https://support.mozilla.com/kb/Secure+Connection+Failed

Unable to write to library iPhoto library Check that you have permission to write to the library directory

I think my iPhoto memory is full. I cannot get in to delete photos. When I open it I get the Unable to write to library iPhoto libraryCheck that you have permission to write to the library directory" and i can't do anything else. I tried alt/cmd first aid and it didn't work.
I want to get in and move pics over to a USB stick drive but cannot get past the Unable to write to library..message.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Fix: Active directory corrupted (NTDS ISAM Database Corruption errors in eventlog)

It worked for me!
Frank Keunen
IT-Pro Evangelist :: Microsoft IT Infrastructure Engineer
Follow the procedure below to fix Microsoft Active Directory database problems (corrupted Active Directory due to e.g memory issues/disk problems):
1. Reboot the server and press F8. Choose Directory Services Restore Mode from the Menu.
2. Check the physical location of the Winnt\NTDS\ folder.
3. Check the permissions on the \Winnt\NTDS folder. The default permissions are: Administrators – Full Control System – Full Control
4. Check the Winnt\Sysvol\Sysvol folder to make sure it is shared.
5. Check the permissions on the Winnt\Sysvol\Sysvol share. The default permissions are: Share Permissions: —————— Administrators – Full Control Authenticated Users – Full Control Everyone – Read NTFS Permissions: —————– Administrators – Full Control Authenticated
Users – Read & Execute, List Folder Contents, Read Creator Owner – none Server Operators – Read & Execute, List Folder Contents, Read System – Full Control Note: You may not be able to change the permissions on these folders if the Active Directory
database is unavailable because it is damaged, however it is best to know if the permissions are set correctly before you start the recovery process, as it may not be the database that is the problem.
6. Make sure there is a folder in the Sysvol share labeled with the correct name for their domain.
7. Open a command prompt and run NTDSUTIL to verify the paths for the NTDS.dit file. These should match the physical structure from Step 2. To check the file paths type the following commands: Start a command prompt NTDSUTIL Files Info The output should
look similar to: Drive Information: C:\ NTFS (Fixed Drive) free (2.9 Gb) total (3.9 Gb) D:\ NTFS (Fixed Drive) free (3.6 Gb) total (3.9 Gb) DS Path Information: Database : C:\WINNT\NTDS\ntds.dit – 10.1 Mb Backup dir: C:\WINNT\NTDS\dsadata.bak Working dir:
C:\WINNT\NTDS Log dir : C:\WINNT\NTDS – 30.0 Mb total res2.log – 10.0 Mb res1.log – 10.0 Mb edb.log – 10.0 Mb This information is pulled directly from the registry and mismatched paths will cause Active Directory not to start. Type Quit to end the NTDSUTIL
session.
8. Rename the edb.chk file and try to boot to Normal mode. If that fails, proceed with the next steps.
9. Reboot into Directory Services Restore mode again. At the command prompt, use the ESENTUTL to check the integrity of the database. NOTE: You can use NTDSUTIL to check the Integrity, however esentutl is usually more reliable. Type the following command:
ESENTUTL /g “\NTDS.dit” /!10240 /8 /v /x /o (Note: Type the path without the quotes). Note: The default path would be C:\Winnt\NTDS\ntds.dit; however it may be different in some cases. The output will tell you if the database is inconsistent and may produce
a jet_error 1206 stating that the database is corrupt. If the database is inconsistent or corrupt it will need to be recovered or repaired . To recover the database type the following at the command prompt: NTDSUTIL Files Recover If this fails with an error,
type quit until back at the command prompt and repair the database using ESENTUTL by typing the following: ESENTUTL /p “\NTDS.dit” /!10240 /8 /v /x /o (Note: Type the path without the quotes). Note: If you do not put the switches at the end of the command
you will most likely get a Jet_error 1213 “Page size mismatch” error.
10. Delete the log files in the NTDS directory, but do not delete or move the ntds.dit file.
11. The NTDSUTIL tool needs to be run again to check the Integrity of the database and to perform a Semantic Database analysis. To check the integrity, at the command prompt type: NTDSUTIL Files Integrity The output should tell you that the integrity check
completed successfully and prompt that you should perform a Semantic Database Analysis. Type quit. To perform the Semantic Database Analysis type the following at the NTDSUTIL Prompt type: Semantic Database Analysis Go The output will tell you that the Analysis
completed successfully. Type quit and closes the command prompt. NOTE: If you get errors running the Analysis then type the following at the semantic checker prompt: semantic checker: go fix This puts the checker in Fixup mode, which should fix whatever errors
there were.
12. Reboot the server to Normal Mode. If any of these steps fail to recover the database the only alternative is to perform an Authoritative System State restore from backup in Directory Services Restore mode. For more information, please refer to the following
articles: 315136 HOW TO: Complete a Semantic Database Analysis for the Active Directory http://support.microsoft.com/?id=315136 265706 DCDiag and NetDiag in Windows 2000 Facilitate Domain Join and DC Creation http://support.microsoft.com/?id=265706 258007
Error Message: Lsass.exe – System Error : Security Accounts Manager http://support.microsoft.com/?id=258007 265089 Event 1168: Windows 2000 DCs Unable to Boot into Active Directory http://support.microsoft.com/?id=265089 315131 HOW TO: Use Ntdsutil to Manage
Active Directory Files from the Command http://support.microsoft.com/?id=315131 BR – Frank

Frank: This procedure (with some variations required for my environment) worked
perfectly. Thank you very much.
To other readers: The procedure works, but it is a loaded gun. Be careful and methodical.
The specifics of my situation, which I offer as additional information, are:
Windows Server 2003 R2 Standard Edition SP2 with all updates.
One server, 20 clients; of course the server is the domain controller.
I suggest running the command prompt window at an elevated security level ("run as:", followed by unchecking the "restricted" box).
I also suggest changing directories to C:\WINNT\NTDS or C:\WINDOWS\NTDS, as appropriate.
Variations:
The location of the NTDS folder is C:\WINDOWS\NTDS for an install that is not an upgrade from Server 2000.
Step 9 -- the parameters for ESENTUTL are different. For the integrity check I used "ESENTUTL /g NTDS.DIT /8" as the other parameters are not available.
Also in step 9 -- For the repair step that was required I used "ESENTUTL /p NTDS.DIT /8". There was a window warning of a possible data loss, which clicking OK cleared.
Step 11 -- NTDSUTIL FILES INTEGRITY works properly without change. However, the Semantic Database Analysis check cannot be run in a single command. I used "NTDSUTIL SEMANTIC DATABASE ANALYSIS" followed by "GO" at the next prompt. The database analysis does
not report a positive result, but if there is no warning the database passes the analysis. To be certain I ran the "GO FIX" step anyway, which gave identical output.
After this procedure the system started perfectly. I recommend this procedure as the answer to the problem.
-- E. R. Quinones

ISE - Active Directory - LDAPS

I think I understood the customer concern. This is quoted from Microsofthttp://support.microsoft.com/kb/321051
"The Lightweight Directory Access Protocol (LDAP) is used to read from and write to Active Directory. By default, LDAP traffic is transmitted unsecured. You can make LDAP traffic confidential and secure by using Secure Sockets Layer (SSL) / Transport Layer Security (TLS) technology."
So the question now is how can we be sure the ISE communication is secure? ... I understand port 636 is used to transport LDAP-Secure ...
The ISE User Gude indicates that one of the ports required to be open in the case a firewall exists between ISE and ADE is 636 (LDAPS). -(ISE User Guide Page 5-6)
In my case there is no FW between ISE and AD, so how can I be sure LDAPS is being used?
ISE User Guide explais a little about security if the external identity source is an LDAP, but nothing about security is indicated in Active Directory configuration.
Regards.

Hi,
The AD join operations allows you to run PEAP protocol and is much more resilient than using ldap because of the way it joins itself to the domain. It uses kerberos and rpc when performing user authentication.
When using ldaps that is configuration based on when you add the ldap instance.
Sent from Cisco Technical Support iPad App

EMacs cant log into active directory anymore

Hello,
I'm hoping you can give me some insight as to what is going on.
We run an active directory network which is basically all PCs.
We do however have two rooms with 12 eMacs in them each. Up until mid December they had been mostly fine but what we are exeriencing now is that they are having real difficulty logging into the active directory.
If i click on the names of the machines eventually i will see one of three things:
1. Green dot- network accounts available. These we can log into.
2. Yellow dot - some network accounts available. These we cant log into.
3. Red dot - no network accounts available. These we cant log into.
My knowledge of Macs is about a 3 on a scale of 1 to 10.
The DHCP server is server 2003
The eMacs are running OS X 10.4.11
I can log into them as local administrator and can browse the network and even get onto the internet when they are unable to log onto Active directory.
What ive done so far...
1. If i unbind and then rebind the mac using directory access they can log in for a while but then randomly they change so that we cant log into them anymore.
2. gave each of the macs an ip reservation on the dhcp server so that they always pick up the same ip address.
3. removed them from Active directory and re added them. even gave them different names.
4. Changed out the switch they were plugged into.
none of these has solved the issue so far so im hoping that someone might have seen something like this before...
thank you.

Hi halo511, and a warm welcome to the forums!
My knowledge of Win/2003 is about 3 on a scale of 1 to 100!
I wonder if these might help...
http://support.microsoft.com/kb/834498
http://www.macwindows.com/Win2003.html
http://www.macosxhints.com/article.php?story=20050302023720578
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
Does the Server have more than 1 NIC?
http://forum.soft32.com/mac/Windows-Server-2003-MacIntosh-ftopict7128.html
For stubborn Mac<->Windows® problems...
http://www.thursby.com/products/admitmac.html

Does one of the Lync SQL databases store the active directory username or SID of the person who made a call ?

I am trying to write a report that uses data from Lync (2010), Active directory (AD) and other databases.
I need to match data from Lync with records in active directory.
When you make/recieve a call, the session details has a userid column - a foreign key to the users table, which has the UserURI - the users emails adddress or telephone number.
However, trying to mach the data, I have noticed that someones email address can change so that what is in active directory does not match that used as the SIPaddress in Lync.
I need a field that matches in Active directory and Lync to be able to link a users call records with their active directroy records.
I was wondering how Lync decides which Lync user you are when it auto logins you in.
Does it do it on the basis of your phone number, AD username or something else ?
If so , where in Lync does it store the mapping from whatever it uses to your Lync userid ?
Greg

The msrtcsip-primaryuseraddress attribute in AD is where the users SIP address is stored.
This can change still, but generally that should not be very often except maybe a name change or domain name change.
Almost everything in Lync is based on the SIP address. In CDR's case, it is just recording SIP messages as they pass through the front end; it has no visibility into the actual AD account that sent it.
If you will need to match user SIP addresses back to live AD accounts, even after a SIP address change, then I would recommend setting up a custom AD attribute to store their SIP account history and have a policy to update that attribute each time someone's
SIP address gets changed.

Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)

Hi All,
I could see following error event in all client computers , Could you please some one help me on this ?
Log Name:      Application
Source:
Microsoft-Windows-CertificateServicesClient-CredentialRoaming
Event ID:      1005
Level:         Error
Description: Certificate Services Client: Credential Roaming failed to write to the Active Directory. Error code 5 (Access is denied.)
Regards, Srinivasu.Muchcherla

If you are not using certificates and Credential Roaming for clients then simply ignore the error message.
If you are using certificates then you are getting access denied message when Credential Roaming is trying to write to your AD. More details about Credential Roaming here: http://blogs.technet.com/b/askds/archive/2009/01/06/certs-on-wheels-understanding-credential-roaming.aspx
http://blogs.technet.com/b/instan/archive/2009/05/26/considerations-for-implementing-credential-roaming.aspx
This is probably related to the fact that your schema version not 44 or higher: https://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a6e61-68c4-47d3-ae79-8296cb3be315/certificateservicesclientcredentialroaming-errors?forum=winserverGP
Active Directory
ObjectVersion
Windows 2000
13
Windows 2003
30
Windows 2003 R2
31
Windows 2008
44
Windows 2008 R2
47
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error. : Error: An Active Directory Constraint Violation error occurred

Hello,
We have a multi domain parent child AD domain infrastructure and now we upgraded our exchange from Exchange 2007 to Exchange 2013. Since last few days, we see the below error on the mailbox server event viewer.
EVENT ID : 1121
The Microsoft Exchange Mailbox Replication service was unable to process a request due to an unexpected error.
Request GUID: '93a7d1ca-68a1-4cd9-9edb-a4ce2f7bb4cd'
Database GUID: '83d028ec-439d-4904-a0e4-1d3bc0f58809'
Error: An Active Directory Constraint Violation error occurred on <domain controller FQDN>. Additional information: The name reference is invalid.
This may be caused by replication latency between Active Directory domain controllers.
Active directory response: 000020B5: AtrErr: DSID-0315286E, #1:
Our Exchange setup is in parent domain, but we keep on getting this error for various domain controllers in each child domain in the same site. We then configured one of the parent domain domain controller on Exchange. Still we are getting this error for
the configured parent domain DC.
Verified the AD replication and there is no latency or pending stuffs.
Any support to resolve this issue will be highly appreciated. Thank you in advance.
Regards,
Jnana R Dash

Hi,
In addition to Ed's suggestion, I would like to clarify the following things for troubleshooting:
1. Please restart IIS at first.
2. If the issue persists, please ping your DC on your Exchange server to check if Exchange can communicate with DC.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Certificate issues Active Directory Certificate Services could not process request 3699 due to an error: The revocation function was unable to check revocation because the revocation server was offline. 0x80092013

Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Cris

hello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej.

Lync Hybrid : Unable to write to active directory due to lack of permission

Similar Messages

Maybe you are looking for