MAc pro KB Numeric pad wont work with VM fusion & Xp

I cant enter numbers from the numeric KB into anything running on XP . The number sunder the F keys are fine..
D I need a new MS comp. KB or am I missing something obvious ?
J

Hi J,
well let's start with the 'obvious':
Did you try the 'Clear'-key (the one above the '7'-key on the numpad) ?
It's the equivalent of the Num-Lock key on PC -keyboards.
Regards
Stefan

Similar Messages

Will my Mac Pro 3.1 early 2008 work with Nvidia Geforce GTX460 768 graphix card?

will my Mac Pro 3.1 early 2008 work with Nvidia Geforce GTX460 768 graphix card?

Depends upon the OSX version you have.. You need 10.8.3 or later for a non- Mac flashed card. For more detail:
User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

Mac Pro 1,1 no longer working with 6870?

I've been using a 6870 in my Mac Pro 1,1 for over 6 months now with virtually no issues (some minor artifacting a few times). Earlier this week, the Mac Pro would no longer display any video. Display works fine, as I've tested it with a Mini. I tried connecting a different display to the Mac Pro, still no video. I've tried removing RAM, resetting SMC, PRAM, etc....
The Mac Pro chimes, boots up fine, keyboard responds. Only issue I can find is with the lack of video.
I tested it with another brand new 6870, and still no video.
I thought perhaps I downloaded some kind of Apple update that affected the 6870 working with it, but I can't seem to find anyone else with this issue on the forums. Thanks for any advice/help.
BTW, I've also tried booting from a drive with Snow Leopard as well as powering on with no drives installed to see if I could get the flashing folder. Still no video of any kind.

The use of 6870 in a 1,1 means NO BOOT SCREEN since there is no EFI32 EFI for them.
So, this could just mean that something is stopping the boot process before it gets to desktop.
You should have an EFI card on hand for times like this.
An old 2600XT would be ideal, works in all Mac Pros and doesn't need power plugs.
Ot use "screen sharing" to log in from another Mac and see hwat is going on.
Perhaps one of your power plugs has gone bad?

Why is my mac-pro ci7 running hot while working with imovie and eyetv?

Hello,
I am creating short videos of ps-3 gameplays. For recording I use eye-tv and my mac is connected through a HD-Haupauge with my Playstation. When transferring the recording-file from eye-tv to i-movie and getting started to work on the video, my mac runs hot. I have to underpin the mac, so that there is enough space for cooling, which doesn't help that much.
What could be the reason? I bought themac last year in summer. I am not sure about my operation systems number.
Thanks for any reply and good advice i hope to get.
Kind regards

You posted your question in the "Intel iMac" Forum. In order to get a relevant answer you should repost it in the "Mac Pro" Forum

Yoga Pro 3 Touch Pad Not Working With Win10

This has been hinted around in several other YOGA Pro 3 WIN 10 upgrades but we probably need to start splitting out each particular issue. My upgraded to Win10 with no issues on the upgrade itself. I performed the upgrade with a mouse attached and now I no longer an switch back to using the touch pad. Another way to say it is that my Fn + Delete button no longer works. I checked Synaptics for a driver but they don't list one for Win10. Any one know a work around to get the touch pad working again or a suggestion to fix? Thanks

I'm in the same boat - no touchpad after upgrade. I am sure we are the first of thousands to experience this issue.

Why my numeric key pad on my wired keyboard wont work with snow leopard?

Why my numeric key pad on my wired apple keyboard wont work with snow leopard?
Thanks - Farshad

What do you know, I figured out.
Go to System Preference > Universal Acces> Mouse > check the "Press the option key five times to turn mouse keys on or off.
Thanks

My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

My Screen quit on my ipod nano 6th gen... still syncs to my mac but the screen functions wont work... Whats up with it?

Read the PDF user manual for a possible solution: iPod Manuals and/or iPod Nano Support
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.
If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

Skype wont work with my mac os 10.5.8

afternoon, tried to download skype on my power book g4 and it after download I try to open the dm and it says wont work with this artitecture.
I am running 10.5.8 after I have download the dm the window that I should put it into the applications had like a do not enter symbol.
Thank you for your help

Your Mac is too old to run it.
http://www.skype.com/en/download-skype/skype-for-mac/
Click the system requirements on that page & you will see…
1GHz Intel processor.
Mac OS X 10.5.8+.
100 MB free disk space.
Either USB or regular headset if your Mac does not have a built-in microphone.
Download drivers if you are using an external webcam.
For voice calls recommend broadband connection with 100 kbps down / 100 kbps up.
For group video calling everyone on the call needs Skype 5.0 for Windows or Mac or higher plus webcams. For best quality we recommend you use a high-speed broadband connection of 4Mbps down/512kbps up and a computer with a Core 2 Duo 1.8 GHz processor. As a minimum you’ll need a high-speed broad connection of 512kbps down/128kbps up and a computer with a 1 GHz processor.
Your Mac has a Power PC processor not an Intel CPU.
See Skype's FAQ for more info…
https://support.skype.com/en/faq/FA34492/is-skype-for-mac-being-discontinued-on- mac-os-x-10-4-tiger-and-below-as-well-as-on-mac-devices-running-on-powerpc-archi tecture

Has anyone had the "equals" key in the numeric pad stop working since installing the Boot Camp 3.3 update

Has anyone had the "equals" key in the numeric pad stop working since installing the Boot Camp 3.3 update?

I have been an ardent user of aperture for years now and got used to the great workflow. Ever since version 1 I have been enjoying working with aperture. It is the workflow that kept me from changing.
I got a new MacPro 12 GB ram, 4TB HDD my library mostly indexed files sits on a raided 2TB for maximum of comfort. I did this in an effort to keep me from writing the posts I writing lately. I do not have the time rally to do this but reality is something different.
Today I am working on a job I need to finish quickly and in aperture workflow manner. So I switched to full screeeeeeeeeeeeeeeeen mode and after pressing 'H' for the HUD my screen started flickering. please look at the video I posted in my flickr account: http://www.flickr.com/photos/mawas/4719742585/
Now this is the second time this happened in a short time after I got a new mac and upgraded to 10.6.4! After the screen had jammed up : http://gallery.me.com/masuwa/100103 I needed to hard boot my mac I am getting nervous!

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
Since you're new to iPad ...
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

I want to install my Quadro FX 560 to my MAC PRO, but it can't work normall

I installed my Quadro FX 560 to my MAC PRO, but it can't work normally.
I can't find any drivers of Quadro FX 560 for MAC OS, and I am using MAC OS 10.4.7.
Would you like to give me the Quadro FX 560 driver for MAC OS??
My display card come from my old PC...but not use any more...
So I want to replace GeForce 7300 to Quadro FX560..
Mac Pro Mac OS X (10.4.7)

Would you like to give me the Quadro FX 560 driver for MAC OS??
You will need to firstly check whether it is compatible with your Mac and operating system, and then get the required software from the manufacturers of the Quadro.

Fire wire isight wont work with leopard

I have a g4 power book and since i updated to Leopard my isight camera wont work with ichat or any other application, it wont recognize the camera. Does this mean its incompatible? How can i fix the issue?

Welcome to Apple Discussions, gavz
It is compatible.
Try the suggestions in How to test your (external) iSight to ensure it is functional.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

External isight wont work with imac g4

Hello,
I recently purchased a second hand isight camera using ebay.
I have an older imac g4 and the isight wont work with it at all.
I have scoured the forums on this topic and looked through all of EZ Jim's suggestions but I think my problem is a little bit different.
I'll explain exactly what happens and my troubleshooting so far...
The imac G4 is powered off, I plug in the external isight via firewire 400
The imac boots up into leopard 10.5.8 (using leopard assist)
In system profiler the isight is listed under the firewire tab.
( I can post system profiler info on this if its needed)
When I turn on the camera ichat launches, but then in the video tab it says no camera is connected.
Photobooth just has the no camera sign, but interestingly when ichat is opened photobooth says "camera off"
sometimes photobooth even lets me click the photo button, it counts down but then it doesnt take a picture... obviously!
Skype doesnt work.
I have an imac 24" running snow leopard 10.6.6 .... that also detects the camera but it won't work with any application such as skype or ichat.
I have tried (on my G4) unplugging my usb bluetooth module but nothing changes.
My G4 is connected via ethernet to an external router.
The firewire cable seems ok, I dont have any other firewire devices, but if it was a problem with the BUS or the cable then im guessing it wouldnt show in system profiler.
I am thinking the camera is probably damaged, but before I start a paypal enquiry I would like to see if it is just my computer or a setting i need to change.
(oh I used the application isight updater in core services but the install button is greyed out)
Any help would be amazing!!
Thanks!!!

Well, about all you can do would be to try a different and known good
FireWire cable, as a replacement for what may be a defective FW400
cable that came with the iSight camera. The cable can be defective
with one bad wire, yet sometimes appear available to the computer.
• How to Troubleshoot iSight (note external vs internal)
http://support.apple.com/kb/ht2090
• iMac G5 (iSight), & Intel-based iMac: Using External video camera:
http://support.apple.com/kb/HT2819
If you know of someone with an older Mac without a built-in iSight
camera, to test that one on, this may be an OK idea. Not sure if you
could get any traction by taking the camera to an Apple Specialist
and ask if they could check it out for you; that may also cost you.
{And since your computer does not officially support Leopard 10.5,
the other avenues of support would probably not be open to you.
At least not with the old iMac G4 and an unsupported 10.5 install.}
I have an external iSight camera which was included with my G4 Mini
1.5GHz model, and that appeared to work OK with 10.5.8 at one point.
But I really have no need for it, since I don't use photobooth & so on.
And haven't tried that with my iMac G4 computers at all. No need to.
With a computer not equipped with an iSight camera, the Leopard 10.5
installation should still support the eventual addition of one; even if the
computer itself appears to not officially support a Leopard 10.5 install.
(You refer to Leopard Assist, a means to install in slower CPU Macs.)
The FW cable is about the most easy to consider at this point.
In the course of a year, I've found good replacement cables at
several places, even those at thrift stores in perfect shape, work
and I use them for FW external hard disk drives, primarily. To have
spares is nearly always a good idea. Test & keep known good ones.
I'm not certain how the external iSight FW camera may work on
a newer Intel-based 24" iMac with a built-in iSight camera, too.
Does your 24" computer have FireWire 400+800 ports? Can you
choose an external iSight camera and ignore the built-in one?
These secondary topics have probably been discussed in the other
forum area for Intel-based iMac computer models; if you chose to
try & use that camera with a model computer with one built-in...
• Apple - Support - Discussions: for Intel-based iMac
http://discussions.apple.com/category.jspa?categoryID=189
There is a possibility, if never tried and the iMac G4 computer was
acquired second-hand, that the FW port within it may be band; but
the cable is the first item since it is cheapest, in troubleshooting.
So, anyway, the hour is late here (1AM) so hopefully the matter
can be resolved with a known-good replacement FW400 cable.
You should not have to restart the iMac G4 (800?) model in order
to get a FireWire item to be recognized. It should appear in the
System Profiler's list under FireWire, such as things normally do.
Of course, the camera could be defective as well. Been some
time since they were available on sale, new from Apple...
You could ask around to find out if there is a way to use that
external iSight camera with your newer Intel-based 24" Mac
by someone having it ignore its own built-in camera; in a
way as to not affect its normal operation, that is.
Good luck & happy computing!
+{ edited 2x }+

Could not load the Multiprocessor Support module because it wont work with

Here is a strange error message, there are actually 2.
But they arent making PSE 8 unusable, just very annoying.
Here is the first one,,,,,,,,,
"Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
My new Mac has 2 processors? Could that be what the message is saying?
But when I click the error message away, PSE 8 works fine.
There is another one too,
"Could not load the FastCore Routines module because it doest not work with this version of photoshop."
I just click it away and no problem, just a pita.
So if they dont effect it, I shouldnt worry, but my classmates are concerned.
Do you here have any idea what it is, and how to get rid of it?
There is info on the web about it, but no solutions.
Thank you,
Jane

This is interessting, as does my new Mac have 2 processors or 2 cores? I havent come across how this works yet, nor how to find it on my Mac.
Yes, I just found a site which explains it well,
http://macperformanceguide.com/Optimizing-Cores.html
I have one processor with 2 cores.
And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
You sure explained this well! I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
http://kb2.adobe.com/cps/407/kb407809.html
Is what Adobe tells us, this is for Windows, but it could apply to Macs?
I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before. Thats confusing, as I would have thought it would have shown up right from the start.
I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
This will be fun to see what the real answer is! As I find out more, I will add it here.
Thank you,
Jane

MAc pro KB Numeric pad wont work with VM fusion & Xp

Similar Messages

Maybe you are looking for