SC - Item transfer in process error
Hello Guys
Can anyone tell me what is this below error u2018Item transfer in processu2019
000000001 I1111 Item in Transfer Process (Active).
What are the causes for this error and how to fix this.
Thank you.
Hi,
Schedule jobs Clean_ReqReq_UP and BBP_GET_STATUS_2 in background to run every 5 minutes.
Check whether your using task ID 40007988 in your process schema for automatic process level.
Assign the user WF-BATCH in the Organization structure.
You can refer SAP Note 1480994.
Also refer link: http://wiki.sdn.sap.com/wiki/display/SRM/ShoppingCartStatusI1111-+Resubmit
Regards,
yaniVy
reward if helps
Similar Messages
-
Item transfer in process in SC for ECS
Hi,
I am using SRM 4.0 in Extended Classic scenario.
I have some shopping cart items that are in status item transfer in process.
Ideally once approved a PO should be created out of it. We can push it to sourcing by sourcing relevant indicator as work around but why is this happening and isnt there any way for it to be made as a PO.
Please advise.
Regards
ZubairHello,
In general, the status Item in Transfer Process (I1111) active is an incosistent status for shopping carts.
However, to rectify such shopping carts, you should use BBP_ALERT_SB_NOTTRANSFERED, which would change the status of the shopping cart item to 'Error in transmission' (I1112) and later this shopping cart can be retransferred from the application monitors/monitor shopping cart transaction.
Note 441768 gives more detailed information about this report.
If you want to debug this process, consider note 1173815.
Kind regards,
Ricardo -
Transfer requirement items to be processed still exist. message no. L3 449
Hi gurus
i have the error during saving the Partial TO , error like "Transfer requirement items to be processed still exist.
message no. L3 449 ". kindly suggest me , where i made mistake
with regards
DINESH KUMARHi JURGEN,
whatever you told ,I followed and Activated partial picking for shipping.... but that is for SD module transaction.. i talking about Partial transfer order of goods issue against production order....
If you have difficult to understand my queries means, kindly send me your personal mail id. i will the screen shots to your mail id.
THANKS YOU FOR UR SUPPORT
With Regards
DINESH
Edited by: code acess on Dec 15, 2011 5:27 AM
Edited by: code acess on Dec 15, 2011 5:47 AM
Edited by: code acess on Dec 15, 2011 6:12 AM -
Interface failure with the error : Transfer to Process Engine
Hello All,
We are receiving 2 messages for one SiteMaster idoc triggerred from SAP ECC. Its a BPE scenario.
1. We are not sure why we are getting 2 entries in SXMB_MONI.
2. 1 of the message status shows Successful Flag but its queue id : XBQO$PE_WS95000004 is in failed state in SMQ2. We have tried Execute LUW and its not working, hence we have given Save LUW and saved it SMQ3.
3. The second entry shows the status as 'Transfer to Process Engine' with a proper queue id.
Attached the screenshots. Kindly check. Thanks in advance.
Regards,
KarthiSPANy how if you want to delete those BPM runtime instance you can do so by deleting the logical instance of the BPM instance
go to SXMB_MONI and click on PE which got stuck and it will take you PE engine go to list technical options and chose workflow log option and then chose delete logical instance option
/people/michal.krawczyk2/blog/2009/03/18/xipi-bpe-admin--logical-deletion-of-a-process-instance
Rajesh -
When I am downloading certain files from the internet, the files are not mounting, and I am getting a "No child Processes" Error. I have run the apple repair disc over the computer, however, the problems is still happening. Can anybody help to me fix this problem???? Thanks
Hi-
Welcome to Discussions!
Is it possible to download what you want from a different server? The error could well be the result of file problems on the other end.
To further insure that it isn't your system, run a full set of maintenance scripts, and clear logs, caches, and other temporaries.
A last item to "clear" your machine, would be a restart be fore trying to download.
Should these proceedures fail to fix the problem, I would consider the problem to be with those "certain files". -
An unexpected processing error occurred. Please contact Microsoft
Before I get flamed like I did on StackOverflow, can I please make the point that there does NOT seem to be a clear route for getting official support for the Live SDK from Microsoft? I'm just trying to get someone from Microsoft to explain to me either
what I need to be doing to my code OR how best to reach out to someone at Microsoft regarding this particular issue.
Using this C# code:
LiveConnectClient liveClient = new LiveConnectClient(currentSession);
LiveOperationResult operationResult = await liveClient.GetAsync(file.FileLocation);
dynamic contentResults = operationResult.Result;
IDictionary<string, object> item = contentResults as IDictionary<string, object>;
the following exception occurred on the GetAsync call:
Microsoft.Live.LiveConnectException occurred
HResult=-2146233088
Message=An unexpected processing error occurred.
Please contact Microsoft.
Source=mscorlib
ErrorCode=server_internal_error
StackTrace:
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task
task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task
task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Relative_History.OneDriveViewModel.<GetPictureURL>d__86.MoveNext()
InnerException:
I've not encountered this exception before and the code works as-is on other files. Restarting the app and the code works as expected so I'm not sure what I'm supposed to do other than "contact Microsoft" as instructed and, as stated at the start
of this post, Microsoft don't say HOW to contact them.Hi,
Do you have some anti-virus software installed and set to scan network drive, temporarily disable it, check if that is the cause.
I also suggest you update the firmware of your router.
Please alos share more information in event viewer with us as mentioned by ZigZag31343x
Meanwhile you can contact the support of My Book Live
http://wdc.com/en/products/products.aspx?id=280
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support -
Process error message: Display on the same page
When I create a before header process and that has an error, the error message shows up on a page by itself with the OK button. This takes away the context of the error
Similar to how validations have the option of displaying inline on the same page, is there a way to have the process error message display on the same page?
ThanksI just want to display the error message on the same page, thats all. I dont want a error page with just the error since it takes away all the context.
Well what do you want to do, you can set a item to
hold a message and display that item in a region
when this_exception then
:P20_ERROR_MESSGE := 'Something went wrong here';So, P20_ERROR_MESSAGE would be a hidden item on the page?
Then display the item in a region.How can I display that hidden item in the region? So the region would just have this read-only text box in it? But then it wont be hidden? I guess I can conditionally display the region only if the error message is not null? -
Scheduling failed with ATP processing error
Hello All, We are facing an issue where in scheudling failed with error code 23. CAn somebody please provide few pointers on what to check on this and what could cause this issue. Below is the error: ATP Processing error Order Number :100065681 Line Number :1.1 Message: One of the group attributes failed your scheduling attempt. We need any pointers on this on priority . Appreciate your response asap on this .
Hi,
We got the issue and the root cause was the one of the option item linked to another option line which was already cancelled and when CTO scheduling process checks the BOM based on linking it was not able to find that option line among opened one and it was failing.
Thanks,
Abhishek Sharma -
Item Validation Resulted in Error(s)
Hi,
We getting this message ' Item Validation Resulted in Error(s)' while doing the following.
- Changed the ship to address at the header level for the booked order
- Oracle is asking whether to cascade the changes to the line level
- On selection yes to cascade the changes to the line level we are getting
this error message' Item Validation Resulted in Error(s)'
Do you have any idea about the fix for this problem.
Note - Currently we are using a workaround for this.
Step 1) deselecting and the Item identifier type and Ordered item on the MAIN order line tab --> Saving the changes
Step 2) Changing the Ship to address to the new desired value on the ADDRESSES tab.
Thanks
SunilHi - I am getting something similar when attempting to add a line to certain order via the Process Order API. The source for this new line is copied from a previous order but when I try to copy to the new order I get the same error. In order to get around the problem, I do not copt the original ORDERED_ITEM and ITEM_IDENTIFIER_TYPE (which was 'CUST'). When doing this, the order line copies to the new order successfully but shows the item's SEGMENT1 value rather than the ORDERED_ITEM from the source order. Any pointers would be much appreciated
Steve -
Error when reading Excel as a source OLE or COM processing error:
I received the following error when reading an Excel sheet directly into a target template table. Nothing fancy, but the error pops up immediately. I have found the problem and am posting the error and resolution to hopefully help others, -rs-
692 5900 EXL-300873 8/19/2009 9:16:49 AM |Dataflow SRC_SAPGLOBAL_ADRC_DF|Reader ADRC
692 5900 EXL-300873 8/19/2009 9:16:49 AM OLE or COM processing error: <Unspecified error>.
692 5900 EXL-300873 8/19/2009 9:16:49 AM |Dataflow SRC_SAPGLOBAL_ADRC_DF|Reader ADRC
692 5900 EXL-300873 8/19/2009 9:16:49 AM OLE or COM processing error: <Operation is not allowed when the object is closed.>.
I made sure nothing had the source file open.
Stopped and re-started the job server service.
The issue was that I had Data / Filter / Auto-Filter turned ON, and saved the sheet.
I re-opened the sheet and turned off the Auto-Filter and it runs just fine.
-rs-Hi
You and go with another approch us OdiSqlUnload package tool to transfer data from oracle table to .csv / .xls (or) txt file
Hope this may helps you.
Regards,
Phanikanth -
CDDB error and HTTP processing error
when I try to add a new CD to my library I get CDDB error and HTTP processing errors..... and download will only show the number of tracks and the time each track will play...this only happens on my PC.... and everything works ok on my laptop... I have tried the latest update...and I have compared settings between the two computers but haven't found the problem...
Since a recent update of itunes I cannot get CD track
names from Gracenote anymore. This problem only
occurs on my windows profile and not on other
profiles on the same computer. When I load an audio
CD, itunes recognises it but doesn't name tracks.
When I click on "Get CD track names" in the advanced
menu it starts as normal and then I get a window with
the message 'CDDB Error. HTTP processing Error.' I
have tried a second itunes download, which according
to the install wizard repaired all faults.... still
happening though. I don't have enough time in my life
to type in all the track names! Any help gratefully
received.
Sony Vaio
Windows XP
Solution document found!
Refer to www.info.apple.com/kbnum/n302538
Insert an additional step:
6a. Click on Disable All.
It takes a while to test one or a few items at a time, but it works! If you find these in your Startup list try selecting all and then unselecting these first. One of these was the problem for me but I haven't narrowed it down to one of them yet.
nwiz
SNDMon
dlbcserv
Copy Protection Notifier
Good Luck.
disaacson1
Toshiba Satellite P25 PC Windows XP -
AS2 Receiver Error: MIC not verified # unexpected-processing-error
When sending out a test message using Seeburger AS2 receiver channel I get the following error:
MIC not verified # unexpected-processing-error
So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
Do you have any idea on this?Hi ,
I have been facing this error and tried all the refresh and reimporting of certificate.
"MIC not verified # unexpected-processing-error"
could you be bit specific how to fix this ?
thanks in advance
Praveen -
Vendor Open items transfer from one Recon to Another recon
We have wrongly maintained one recon account in Vendor.
Is there any way to trnasfer Vendor Open items transfer from one Recon to Another reconciliation account..Hi,
The best way is to transfer the items from old to new reconciliation account.
Please use the following entries to transfer.
1. Dr Vendor a/c(Old recon a/c)
Cr Vendor clearing a/c
After nullifying the balance in old recon account, here chage recon in the master.
2. Dr Vendor clearing a/c
Cr Vendor a/c(New recon a/c)
F101 only post the adjustment entry at period end and reverse the same entry in next period. So, transferring the items is the best method. If you have volume of data, then create a LSMW for this.
Rgds
Murali. N -
Item Open Interface giving error for Org Assignment
We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?Pl do not post duplicates - Item Open Interface giving error for Org Assignment
-
Bug Report: #SQLERRM_TEXT# in Process Error Message
According to the Online Help for "Process Error Message" #SQLERRM_TEXT# should be replaced by "Text of error message without the error number". But it isn't.
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/I created an after submit PL/SQL process:begin
raise_application_error(-20000,'custom error text');
end;In the process error message attribute, I put:
My error message with #SQLERRM_TEXT# in it.
I submit the page and see this page:ORA-20000: custom error text
Error My error message with custom error text in it.
OKScott
Maybe you are looking for
-
AS2 Clicktag and Rollover questions
I'm creating a banner ad for Yahoo.com and am running into a conflict with the Rollover replay and Clicktag. Both are buttons on separate layers with the ClickTag on top. If the Clicktag button is on, the rollover (replay) button is ignored. I'm wond
-
Dear sap exports..., I want to know what is s_tcode authorization object.? and what is its importance...? please can any body help me .....and clarify my doubt.....
-
Can anyone help with this code
i am trying to create a html5 video gallery for my website I was wondering if anyone can help me with this code : Am i missing something got this from the adobe widget browser i can get the button fuctions but i can not seem to get the video to pla
-
No thumbnail rotation in Bridge CS4 under Win7/64bit
Bridge CS4 was working fine under Vista 64bit. After updating to Windows 7 64bit thumbnail rotation does not work (neither using [] shortcuts, nor the tolbar arrows). My computer has a GeForce 8600GT, to date in terms of updates. I tried resetting
-
6500 classic - apps does not work
I seem to get only very few applications to work on my phone. None of the preinstalled games does work (only sudoku works). Every time I try to open an application I get the message: "invalid application". Then I get the option to delete it. I soon a