Mac OS 10.5.8 issue

I have Mac OS 10.5.8 and I want a trial of Adobe apps, but I cannot download any of them because I cannot open the installer (I also suspect the apps will have problems on my computer). What are my options? Can a try Adobe CS5 apps?

Mac OS 10.5.8 is not going to meet the minimum requirements for the CS6 applications as well as the Creative Cloud. I would recommend upgrading your operating system.

Similar Messages

My iphone 4s and ipad 2 both with 7.0.4 update will no longer connect to wifi but non-mac lap top has no issues

my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.

Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
If the SSID is not the default then the reboot should fix it.

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

Can't restore my iPhone 3gs. Tried 4 different Macs and 1 PC, all issue error response, mostly

can't restore my iPhone 3gs. Tried 4 different Macs and 1 PC, all issue error response, mostly errror 2001 snd the PC cited error #21. Even tried different USB cable.
It started by not turning on and it still does not unless plugged in. Then once it displayed a colorless grey screen that said "no service" and the battery symbol said 100 %. After resetting the iPhone it now is recognized as an iPhone in recovery mode.

sounds like it's time to bring your phone in for evaluation

Mac Pro 2008 having boot issues...

Hi,
My Mac Pro is having boot issues,It occasionally gets stuck when I turn it on and the fans go up a bit then I just get a grey screen, sometimes just shutting down and restarting works and sometimes not. I repaired the disc though it says has no issues and repaired permissions. It still does it. if I hold down the option key and boot and select my system drive then it boots fine. Once up and running everything seems fine it wakes from sleep no problem but after a shutdown it sometimes will not boot, it's almost 50 50 chance at this point that it does not boot. I can try booting off and older back up and see if it happens. I do have two video cards and 12 gigs of ram but not sure when this started to happen but it seems to be happening more often lately.
The Mac Pro warranty is over, taking it in for service is not an option at this point. I will install Snow Leopard on a new drive and see if it still happens as a test.

88 * C is HOT
Hard drives are not much of an issue, even 4, though I don't like now that WD Black tend to run 40-42C.
I recommend everyone run SFC regardless. It should be a REQ'D background app!!!
That and Temperature Monitor or iStatPro.... but on the whole only use the minimum and no duplication, not even for checking SMART health status. "less is more" or the olde "too many cooks" approach - your system runs better, even faster, and less trouble.
Kicking the fans up 400 rpm makes a significant change in temps. But of course if it is
Hutch
Pushed in corer
Up against wall
No air flow
Direct sunlight
.... can't help much or enough

Why do my MAC Microsoft Office printouts always issue me an additional print copy of the Filename, author, date, minutes, words etc? It is wasting ink and paper. What can I do to remove this?

Why do my MAC Microsoft Office printouts always issue me an additional print copy of the Filename, author, date, minutes, words etc? What can I do to remove this? It is wasting ink and paper.

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail".

I recently changed from a pc to a mac book. The major issue I am having right now is getting yahoo to work properly. The major thing is autocomplete does not work and I do not know how to load my contacts to "mail". Furthermore, I cannot attach any type of documents to my emails (Yahoo says there is a problem). I suspect there is a setting somewhere, but I don't know where. Javascript is enabled, so I am out of options

Which os are you using?
Yahoo issues should be posted in their forums or contact Yahoo tech support.

Mac mini mid-2011 display issues 1920x1200 on a HDMI monitor?

Just puchased a mac mini and am challenged by the display settings. When I first powered it on using either a display port to HDMI or supplied hdmi to DVI (then the monitor's DVI to HDMI cable), the display is severly off center with issues seeing the system bar on top and icons on bottom. So, once I was able to get to the System Panel, I found that it configured itself to 1920x1200. I cannot get 1080p to center and 1080i has grainy text. Does this mean I need another apple accessory, ie display port to vga? Or is this an indicator that monitor and mac mini are incompatible? Or is this an indicator that the mac mini has a lemon card?
(NOTE: I am downloading system updates to see if there is a firmware update. Thanks
Proc - 2.5 i5
Mem - 4 GB
Graphics - Radeon 6630M
OS - OX Lion 10.7.3
Monitor- LG L246WP (3 hook ups: componet, vga, hdmi)

Your monitor has a native pixel resolution of 1920x1200. There is no point in trying for 1080-p or -i.
I run two 1920x1200 monitors via HDMI (with passive cable adapters where necessary) and I use these choices:
...and they are both pixel-sharp, filling the screen, and yet menu bars totally visible!

Mac Pro w/ Lion Having Issues

Every since I upgraded my early 2009 Mac Pro 2.66 Quad-core Xeon, I've been having some strange issues.
For example, my accounts were set to log out after a certain amount of time of inactivity. By the time the account logged out, my display would have gone to sleep. When I woke my display to login by clicking the mouse or pressing a key on the keyboard, my display would only show about a quarter of an inch around the mouse pointer. When I further moved the mouse pointer, the display only drew where the pointer had gone.
Now my accounts simply lock after a period of inactivity. When I unlock the account, the translucent menu bar on the top of the screen shows a different desktop picture than the rest of the screen. When the desktop either changes or I change to another workspace, the menu bar will change also and match the rest of the screen.
Also, I've been having a lot of issues with my DVD program accepting the disks that are loaded into the player. The only way to get the DVD player to accept the DVD is to restart the computer (logging out works sometimes, but not all of the time.)
On a different note, my Mac Pro does not go to sleep by itself and hasn't since the summer of 2009. I've tried everything including turning all network connections off -- nothing has helped. I have to put my Mac Pro to sleep manually. Strangely, my Mac Pro sleeps just fine with Windows 7. Hmmm...
I've performed about three clean installs of Lion hoping that would resolve the issues I'm experiencing. Clean installs didn't help.
I wonder if maybe my video card is getting old and causing some of these issues -- particularly those issues related to the display.
Below are my specs:
Mac Pro
Early 2009
Processor: 2.66 GHz Quad-Core Intel Xeon
Memory: 8 GB 1066 MHz DDR3 EEC
Graphics: NVIDIA GeForce GT 120 512 MB
Software: OS X Server Lion 10.7.2 (11C74)

That sounds like several different issues, and some of them pre-date Lion. Upgrading is unlikely to ever solve pre-existing problems and more likely to further exacerbate them.
One the 'no sleep' problem. Do you mean the display or the hard disk sleep? I'm assuming you've already looked at the settings in Energy saver. It sounds to me like you have something running in the background that is preventing the hard disk from sleeping. Lots of programs can do this, including iTunes, Transmission or anything that causes hard disk activity. If you can't think of anything that is obviously running, have a look in your login items ( > System Preferences > Users & Groups | Login Items) for some background process (little snitch? clamxav? or anything that scans your system).

Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttales

William Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales

Final cut studio 3 and my mac pro major and unnecessary issues

just a heads up, sorry for my grammar, I have been using final cut pro since it was 3.0 on my old g4 upgraded to every version since. ive edited on final cut pro ruffly 40 hours+ per week since. now i just upgraded to final cut studio 3 about 2 weeks ago and ive been having major issues with speed and freezing and rendering and the new sharing features and motion and everything.
lets start from the beginning.
i have a mac pro 1,1 with dual core intel xeon 2.66 ghz
7 gb of ram
osx 10.5.8 (cant upgrade to snow leopard just yet due to sxs problems and heard its even slower)
NVIDIA GeForce 7300 GT (thinking may be the culprit)
i have 2 monitors one 22" and my main 24" running both through a dvi cable
now the first hour i started working the computer froze up completely, mouse frozen and everything
(never happened before) after a day of unexpected quits and constant restarts i disconnected my second monitor.
im still having the speed problems sometimes even seeing scrambled images for icons on my os dock. i dont know what to do. ill leave something to render over night, wake up and check on it and the program quit. again. i have a deadline on a video coming very quick, and ive been searching this issue on all the discussion boards here and creative cow and haven't seen an answer yet. spoke to customer support early in the issue and tried everything they said ie: new user, different drive, yada yada yada. the only thing i havent done is reinstall osx and flush my whole computer. im definatly not prepared to do so and then still have the problem. anyway. if anyone can get through this runon of a post please please help im despreate. let me know if you need anymore info and ill be glad to provide it, and if anyone that helps lives in the ny area i would be honored to buy you a drink in return for your support.
thanks for your time.

HOW did you upgrade? Install FCS 3 on top of FCS 2? That is not the best way to do it. Plus some of the issues you are having seem like OS issues. The best thing to do is the "scorched Earth" approach. Fresh install of the OS and fresh install of FCS 3. Always when upgrading this is the best method. And the make sure that you can go back if things don't work is to get a NEW hard drive, install the OS and FCS3 on that, and keep the old drive. Or clone your hard drive (carbon copy cloner), then erase and install. Or at least clone your drive before you update what you have (which is not the best way).
Too late now, I know, but file that away for the future. Now you should backup all your data, then erase and install Leopard again, then install your Apps. This will take a day, maybe a day and a half, and then you will be up and running. Better than trying to stuggle for days or weeks with a staggering OS.
Shane

Adobe Reader 9 and Mac OSX 10.5 - FDF Issue

I have an issue that only happens when using Adobe Reader 9 and Mac OSX 10.5.
When submitting a form from within a PDF, the FDF that gets sent is completely blank.
Tested on Mac OSX 10.4 with Adobe Reader 9 - no issue
Tested on Mac OSX 10.5 with Adobe Reader 8 - no issue
Tested on Mac OSC 10.5 with Adobe Professional 8 - no issue
It only seems to be a combination of OSX 10.5 and Reader 9. Does anyone have any clue about the settings of these two and what might be happening?
Any help is greatly appreciated.

Mac OS 10.4.11: I could not open pdf docs today (12-24-08), uninstalled & installed Adobe Reader 9.0.0. pdf docs icons changed but open, however cannot open Reader from Applications and get: Adobe Reader
Version 9.0.0
Installing/fixing installation
Then immediately get this error message:
Adobe Reader could not install correctly.
Adobe Reader was unable to install a necessary component
and must quit.
Any help out there for me?
Thanks, Tony

My new iPod Classic will not sync with my new Mac Book. My iPhone 5 does, so does 2nd gen. iPod touch. Apple Store cannot figure it out. Tried different Classics on different Macs, same thing. iTunes update issue ?

The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.

By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Mac Mini (mid 2011) Display Issues

Hello.
Recently I started having some issues with the display from my Mac Mini (mid 2011, core i7, 8GB, OS X 10.9). During usage the screen started flickering erratically and then went blank. I turned the Mac off and found that it was very hot so I removed the bottom cover and the RAM chips and gave it a bit of a clean (it was quite dusty) then I allowed it to cool before putting it back together. After putting it back together it worked for about a day until it had the same problem.
Now on startup the following occurs:
1. On the start-up screen (where the Apple logo is displayed) the screen is overwhelmingly pink (display RGB settings are fine), except for the left half of the Apple logo which remains grey.
2. After progressing through the start-up screen the display goes white and nothing further happens.
I have checked the display and it works fine. The HDMI cable is not the issue either.
Does anyone have any ideas as to what might be causing this and a possible fix?
If it is of any help the monitor is an ASUS MT276H.
Thanks.

So I have tried a SMC reset and all that has changed is the front indicator light is off and the fan has kicked it up to 11. Please find a picture of the display I described earlier at the following link: https://www.dropbox.com/s/wirrc01xut3p8tx/Photo%201-12-2013%2010%2054%2004%20pm. jpg (sorry it was taken with an iPhone 4).
I have never performed an SMC reset before but it seems like it is taking a long time and/or not working. I'm at a loss to what this might be.

Boot camp / Mac OS X Leopard clock issue

Howdy,
Yesterday, I installed XP on my MacBook Pro using Boot Camp and I've come across a quirk that now comes up on Mac OS X. The clock is 5 hours behind! When I start up in Windows, the time is fine (set for US Central time zone). However, when I start up in Leopard, the time is stuck 5 hours behind. I checked the time settings and it is also set on US Central time and it would not let me manually push the time ahead by 5 hours. (The minutes are correct, so this morning at 7:43 AM, it was showing up as 2:43 AM).
Do you know what would cause this? How do I fix this?

Hello.
I searched around a bit more and found out this is an ongoing issue. I've read over previous commentary on this issue and will try some of those techniques.
Thanks.

Mac OS 10.9 Mavericks (Issues)

Hi,
We just upgrade from Mac 10.6(Leopard) to 10.9(Mavericks). We have encountered the following issues:
Label with color in the folder – If we click on the label for selected items. The label will applied correctly for folders or files on the earlier version of Mac. But the new version of Mac (Mavericks) does not work this label option.
Taking longer time in Search – In an earlier version, any search will find immediately. But this version of Mac (Mavericks) does not search properly and a result says no item(s). If we go ahead and search again, then the search item will appeared on the Mac.
Copy and Paste option – In an earlier version, the copy and paste option on the server working well. But this version of Mac (Mavericks) we need to try at least 3 to 5 times and then the files/folders will paste into the destination folder. For just do copy and paste it does not work well.
Refresh Folder(s) – The folder(s) does not get refreshed every time on the server. It will only refresh when we create a new folder.
Can you please help me on the issues to resolve in this version of Mac (Mavericks) that is listed out above. I would appreciate if someone response to us immediately.
John

I didn’t’ see an official statement about this issue.
Can you check that this problem happen on several MAC computer?
Please update Lync for Mac 2011 to the latest version if you didn’t do that.
Check if you can search the full SIP address of a Lync users. This may be a replication issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mac OS 10.5.8 issue

Similar Messages

Maybe you are looking for