MAC OS no maps in the containers

Unfortunately for mac os no maps in the containers.
This example works in WindowsXP OS but does not work on MAC
OS
quote:
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="
http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
private function changeHandler(event:Event):void {
image.source = event.target.selectedItem.nativePath;
]]>
</mx:Script>
<mx:HBox width="100%" height="100%">
<mx:FileSystemTree width="50%" height="100%"
change="changeHandler(event);"/>
<mx:Image id="image" width="50%" height="100%"
scaleContent="true" />
</mx:HBox>
</mx:WindowedApplication>
Can somebody suggest what is the problem?

Thank you very much! url works fine.

Similar Messages

  • Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

    Where can I find a mapping of the Mac Powerbook version number (e.g., 3.1) to the dates (e.g., "late 2007") that Apple uses for indicating compatibilty with OS upgrades?

    There were no PowerBooks made in 2007. By then Apple had switched over to Intel and they were making MacBook instead.
    If the MacBook is what you really want try http://en.wikipedia.org/wiki/MacBook
    Allan

  • Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

    Then I suggest you post your question the Microsoft Mac forums since it's their products you're having trouble with
    http://answers.microsoft.com/en-us/mac

  • Has anyone used Apple Maps (on the Mac) for RoadTrip planning?

    I would like to use Apple Maps to plan a road trip, but I don't see a way to drop multiple pins for multiple locations.  for example, I'd like to visit South Dakota, specifically, Custer and DeSmet, but I'd also like to visit Devil's Tower in Wyoming, the petrified forest which is close by, some caves, etc.  I would like to be able to set my starting point and drop some pins for points of interest and then figure out what else is around those points of interest (PINs) such as restaurants, hotels, historical sites, etc.  And finally be able to pull all this together so I can figure out the road trip.
    Has anybody done this and if so would you be willing to share some tips?

    I don't see a way to drop multiple pins for multiple locations
    This can't be done with Maps at this time. The best you can do is amass a set of bookmarks that contain a maximum of one starting point and one ending point with no way to organize them beyond the order in which they were created. (A completely fruitless exercise in my experience.)
    IMO, you're much better off creating maps with Google Maps, saving those maps, then accessing your saved maps through the Google Maps app (in its settings) on your iOS device or via the Web on a Mac. You can also use the Google Maps app in conjunction with the TripAdvisor app and even the OpenTable app to navigate to places to stay and eat anywhere in the country.
    (Don't underestimate the value of paper maps for long road trips like this, either.)

  • I can't open iTunes on my brand new Mac!I am getting the message that I am exceeding my limit of 5 computers! Huh, I only have two desktops and two laptops (not counting my new MacBook Pro). I do have an old (discarded) laptop that had iTunes! Help!!

    Hi! I have a new MacBook Pro, but I haven't been able to put iTunes on it even though I have used it for years on my iPhone, iPad, and two Windows desktops and two Windows laptops. I keep getting the message that "I am exceeding my iTunes account limit of 5 computers (not counting my iPhone and iPad, which are explicitly excluded from the count according to the message)". As anyone can see, I only have 4 computers, so I should not have any problems with installing iTunes, but this same message says that I need to deauthorize at least one computer or maybe I have extra authorizations on a computer.
    I can't even find a list or map of the computers on my iTunes account! Please, somebody help ASAP!!!!! Thanks!!!!!
    Murray in Atlanta
    **** cell
    Message was edited by: lmfj20001
    <Personal Information Edited By Host>

        Deauthorize all of your computers and authorize the computers you use.
        http://support.apple.com/en-us/HT6283
      A new Mac comes with 90 days of free tech support from AppleCare.
      AppleCare: 1-800-275-2273
    Best.

  • How to call the second mapping in the first mapping fails in the BPM

    Hi All,
    I have a scenario like this.
    There are two mappings. There is a one condition while genearying the root element of the first mapping. If this condition is not satisfies the first mapping will fail. If this mapping fails i want to trigger another mapping.
    How to achieve this functionality.
    If it is possible with BPM. how to call the second mapping in the BPM.

    Hi
    you can not create the containter for the synchronous interfaces.
    you have to craete the two asysnchronous abstact interfaces .
    thenusing those two abstract interfaces you have to define the containers in the BPM.
    and you also have to define the interface mapping b/w those two abstract interfaces.
    once you define the interface mapping you will be able to select the interface mapping using the transformation step in BPM.
    once you select the interface mapping in BPM then you will be able to selece the interfaces
    if you still face the problenm please reply me back.
    Thanks
    Rinku Gangwnau

  • When opening any page associated with Google (main search page, gmail, google maps, etc) the font is so tiny it is unreadable. Any other website is fine and this only happens with Mozilla. I just downloaded 3.6.12 and it's still a problem.

    When opening any page associated with Google (main search page, gmail, google maps, etc) the font is so tiny it is unreadable. Any other website is fine and this only happens with Mozilla. I just downloaded 3.6.12 and it's still a problem.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • I use a 'Geocaching" website, and am no longer able to see maps on the webpage

    I go to 'Geocaching .com' and when I log on with my user name and look at a cache via 'Hide and Seek a Geocache', I get a page which shows me the cache details.
    This page should show me a map of the cache location, but the map is always blank now.

    What kind of images are missing?
    Are that background images?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB
    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    *http://kb.mozillazine.org/Website_colors_are_wrong
    Make sure that you allow pages to choose their own colors.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    If images are missing then check that you do not block images from some domains.
    *Tap the Alt key or press F10 to show the Menu Bar
    Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
    Check "Tools > Page Info > Media" for blocked images
    *Select the first image link and use the cursor Down key to scroll through the list.
    *If an image in the list is grayed and "<i>Block Images from...</i>" has a checkmark then remove this checkmark to unblock images from this domain.
    Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
    There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *http://kb.mozillazine.org/Websites_look_wrong

  • Windows 7 and Mac Lion partition maps don't match

    I recently upgraded the hard drive in my late 2008 Macbook, and I wanted to copy both my Windows 7 and OSX Lion partitions. I used Time Machine to back up my Lion partition and Windows Backup to back up 7. Then I switched the hard drives, restored Lion with no problem, partitioned the drive into two bigger parts than were on the old harddrive, and restored 7. My problem is this; Disk Utility in Lion shows the correct partition sizes (420 GB for Lion, 480ish for 7), but the Windows 7 Disk Management shows the old partition size (150ish for Lion, 160ish for 7). The rest is just shown as free space. I've tried using the "extend file system into free space" option in Windows 7's Disk Management, but that overwrites most of Lion's data (since Disk Management thinks that its free space). My question is how do I get the partition maps to sync up? I have rEFIt, but when I tell it to sync partition tables, Windows 7 crashes and won't start without a reboot. I'm starting to hate Windows 7...

    From your posts I assume that you have 3 drives:
    drive A - new internal with MacOSX and Boot Camp/Windows partitions.
    drive B - the original internal with MacOSX and Boot Camp/Windows partitions.
    Back up external drive(s) with TimeMachine  and Windows Backup.
    Forget the Backup Drive(s) for now.
    You will need a way to connect the original drive to the Mac via USB . If it is not in an enclosure then one of these connectors will do the job.
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
    http://www.granitedigital.com/usb20tosataideharddrivebridgeadapter.aspx
    I think you will need to use Winclone as Paragon is a windows startup application and I don't dee how you can do that unless you reinstall the original drive B (can't start Windows from an external drive). There is a Paragon recovery CD you can burn but I don't know what the limitations are with burning from the Mac. Maybe check with the company.
    Since drive-A has a good mac OSX install you need to clone the Boot Camp/Windows partition from the original drive-B to new drive-A. You should start up from drive-A and connect drive-B. Use Winclone to replace the drive-A Boot Camp partition with the original drive-B Boot Camp partition.
    If the Paragon recovery cd will work then you start from this disk and clone the original drive-B Boot Camp Partition to the new drive-A Boot Camp Partition.

  • I have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    Hi,
    Have a Look at these Links on Home Sharing:
    http://support.apple.com/kb/HT4620
    http://support.apple.com/kb/HT3819
    Could be what you need...
    Cheers,

  • HT1284 Can I back up my Mac and my pc to the same external hard drive?  If so, could you explain how? Thanks.

    Can I back up my Mac and my pc to the same external hard drive?  If so, could you explain how? Thanks.  I am a new user with mountain lion.

    You could partition the drive into 2 partitions.  One formatted as HFS+ for Mac OS X back, and one formatted as NTFS for Windows backup.
    You would have to move the drive from system to system to do your backups.  If there are 2 systems, I would suggest just getting separate drives for each, unless they are both laptops, then you will be disconnecting the drives all the time anyway.
    Unless Windows is running in a virtual machine on your Mac.  Then a partitioned drive would be fine.

  • Mac mini can not find the NAS

    In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?

    I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
    Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on.

  • When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and I get

    When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and I get the Mac OS X can't repair the disk error message. Then the spinning colored pinwheel pops up and I can't use iTunes. Please HELP!!!!!!

    Sounds like your iPod is broken. Take it to Apple or someone else who repairs iPods and see if you can get it fixed, or get it replaced.

  • Hi Guys I have asked to transfere my creative suite from windows to mac, no problem, I got the serial number, but I have a windows installation disc how to I get the mac version on my mac computer?

    HI Guys I have recently asked to transfer my Windows creative suite to a Mac computer. I received the serial number but unlike my lightroom install disc, which is win and mac, my Creative Suite disc is windows only, how do I go about installing a Mac version of my creative suite onto the Mac computer?

    I am talking about the Ver 3 download link that came with the purchase email.
    That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
    Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
    If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
    /Applications/Aperture.app
    /Library/Application Support/Aperture/
    ~/Library/Application Support/Aperture/
    Leonie

  • I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

    .. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update"  It's a full version "upgrade" that has to be done using the install discs (or disc images).
    -DH

Maybe you are looking for