Mac Error on System.exit(1);

When I close my application, which is exported as runnable jar, using System.exit(1); I get an error.
Mine is in Dutch, but translated it is:
The Java-JAR-file 'file.jar' can't be started.
Check Console for any error messages.
Does anyone recognize this error?

A non-zero return value usually indicates an error.
Maybe Mac OS X takes this to the logical conclusion and shows the error when your app returns a non-zero return value.
Try gimbal2s suggestion and tell us if it changes anything.

Similar Messages

Error on System.exit(0)

Hi everybody.
I'm running an application with JFrames. And everything works fine. But when i'm trying to close the main JFrame and reach the method System.exit(0); i get the next windows error.
instruction on "0x77a7bb99" references to memory on "0x1c553ce0". Memory can't read.
Do you know why i get this kind of error.
I'm using java 1.4.1_01.
Thank u for your time :)

If i upgrade to 1.5 i don't see de Error dialog. But i get an EXCEPTION_ACCESS_VIOLATION:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x77a7bb99, pid=2184, tid=2848
# Java VM: Java HotSpot(TM) Client VM (1.5.0_02-b09 mixed mode, sharing)
# Problematic frame:
# C [ole32.dll+0x2bb99]
--------------- T H R E A D ---------------
Current thread (0x00ac70a8): VMThread [id=2848]
siginfo: ExceptionCode=0xc0000005, reading address 0x0c6c3d80
Registers:
EAX=0x0c6c3d80, EBX=0x0be13714, ECX=0x0be137b8, EDX=0x80000001
ESP=0x02cafc28, EBP=0x02cafc6c, ESI=0x00000000, EDI=0x0be01568
EIP=0x77a7bb99, EFLAGS=0x00010246
Top of Stack: (sp=0x02cafc28)
0x02cafc28: 0c6c3d80 00000001 0be13714 00000000
0x02cafc38: 00000000 0be079e8 0009c320 00000001
0x02cafc48: 0be00ec0 00000000 0009c320 0be05680
0x02cafc58: 00000001 00000001 0009c320 00000001
0x02cafc68: 0000000a 02cafc94 77ab2524 0be13714
0x02cafc78: 0be13710 0be13794 00000000 00000000
0x02cafc88: 00000000 00000001 0be14010 02cafcb4
0x02cafc98: 77ab0550 00000002 0be137b8 0be13710
Instructions: (pc=0x77a7bb99)
0x77a7bb89: 47 14 50 8b 08 ff 51 08 83 67 14 00 8b 47 18 50
0x77a7bb99: 8b 08 ff 51 10 f6 47 04 08 75 14 8b 4b 68 85 c9
Stack: [0x02c70000,0x02cb0000), sp=0x02cafc28, free space=255k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [ole32.dll+0x2bb99]
C [ole32.dll+0x62524]
C [ole32.dll+0x60550]
C [ole32.dll+0x604ad]
C [dpDevClt.dll+0x3044]
C [ntdll.dll+0x30e7]
C [ntdll.dll+0xee02]
C [KERNEL32.DLL+0x269c3]
C [MSVCRT.dll+0x7cd8]
V [jvm.dll+0x117825]
V [jvm.dll+0x1179c5]
V [jvm.dll+0x11775a]
C [MSVCRT.dll+0x85bc]
C [KERNEL32.DLL+0xb388]
VM_Operation (0x0cbaf70c): exit, mode: safepoint, requested by thread 0x030a7e30
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x030c0468 JavaThread "RMI ConnectionExpiration-[IP:1099]" daemon [_thread_blocked, id=2716]
0x030742b0 JavaThread "TimerQueue" daemon [_thread_blocked, id=2820]
0x00286d68 JavaThread "DestroyJavaVM" [_thread_blocked, id=2764]
0x030a7e30 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1772]
0x0306c008 JavaThread "AWT-Shutdown" [_thread_blocked, id=2108]
0x02e4df58 JavaThread "Thread-2" [_thread_in_native, id=2468]
0x03021b70 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=2412]
0x00acdd60 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2636]
0x00acc910 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2704]
0x00ac8d90 JavaThread "Finalizer" daemon [_thread_blocked, id=2856]
0x00a99dc0 JavaThread "Reference Handler" daemon [_thread_blocked, id=2772]
Other Threads:
=>0x00ac70a8 VMThread [id=2848]
VM state:at safepoint (shutting down)
VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x00286300/0x00000b18] Threads_lock - owner thread: 0x00ac70a8
Heap
def new generation total 576K, used 359K [0x22af0000, 0x22b90000, 0x22fd0000)
eden space 512K, 57% used [0x22af0000, 0x22b39c08, 0x22b70000)
from space 64K, 100% used [0x22b70000, 0x22b80000, 0x22b80000)
to space 64K, 0% used [0x22b80000, 0x22b80000, 0x22b90000)
tenured generation total 1408K, used 955K [0x22fd0000, 0x23130000, 0x26af0000)
the space 1408K, 67% used [0x22fd0000, 0x230beea8, 0x230bf000, 0x23130000)
compacting perm gen total 8192K, used 3377K [0x26af0000, 0x272f0000, 0x2aaf0000)
the space 8192K, 41% used [0x26af0000, 0x26e3c510, 0x26e3c600, 0x272f0000)
ro space 8192K, 66% used [0x2aaf0000, 0x2b0488a8, 0x2b048a00, 0x2b2f0000)
rw space 12288K, 46% used [0x2b2f0000, 0x2b884818, 0x2b884a00, 0x2bef0000)
Dynamic libraries:
0x00400000 - 0x0040c000      C:\Archivos de programa\Java\jdk1.5.0_02\bin\java.exe
0x78460000 - 0x784e3000      C:\WINNT\system32\ntdll.dll
0x78ff0000 - 0x79052000      C:\WINNT\system32\ADVAPI32.dll
0x79450000 - 0x7950d000      C:\WINNT\system32\KERNEL32.DLL
0x77120000 - 0x77191000      C:\WINNT\system32\RPCRT4.DLL
0x78000000 - 0x78045000      C:\WINNT\system32\MSVCRT.dll
0x6d6b0000 - 0x6d835000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\client\jvm.dll
0x77e10000 - 0x77e6f000      C:\WINNT\system32\USER32.dll
0x77f40000 - 0x77f7b000      C:\WINNT\system32\GDI32.dll
0x77550000 - 0x77581000      C:\WINNT\system32\WINMM.dll
0x6d2f0000 - 0x6d2f8000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\hpi.dll
0x68f70000 - 0x68f7b000      C:\WINNT\system32\PSAPI.DLL
0x6d680000 - 0x6d68c000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\verify.dll
0x6d370000 - 0x6d38d000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\java.dll
0x6d6a0000 - 0x6d6af000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\zip.dll
0x6d070000 - 0x6d1d6000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\awt.dll
0x77800000 - 0x7781e000      C:\WINNT\system32\WINSPOOL.DRV
0x79520000 - 0x79530000      C:\WINNT\system32\MPR.DLL
0x75e30000 - 0x75e4a000      C:\WINNT\system32\IMM32.dll
0x77a50000 - 0x77b3f000      C:\WINNT\system32\ole32.dll
0x727a0000 - 0x727e6000      C:\WINNT\system32\ddraw.dll
0x72840000 - 0x72846000      C:\WINNT\system32\DCIMAN32.dll
0x72c90000 - 0x72d24000      C:\WINNT\system32\D3DIM700.DLL
0x77590000 - 0x777db000      C:\WINNT\system32\shell32.dll
0x70bd0000 - 0x70c35000      C:\WINNT\system32\SHLWAPI.dll
0x71710000 - 0x71794000      C:\WINNT\system32\COMCTL32.dll
0x6d2b0000 - 0x6d2ed000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\fontmanager.dll
0x6d530000 - 0x6d543000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\net.dll
0x74fe0000 - 0x74ff4000      C:\WINNT\system32\WS2_32.dll
0x74fd0000 - 0x74fd8000      C:\WINNT\system32\WS2HELP.DLL
0x6d550000 - 0x6d559000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\nio.dll
0x10000000 - 0x10011000      C:\mobileclient\bin\oljdbc40.dll
0x03540000 - 0x035cc000      C:\mobileclient\bin\olobj40.dll
0x035d0000 - 0x035de000      C:\mobileclient\bin\olaes.dll
0x035e0000 - 0x0360c000      C:\mobileclient\bin\olStdDll.dll
0x75000000 - 0x75009000      C:\WINNT\system32\WSOCK32.dll
0x70200000 - 0x70296000      C:\WINNT\system32\WININET.dll
0x79640000 - 0x796c7000      C:\WINNT\system32\CRYPT32.dll
0x77410000 - 0x77420000      C:\WINNT\system32\MSASN1.DLL
0x779b0000 - 0x77a4b000      C:\WINNT\system32\OLEAUT32.dll
0x780c0000 - 0x78121000      C:\WINNT\system32\MSVCP60.dll
0x0ba30000 - 0x0ba3b000      C:\mobileclient\bin\olil125x.dll
0x0ba40000 - 0x0ba68000      C:\mobileclient\bin\olod2040.dll
0x0ba70000 - 0x0baeb000      C:\mobileclient\bin\olsql40.dll
0x0bb30000 - 0x0bb48000      C:\WINNT\system32\VFJavaW42.dll
0x0bb50000 - 0x0bbc0000      C:\WINNT\system32\VFinger.dll
0x75120000 - 0x7516f000      C:\WINNT\system32\NETAPI32.dll
0x790d0000 - 0x790df000      C:\WINNT\system32\Secur32.dll
0x77bf0000 - 0x77c01000      C:\WINNT\system32\NTDSAPI.dll
0x77980000 - 0x779a4000      C:\WINNT\system32\DNSAPI.DLL
0x77950000 - 0x7797b000      C:\WINNT\system32\WLDAP32.DLL
0x75170000 - 0x75176000      C:\WINNT\system32\NETRAP.dll
0x75100000 - 0x7510f000      C:\WINNT\system32\SAMLIB.dll
0x65440000 - 0x65447000      C:\WINNT\system32\wtsapi32.dll
0x664d0000 - 0x664da000      C:\WINNT\system32\UTILDLL.dll
0x77510000 - 0x77532000      C:\WINNT\system32\TAPI32.dll
0x783c0000 - 0x78451000      C:\WINNT\system32\SETUPAPI.dll
0x78df0000 - 0x78e52000      C:\WINNT\system32\USERENV.DLL
0x655e0000 - 0x655ed000      C:\WINNT\system32\WINSTA.dll
0x68950000 - 0x6895b000      C:\WINNT\system32\REGAPI.dll
0x77300000 - 0x77317000      C:\WINNT\system32\MPRAPI.dll
0x77390000 - 0x773bf000      C:\WINNT\system32\ACTIVEDS.DLL
0x77360000 - 0x77383000      C:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783e000      C:\WINNT\system32\RTUTILS.DLL
0x0bc70000 - 0x0bc84000      C:\WINNT\system32\SMJavaW.dll
0x0bc90000 - 0x0bca3000      C:\WINNT\system32\ssl.DLL
0x0bcd0000 - 0x0bce7000      C:\WINNT\system32\sslBiometrika.dll
0x0bd00000 - 0x0bd1e000      C:\WINNT\system32\fx3scan.dll
0x0bd30000 - 0x0bd91000      C:\WINNT\system32\fx3.dll
0x77820000 - 0x77827000      C:\WINNT\system32\VERSION.dll
0x75980000 - 0x75986000      C:\WINNT\system32\LZ32.DLL
0x0beb0000 - 0x0bec9000      C:\WINNT\system32\sslFile.dll
0x76b10000 - 0x76b4e000      C:\WINNT\system32\comdlg32.dll
0x0bee0000 - 0x0bef7000      C:\WINNT\system32\sslST.dll
0x0bf10000 - 0x0bf5d000      C:\WINNT\system32\tci.dll
0x0bf70000 - 0x0bf89000      C:\WINNT\system32\sslUareU.dll
0x0bfa0000 - 0x0bfba000      C:\WINNT\system32\dpFpFns.dll
0x0bfc0000 - 0x0bfca000      C:\WINNT\system32\dpDevDat.dll
0x0bfd0000 - 0x0bff3000      C:\WINNT\system32\dpDevClt.dll
0x0c000000 - 0x0c071000      C:\WINNT\system32\dpFtrEx.dll
0x0c080000 - 0x0c0db000      C:\WINNT\system32\dpMatch.dll
0x0c560000 - 0x0c5f0000      C:\WINNT\system32\CLBCATQ.DLL
0x0c680000 - 0x0c6be000      C:\Archivos de programa\DigitalPersona\Bin\DPPS.dll
0x7ca00000 - 0x7ca23000      C:\WINNT\system32\rsabase.dll
0x0c6d0000 - 0x0c6f3000      C:\WINNT\system32\rsaenh.dll
0x0c700000 - 0x0c904000      C:\WINNT\system32\msi.dll
0x74f80000 - 0x74f9e000      C:\WINNT\system32\msafd.dll
0x74fc0000 - 0x74fc7000      C:\WINNT\System32\wshtcpip.dll
0x77840000 - 0x7784c000      C:\WINNT\System32\rnr20.dll
0x77320000 - 0x77333000      C:\WINNT\system32\iphlpapi.dll
0x77500000 - 0x77505000      C:\WINNT\system32\ICMP.DLL
0x774c0000 - 0x774f3000      C:\WINNT\system32\RASAPI32.DLL
0x774a0000 - 0x774b1000      C:\WINNT\system32\RASMAN.DLL
0x77340000 - 0x77359000      C:\WINNT\system32\DHCPCSVC.DLL
0x777e0000 - 0x777e8000      C:\WINNT\System32\winrnr.dll
0x777f0000 - 0x777f5000      C:\WINNT\system32\rasadhlp.dll
0x6d660000 - 0x6d666000      C:\Archivos de programa\Java\jdk1.5.0_02\jre\bin\rmi.dll
VM Arguments:
java_command:
Environment Variables:
CLASSPATH=C:\mobileclient\bin\msync.jar;C:\codigos\almacen\classes;C:\mobileclient\bin\olite40.jar;C:\mobileclient\bin\webtogo.jar
PATH=c:\j2sdk1.4.1_01\bin\;;C:\mobileclient\bin;C:\oracle\ora92\bin;C:\Archivos de programa\Oracle\jre\1.3.1\bin;C:\Archivos de programa\Oracle\jre\1.1.8\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Archivos de programa\Symantec\pcAnywhere\;c:\winnt;c:\winnt\respair;c:\grupotelnet\classes;c:\grupotelnet;c:\GrupoTelnet\comandera;c:\GrupoTelnet\comandera\config;c:\j2sdk1.4._01\bin;C:\WINNT\system32;c:\grupotelnet\classes;c:\GrupoTelnet;C:\mobileclient\bin
USERNAME=Administrador
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 1 Stepping 3, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows 2000 Build 2195 Service Pack 4
CPU:total 1 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 515568k(63456k free), swap 876852k(302676k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_02-b09) for windows-x86, built on Mar 4 2005 01:53:53 by "java_re" with MS VC++ 6.0

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

attach a screenshot of the error message.

System.exit(0)   error in program.

Any help appreciated. Let me first put my code here:
Converts money using CurrencyConverter, there's another class I haven't posted here!! (which calculates conversion)
import java.util.* ;
public class CurrencyConverterTester
public static void main(String[] args)
    Scanner in = new Scanner(System.in) ;
    System.out.println("How many euros is one dollar?") ;
    String input = in.nextLine() ;
    double rate = Double.parseDouble(input) ;
    CurrencyConverter myconverter = new CurrencyConverter(rate);
    System.out.println("Dollar value (Q to quit)") ;
    input = in.nextLine() ;
    while (true) {
      if (input == "Q"){
        System.exit(0);
        break;}
      else {
      System.out.println(input + " dollar = " + myconverter.convert(Double.parseDouble(input)) + " euros");
      input = in.nextLine();
      continue;}
}The issue is that the program won't terminate when I enter Q as my input?? I'm guessing it might have something to do my conversion from string to double in the 'else' statement, but not sure. Also, if you can suggest a more simpler method for the last 'while' statement, that would be helpful as well. Thanks. (noob to java)

paulcw wrote:
Curse Gosling for making + syntactic sugar for string append, but not overloading any other operators.@Paul
What did you expect from a duck ;-)
Seriously, yep, maybe it would have been better for noobs if the syntax of Java Strings was consistent with other kinds of Object... or maybe it would have been better if == was compiler-magiced into stringA.equals(stringB)... and the left and right shift operators have promise, and of course that way lies MADNESS, as witnessed in C++ ;-)
@OP... You are (IMHO) using the break, continue and especially System.exit() inappropriately... see my comments in your code...
    System.out.println("Dollar value (Q to quit)") ;
    input = in.nextLine() ;
    // while-true-loops are a "fairly usual" way of doing this kind of stuff,
    // but that doesn't make them "the preferred option". Typically you would
    // explore more "vanilla approaches" (which don't rely on the break and
    // continue statements)... leaping straight to the "tricky approach" means
    // you haven't (most often out of sheer laziness) thought it through... and
    // ALL good computer programs are thoroughly thought through (yep, try
    // saying that three times fast, especially after three beers).
    while (true) {
      // You don't compare Strings using ==
      if ( "Q".equalsIgnoreCase(input) ) {
        // Either of the following statements will do the job. The call to exit
        // will exit the JVM, therfore the break statement cannot be reached,
        // so it is superflous, so it's presence is just a bit confusing. Having
        // said that, "real programmers" don't use System.exe routinely, only in
        // the case of an emergency, such as handling a fatal-error, such as an
        // out-of-memory condition... an even then it's usually indicative of a
        // poor "system design", because it terminates the JVM which is running
        // this program without giving anything else in the program a chance to
        // clean-up after itself... like ask the user if they want to save there
        // work, or whatever.
        // I would use break (if anything) instead of System.exit
        // ... and if I wrote the Java tutorials, exit wouldn't be mentioned at
        // all until both "normal" flow control, and exception handling had both
        // been thoroughly covered.
        System.exit(0);
        break;
      } else {
        // I would break this line up, probably into three lines, simply becuase
        // it's syntatically "a long line".
        // Also the name "myconverter" doesn't tell what the class is/does.
        // IMHO, currencyConverter would be a better (more meaningful) name.
        // HERE'S HOW I WOULD WRITE IT
        // double dollars = Double.parseDouble(input);
        // double euros = currencyConverter.convert(dollars);
        // System.out.println(input + " dollar = " + euros + " euros");
        System.out.println(input + " dollar = " + myconverter.convert(Double.parseDouble(input)) + " euros");
        input = in.nextLine();
        // This continue statement is superflous. continue says "go back to the
        // top of loop, reevaluate the loop-condition (true in this case) and
        // (if the condition is still true) "Play it again Sam".
        // ... which is exactly what will happen without this continue statement
        // and hence (IMHO) your code is easier to follow without it, simply
        // because another programmer may waste there time trying to figure out
        // WHY that continue statement is present.
        continue;
    }*ALSO:* The format of that code totally sucks. Braces all over the place; improper indentation. No wonder you're struggling to read your own code. Please read and abide the [The Java Code Conventions|http://java.sun.com/docs/codeconv/] (at least until you have the requisite experience to formulate credible and compelling arguments as to why your "style" is superior to the standard, and that's no small ask). Yes this is *important*... trust me on this (for now)... especially if you are going to ask for help on the forums... You're effectively wasting our time asking us to decipher your code because you are too lasy to format it correctly... and I for one find that "self entitled" attitude ugly, and offensive... Help us help you... you know?
And BTW.... Here's how I would actually do it.... no funky while-true, break, or continue... just a plain-ole'-while-woop....
package forums;
import java.util.Scanner;
public class KRC
private static final Scanner SCANNER = new Scanner(System.in);
public static void main(String[] args) {
    try {
      String input = null;
      while ( !"Q".equalsIgnoreCase(input=enterDollarAmount()) ) {
        System.out.println(input + " dollars is " + Double.parseDouble(input) + " euros.");
        System.out.println();
    } catch (Exception e) {
      e.printStackTrace();
private static String enterDollarAmount() {
    System.out.print("Please enter an amount in dollars : ");
    return SCANNER.nextLine();
}Edited by: corlettk on 25/10/2009 10:21 ~~ Distant Monarching Forum Markup!

Error in XMLDiff Bean, System.exit() is being called in setFiles() ?

When I call the setFiles() method in XMLDiff and the files contain dtd references, my application will shut down competely as though System.exit() is being called from within the XMLDiff bean. I have tested this with the XMLDiff demo and it also shut down when a dtd reference was in the files.

The version of XDK is 9.2.0.2.0
The test case is the "family.xml" in the demo\java\parser\common directory using the XMLDiffSample application. What I did was to try to compare the family.xml against itself. When I do that it shuts down the demo application as though System.exit() has been called.
Setting the standalone="yes" did in fact cause it to work properly, but I am not sure why?

Transports while importing DS error "Source system QAS does not exit "

Hi Experts,
 For a specific reason we are importing a DS from quality to development.While importing DS in Development side we are getting an error " Source system QAS does not exist".Error message as below:
 Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
 Source system QAS does not exist
 Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
 There is no DataSource with these attributes
 Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
 Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
 Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
 Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
 Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
 Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
 The errors affect the following components:
 BW-WHM (Warehouse Management)
 Post-import methods of change/transport request CXCK900023 completed
 Start of subsequent processing ... 20090306024549
 End of subsequent processing... 20090306024550
 Execute reports for change/transport request: CXCK900023
 Reports for change/transport request CXCK900023 have been executed
 Start of................ 20090306024550
 End of.................. 20090306024550
 Execution of programs after import (XPRA)
 End date and time : 20090306024550
 Ended with return code: ===> 8 <===
Our system sap bi is not new system, we are using from long time.Transports are working while moving dev to quality and quality to prod.
Can any body suggest on this.
Regards
Vinod

Hi vinod kumar,
i hope you need to map source system From QAS to DEV system,
genereally from DEV to QAS configuration will be there, but here request is moving from QAS to DEV so i think this should be configured.
RSA1-> Tools -> conversion of logical system names -> maintain original system and target system name for both BI and ECC systems.
Regards
Daya Sagar

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 3 warning(s)
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
Suggestions? thanks.

Issue resolved with the help of Adobe Support (Mercer). My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
My fix was to delete the following empty folders from the Fonts Folder:
AdobeMingStd-Light.otf
BickhamScriptPro-Regular.otf
KozMinPro-Regular.otf
MyriadPro-BoldCond.otf
TektonPro-BoldCond.otf
And then re-run the installer (be sure to empty the trash).
My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those. Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

Errors in system.log since leopard upgrade

I have a mac mini core duo 1.83, with 2gb ram.
It was running Tiger until I upgraded it to Leopard about October 27th.
I used the archive and install installation method.
It has been running fine. The only "glitch" I have noticed is a very occasional
pause in music playing in iTunes.
While investigating the cause of that, I realised that the system.log file is very large, and there are many many instances of this error in it.
Dec 10 15:42:11 macmini Unknown[36394]: Error loading /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/Co ntents/MacOS/IOUSBLib: dlopen(/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bu ndle/Contents/MacOS/IOUSBLib, 262): no suitable image found. Did find:\n /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/Co ntents/MacOS/IOUSBLib: mach-o, but wrong architecture
Dec 10 15:42:11 macmini Unknown[36394]: Cannot find function pointer IOUSBLibFactory for factory 4547A8AA-9EF3-11D4-A9BD-000A27052861 in CFBundle/CFPlugIn 0x262580 </System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle> (bundle, not loaded)
The latest log file is over 500mb
-rw-r----- 1 root admin 607343865 Dec 10 15:49 system.log
Also I see these errors
Dec 10 15:50:01 macmini com.apple.launchd[1] (org.postfix.master): Throttling respawn: Will start in 9 seconds
Dec 10 15:50:10 macmini postfix/master[67855]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable
Dec 10 15:50:11 macmini com.apple.launchd[1] (org.postfix.master[67855]): Exited with exit code: 1
Dec 10 15:50:11 macmini com.apple.launchd[1] (org.postfix.master): Throttling respawn: Will start in 9 seconds
Am I likely to see any problems other than the large log files?

Large log files are potential problems. The larger they get the greater the probability they will become corrupted. You should use some software to clear out the logs regularly by running the built-in Unix scripts. See my maintenance FAQ for helpful suggestions:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
I'm only supposing, here, but I think your log errors are generated by left over elements of Tiger not removed when you installed Leopard. This is always a potential problem with upgrade installs and Archive and Install when moving to a new major OS version. I generally recommend doing an Erase and Install.

Java 1.5_09 vs Java 1.4.2_11 and System.exit

The java program tries to access a url, if cannot it returns 129
* <pre>
* 0 - Successful connection
* 129 - Network connection failure, or no connection.
* 130 - Connected to server, but received HTTP error.
* </pre>
Here is the code snippet
status = status == -1? 129 : 130;
System.exit(status);
if I compile the class under 1.4.2_11 I get back 129. If I compile the class under 1.5_09 I get back -107374189
This causes my bat file errorlevel check to fail. Any ideas ?

Hello nudli and Welcome to Apple Discussions ..
In laymans terms, Java SE consists of a virtual machine, which must be used to run Java programs, together with a set of libraries (or packages) needed to allow the use of file systems, networks, graphical interfaces, and so on, from within those programs. Java works quietly in the background.
First, run the Software Updater to see if you have all available updates. Click the Apple logo top left in your Desktop then click Software Update ... the update window will open and populate a list of updates you might need. Just follow the instructions to install them. If the Software Updater didn't find any needed Java files, then you are up to date. Most times after an install you need to Restart. AND, it's always good to run Disk Utility located here: Applications/Disk Utilities and Repair Disk Permissions every time you update software on your Mac.
Go to this link to see minimum requirements needed to upgrade to Leopard 10.5:
http://www.apple.com/macosx/techspecs/
Carolyn

I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

BAPI_GOODSMVT_CREATE ERROR: A System Error Has Occurred While Locking

Hi All,
I am having a problem with a Z program that I am writing.
Basically, it uses the BAPI mentioned in the title. The program will read excel file that is being uploaded, and then will segregate the line items by 200 lines.
That means, if I were to upload 1000 line items, the BAPI will be called and executed 5 times (1000/200 = 5).
However, when trying to upload 10000 line items, I received this error after around 3000 line items.
"A system error has occurred while locking".
This happens when IMPORT parameter TEST_RUN is set to 'X'.
I found this after some googling: http://sap.ittoolbox.com/groups/technical-functional/sap-basis/lock-entry-system-error-1674434
I am hoping for your expert thoughts on this.
Thank you.

BAPI TO Upload Inventory Data
* GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
* 02 - MB31 - Goods Receipts for Prod Order
* 03 - MB1A - Goods Issue
* 04 - MB1B - Transfer Posting
* 05 - MB1C - Enter Other Goods Receipt
* 06 - MB11
* Domain: KZBEW - Movement Indicator
* Goods movement w/o reference
* B - Goods movement for purchase order
* F - Goods movement for production order
* L - Goods movement for delivery note
* K - Goods movement for kanban requirement (WM - internal only)
* O - Subsequent adjustment of "material-provided" consumption
* W - Subsequent adjustment of proportion/product unit material
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
 'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
 'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
 include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
 include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
 include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
 include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
 include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
 errflag.
data: begin of pcitab occurs 100,
 ext_doc(10), "External Document Number
 mvt_type(3), "Movement Type
 doc_date(8), "Document Date
 post_date(8), "Posting Date
 plant(4), "Plant
 material(18), "Material Number
 qty(13), "Quantity
 recv_loc(4), "Receiving Location
 issue_loc(4), "Issuing Location
 pur_doc(10), "Purchase Document No
 po_item(3), "Purchase Document Item No
 del_no(10), "Delivery Purchase Order Number
 del_item(3), "Delivery Item
 prod_doc(10), "Production Document No
 scrap_reason(10), "Scrap Reason
 upd_sta(1), "Update Status
 end of pcitab.
call function 'WS_UPLOAD'
exporting
 filename = p-file
 filetype = 'DAT'
* IMPORTING
* FILELENGTH =
tables
 data_tab = pcitab
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* OTHERS = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'. "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind = 'B'.
itab-plant = pcitab-plant.
itab-material = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
 itab-move_type, itab-entry_qnt, itab-entry_uom,
 itab-entry_uom_iso, itab-po_number, itab-po_item,
 pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
 goodsmvt_header = gmhead
 goodsmvt_code = gmcode
* TESTRUN = ' '
* IMPORTING
 goodsmvt_headret = mthead
* MATERIALDOCUMENT =
* MATDOCUMENTYEAR =
tables
 goodsmvt_item = itab
* GOODSMVT_SERIALNUMBER =
 return = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
 write:/'Error in function', errmsg-message.
 errflag = 'X'.
else.
 write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
 write:/ 'Error in updating'.
 exit.
else.
 write:/ mthead-mat_doc, mthead-doc_year.
 perform upd_sta.
endif.
endif.
* FORM UPD_STA *
form upd_sta.
loop at pcitab.
 pcitab-upd_sta = 'X'.
 modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
 exporting
 filename = p-file
 filetype = 'DAT'
* IMPORTING
* FILELENGTH =
 tables
 data_tab = pcitab
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* OTHERS = 6
endform.
Code Formatted by: Alvaro Tejada Galindo on Dec 26, 2008 10:20 AM

ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)

Hi Experts I´m facing this issue.
This is tp version 340.16.41 (release 640)
HALT 20091029110915
ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)
ERROR: EXIT(16) -> process ID is: 9660
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0233
standard output from tp and from tools called by tp:
Any Clue?

Hi,
Was the system copied from another system? Or is this a new installation?
If yes, did you run SE06 after the installation?
What is the results of trans.log (generated from R3trans -d)?
Also paste the contents of table TADIR in SE16.
Best regards,
Warren

The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL

Hi
We are using SRM 5.0. We are facing a strange problem. We are able to see the initial screen of SRM EBP in the browser. But once the user name and password are provided the system goes for a dump with the following error:
The following error text was processed in the system SS0 : System error
The error occurred on the application server <Server Name> and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was: SYSTEM-EXIT of program BBPGLOBAL
SM21 Log:
Short Text
 Transaction Canceled &9&9&5 ( &a &b &c &d &e &f &g &h &i )
 The transaction has been terminated. This may be caused by a
 termination message from the application (MESSAGE Axxx) or by an error
 detected by the SAP System due to which it makes no sense to proceed
 with the transaction. The actual reason for the termination is
 indicated by the T100 message and the parameters.
Transaction Canceled ITS_P 001 ( )
Message Id: ITS_P
Message No: 001
I just checked these threads but did not help much,
RABAX_STATE error after loggin into BBPSTART service in SRM 4.
ITS_TEMPLATE_NOT_FOUND error
Besides I tried this note: 790727 as well, still I get the same error.
Any help would be highly appreciated.
Thanks in advance
Kathirvel Balakrishnan

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Default host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transaction server-->test service/Publish. (BBPSTART , BBPGLOBAL etc)
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (Transaction - SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Is System.exit() a good call to use?

I have a program that checks for updates in the db. If there are no updates in the database I want the program to stop. There are also many other conditions that would cause the program to stop. None of them are "Errors" so I wasn't using Exceptions to end the program The program runs from a command line or from chron job. Is it safe / OK to use System.exit() to do this?

As you describe it, I'd say yes. System.exit() is the way to end your program.
The danger of System.exit() is if a class you write will be reused in some other system. In that case, System.exit() could be entirely inappropriate in that context, thus preventing your class from being reusable.
If you only call System.exit() in your main() method, you'll probably be OK.

Oracle R12 Installation Error - Validate System Configuration

Hello,
I was doing the oracle apps R12 installation and got this error
=======================
Validate System Configuration
The post-install check inspects your system for a complete installation.
The list below shows the tests that were performed and the results.
Click on the test icon for details.
One or more of the post-install tests did not succeed for this:
Database Availability
HTTP
Virtual Directory
Login page
Configuration Upload
Help page
JSP
=======================
I’ve checked the details which are listed below.
Please help me in solving the issue :(
Configuration Upload
uploading config file at /u05/oracle/TEST/db/tech_st/11.1.0/appsutil/conf_TEST.txt
Failed upload of config file at /db/tech_st/11.1.0/appsutil/conf_TEST.txt
Database Availability
command: su dbuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:42:59 IST 2012
Parameters passed are : /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u05/oracle/TEST/db/tech_st/11.1.0/perl/bin:/u05/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u05/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin:.
LD_LIBRARY_PATH : /u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/u05/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /u05/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 3
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su appsuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:43:16 IST 2012
Parameters passed are : /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/appl/TEST/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : TEST
PATH : /u05/appl/TEST/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/u05/appl/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin
LD_LIBRARY_PATH : /u05/appl/TEST/apps/tech_st/10.1.2/lib32:/u05/appl/TEST/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u05/appl/TEST/apps/apps_st/appl/sht/12.0.0/lib
Executable : /u05/appl/TEST/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
Help Page
checking URL = http://erp.tez.co.in:8009/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
HTTP
checking URL = http://erp.tez.co.in:8009
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.tez.co.in:8009/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Hi,
I think my linux was corrupted :(
I've done fresh linux installation and after that the R12 installation is complete without any issues :D
Thanks for you help Hussein Sir

Mac Error on System.exit(1);

Similar Messages

Maybe you are looking for