Mac SE FDHD System 7.5 Install Issues

Hi there,
Got an old Mac SE FDHD. I repaired the internal drive with the Disk Tools system 7 disk, then have been trying to install System 7.5. I have the complete original Sys 7.5 diskette set, but not the 7.0 set (just that disk tools).
So, when I try to install System 7.5, I get to disk 2, and it tells me to install disk 1 again, then tells me there was an error in installation, my idsk is untouched, etc. Failure! But whyyyyy? I should note that my "Before You Install" 7.5 disc will not read, either in the SE on via my USB floppy drive.
I tried to make some System 6.0.8 install discs via Apple's download images, but they will not boot, either by creating floppies manually or in Disk Utility... I can't find a copy of ol' Disk Copy for OS X for download anywhere, as I know that makes "blessed" discs.
Here's two big side notes:
I don't have OS9 (or earlier) installed on any other macs. I also do not have a PC or Virtual PC.
Any help would be appreciated, I'm hoping to make a "Vintage MIDI" setup with this machine.
Thanks!

Unless your System 7.5 is a generic retail set (that is, not for a specific other Mac), you may have to expect problems. Anyhow, 7.5 would require 4 MB of RAM to be installed, and (even with that) it is not the most suitable operating system for an SE. System 6.0.8 or possibly 7.0.1 would be preferred.
The 6.0.8 and 7.0.1 disk images are intended for Disk Copy 4.2 (the Load Image file and the Make A Copy buttons). Alternatively, Disk Copy 6.3.3 can be used (the Make a Floppy command from the Utilities menu). It may be difficult to create properly sector-copied floppy disks under an operating system later than 9.x.
You could try to boot from one of your existing floppies (the Disk Tools disk?) and then try to drag-copy the whole system folder of that diskette onto the empty hard disk. If you are lucky, the SE will boot from such a temporary system. If so, the floppy drive would be free. You could then use 1.44 MB Mac-formatted diskettes to transfer downloaded 6.0.8/7.0.1, Disk Copy 4.2 and other files to the SE. If possible, keep the MacBinary (.bin) unaltered; do not decode until the files are on the SE. An old (ready-to-use) version of StuffIt Expander will be required, too (in this very case, you could try decoding the 4.0 at ftp://ftp.allume.com/pub/archive/mac/StuffIt_Expander/ on your more modern Mac first). Finally, make an attempt to create the system floppies on the SE.
Jan

Similar Messages

Mac mini 2012 new OWC SSD install issue

Hoping someone can makes sense of this report.
My macmini 2012 has been rock stable. 8 gig, Yosemite install.
Yesterday I installed an 120GB Electra 6G SSD as a second drive. Installed a fresh install of Yosemite. Everythign went without a hitch. System ran for 24 hours with non problems. Began installing my software and twice I came back to find the mini had rebooted under the original hard rive/system with a message that the computer had shutdown due to a hardware issue.
Checking Disk Utility the OWC SDD doesnt' even come up.
Rebooting it show shows up again, I can then select it as the start up drive and reboot with the SDD. Everything seems fine. Then a repeat several hours later.
This is the last report. Can someone translate? I don't know if I have a bad SDD, if it's a comptability/OS issue or if I possibly knocked something loose when reassembling. Thanks.
Anonymous UUID: 0324BA3D-2238-F9DA-88F3-7A5EABC15FB3
Fri Feb 13 16:20:59 2015
panic(cpu 0 caller 0xffffff8020bc1694): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.10.72/bsd/kern/kern_exit.c:361
Backtrace (CPU 0), Frame : Return Address
0xffffff812aa73e50 : 0xffffff802072fe41
0xffffff812aa73ed0 : 0xffffff8020bc1694
0xffffff812aa73f40 : 0xffffff8020bc135c
0xffffff812aa73f50 : 0xffffff8020c4b386
0xffffff812aa73fb0 : 0xffffff8020836e86
BSD process name corresponding to current thread: launchd
Mac OS version:
14C109
Kernel version:
Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64
Kernel UUID: DCF5C2D5-16AE-37F5-B2BE-ED127048DFF5
Kernel slide: 0x0000000020400000
Kernel text base: 0xffffff8020600000
__HIB text base: 0xffffff8020500000
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 22566388287438
last loaded kext at 245743569286: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa2e7b000, size 69632)
last unloaded kext at 306686868561: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa2e7b000, size 61440)
loaded kexts:
at.obdev.nke.LittleSnitch 4234
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.ApplePlatformEnabler 2.1.7d1
com.apple.driver.AGPM 100.15.5
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.AppleMikeyDriver 269.25
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.driver.AppleHDA 269.25
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIRController 327.5
com.apple.driver.Oxford_Semi 3.5.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.driver.IOBluetoothHIDDriver 4.3.2f6
com.apple.driver.AppleMultitouchDriver 262.33.1
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOSurface 97
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIReducedBlockCommandsDevice 3.7.3
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.iokit.IOFireWireSBP2 4.2.5
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 710.55
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: Macmini5,1, BootROM MM51.0077.B10, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, SMC 1.76f0
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x857F, 0x483634353155363446393333334700000000
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x857F, 0x483634353155363446393333334700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f4 12974, 3 service, 21 devices, 3 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST9500420AS, 500.11 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: hub_device, 0x04cc (Philips Semiconductors), 0x1521, 0xfa130000 / 4
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0xfa136000 / 8
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0xfa136300 / 9
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8281, 0xfa113000 / 5
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: PTZ-930, 0x056a (WACOM Co., Ltd.), 0x00b2, 0xfd130000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
FireWire Device: OXFORD IDE Device 1, EZ QUEST, 800mbit_speed
FireWire Device: OXFORD IDE Device 1, EZ QUEST, 800mbit_speed

thanks the replies. OWC sold me the kit, cable etc based on the Macmini's specs. I talked with support and the drive I installed should work with no issues.
They did have me reset the PRAM which did. They also told me I might need to install Yosemite 'several times before is sticks' - whatever that means. lol.
Anyway I zapped the PRAM. So far no mysterious restarts with the drive being unrecognized.
One thing I didn't mention though...
MacMini is in a backyard home office (about a 100 feet away with buried CAT6 cable connecting it to the network). I was using Screen Share from my MBP reinstall all my work software. Every crash occurred while using screenshare. I never had any crashes when I was actually sitting at the computer.
I don't know if that has anything to do with it - but I haven't used ScreenShare for any length of time to control the Mac mini since the pram zap. Figured I'll use the computer for a week or so and see how stable it is and then try using screenshare again and see if the behavior repeats itself.
Meanwhile I'll keep my fingers crossed.
I'm just suspect that it was a PRAM issue. But I'm a layman.

Mac Mini 2010 Server Snow Leopard Install Issues

I'm trying to install, well reinstall, OS X server on my 2010 Mac Mini Server. Everything is completely stock and I'm reinstallling via a Mac Book Air Superdrive and the OS X disc that came with my Mac mini. I'm installing it on the main disk partitioned to 100gb. Everytime I go to install it goes to restart and then I have no video. When I power down manually after this it only shows the CDROM as the boot disk but the drive shows ~7gb used when I get into disc tools. I've done this about 3 times now and I'm just about ready to return it. I'm using a Sony Bravia HDTV as the monitor via HDMI port for display. I don't have any other displays or macs to use either.

Jnko, I've reinstalled the OSx server on my 2nd HD using the MBair Superdrive and all went well. After installation there is only 7G used so that is proper.
If you're losing the video, try unplugging the HDMI cable and replugging at the point of failure. This usually resets the video.
Hope this helps.

Hyperion System 9 BI+ install issue

Hello,
I'm not sure I'm even in the correct forum for this question, but here goes:
I am having some issues with configuring Shared Services to integrate with MSAD
When attempting to configure the MSAD connection within the User Management Console I get the following errors:
When I try to use the Anonymous bind:
--Credentials, though valid, are not sufficient to perform search operation
When I attempt to provide user info for a normal user and even those of a domain administrator using the "User DN" format of "sAMAccountname=user1" as mentioned in the documentation
--Invalid credentials. Please check User DN and Password
What am I missing here?

I was eventually able to provide proper credentials to get past this issue.
What worked was using a line like this in the User DN field:
CN=<user name>,OU=Users,DC=<company>,DC=com

HOw can it take so long to get an answer on this Mac OS Flash Player 11.2 install issue

How do we get Adobe to help us with this? It can't be that difficult to get a fix can it. Hello Adobe....are you there?

I have the exact same problem. I purchased apple tv several years ago, and every time I go to rent or buy a movie it takes anywhere from 3 to 7 hours to download the movie. There is no spur of the moment "hey lets rent a movie tonight" because I know it will take overnight to complete the download. I've checked my internet speed and it spot on. I've noticed other threads with people having the same problem but no one seems to have a solution.

Windows 7 Install Issues with Mac Pro

I have Mac Pro with Windows XP SP3 installed with Boot Camp on a separate, dedicated 250GB HD.
I purchased an upgrade version of Windows 7 Home Premium. I hoped to install the 64-bit version. I upgraded, per Boot Camp I&S Guide, Boot Camp to version 3.1. After Boot Camp upgrade, I mounted the Windows 7 64-bit installation disk. Since the Windows disk did not open automatically, I then attempted to open the Setup.exe file but got the following error message –
“D:/setup.exe is not a valid Win 32 application.”
I suspect the Boot Camp 3.1 upgrade was for the 32-bit Windows XP system currently installed and this caused Windows 7 (64-bit) not to open.
If my suspicion is correct, would upgrading to Boot Camp 3.1 (64-bit) cause problems with the currently installed Windows XP? Any advice would be appreciated.

I have since attempted to boot from the Windows 7 install disk by using both the OS 10.6.3 System Preferences/Startup Disk and from within Windows XP using the Boot Camp Control Panel. In both cases, all I saw was a black screen with a “Select CD-ROM Boot Type” and flashing cursor. No keyboard input was possible.
If anyone encounters this problem, go to the Boot Camp/Installation and Storage discussion and search for “Select CD-ROM Boot Type”. Hal Jay Greene has an excellent article here titled “Select CD-ROM Boot Type Error installing Windows 7 in Boot Camp walkthrough” dated Mar 20, 2010 that walks one through the process of creating a boot disk for installing Windows 7 x64. Two minor comments on his discussion. John Anderson’s blog is at www.AndersonsHatch.com (note extra s) and Imgburn can be downloaded free from www.imgburn.com.
I used Mr. Greene’s procedure and the resultant boot disk loaded Windows 7 correctly.
Unfortunately, a new issue arose. Installing Windows 7 over Windows XP requires a clean install that eliminates all Boot Camp installations. After installing Windows 7, I attempted to load Boot Camp by inserting the Mac SL installation disk and clicking on Setup in the Boot Camp folder. The result was this error message: “Boot Camp x64 is unsupported on this computer model”. Fortunately, there is a procedure that worked for me, and my MacPro, to bypass this error message. It can be found near the bottom of this article http://blog.andersonshatch.com/2009/01/11/windows-7-x64-on-a-macbook-pro-guide/ on John Anderson’s blog.
Message was edited by: johnshap

Mac OSX: Flash CS3 Font Install Issues

Hi,
I have a Mac Powerbook G4 with OS X installed and Adobe CS3.
I've installed a font. The font works in Photoshop and Illustrator
but not in Flash CS3. Why? I've put the font in the Library/Fonts
folder and the User/Fonts folder and it still doesn't show up in
Flash. Apparently this is a problem for a number of people see
another forum here:
MAC
OSX: Flash CS3 Font Install Issues Forum
Please let me know what to do to fix this. I need to be able
to work with the font in all three applications Flash, Photoshop
and Illustrator.

Hi davidd61713525,
Sorry for not getting back to you sooner.
Unfortunately, it looks like something is wrong with the file system and the installer can't see the root drive to install to. A Google search returns numerous results affecting various products and the recurring theme is that something is wrong with the disk. There are many recommendations from various sources, but nothing definitive.
Here's a similar thread over on the Apple forums:
Broken Installer Permissions | Apple Support Communities
And a similar older one:
http://forums.macrumors.com/showthread.php?t=1203509
I would try the following options:
Try using the PKG installer. This is used Mac SysAdmins to install Flash Player within their organization and uses a slightly different installer path, which may or may not work.
Some people have had success with disk and permissions repair some have not. You can try running a disk and permissions repair. After the disk and permissions repair is complete, reboot the system and try to install again using either the online installer (get.adobe.com/flashplayer) or the offline installer, posted at the bottom of the Installation problems | Flash Player | Mac page in the ‘Still having problems’ section.
If these options do not work, I'd reach out to Apple support to see if they have a suggestion. If you do find a resolution to this, please let me know. I'll be happy to share it with people that encounter the problem in the future.
Maria

Hp photosmart b109n-z on a mac 10.5.8 having already installed on win7 2nd laptop - issue

Hi, I have a HP Photosmart Wireless B109n-z printer. I setup the printer for the wireless network and then the first laptop has windows 7 op system. I installed this in the usual way and it worked fine. However, i tried to install the printer on the 2nd laptop with a Mac 10.5.8 operating system. This can be found using the IP address in system preferences which i got from the other PC. The Printer at first printed a test page but not anything else. I have tried to re-install a few times but with the same result. I have also re-installed the driver and this had no success. Previously we changed the wireless provider and due to the short nature of the change (2 months) we never installed the printer on this. Ever since we changed back to the original wireless provider the issue has been seen. It should be noted that it is the same provider but different id. Any help on this would be great.

First, you will have to re-install the printer just like you did originally. Do not use the CD for software, get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Now that the printer is installed, on the Mac reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Click on the Default tab, not the IP tab. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess

In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input

Hello I have an I mac with Yosemite operating system. I installed a windows seven 64 bit on it. also i have a parallels desk top with version 10. if i run my windows without parallels my windows and my office is activated ,but if i run my parallel

Hello
I have an I mac with Yosemite operating system.
I installed a windows seven 64 bit on it.
also i have a parallels desk top with version 10.
if i run my windows without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
My problem is activating my windows and office through parallels desktop .
i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
all of my application in windows works properly through parallels desktop except
activation of office and windows .
I do not no any solution for my problem , i need for helps .thanks

It is not W10, it is the Technical Preview version of W10.
Search on the Windows forums (fora for the latinist) for activation in the TP W10.

CS5 install issue? only appears to be a frame instead of filling the scree on Mac osx

CS5 install issue? only appears to be a frame instead of filling the screen on Mac osx
When I click on the middle it takes me back to the desktop

Hi,
I would recommend posting this query in the Adobe Photoshop forum.
You will get a specific response relevant to this question.
Thanks

Software updates: my Mac OS 10.6.6 will not connect to update server and "no system permission to install"

Requesting an update to 3.6.23 also 7.0.1, so told "unable to update" because I do not have system permission to install. Who is/ are system administrator(s) and what accounts would give me permission to install ?

You may get faster and better answers if you post in the Acrobat forum, Acrobat. This is the free Reader one.

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Solved Mac Mini (late 2010) Blue Screen Hang issue

I posted several questions about blue screen hang and was able to fix my problem, after LOTS of work and searching in various forums.
I had been unable to use my computer for over a month; it was simply hanging at the blue screen, and that seemed to happen when my Finder.app had crashed, hiding all my document icons on my desktop, etc. I also had been having issues with Time Capsule and my backup Iomega disk, which is touchy.
When I tried a fix my icons had returned but I had been unable to use computer after rebooting, and I had tried every sort of key combo including trying to boot from the original install CD, etc., but nothing worked. I could not even reboot using original 10.6 software CDs, and was only able to log in Single User Mode and had tried many fixes with Terminal, and finally, this worked, two of the fixes I used are listed below.
It seems, in part, that resetting certain "privileges" worked.
This tip first tip is for Mac OSX 10.3 to 10.3.9 and even though I am on 10.6.8, I ran it, and it worked. THis is the original link location: http://support.apple.com/kb/TS1411
   1. Start up the computer in Single-User Mode.
   2. Type: in Terminal the command
     mount -uw /
   3. Press Return.
   4. Type (in Terminal, note space before mv)
      mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
     Note space between ".plist" and "preferences".
   5. Press Return.
   6. Type:
     mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
   7. Press Return.
   8. Type: reboot
   9. Press Return.
Then I followed up with this tip to "Reset certain privileges"
1. Start up the computer in Single-User Mode.
   2. Check the volume with fsck.
   3. Type: mount -uw /
   4. Press Return.
   5. Type: chmod 1775 /
   6. Press Return.
   7. Type: reboot
   8. Press Return.
When I rebooted, yayyyy! I was able to log back onto my computer, however, all icons were missing, again, so I typed this fix
/System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
I am not sure what 1775 means, but this fix got my computer back up, saving me at least a $150 bill at the Genius Bar.
When I typed those commands into Terminal, this is what returned, and seems to be some QXPscrpiting issue, though I have no idea what that is. and again, some Dropbox issues. If anyone has any idea what all those issues are regarding ScriptingCodes please let me know.
My-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOSFinder &
[1] 892
Rangdrols-Mac-mini:~ username$ -bash: /System/Library/CoreServices/Finder.app/Contents/MacOSFinder: No such file or directory
[1]+ Exit 127                /System/Library/CoreServices/Finder.app/Contents/MacOSFinder
My-Mac-mini:~ username$
Rangdrols-Mac-mini:~ username$ /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder & disown
[1] 894
My-Mac-mini:~ username$ 2012-08-25 19:37:10.594 Finder[894:903] Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found. Did find:
    /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: no matching architecture in universal wrapper
Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/QXPScriptingAdditions.osax" declares no loadable handlers.
Dropbox: Entered INJECT_pthread_entry
Dropbox: Installing event loop timer
Dropbox: proc: 0x11d171e53
Dropbox: upp: 0x11d171e53
Dropbox: InstallEventLoopTimer: 0x101341dd8
Dropbox: GetMainEventLoop: 0x101341c41
Dropbox: timer installed!
Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
Dropbox: dlopen returned: 0x11bb12090
module initializer in main thread?: 1

Great work, thanks.
As far as those errors, ypu have some missing OS components it seems.
And, before the mount -uw you really should've done this...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

Mac SE FDHD with dead HDD - boot and run from floppy drive alone? HDD type?

Hello!
I picked up a Mac SE FDHD a few months back - a model with a Superdrive and hard drive, as well as 4 MB of RAM. It came with a keyboard and mouse, but no floppies of any kind. Upon testing, I discovered that the hard drive did not work - the "flashing question mark folder" appears at startup, and the disk setup utility on the system 6 install disks I created using a more modern mac can't detect it. I don't hear HDD seek sounds either. Everything else works fine, as far as I can tell. The reason I want to use this old Mac is simply to boot it up and run a few favorite old programs (such as MacPaint and many old games), so I don't want to put too much money into it.
I discovered my parents still owned a old, 170 MB "LaCie Tsunami" SCSI external drive, used with our long-failed Mac II, and decided to use as the SE's boot drive, as a cheap workaround to avoid buying a "new" drive. However, after a rather odd turn of events (described below for information purposes), it turns out that the 50-pin SCSI drive itself functions, but in the process, I think I killed the enclosure. Unless this drive can replace the internal drive of the SE, (or get lucky and find a compatible drive somewhere), I'll need to run the SE from its single floppy drive.
I figure that since the original Mac had 128k of memory, a single 800k floppy, and no hard drive, and yet can still run OS 7, the SE should be able to run system 6 from floppies somehow. The question is how? Is there a tutorial online somewhere on how to set this up?
Furthermore, as far as the hard drive is concerned, is the SE's internal drive a standard 50 pin SCSI HDD, and thus likely compatible with the one from the LaCie?
Thanks for any suggestions, and for helping this "Old time Mac Newbie" out!
-Dan
PS: What happened to the LaCie drive - for information purposes:
WHen I attached to the LaCie drive to the SE and booted the OS 6 install disks, t worked - OS 6 installed to it just fine. However, it turns out that a "dormant" copy of Norton utilities reactivated when I booted to the SCSI drive, and encrypted the disk's partition table. (Why it was not encrypted BEFORE installing and booting OS 6, I don't know) Having not used the drive for 17 years , and thus not knowing the password, I had to reformat it. I have a Sawtooth G4 with an Apple SCSI card - but no cable that would go from the PCI card's SCSI port to the external enclosure. THus, I removed the drive from the enclosure, mounted it in the G4 internally, and formatted it as Mac OS Standard (with OS 9 drivers) using Mac OS 10.3. Upon re-installing the drive in its SCSI enclosure, I found that it no longer works - Norton was erased, but the SE gives me a "Sad Mac" icon upon boot. Furthermore, after borrowing the correct SCSI cable, I found the enclosure now kernel panics my G4 when attached. The drive itself, when mounted internally in the G4, still functions perfectly. Thus, it seems that either the enclosure is dead, or something about OS X's reformat is renders the HDD incompatible with the enclosure...

"I removed the drive from the enclosure, mounted it in the G4 internally, and formatted it as Mac OS Standard (with OS 9 drivers) using Mac OS 10.3."
I just re-checked Disk Utility's format options under Panther and only see "Mac OS Extended (Journaled)" or "Mac OS Extended." I don't see an option for formatting Mac OS Standard. Are you certain that you formatted the drive as a Mac OS Standard (HFS) volume? If it's a Mac OS Extended (HFS+) volume, that would explain why it won't work when connected to the SE. When using external SCSI enclosures having a hard drive or optical drive, I always opted to connect an "active" SCSI terminator to the unused SCSI port on the enclosure. It seemed to provide stability, because I never had a problem with any of them. Does the LaCie enclosure have a built-in termination switch or do you plug in a terminator to the opposite SCSI port on the back? As for installing/using the 170 MB hard drive in the SE, it must have a jumper installed on its TE pins, if it's the last device connected to the SE's SCSI ribbon cable. Additionally, the HDD must have a unique SCSI address, The factory default is usually 0, which doesn't necessarily require a jumper. If another address is desired, a jumper or two installed across specific pins will accomplish that. If the LaCie enclosure had a switchable SCSI address button on the back (you change it by pressing in with a ball point pen), there were small wires from it that were connected to the drive's address pins in a specific way. Did you disconnect/re-connect these when you re-installed the drive in the enclosure? Also, if the enclosure has a termination switch, did you re-connect its wires to the drive's TE pins?

Mac SE FDHD System 7.5 Install Issues

Similar Messages

Maybe you are looking for