Mac Mini - Two VGA Monitors

Can I connect two VGA monitors to a Mac Mini. I have one concerted via thunder port and have tried another via HDMI convertor but can't get it to work.
I have a Late 2012 Mac Mini 4GB 2.5GHZ Intel i5 - OSX 10.9.3 software

Only by using a USB video adapter like this one:
http://www.ebay.com/itm/390717555128?redirect=mobile
As you found out the HDMI port only outputs digital video and VGA is analogue
Yo might also be able to find a video converter that will convert digital to VGA analog. No cheap

Similar Messages

  • Mac Mini - 2 VGA monitors

    I am interested in purchasing a new Mac Mini to use with my two VGA monitors.  I understand that one monitor can come out of the thunderbolt port with a converter cable; no problem.  Can the other one come out of the HDMI port?  If so, what cables are needed?

    There are two video out ports on the back of the mini. You use each one to drive one monitor. 
    (driving two monitors off of one port is a whole other topic) 
    One is mini - displayport. That's where the mini displayport to VGA dongle would go. Then connect through with the VGA cable to monitor 1. 
    See example: http://store.apple.com/us/product/MB572Z/A   Other manufacturers have this as well, for less and should be compatible. (monoprice, check the reviews )
    Two is the HDMI port. That's where you need to go from HDMI to VGA with a convertor box.Then connect through with a VGA cable to monitor 2.
    I do need to mention that I wasn't aware that that Apple includes a HDMI to DVI adapter actually with the system * .  So if you were to use Apple's adapter you can use a DVI to VGA CONVERTOR actually. (instead of the HDMI to VGA CONVERTOR I said earlier)  So you have two options. It probably costs about the same. Personally I'd probably keep it simple and not use the DVI dongle. Switching connectors and converting there is always a higher risk of some incompatibility.
    Hope that helps
    * http://www.apple.com/macmini/specs.html
    Thunderbolt port with support for up to 2560-by-1600 resolution
    HDMI port with support for up to 1920-by-1200 resolution
    DVI output using HDMI to DVI Adapter (included)
    Support for dual display and video mirroring

  • How to get two vga monitors on a mac mini 2012

    Hi Guys,
    please forgive any ignorance that follows. I am a new convert from a PC and have bought a Mac Mini 2012. I want to be able to use a monitor that I can see my music programme but run a second monitor that will allow me to display visuals from a VJ programme. Here is my journey.
    I bought the mac mini and the thunderbolt to vga adapter. Generic VGA monitor - worked a treat. I then wanted to run a second generic vga monitor form the hdmi port. After a lot research I chose an adapter for £15 that one of the reviews said worked perfectly for a mac mini and VGA. Bought it form Amazon. Didn't work - no signal etc - refund. Then I thought I would buy a monitor / DVD with a HDMI cable and do hdmi to hdmi and use that as the music monitor and use the thunderbolt port for the projector and VJ programme. Bought one from Asda. Plugged in great picture etc worked a treat but got a ground hum from new HDMI monitor. More research and realised that ground hum was a nightmare. HDMI monitor back and refund.
    It is doing my head in.
    I will be a happier man if someone could say that they have a mac mini 2012 and they bought this HDMI VGA converter and use a generic vga monitor and it works a treat. There is only so much stuff I can return before my lick runs out.
    I don't think I'm asking for much.
    Any help would be gratefully received.
    Cheers Pete

    Sorry, but I can not safely suggest a digital HDMI to analog VGA converter or if any would even work with the Mac Mini because I do not have and have not personally tested any.
    I can only suggest that instead of dropping more money into adapters or an HDMI to VGA converter, that perhaps' you should consider replacing one if not both with a more modern digital monitor that support either HDMI and/or DVI.

  • Two vga monitors

    Is there a preferred way of conecting two VGA monitors to a Mini? All the other discussions I've seen outside of the apple fourms are "advice" from folks who don't even own a Mini let alone have successfully hooked up two VGAs.
    Thank You  -W

    I have no Mini also, but one way...
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
    Some have compaid about speed/refreh rate though.

  • Can I connect Mac mini to iMac monitor

    Can I connect a Mac mini to iMac monitor ? To view Mac mini files

    Hi Ricemail,
    You *may* be able to do so, depending on the specific models of your iMac and Mac Mini, using a feature known as Target Display Mode. You may find the following article helpful:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Regards,
    - Brenden

  • Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

  • I'd like to project what's on my Mac Mini with Samsung monitor to my standard definition Samsung TV via WIFI.  What HDM1 dongle should I buy?

    I'd like to project what's on my Mac Mini (with Samsung monitor) to my Samsung TV (standard definition) via my WIFI.  What HDM1 dongle should I buy?

    lyndafromorwell wrote:
    I'd like to project what's on my Mac Mini (with Samsung monitor) to my Samsung TV (standard definition) via my WIFI.  What HDM1 dongle should I buy?
    You can in fact buy what you want, no need to go with Apple TV
    To connect (wirelessly) your Mac to the HDMI on the TV:
    They range from $100 on up.

  • My 2012 i7 mac mini thinks my monitor is a tv.

    my 2012 i7 mac mini thinks my monitor is a tv and also all the colors are messed up and the resultion looks wrong, is this my mac mini or my monitor causing this problem? .
    ps sorry for spelling
    Intel HD Graphics 4000:
      Chipset Model:          Intel HD Graphics 4000
      Type:          GPU
      Bus:          Built-In
      VRAM (Total):          512 MB
      Vendor:          Intel (0x8086)
      Device ID:          0x0166
      Revision ID:          0x0009
      Displays:
    E2251:
      Resolution:          1920 x 1080 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          202LTZL1K517
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Television:          Yes

    I have a Mac Mini late-2012 and a Dell monitor (E228WFP). I'm using the Apple supplied HDMI->DVI adapter and a DVI cable to the monitor. No picture issues here. Everything is fine.
    Intel HD Graphics 4000:
      Chipset Model:          Intel HD Graphics 4000
      Type:          GPU
      Bus:          Built-In
      VRAM (Total):          512 MB
      Vendor:          Intel (0x8086)
      Device ID:          0x0166
      Revision ID:          0x0009
      Displays:
    DELL E228WFP:
      Resolution:          1680 x 1050 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          KU31179E2MDL
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported

  • Mac mini+hp w2216 monitor (DVI)= problems!

    The strangest thing happened when I moved my Mac mini (G4, 1.42 GHz) from an Apple Cinema Display (no problems) to a new HP w2216 (1680x1050 wide screen monitor). I connected with a DVI cable. At first, it worked. But after a while, artifacts started to develop, especially when moving windows around, until finally the monitor would not pick a signal. Brought monitor back to the store, where it worked flawlessly when connected to a PC using the same DVI cable. Monitor works fine with analog VGA cable!
    Artifacts looked similar to those shown here: http://www.freewebs.com/themagius/minidvipics.htm, so it seems this is some incompatibility between the graphics card of the mini and the HP display. Any other idea how to fix this?

    The old G4 mini has trouble with monitors that have something called a non-coherent TMDS (DVI) receiver. The solution is to use SwitchRes X and build a custom resolution using the CVT-RB setting under the "Use simplified settings" option in the custom timing set up window. This causes the pixel clock to lower to a value where the coherency/non-coherency matter is not an issue. Here are more specific instructions for using SwitchRes X once you have downloaded and installed it. By the way, download and install the lighter version of the program instead of the full version. The lighter version is called SwitchRes X Control Panel.
    Open SwitchRes X and click on the Custom tab. Click the "+" to start a new timing. A window will open with a checkbox near the lower left that says, "Use simplified settings". Check the box and then, in the associated pop-up, select "CVT-RB". RB stands for reduced blanking and it will cause the pixel clock to lower. Enter "1680" for Horizontal Active, "1050" for Vertical Active and "60" for Vertcal Scan rate. Those are the only three boxes you can fill in. The built-in calculator fills in the remaining values. Then follow the directions for saving and restarting. Now in Displays Preferences should be two 1680 x 1050 timings. One is the standard one and one is the custom one you just built. You may not be able to tell which is which so you'll have to try both. One of them should be stable.

  • Adapter for Mac mini to VGA - port with "legs"?

    Hi there,
    I'm planning on buying a mini for my parents (current Windows XP users). They have a perfectly good VGA monitor they want to keep. My question is: which port on the mini will be around longer? Is the mini display port likely to become a standard on macs from here on out? Or is it a better idea to get an adapter that is mini-DVI to VGA?
    thanks for any thoughts, Len

    Welcome to Apple Discussions!
    Speculation is strictly forbidden. Read about new Macs and what to do about them:
    http://discussions.apple.com/thread.jspa?threadID=1502615&tstart=0
    The DisplayPort makes it difficult to view certain protected video. DVI does not have that difficulty. One would hope that these issues would be overcome with DisplayPort before it becomes the defacto standard, but if it doesn't users are likely to demand DVI to stick around longer. So I would not want to speculate as to the emergence of one technology over another. It really depends on the education of the user, and their demands for something different or to stay with the same.

  • What cable do I need for a mac mini with this monitor

    I want a mac mini for christmas, I have a monitor but it only supports VGA, so what cable do i need to get a mac mini up and running on this monitor
    Thanks

    You will need the mini-DisplayPort to VGA adapter cable, here.

  • Two VGA monitors don't work with two different G4s, but both work with G3!

    I recently acquired two used Power Mac G4s (one of them is a mirrored-door dual-processor that I got from school and was told should work, the other is a Gigabit Ethernet model, and should also work), from two completely different sources. They both turn on (I get a power-on light, I hear HDDs churning, and I get a power chime from one of them, and they react to the usual Mac stimuli, mouse and keyboard light up, reset button works, etc.) but I get *absolutely no video*. The monitor syncs for a second, like it gets a quick signal, then goes immediately back to the "CHECK SIGNAL CABLE" message.
    I have tried them both with two generic PC VGA monitors (though they were both kind of old and crummy ones, they work on my G3 and other computers. I've tried the working PCI video card from my G3, that doesn't work, nor does swapping their video cards. They both have Apple-supplied ATI AGP video cards, both with Apple's proprietary ADC interface, though one has only DVI out (with a DVI to VGA adapter that came with it) and the other has a straight VGA port.
    The weird thing is that, even though these computers have never, er, met before, they have the exact same problem. The only thing these things have in common is the monitor I'm using. This leads me to believe
    The only thing left I can think of is to hook them straight from the DVI port to my HDTV, but I don't have a DVI cable, much less know ANYTHING about DVI. Could it be that these particular VGA monitors don't like AGP video cards, or some sort of weird incompatibility that isn't well known?
    I figure if anyone's seen something like this, you guys have. Here are the AppleHistory entries on these machines, if it helps:
    http://apple-history.com/body.php?page=gallery&model=g4giga&performa=off&sort=da te&order=ASC
    http://apple-history.com/body.php?page=gallery&model=g4_mirror&performa=off&sort =date&order=ASC

    The software on the hard drives may be set for a video setting that won't work with your monitor. A few things to try (in order):
    1) Reset PRAM. Hold down Cmd-Option-P-R when booting until you hear the third Boing.
    2) Hold down Option when booting. Should show symbol of hard drive, plus a couple of arrows.
    3) Boot from a CD (Install disk or, preferably, Hardware Test Disk).
    4) Safe boot. Hold down "S" just after the boing. Release it when (if?) you see the turning gear.
    If it is a scan rate problem, one of these should show some video.

  • Mac Mini with Dell Monitor

    I just bought my dad a Mac Mini and gave him my big Apple Monitor (can't remember size but bigger than a small TV:). Well dad says the monitor is too big and wants to use his Dell monitor. I called support and for the first time I couldn't understand the technician, his accent was too strong (I really hope Apple hasn't outsourced their support). Anyway, what I got from the conversation had something to do with a VGA adapter to a DVI? I have looked at the other topics on using non-Mac displays but they aren't really on point. Any help is appreciated:)
    Thanks
    Lisa

    If the Dell monitor has a VGA connector (also referred to sometimes as 'analog'), then all he will need in order to use it with the mini is the DVI/VGA adapter that is included with the mini and therefore should be in the box. I use a Dell display with one of my minis this way and it works just fine.
    If the Dell has a DVI connector (which is digital) then it will plug straight in without the adapter.
    Almost all computer displays in the past 10 years and more use one or other of these connector types - most are VGA.

  • No signal error with mac mini to acer monitor

    I bought an Acer monitor and a Mac mini back 11/11 and it has worked fine.  I recently moved the computer to a new room and when I set everything up I got a no signal error with the monitor and went to sleep mode.  I have tried another monitor (viewsonic) and a new VGA cable and a new VGA to dvi converter to no avail.......any suggestiins....frustrating thing is both monitor and computer are working.

    Try resetting the SMC andNVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
      About NVRAM and PRAM
    Next call Apple since yo have 90 days of free telephone support
    Complimentary Support (USA)

  • Mac mini and LG monitor: screen is stretched and resolution is awful. Can someone help me fix this please?

    I have a Mac mini (bought in 2013) and the LG 20EN33 screen. I tried filing with the monitor's settings as well as the ones in display but the screen is stretched and the font is quite big. I saw a thread about Switch Res X so downloaded the app, but have no idea where to start to use it to correct issue. can someone help me please?

    You monitor is
    1600 x 900
    and only have VGA input
    http://www.lg.com/africa_en/monitors/lg-20EN33/technical-specifications
    With Switch-X you want to change the resolution to match your monitor's resolution.
    You have an old monitor and it may be best to get a new one that support the the now standard 1080p (1920X1080) resolution.
    I have not ideal how Switch-X works since I use the free version of Display Menu fro the Mac App Store

Maybe you are looking for

  • How can I get file folio

    I genered article to folio by folio build, I can review in the Indesign CS5.5. I hava a question, but how can I get the file folio.

  • Problem Adding iCal Events Received via Email (used to work fine)

    My wife and I share iCal calendar events between our Mac's via email. A month or so ago I started getting this error when clicking on the link that comes with the iCal event email: "This calendar file is empty. No new events have been added to your i

  • Narrowing search in iTunes music library

    Hi All...I'm using iTunes 7.0.1 on a MacBook Pro and wondering if there is a way to narrow the search criteria in the music library. For example, searching for a song title "Love," and wanting to see songs with only that word as the title, not songs

  • Excise Reversal Thru J1IEX

    Hi Experts, We have posted a MIGO and takes the modvat against one GR. Since, their is some problem in MIGO, and we want to cancel the MIGO. I have cancelled the MIGO and when I am reversing the modvat thru T Code J1IEX, message is coming "Material 

  • How to keep two HD's in sync?

    How to keep two HD's in sync? They both contain my Sample Libraries, one is in my desktop the other in my laptop-essentially they contain the same items, but, the thing is: when I'm working on one I begin to delete, modify and add to the pool, and so