Mac anyconnect 3.1 issue

I installed Anyconnect 3.1 on Mac 10.8.2. It worked but had an error on Web Security so I decided to uninstall and reinstall without that feature. The installation was successful but it gives me the following error message. I reformatted my HD with a fresh install of the OS but it still failed logging in with the same error. Please let me know if anyone else has had this problem and has a solution. Thanks
The VPN client was unable to successfully verify the IP forwarding table modifications. A VPN connection will not be established.
Description AnyConnect could not verify the successful application of all the VPN configuration settings to the local IP forwarding table. A VPN connection is not permitted because settings that are not applied could compromise both its security and operation. Other software running on the endpoint might also be actively altering the IP forwarding table, interfering with the AnyConnect configuration.
Recommended User Response Restart the computer or device. Exit all applications. Restart the VPN connection. If necessary, report the error to your organization's technical support.
AnyConnect was not able to establish a connection to the specified secure gateway. Please try connecting again.
Description A local network connectivity problem caused a VPN connection attempt to fail after a successful authentication.
Recommended User Response Retry the VPN connection.
October 15, 2012
The following user messages appear on the AnyConnect client GUI. A description follows each message, along with recommended user and administrator responses if applicable. The recommended administrator responses apply to IT representatives with monitoring and configuration access to the secure gateway configured to provide VPN access.
Sent from Cisco Technical Support iPhone App

We need kernel panic log.
How to log a kernel panic:
http://support.apple.com/kb/HT2546

Similar Messages

HELP! Mac Mini Server Journaling issue during reinstall

H E L P !
Mac Mini Server Journaling issue...
Hi there,
I have taken on a nearly new Mac Mini Server running Snow Leopard.
It has a RAID set up already.
When I try to reinstall the OS from the original disk the installation willl not let me select the drive as it says it is not journaled.
I have then opened Disk Utility and selected the main HD (there is one HD plus 2 Raid slices listed).
From this point on there are no options available:
The only 2 tabs above the right hand window are 'First Aid' and 'RAID'.
First Aid shows all 4 options greyed out.
Selecting the main HD and then going to File>Enable Journaling will not work as 'Enable Journaling' is greyed out.
Deleting the RAID does not work either, as the HD (mirrored RAID set) and both RAID sclices have the padlock icon next to them.
Can anyone help?
I really need to reinstall the OS and set the machine up with a TimeMachine Capsule asap!
Many thanks,
Haberdashery

Sorted!
All is good now : )

HT3258 I have installed Mac 10.8 having issues w/HP 2605dn printer. I have done the updates as required still have issues getting it to print on network. It prints fine on USB port, but I need it networked, what gives?

I have installed Mac 10.8 having issues w/HP 2605dn printer. I have done the updates as required still have issues getting it to print on network. It prints fine on USB port, but I need it networked, what gives?

Thanks for your reply, this puts my mind (what's left of it) at rest. Now to sort out the new printer broblems since installing oldMags

Mac Snow Leopard install issues w/ CS?

I'm upgrading my Mac OS to Snow Leopard (10.6.3), and prior to doing so, I decided to go online and search to see if there were any issues or recos I could fine re: the upgrade. I'm glad I did. I seems there are a few problems with Adobe CS softwares – saving files and software crashes with Snow L.
I am running all CS4 versions, with the exception of InDesign (CS6). Did Mac/Adobe resolve the issues with the 10.6.3 version?

CS4 should work fine without any issue on Snow Leopard , there could be problem that could be system or application specific which we can try and help you with.

This has to be a Mac OS X driver issue - My Bluetooth Mouse just this secon

My Bluetooth Mouse just this second stop working.

My Bluetooth Mouse just this second stop working.
And? Are you expecting someone to be able to diagnose and solve the problem for you based on that statement?
Why are you so certain it "has to be a Mac OS X driver issue"? Have you done something to the Bluetooth system software +"just this second"+ which has caused it stop working?
Some other possibilities are:
• Batteries could've run out.
• Bluetooth hardware in the mouse could've failed
• Bluetooth hardware in the Mac could've failed
• Bluetooth preferences could be corrupted
• Mac and Mouse may have lost their "pairing" info
Unfortunately as you've not provided any information about the problem whatsoever, not even told us what brand or model of Bluetooth mouse you're referring to, or mentioned *a single thing* you've tried already to resolve this, its impossible to help any further.

AnyConnect SSL Client issue with Mac OS X

Hello this seems to be a very common issue with AnyConnect working on Mac OS X. A lot of random sites talk about this.
I have a Cisco 2801 running IOS 12.4(22)T (ADV ENT SRV) with AnyConnect 2.3 package installed.
From Windows I can connect without any issues.
From a Mac OS X after providing login credentials the AnyConnect log says its connecting... checking for updates... and then disconnects.
If this does work on Mac OS X what is needed (or needs to be configured) to get this to work properly on Mac OS X?
Thank you!

Hello All,
I recently experienced the same problem when my company upgraded to our entire company from the stone age to a VPN system using the Cisco AnyConnect. At first, I had the same problem as described above. Then my IT guy and I got on the phone with Cisco.
Here is the solution that worked for me. First, our IT department had to specifically load a MAC connection file into the VPN firewall to allow access for MacIntosh computers. Then I redownloaded the latest anyconnect files and updated whatever else through the vpn.yourcompany.com site. Finally, from www.citrix.com/download I downloaded (on the RH side under featured downloads) the appropriate Citrix ICA File.
Everything works fine now. I don't know if this will work for you, but it did the trick for us.

Mac Pro Screen Freezing Issue with NVIDIA 8800 GT too

There were lots of entry in threads, where the screen freezing issue was described (disorted screen with strange lines, only reboot helps). Nearly all cases seem to be related to the ATI 2600 card.
http://discussions.apple.com/thread.jspa?threadID=1358062&tstart=30
http://discussions.apple.com/thread.jspa?threadID=1365277&tstart=0
I opened this new thread to show, that this problems occurs not only for the ATI card but for the NVIDIA 8800 card, too.
My MacPro was delivered 8 days ago and was running without any problems. But all of a sudden, I got that screen freeze. And it wasn't the first time, I was heavely working 2-3 hours with that computer.
In total, 2 screen freezes showed on my computer. The first one during working with the computer. The second one during booting into MacOS X. The screen freeze occured during the boot phase with the grey screen and the spinning wheel.
My configuration:
MacPro 2.8, Dual Quad Core
6 GB RAM
3 harddisks, 1 standard from Apple, 2 Samsung with 750GB
MacOS 10.5.2
Formac 20" Monitor
Perhaps others have this problem, too? Than we should emphasize, that this is not an ATI related problem.

I've actually been having the freezing issue for a while now but I didn't have the know-how to troubleshoot it (PC tech trying to support the only Mac lab in the building).
MacPro will freeze randomly (no trend in time, system strain, or open programs). The mouse will operate but will not interact with anything.
Specs:
MacPro - Model 1,1
Dual Core Xeon 2.66
2gb RAM
nVidia GeForce 7300 GT
Mac OS 10.4.11
The machine always has 2 displays connected to it so the workaround that was discussed for the ATI 2600 doesn't apply. I had 1 display connected here in my shop and it froze for that as well.
Message was edited by: DocturKnowles

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

The Mac HD has booting issues - how do I make a clone that is free of these?

I spilled water on my MacBook Air (10.6.8) and now it has booting issues.
When I shut it down, the power button doesn't work to boot it. But when I close the lid, it powers up. However even when I shut it down AND close the lid, it keeps booting up and staying on.
So I have to send it for repairs.
I cloned the Mac HD using Carbon Copy Cloner and put the clone using Migration Assistant onto the new machine (MacBook Pro - 10.7.2). Now the MacBook Pro won't boot at all. Before this, it was working fine.
So I want to know how to make a clone of the Mac HD of the MacBook Air that won't have booting issues when I migrate the clone to another machine.
I have to make a clone of the MacBook Air before I send it off for repairs as the last back up is quite old and out of date.
Also the fact that the Mac HD of the MBA has booting issues affects the ability to access the Boot Camp (Windows 7 partition) as now I can't even boot the new machine. (But I am asking about Boot Camp in another section.)
It seems like a catch-22 situation. I can't fix the booting problem until I send it off to the repair center to get the computer fixed. And yet the booting problem is preventing me from making a usable clone of the Mac HD.
I think the booting problem is a software problem because the MacBook Pro was working perfectly before I migrated the Mac HD of the MBA onto it, The MBP is only two days old. I migrated another Mac HD backup (one I made before the booting issues came up) onto the MBP on the first day I bought it and the MBP worked fine.
Do you think I will just have to clone things separately manually? I mean should I format an external hard drive, plug it in the USB port, and transfer the files I need to save? What files/folders should I save? Can I move folders or do I have to move files? I have many files in Desktop, Downloads, Documents. I also want to save my applications. I want to save the BookMarks of Opera, Firefox.
Will this take a long time? I have used about 200 GB of the MBA's hard drive.
Any advice? Thanks.
I don't use Time Machine and am not confident about using it. Will it be substantially different to CCC in the way it clones files? Will a Time Machine clone after migration contaminate the second computer with booting issues?
I am not so worried about the booting issues on the second computer. I know it's from the faulty clone and nothing to do with the machine itself. I can take it to Apple Genius Bar and they will probably be able to reinstall a new operating system on the machine and I can start from scratch, I think. I am more worried about how to save and restore my data from the old machine. Thanks for any advice.

applecore_eater wrote:
I cloned the Mac HD using Carbon Copy Cloner and put the clone using Migration Assistant onto the new machine (MacBook Pro - 10.7.2). Now the MacBook Pro won't boot at all. Before this, it was working fine.
Ok, you used Migraine Assistant to try to transfer the account from the clone drive to the MBP and it didn't work, that's ok, it can be fixed by command r booting into Lion Recovery and simply erasing and reinstalling Lion from Apple's servers. (AppleID)
I suggest you transfer the account data manually because the clone is a copy of a failing drive/corruption, use the same name in System Preferences >Accounts, drag and drop files transfer and hold option key, click on Purchases in crapStore to redownload to the new machine, install other programs from fresh sources. Cleaner machine that way. So that shoudl fix the MBP.
in the future, try to avoid Apple's "answers" like Migraine Assistant as much as possible, it's really not reliable in any sense in actuality.
So I want to know how to make a clone of the Mac HD of the MacBook Air that won't have booting issues when I migrate the clone to another machine.
You can't boot a clone of OS X from another type Mac on another type Mac, only the same exact machine model.
In your case the Migraine Assistant didn't work, so you'll have to manually install.
Also the fact that the Mac HD of the MBA has booting issues affects the ability to access the Boot Camp (Windows 7 partition) as now I can't even boot the new machine. (But I am asking about Boot Camp in another section.)
Well it's possible that Windows or something messed up the GUID partition map of the Mac, why it has booting issues. Likely why Migraine Assistant didn't work.
You'll have to set up BootCamp again on the new MBP machine, talk to Microsoft about validation on the new machine and return your Windows files, programs from fresh sources.
Likely you got malware and it was trying to write to the boot sector of the Mac, mistaking the MBR portion of the GPT for a full Windows one. This also happens when Mac users try to install Linux on their Mac's.
Unless you need full hardware performance, you really should look at virtualization software like VMFusion, Parallels Desktop or even VirtuaBox (might be outdated) and run Windows in a window on OS X instead. Much easier to recover from malware that way.
It seems like a catch-22 situation. I can't fix the booting problem until I send it off to the repair center to get the computer fixed. And yet the booting problem is preventing me from making a usable clone of the Mac HD.
Well if you make a clone, it's going to be junk any.
What you need to do is fix the new MBP machine first then use Firewire Target Disk Mode (firewire 800/400 cable and adpater if needed) and grab a copy of your files off the sick Mac or off the sick clone.
The drive is likely fine, it's just not booting and that could mean some sort of malware/drive/data corruption.
You'll have to install third party software on the new fixed MacBook Pro to read the NTFS drive format of the Windows 7 bootcamp parittion when the sick MacAir is in Firewire Target Disk Mode.
http://www.paragon-software.com/home/ntfs-mac/
https://support.apple.com/kb/HT1661

Mac book pro - general issues i'm having

I swear since i bought my macbook pro 9 months ago there has been nothing but trouble with it. The longer i have it the more that seems to go wrong. Now i have a few issues and were wondering if these were normal or not really.
The first issue i have is with the touch pad button. Over time it feels as if it has become slightly raised to one side since i tend to use the left side of it to click down on and my right hand to maneuver the track pad. Anyway basically the right side has now become raised up and makes a horrible clicking noise whenever its used and has to be pressed down with alot of pressure.
Another issue i've had is the heat of my laptop. I know they get hot on your legs which isn't the issue. I'm more worried if it's healthy for it to be so hot. Using a widget i have i can check the temp of certain parts, some parts get up to 70 degrees celcius or more =/. On a normal computer that would mean goodbye from what i know.
Atm just using safari and nothing else but coconut battery open here's the following temperatures (Degrees Celcius):
HD: 42
CPU A: 57
Airport Card: 55
Enclosure base: 36
GPU Diode: 65
GPU Heatsink: 56
Heat Sink A: 57
Heat sink B: 45
Now I'm a big multi tasker, and when i have photoshop, firefox, safari (I us them both for different tasks) and illustartor open as well as MSN and skype these can get in excess of 60 degrees C. When playing games it gets even worse, often 70+ degrees C. Now these temperatures are worrying to me. Should i be worried?
Now i also have the issue of my macbook pro being horribly sluggish. My hard drive has 60GB free. Now what possibly may be the problem is I have windows XP dual booted as well as I often use a virtual machine for MIRC (I have yet to find a decent alternate mac based client i'm happy with). Anyway what can i do to increase my performance, because i'm not very happy right now with how sluggish it gets.
Another problem is the damned chargers. I am currently on my third one. I'm worried that when my warrenty goes im going to have to keep replacing them =/. My first one basically overheated, sparked and died. Wouldnt work no more. Second one the cord had exposed wires at the base of the charger. Now has anyone else had issues with this?
Ok, and that's it for now.

What gets to 70ºC, smash_you2 ? There is nothing abnormal about CPU temps around 70ºC when the computer is working moderately hard. Core 2 Duo temps can get much higher than this. Many Dell users, for example were reporting temps closer to 100ºC for their C2D CPU's on their discussion boards recently. 70ºC is typical of working fairly hard, but far from extreme.
One thing I would be worried about from your comments, though, is the suggestion of deformation in the track pad/ button area. THis can sometimes result from a defective battery becoming deformed. THis, in turn can result in greater heat from the charging system and the battery itself. I'd be more stressed about this possibility than the temperatures that your widget is quoting. Check your battery condition using system profiler.
Running in "dual boot" mode will, of course, always diminish performance generally, as your computer won't have the same CPU and memory resources available for the primary OS that it would otherwise possess.
Cheers
Rod

BB Curve, Pocket Mac, Mac Book Pro sync issues, all of a sudden

Hi, new to the forum here, but not to Blackberry or Mac! I've been using this sync combo since it's inception back when I first got a 7100, then with my T-Mobile Curve when it came out, with little or no problems. I now, all of a sudden, have issues! I did look around at some other posts to see if I could find a solution, or someone with the same problem, but I think my prob is slightly different, so forgive me if I'm repeating some things here that others already have talked about!
After dropping my Curve over in Europe last month and cracking the screen (ugh), I got a replacement from the insurance company, which turned out to be a remanufactured phone (for the $130 deductible??? - another topic!)....... there were apps missing, and the phones' keypad did not feel right, but IT DID sync ok... at any rate, I got them to send me a NEW phone, which I just received. It has the same exact software version as the other phones I had.
I did my usual USB sync with Pocket Mac, starting just with the contacts (mac address book) and notes (stickies). I selected 'overwrite device' in the advanced prefs of pocket mac (all latest versions installed, with latest drivers as well). Worked fine, as usual.
I then added some addresses in my address book on the mac, and went to do another sync. It was at this point that the sync did not work, either in 'overwrite device' or 'two way sync'. The added addresses were not on my phone.
What I've tried, and noticed so far:
On the phone, during the 2nd sync, no matter which pref I choose, the ARROW on the connection status window on the phone is going the WRONG WAY, towards the computer icon, not the phone icon. Since I added info only on the computer, the arrow should be going toward the phone, especially when in 'overwrite device' pref. This was NOT the case on the original sync, when the phones' address book was empty; the arrow was going the right way, towards the phone. I did the 'wipe/reset' that Brodie suggested in another post, which is going to the address book on the phone->menu->options->scroll to 'default' and type in 'rset'... that wiped the address book from the phone.
I then did another sync, pref in 'overwrite device' and again it worked fine, with all my addresses, including the recent entries, transferred as they should be to my Curve...
I again made a few changes as a test, adding one address on the phone, and one in the address book on the mac, did a 'two way' sync, and again, nothing, both new entries were NOT copied.
The other thing I noticed, is the connections status window goes away after a bit of time on the phone (like it's finished), but the pocket mac software on the Mac is still spinning, acting like it's still syncing, with the status bar near the end, but it never finishes. I have to quit it manually. This did not happen on the 'clean' sync, everything finished like it was supposed to.
This obviously is a drag to not be able to sync without wiping the phones' address book, especially when data has been entered on the phone, and in fact, in that case, there is NO WAY to get it to the computer at this point!
I'm running MAC OS 10.4.11. Brand new sync cable that came in the box with the new phone.
As I said, all software and drivers having to do with pocket mac and blackberry are the latest versions just installed.
Maybe the desktop mngr for mac will solve all this, but, until then?
Thanks in advance for any help!

Hi and welcome to the forums!
KB10489 Data synchronizes from the BlackBerry device to the Macintosh computer, but not the other way.
See if this offers any help
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Connect to Mac from Windows Vista issue

Hi I want to view some files that are on my Mac from my PC (Windows Vista). Here's what I did so far: On my Mac I enabled file sharing, I selected the folders that I want to share.
Now here's the part that confuses me, it asks me to add the users to share the folder with. but do I enter the username and password for my mac or is it the username and password for my PC? What I did was add all the accounts that are on my mac.
I then went on my PC, clicked on network, I can see the mac computer, I can also see my username and folder, I click on it, I then see the drop box but when I click on it I get a network error message that says "Windows cannot access Users public folder drop box".
I don't know what setting I need to enable since I'm very new to this. I can access the files that are on my PC from my Mac just fine. but I can't access the files that are on my Mac from my PC. Do I need to create a new mac account?
I also noticed that when I click on the mac computer from my PC in Network, it doesn't ask me to enter a username and password, could that be the reason I can't connect? Please help.
Message was edited by: Stuart Lawrence

The user names and passwords are the same on both systems. That is not the issue.
The issue is that each user can only connect to the mac from their windows system when they physically log on as user at the mac.
Otherwise it will not even show up in their network neighborhood.
If I boot up the mac and log in as the user, I can connect to the mac from my windows system but the other two users can't.
Likewise if one of them logs in as the user on the mac, I cannot connect to it from my windows system.

Mac Mini Server VPN Issues - Driving me insane

Mac Mini Late 2012
Late 2012
Software OS X 10.8.2 (12C2034)
Server Version 2.2(166)
Previous Issues experiencing: Before i rang apple support and spoke with enterprise support i had no luck at all for weeks getting the VPN connected.
After calling support it seemed to have something to do with my useraccount - Guided through the process of creating new dummy account and trying to connect then. Which sssucceeded..!!!
However. Back on my main account and deleting other user accounts im facing great difficulty setting up a VPN for the purpose of a VPN.
The issue now is: Once i get connected to my mac successfully from my iPhone using the VPN server all is good to go.
However. WHen i restart my computer (For testing purposes this was done) When the MacOS boots up again I have to relog into the Server app. Resign into the program, THen try and reconnect my VPN (WHich will be impossible to do if im out of the country). But it doesnt end there. I keep having to reisue a new Shared Password. FOr testing i Used 1234abcd. Got a good connection - Proceeded with restart and then had to change 12345abcd.
So i have tested this well over 50 times. Trying to find a solution.
In summary: Everytime i use the MAC Mini Server, I have to.
1 Auto login.
2 Repopen the Server.app even though i have enabled it to autostart.
3. Log into the server app (Not another networks Server)
4 Change my shared password
5 Try and reconnect and pray it works.
Whats the quick fix for this. Its driving me insain and honestly making this a 1000$ peice of junk. Its hopeless regarding a server. I want it to be completely operational when i leave the country. My server is designed to Shut on and off between down times (Night Times) when i wake up i jsut want to be able to reconnect via a VPN and no issues, be on my way with life. Not having to wory about remote logging into the PC to then reset up the server.
Any help please!

I sometimes get this same message window or a VPN Not Authorized window after rebooting my server. I have the Mac Mini late-2012 base model running OS X Server. When I do, I just try reconnecting and after no more than 3 attempts a connection is made either by my rMBP or my iPhone5.
I leave my server running 24/7 and I rarely get either of the two messages mentioned above.
You shouldn't need to open the Server.app unless you need to manage services. The Server services you configured should start everytime you restart. I have the Server.app icon on my Dock, but I do not launch it automatically. I manually click to launch it when I need to manage the Server, Accounts or Services.

The old win 7 x64 on a mac pro 1.1 issue - ISO file unreadable/corrupt

Hi all,
Trying to install win 7 x 64 on my mac pro 2,66 xeon 1.1. I knew beforehand there were issues, so I had prepared for them with the instructions given by flickguy here:
http://discussions.apple.com/thread.jspa?threadID=2207855
thing is, the resulting ISO file is unreadable in windows XP, is being seen as corrupt / unable to open by winrar , and the burnt DVD is shown as blank in snow leopard with all the latest updates.
I'm a bit clueless now as i have no idea at all what the problem is. if anyone has found or knows a solution to this, i'd be very grateful.
Thanks!

http://forums.macrumors.com/archive/index.php/t-467704.html
http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
http://sergiomcfly.blogspot.com/2008/04/select-cd-rom-boot-type-when-installing. html
Working from Windows Vista, even in a VM, is one method.
Installing Windows on one drive partition, and from there installing 64bit to another drive partition.

Windows 8 + Mac Mini Late 2012 Issues

I have installed windows 8 succesfully on my mac mini but I cannot use windows update. Everytime it installs updates it says "Update failed" and reverts and reboots. I have not problems with Windows 8 on any other computers in the office except this mac mini. I have reinstalled windows 8 a few times though bootcamp, but it fails each time. Can anyone give me some tips?

Well, arguably bootcamp 5.0.1 does support Widows 7 or higher, there no reference anywhere that it doesn't.
I was able to fix issue by updating driver using intel audio driver. Everything works now...

Mac anyconnect 3.1 issue

Similar Messages

Maybe you are looking for