M1212nf printer wont work wireless with Windows 10

I installed Windows 10 two days ago to my computer as well as two others in the house.We were all using a wireless network.I now have to use the printer through the USB port on my computer only. The wireless feature does not function.When I try to update I am only able to find drivers for a 1210 series system. The driver is rejected and I am told it is not compatible with my printer.How do I restore the connection without going back to Windows 8.1? Is there a separate update for this product based on Windows 10?How do i solve this problem?

Hi , I read your post and see that you need the drivers for Windows 10. I would be happy to help you.
This model has a USB and Ethernet connection only. I have provided a link to the HP LaserJet Full Feature Software and Driver. The Windows 8.1 and the Windows 10 are the same drivers and can be used for both operating systems.Please note : If your device had full support (not just basic print or scan) in Windows 7 or 8 then your device is supported, but may not immediately show up on hp.com for Windows 10: Please download the Windows 8.1 drivers and use those (they have been tested and worked with Windows10) If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Similar Messages

How to make my pixma ip 90 to work wireless with windows 7/64

how to make my pixma ip 90 to work wireless with windows 7/64 i installed the bu-10 it is authorized but can't make it to print wireless.

Hi again manny2249,
If the Bluetooth Settings feature does not appear on the Canon iP90 Setup Utility screen, the Bluetooth unit may not be installed correctly. We recommend contacting us via one of the support methods listed at the Contact Us link below for assistance with setting up the printer via Bluetooth.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can't get my hp printer to work wireless with my iMac

I am so computer illiterate, it's not funny. I am really getting frustrated with trying to get my new HP Photosart all-in-one c7820 to work with my new iMac. This computer is awesome, but I am so used to pc's because that's all I have ever known. I connected the new iMac sucessfully to our wireless modem in the house, and connected the printer to the same wireless connection. They both say they are connected and working, but nothing will print. I DID get a message "The application HP Printer Utility quit unexpetedly" duting the installation but it didn't seem to matter, it said it was "installed successfully" When I try to print something, it seems like it's going to work, but it says stopped,and I can't get it to work.
I think I am missing something with the wireless info or something.
Anyone have any ideas? (In lamemans terms please)
thanks,
U

Hi Ursula M-
Actually I find that opening statement very funny! Greetings and welcome to the Apple boards
Have you tried going to the HP website and downloading and installing the latest driver for that printer?
Luck-
-DaddyPaycheck

HT203164 Cannot print CD Jewel Case Insert using Windows 7; iTunes print options work fine from Windows XP; using iTunes print option CD Jewel Case Insert with Windows 7 prints jumbled mess?

Cannot print CD Jewel Case Insert using Windows 7. iTunes print options work fine with Windows XP, but attempting to print CD Jewel Case Insert from Windows 7 yields jumbled mess.

I'm having the same issue - when I try to change any print options iTunes freezes and I have to end the process in Task Manager... I was trying to turn off duplex printing and the printer option screen wouldn't take any input. I changed the default printer properties to turn off duplex; iTunes did not reflect the updated preferences. It looks like there is an unknown issue with the printer setup module - guess that doesn't get much use anymore or Q/A should have picked up the issue...

How can I get my workforce 600 printer to work wireless

Does anyone know how to get an Epson Workforce 600 printer to work wireless with 10.8.3 MacBook Air.

I know my MBP works wireless so it can be done.
I thought that was what helped me do it.
It appears not.
Try http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&info Type=News&oid=110566&prodoid=63076679&noteoid=117516
Allan

I need a printer that will work wirelessly with Lion os

Please help me find an all in one printer that will work wirelessly with the new Lion OS.
I'm on my third printer...
Thanks

Exactly what did you do when trying to set up the printers? Did you follow the mfr's instructions?
I also have an Epson (Artisan 810) and it works flawlessly - both wired and wirelessly. If I remember correctly, the instructions specifically said in order to set it up wirelessly, I had to connect it via USB first and then unplugged the cable at a specific point (following the instructions). And, the instructions included having to copy the printer's MAC address (a series of numbers and letters) from the printer display panel and enter it at my router's (Netgear) online setup site.

HP 8600 all in one Printer Scanner to Computer with Windows 8

i can not get the printer to reconize the Computor i want to scan to i Have HP Printer 8600 all in one printer and HP computor with Windows 8 (wireless)

Hello Stringfield, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then recommend downloading and running the HP Print and Scan Doctor.
Please let me know the results. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Infinity won't work wirelessly with Ubuntu OS

I'm running Ubuntu Netbook Edition and upgraded my BT broadband to Infinity on 28.12.11, using the same HomeHub3 that worked perfectly well with the old Total service.
It doesn't work, wirelessly. I can get an apparently strong connection, but its agonisingly slow. At the same time, an ethernet connection works well, When I switch from one to the other and test the speed, I can watch the bandwidth fall away (i.e.: it isn't immediately disconnected.)
Nobody at BT can or will help, telling me that Ubuntu is 'unsupported' (i.e.: it's my problem). I reported this problem to BT - ref: xxxxxx-xxxxxx - via its complaints form on 28.12.11, but have had no response.
I've spent much time this past week on internet help forums. It transpies that BT has known about this issue with Ununtu for six months, but has apparently done nothing about it and cannot suggest a solution.
Suggested workarounds from other Ubuntu users involve manually reconfiguring one's connection, but my netbook won't allow me to apply the changed settings, or to change the router settings from N to G tech., but that only worked temporarily for me and, besides, my netbook is only a couple of year old.
When I was sold Infinity, nobody mentioned that it doesn't work with Ubuntu. Frankly, I feel it was mis-sold as I intended to increase the bandwidth of my Total account and was persuaded to take Infinity on the grounds that it's a superior service for the same price. Not from where I sit, it isn't.
The only solution I can see is to get BT to switch me back to their Total service, which suited me fine. I'm going to get their engineer to come back and uninstall Infinity. I will also complain to Offcom, as this situation could easily have been avoided had the BT sales person told me that Infinity won't work wirelessly with Ubuntu.

Firstly your negotiating skills with BT are far better than mine....
"....Total account and was persuaded to take Infinity on the grounds that it's a superior service for the same price"
I was on BT Total BB and had to pay an extra £2 pm for Infinity and then an extra £4.75pm uplift of the calls package to give me the same anytime calls I had previously.... And had to re-start another 18month contract!!! Ohhh well.
Right onto the problem... Webby's suggestion of making sure your on a clear or least used wireless channel is good advice.
Here is the link to the free software http://www.metageek.net/products/inssider/
Have a look at a demo,- http://www.youtube.com/watch?v=pf2kZCfYTxI
To be honest I would move your HH3 from the Automatic setting to a fixed wireless channel as they seem to work better like that.
If your Operating System won't work with Inssider I would then just try a different channel starting at 1 and work up... seeing how things go.
Regarding setting your HH3 to wireless g, that is a very backward step as the most you'll get over that would be around 20Mbps depending on your distance from hub etc.
Couple of pics comparing my speed test over wireless g and n in THIS POST.
Another thing I would try is a wireless n USB adapter... just in case your m/c is only g
Links of how to identify what yours is and pictures of the difference in the "Network Sharing Centre".. 54Mbps being g and anything above is wireless n....
Wireless n gives the best speed assuming your Infinity download IP is more than 20Mbps. Also wireless n signal is more robust penetrating walls etc.
There are links to the type of wireless n adapters I use... Picture of one HERE, (Don't need the extender cable shown in that picture).
wwwebber's post was very useful.-
"I use Ubuntu on my laptop with BT Infinity & HH3 with no problems at all. BT is not at fault here - they do not support Ubuntu."
Confirming Infinity and Unbunto do work...
You say ".....but my netbook won't allow me to apply the changed settings, or to change the router settings .... but that only worked temporarily for me......"
As changing settings worked temporarily you must have been able to log into your HH3.
If you really can't log in can you borrow a friends netbook running windows to get logged in perhaps?
Log in,- http://bthomehub.home/html/home/home.html go to Advanced settings, wireless. and change Channel settings from Automatic to a channel number then click on Apply.
I would place your laptop near to the HH3 and move the HH3 wireless channel to a clear channel or start at channel 1.
Try to get a good wireless n speed..... example of mine 37Mbps over http://www.speedtest.net/
Then when you have a reasonable speed move your laptop away... you will notice a drop over distance that's normal.
I am 20' away from my HH3 and get 37Mbps through a plasterboard wall.
Regarding other routers people have used http://community.bt.com/t5/BT-Infinity/List-of-Routers-to-replace-Home-Hub-3/td-p/298203
And see Ady's msg #21 and #25 in THIS THREAD.
"'ll try the netbook in different locations over the w/e and hope from a solution from Ubuntu before remonstrating further with BT".
Please let us know how you get on.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Can't get Canon MP620 to work wirelessly with MacBook Pro or AirPort

I bought a Canon MP620 printer at the Apple Store. I specifically asked if it would work wirelessly with my MacBook Pro or AirPort Express since I read comments to the contrary on here. I was assured it would work without a problem and I wouldn't need to upgrade to AirPort Extreme. My Mac is not able to find my printer. Does anyone have any suggestions? I did all of the troubleshooting and nothing works. I have another printer plugged into my AirPort Express so I can't plug this one in (was told at Apple Store that I wouldn't need to).

Hi magcat72,
As BDAqua has mentioned already, you need to configure the wireless network settings first. This is done by connecting the Mac directly to the printer via USB. But before you do this, stick the MP620 CD into your Mac and install the drivers and the Canon IJ Network utility. Once these have been added to the Mac, you can then connect the 620 to the Mac. This should automatically add the printer to your printer list (in Print & Fax). If it doesn't, then you can add the printer manually, by clicking the + and using the Default view.
Once you have the printer queue installed, you can open the queue and click the Utility icon. This will display the MP620 connected via USB. Select it and then click the Network button. This will now guide you through connecting the MP620 to your wireless network.
Once you have completed the network configuration for the printer, you can turn it off and unplug the USB cable from your Mac. You can then move the printer to where you want it to reside and turn it back on again.
Now you need to add the network printer queue, as the previous queue was for direct USB. In fact, to save you selecting the wrong printer, delete the current MP620 from your list by using the - (minus) button.
To add the network printer queue, select to Add a printer and then select More Printers. In the top menu you should see Canon IJ Network. Select this and after a short while the printer should appear with its MAC address (a series of numbers and letters separated by colons) in the lower pane. Select the 620 and click Add.
Now you should be ready to print. If any of the above doesn't work for you then please reply.
PaHu

How Do I Set Printer to Work Wirelessly?

Help! I have a new MacBook Pro and a HPC4780 printer and am trying to get the printer to work wirelessly. The HP person walked me through the printer set up over the phone and the printer itself works. However, it will not print off my computer. I have an airport express router. When I ran the test on the printer I received a Failed response for " Network Name (SSID) found". I would appreciate any guidance at this time. Am getting frustrated! Thanks.

Hello Anne.
I'm more than happy to help you through the steps. But the more I think about how it can impact your Mac's ability to connect to the Net and your beginner status then I think we should try a different tack. Obviously your Mac has no issue connecting to your network and is currently working fine so I suggest we need to confirm all these network settings in the Mac and then somehow check what the printer is set to.
I have to inform you that I have an Airport Extreme, not an Express, so apologies to you now if some of the steps don't apply. Also, changing the settings in the Mac will impact your ability to connect to your wireless network and most likely the Internet. If you don't feel comfortable with changing these Mac network settings and impacting your ability to connect to the Net then it might be best to leave things alone and get some help from the Apple store. If you are confident with the Mac then here's some steps...
So open the Airport Utility, you should see your Airport Express in the list of the devices in the left column and in the right pane some information about the device. At the bottom of this pane is the Manual Setup button - press this.
The new view will now show several icons in the toolbar. The one you want is Airport, which is probably selected by default. With the Airport icon selected you will see several buttons below it, such as Summary, Base Station, Wireless and Access Control. Press Wireless. This is where you will see your wireless network name (SSID) and the type of wireless security being used. Write down your network name and the type of security you are using. Note that the password is not shown here so hopefully you know what you set previously.
With the Airport Utility still open press the Advanced icon in the toolbar. Under the 'Logging and Statistics' tab is the button 'Logs & Statistics'. Press this and then press the Wireless Clients button. This will show all the devices currently connected to the Airport Express. The names of the computers is not shown - only their network address so you would need to know what the HP network address (also called MAC address) is to see if it was one of the connected devices. I would expect that based on the error you got before this printer is not showing in the list. You may have to check your HP documentation to determine what its MAC address is.
With the Airport Utility still open go back through the steps the HP support got you to do to connect the device to your network, using the information you obtained from the Airport Utility. If the device appears to connect to your network then you can check the Wireless Clients view of Airport Utility to see if it shows the HP connection.
Hope this helps you. Please reply if you need more assistance.

Printer wont work since i installed time capsule

Printer wont work since i installed time capsule.

vincentfromscottsdale wrote:
Printer wont work since i installed time capsule.
Many posts give minimal information but I think you probably should receive the grand prize.. least info ever delivered in a post.
From your post I know that you installed a time capsule. I have no idea how or to what.
That your printer.. type model connection all unknown now does not work..
Sorry but the crystal ball is totalled and the other black arts of which wireless is perhaps one, is off-limits.
Minimum info needed.
What printer?
Connected how?
Is it still available on the network? Can you ping it?
Just the facts please.

I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...

I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...
Also, when im viewing websites and i find something i wish to print, same again, if i simply click on the print option at the top right of the screen nothing happens... the only way I can print is if i copy the weblink of the site page then click on my HP eprint app and paste the web link, then select print, it prints off fine.. but its it such a pain to keep copying and pasting links or screen dumping emails just to print...

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?

I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?
If so, what do I need to d

WOsloop_ORD wrote:
I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?
No you don't.
Mac's auto-defragment by writing 2GB+ sized files and smaller to one space on the drive, so you really don't need to worry about it.
If your going to parititon your drive or need a large space of free space, then Carbon Copy Cloning the entire OS x parittion to a external drive, option booting off of it and then erasing and reverse cloning is the approved method of defragmenting and freeing up disk space, rahter than using defragmentaiton software that can cause issues and make the machine inoperatible.
http://www.bombich.com/
If you need steps to *cough* clean your Mac of caches and whatnot less your kid/wife/mother/girlfriend/boss, see's it then the steps are as follows.
1: Clean/clear your browser caches first, delete your history etc. from within the program itself, delete any files on the machine by dragging to Trash and emtpy Trash (secure erase not needed if you follow the steps later)
2: Download CCleaner for the Mac and run that
3: Download OnyX for the Mac and run all the cleaning and maintainece, reboot at the end.
4: For scrubbing hard drives of traces (deleted files), use Apple's Disk Utility > Erase Free Space option: Zero (or 7x if you need military/foresic level type deletion, but it takes overnight to complete)
Make sure your browser plug-ins are current, Flash, Silverlight especially.
https://www.mozilla.org/en-US/plugincheck/
And your Mac needs more codecs, search for Perian, VLC and Flip4Mac, install those.

My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPo

My Classic IPod had been working perfectly with Windows Vista OS and on a dock. I left it unattended for 10 days, recharged it and tried to play music on the dock. All that shows on the screen is the Apple Logo and I am unable to restart or update the IPod. Any ideas???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Make Skype work properly with Windows DPI scaling for high resolution displays

Hello, As of now, Skype does not work well with Windows DPI scaling. Everything looks fuzzy (fonts, icons, etc).Microsoft's recommendation is to turn off the DPI scaling ( http://support.microsoft.com/kb/2900023 ) but in this case, the text is too tiny to be read. Basically everyone with a high resolution display is stuck with either tiny of fuzzy fonts, making Skype unusable. It's really a pity because other Microsoft programs such as Office work perfectly with Windows DPI scaling, and Skype also looks great on Mac with Retina display. With high DPI displays becoming more and more common, this is a must have feature. Thanks for reading!

pokegwa wrote:
Hello, As of now, Skype does not work well with Windows DPI scaling. Everything looks fuzzy (fonts, icons, etc).Microsoft's recommendation is to turn off the DPI scaling ( http://support.microsoft.com/kb/2900023 ) but in this case, the text is too tiny to be read. Basically everyone with a high resolution display is stuck with either tiny of fuzzy fonts, making Skype unusable. It's really a pity because other Microsoft programs such as Office work perfectly with Windows DPI scaling, and Skype also looks great on Mac with Retina display. With high DPI displays becoming more and more common, this is a must have feature. Thanks for reading!It's been two years actually. As you can see Skype is really broken on HDPI displays and the issue is still being ignored/unacknowledged by Skype devs.

M1212nf printer wont work wireless with Windows 10

Similar Messages

Maybe you are looking for