MACBOOK 1.8 Mhz: Too limited for playing games in Windows?
I’m having a terrible time trying to play games in mi MacBook 1.8 MHz, in Windows, using the last version of bootcamp and 1GB of RAM. Some games don’t start; others crash during the execution, and with others, the whole windows crashes and got restarted.
I've reviewed many posts sent to the BootCamp forum, looking for a solution, but it seems those problems don't affect to the Macbook PRO users.
It seems that our Video Card (the MacBook Card) it's too limited, compared with the PRO video cards (a video memory problem or something related).
Has anyone had similar problems? Have you found any solution?
Thanks.
Macbook Mac OS X (10.4.7)
the MacBook is hampered by a low-end graphics solution that relies on shared RAM instead of its own VRAM (although it has 64MB VRAM). About the only improvement you can make is to max-out your RAM to 2GB. Even then, you may not be very pleased, and many games may not work at all. Check the specs on the games to see how they handle the Intel GMA 950. Upgrading to 2GB is not cheap and (IMHO) not worth the $ just to get better gaming performance. The MacBook will never be adequate for that purpose.
Good luck!
MacBook,G5 iMac,15PB,G4 iMac, G4 QS, AX, 3G iPod, Shffl, nano,shffl Mac OS X (10.4.7)
Similar Messages
-
Macbook Pro 2012 gets extremely hot when playing games on windows par.
So im just playing some games like BF4, Skyrim, etc and all of a sudden studder, the metal heats up, and whats missing? The fans! They dont even bother to turn on to keep things cool like on the OS X side.
Anyway to get the fans running like they do on the OS X par? I dont want to overheat my mac.
ThanksI can't tell if your Mac is getting too hot without knowing the actual temperatures, but they do run hotter in Windows, hottest with games.
But reinstalling the support software should eliminate that from the puzzle. -
Which Part of windows 7 should I use for Playing games.
I have heard that Windows 7 Home Premium is best For playing games
can you tell me which one should I install in my MacBook Pro
& Please give me the link For it...I don't think one version is better than the others for games, but you can take a look at comparison chart.
http://www.sevenforums.com/tutorials/14422-compare-windows-7-editions.html -
My macbook pro resets when playing games in windows
I have a macbook pro 2011 and I installed windows with boot camp. when i play games in windows after about 1 hour or so the system resets. why? I dont have any games installed in macintoch so I dont know if it has the same problem in macintoch too.
how can i check these in windows? can u help plz?
-
What is the best program for playing games,dics,3d settings such as "groove setting"
what is the best program for playing games,dics,3d settings such as "groove setting"?
Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G. -
SQL Developer Script Output too limited for student - how to increase?
I'm just a student trying to migrate from notepad and SQL Plus to using the SQL Developer for the comprehensive course project. Unfortunately, the script output is way too limited... it only reports a fourth of my last assignment's results - not enough to use in the project. How specifically can this be increased. I have version 1.1.0.21 running on Windows XP on a laptop with 512k memory.
Thanks much for any/all assist. I don't want to go back to notepad!!Thank you for the advice, but I had tried that. My script is 305 lines counting blank lines and the SQL developer displays only about 35 lines of results corresponding to 58 lines of input. When I run the same script in SQL Plus in a console window using the @filename command, I get the entire output.
My input and output follow:
Input:
spool project-test-out.txt
prompt 'name'
prompt 'Assignment X, parts 2b - 2h and 3a - 3b '
create table Customer (
CustID Integer,
Name Char(10),
State Char(2),
primary key (CustID) );
create view CustID_List (ID_Cust) as (select custID from Customer);
create table Inventory (
PartID Integer,
Item Char(10),
Cost Float,
OnHand Integer,
primary key (PartID) );
create table Invoice (
InvNum Integer,
InvDate DATE,
CustID Integer,
primary key (InvNum),
foreign key (CustID) references Customer);
create table Invoice_Item (
InvNum Integer,
PartID Integer,
Quantity Integer,
foreign key (InvNum) references Invoice,
foreign key (PartID) references Inventory);
insert into customer values ( 101, 'Kerry', 'MA' );
insert into customer values ( 102, 'Edwards', 'NC' );
insert into customer values ( 103, 'Cheney', 'TX' );
insert into customer values ( 104, 'Bush', 'TX' );
insert into Inventory values ( 1, 'Boots ', 149.95, 6 );
insert into Inventory values ( 2, 'Spurs ', 12.95, 24 );
insert into Inventory values ( 3, 'Buckle ', 19.95, 4 );
insert into Inventory values ( 4, 'Hat ', 60.00, 12 );
insert into Inventory values ( 5, 'Holster', 75.00, 8 );
insert into Inventory values ( 6, 'Saddle ', 350.00, 2 );
prompt 'Part grad 3b - unsatisfying solution, limitations of Oracle 10g Express'
prompt 'After many trials, found oracle discussion on web stating that'
prompt 'Oracle 9 does not allow subqueries in the trigger WHEN clause.'
prompt 'What a pain. Thus the solution here has become rather inelegant.'
prompt 'The trigger and following select statement are byproducts of various'
prompt 'simplification attempts, none of which worked.'
select ID_Cust from custID_List;
create trigger Invoice_CustID_CK before insert on Invoice
REFERENCING NEW AS newCustID
FOR EACH ROW
BEGIN
if (:newCustID.CustID = 205 )
-- {{want line below but it generates error of: subquery not allowed in }}
-- {{this context }}
-- if (:newCustID.CustID NOT IN
-- (Select ID_Cust from CustID_List))
then :newCustID.CustID := NULL;
end if;
END;
run;
show errors trigger Invoice_CustID_CK;
insert into invoice values ( 201, '01-Aug-2006', 101 );
insert into invoice values ( 202, '02-Sep-2006', 101 );
insert into invoice values ( 203, '05-Oct-2006', 103 );
insert into invoice values ( 204, '07-Oct-2006', 102 );
insert into invoice values ( 205, '09-Oct-2006', 205 );
insert into Invoice_Item values ( 201, 1, 1 );
insert into Invoice_Item values ( 201, 2, 1 );
insert into Invoice_Item values ( 202, 5, 2 );
insert into Invoice_Item values ( 203, 1, 2 );
insert into Invoice_Item values ( 203, 2, 2 );
insert into Invoice_Item values ( 203, 3, 2 );
insert into Invoice_Item values ( 203, 4, 2 );
insert into Invoice_Item values ( 204, 4, 2 );
insert into Invoice_Item values ( 204, 1, 1 );
select * from invoice;
select * from customer;
select * from invoice_item;
select * from inventory;
prompt 'Preparation for part 2b - create view showing onhand and starting inventory'
alter table inventory add (start_inventory integer);
update inventory
set start_inventory = onhand;
create view inv_changes as
select partid, sum(quantity) as sales_by_id
from invoice_item
group by partid;
create table inventory_invoiced as
select inventory.partid, item, cost, onhand, start_inventory, COALESCE (sales_by_id, 0) as sales_by_id_NZ
from inventory left outer join inv_changes
on inventory.partid = inv_changes.partid;
select * from inventory_invoiced;
update inventory_invoiced
Set
onhand = onhand - sales_by_id_NZ;
select * from inventory_invoiced;
prompt 'Part 2b - What item has the least on hand inventory after processing the invoices?'
select item
from inventory_invoiced
where onhand = (select min(onhand) from inventory_invoiced);
prompt 'Part 2c - How much does customer 101 owe?'
create view cust101_orders as
select distinct partID, quantity
from invoice_item, invoice
where invoice_item.invnum IN
(select I.invnum from invoice I where I.custid = 101);
select * from cust101_orders;
select sum(quantity * cost) as cust101_bill
from cust101_orders, inventory
where cust101_orders.partID = inventory.partID;
prompt 'Part 2d - Which customer has the biggest bill?'
prompt ' desirable solution is to do part 2c as a general case '
prompt ' using a stored function such that the custID is passed '
prompt ' to the function. Unfortunately, neither function below '
prompt ' compiles. First case trips on creating the view. Second'
prompt ' case being arewrite without a view - ifit even works - '
prompt ' trips on the complicated select'
create or replace function ind_customer_bill
(ind_customer_ID in integer)
return Float
IS ind_total_bill Float;
begin
create view cust_orders as
select distinct partID, quantity
from invoice_item.invnum IN
(select I.invnum from invoice I where I.custid = ind_customer_ID);
select sum(quantity * cost) into ind_total_bill
from cust_orders, inventory
where cust_orders.partid = inventory.partid;
drop view cust_orders;
return (ind_total_bill);
end;
show errors function ind_customer_bill;
create or replace function ind_customer_bill
(ind_customer_ID in integer)
return Float
IS ind_total_bill Float;
begin
select sum(quantity * cost) into ind_total_bill
from inventory, (select distinct partID as interim_partID, quantity
from invoice_item.invnum IN
(select I.invnum from invoice I where I.custid = ind_customer_ID))
where interim_partID = inventory.partid;
return (ind_total_bill);
end;
show errors function ind_customer_bill;
Prompt 'part 2d continued using shameful brute force technique'
select * from cust101_orders;
create view cust101_due as
select sum(quantity * cost) as cust101_bill
from cust101_orders, inventory
where cust101_orders.partID = inventory.partID;
create view cust102_orders as
select distinct partID, quantity
from invoice_item, invoice
where invoice_item.invnum IN
(select I.invnum from invoice I where I.custid = 102);
select * from cust102_orders;
create view cust102_due as
select sum(quantity * cost) as cust102_bill
from cust102_orders, inventory
where cust102_orders.partID = inventory.partID;
create view cust103_orders as
select distinct partID, quantity
from invoice_item, invoice
where invoice_item.invnum IN
(select I.invnum from invoice I where I.custid = 103);
select * from cust103_orders;
create view cust103_due as
select sum(quantity * cost) as cust103_bill
from cust103_orders, inventory
where cust103_orders.partID = inventory.partID;
create view cust104_orders as
select distinct partID, quantity
from invoice_item, invoice
where invoice_item.invnum IN
(select I.invnum from invoice I where I.custid = 104);
select * from cust104_orders;
create view cust104_due as
select sum(quantity * cost) as cust104_bill
from cust104_orders, inventory
where cust104_orders.partID = inventory.partID;
prompt 'and the answer to part 2d - biggest bill is'
select *
from cust101_due, cust102_due, cust103_due, cust104_due;
prompt 'Part 2e - What items were the most popular (most sold)'
select item
from inventory_invoiced
where sales_by_id_NZ >= ANY (
select max(sales_by_id_NZ) from inventory_invoiced);
prompt 'Part 2f - What was the value of the original inventory'
select sum (start_inventory * cost) as total_start_inventory
from inventory_invoiced;
prompt 'Part 2g - What was the value of the ending inventory'
select sum (onhand * cost) as total_ending_inventory
from inventory_invoiced;
prompt 'Part 2h - What customers did not place an order'
-- after some testing of the inner nest parts wherein the left outer join
-- results in a CustID_List entry 104 having a null entry in
-- invoice's CustID list.
select Name
from customer
where custID IN (select ID_Cust
from (select ID_Cust, CustID
from CustID_List left outer join invoice on
ID_Cust = CustID)
where CUSTID IS NULL);
prompt 'Part 3a - What items were not purchased by anyone'
select item as unpurchased
from inventory_invoiced
where sales_by_id_nz = 0;
prompt 'Part 3b - table modifications for invoices to have valid CustID'
prompt ' -- see 3b section at top of file, notes and trigger '
drop view cust101_due;
drop view cust102_due;
drop view cust103_due;
drop view cust104_due;
drop function ind_customer_bill;
drop view cust101_orders;
drop view cust102_orders;
drop view cust103_orders;
drop view cust104_orders;
drop table inventory_invoiced;
drop view inv_changes;
drop view custID_List;
drop table invoice_item;
drop table invoice;
drop table inventory;
drop table customer;
Output:
'name'
'Assignment X, parts 2b - 2h and 3a - 3b '
create table succeeded.
create view succeeded.
create table succeeded.
create table succeeded.
create table succeeded.
1 rows inserted
1 rows inserted
1 rows inserted
1 rows inserted
1 rows inserted
1 rows inserted
1 rows inserted
1 rows inserted
1 rows inserted
1 rows inserted
'Part grad 3b - unsatisfying solution, limitations of Oracle 10g Express'
'After many trials, found oracle discussion on web stating that'
'Oracle 9 does not allow subqueries in the trigger WHEN clause.'
'What a pain. Thus the solution here has become rather inelegant.'
'The trigger and following select statement are byproducts of various'
'simplification attempts, none of which worked.'
ID_CUST
101
102
103
104
4 rows selected
trigger Invoice_CustID_CK Compiled. -
Time Machine backs up one MacBook, but "backup is too large" for second
We have two MacBooks running OS 10.5.8 and both are connected wirelessly to Time Capsule. My daughter's laptop backs up fine. But my wife's laptop fails. It backed up one time when I first installed it, but never since. The error message I get is that the backup is too large for the backup volume -- 71.8 GB required but only 7.4 GB available.
My daughter's machine has a lot of photos and iTunes files on it, so it shows 141 out of 150 GBs are used up. The Time Capsule, which I understood to have 1 TB actually shows only 7.4 GB out of 463 GB are available.
And actually, when I try to manually run Time Machine on my wife's machine I get the really long Preparing message, and then the Time Machine Error message about not enough volume.
Should a machine with 150 GB capacity really be taking so much space on Time Capsule, and why the difference between the 1 TB advertised capacity and the <500GB of memory that actually appears to be there?
Does any of this suggest I need to restore the external or internal drives?Steve Hasler wrote:
We have two MacBooks running OS 10.5.8 and both are connected wirelessly to Time Capsule. My daughter's laptop backs up fine. But my wife's laptop fails. It backed up one time when I first installed it, but never since. The error message I get is that the backup is too large for the backup volume -- 71.8 GB required but only 7.4 GB available.
Does it make sense that it's trying to back up about 60 GB (Time Machine adds 20% for temporary workspace) from that Mac?
If so, see if it has the +Warn when old backups are deleted+ box checked in Time Machine Preferences > Options.
Click the Time Capsule in a Finder sidebar. If the Finder is in +Column View,+ you should see something like this:
|
except there should be two +sparse bundles+ listed in the third column. Right-click each one in turn, select +Get Info,+ and see what's shown for Size. Report back with the numbers. Also tell us if you have any other data on your TC, besides the 2 Mac's backups.
My daughter's machine has a lot of photos and iTunes files on it, so it shows 141 out of 150 GBs are used up. The Time Capsule, which I understood to have 1 TB actually shows only 7.4 GB out of 463 GB are available.
And actually, when I try to manually run Time Machine on my wife's machine I get the really long Preparing message, and then the Time Machine Error message about not enough volume.
That sounds like it's doing a "deep traversal," perhaps after a long time since the last backup, where it has to compare everything on the Mac to the backups, to figure out what needs to be backed-up.
Should a machine with 150 GB capacity really be taking so much space on Time Capsule
Sure. Time Machine will use up all the space available to it, then begin deleting the oldest backup(s) when it needs room for new ones.
and why the difference between the 1 TB advertised capacity and the <500GB of memory that actually appears to be there?</div>
It does sound like you have a 500 GB Time Capsule. The original ones were 500 GB; I'm not sure when the 1 TB version came out, and now you can get them with 2 TB. How old is it, and why do you think it's a 1 TB model? -
Using VMWare Fusion for playing games
Hi all and I hope you can help.
I have a recent 17" MBP with 2GB of RAM and a Core 2 Duo and I am trying to get some decent game software running on it. To do this I have installed VMWare Fusion, XP Pro and Crysis.
My problem is, I can get the game to run but it is VERY choppy and unplayable.
I have tried various virtual settings, including using 1 and 2 processors, 512mb to 1.5gb RAM but never getting it to run properly.
I am not trying to run it full screen or anywhere near high settings and have allowed the game to scan the hardware to find it's optimal settings and still no luck.
I know Crysis is quite a heavy load but with the hardware in an MBP it should be able to run it without many problems.
Am I being too optimistic trying to run Crysis or are there a set of parameters that are optimised for doing this?VMWare will also allow you to virtualize a boot camp partition.
The problem with virtualization and gaming is that, while you get direct CPU access and protected memory access, you do not get video access - so there is absolutely no video acceleration, it's all emulated or translated by the virtualizer.
You'll see a very minor CPU hit on anything that just using processor power or takes a lot of data (so long as you have enough physical RAM, and have enough RAM allocated to the virtual machine, to prevent disk swapping), but anything that needs video acceleration will suffer tremendously if it's virtualized.
In general, anything more than Solitare or Minesweeper, and you will want to use Bootcamp if there is no Mac OS X native version of the game (hooray for Blizzard, and all you other mac-native developers). I know the latest versions of VMWare and Parrallels all say they have new DirectX support, and Crossover has a version out just for gaming, but you'll disappoint yourself if you think these will do much more than just show the splash screen and a slide show for most games.
The good news is more game companies are starting to take Mac OS X seriously, and technologies such as Cider are helping developers port their code easier. But it's a long road, and the Macintosh has notoriously been spotty for gaming. -
Why ipad 3 I feel hot when used for playing games? does my ipad is broken?please help me.thanks
Please help me about my ipad 3 problem...when i use for playing a game my ipad feel warm.why?from fuad...
The CPU and GPU generate a lot of heat when you are playing graphic intensive games.
Remove the casing/sleeve if possible. -
I get a warning when I try to order that I should upgrade iphoto before ordering. However, my 2010 MacBook is too old to accomodate the iphoto upgrade. I just want to be sure that my book will print ok since i'm spending nearly $200 on it! Can someone answer yes or no???
For your information a 2010 13" Macbook can run Mavericks and thus the latest iPhoto 9.5.1.
This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
OT -
I tried to re-install games as well, restart my macbook but it did not work.I want to add that even before using bootcamp, the same thing happened to the screen.So, I do not think that there is a problem with windows 7.
Thank you in advanceDevice Manager which is in Control Panels
I strongly recommend AIDA64 to show everything, temps, fans, chips, drivers and versions
http://www.aida64.com/ Windows has better tools to show you every service and knick and cranny
https://discussions.apple.com/thread/2769294
http://realitypod.com/category/hacks-and-cracks/mac-hacks-and-cracks/
MacBook definitely uses Cirrus - probably iMac -
Zooming Too Limited for pdf files
Hi,
I have a couple of pdf files specifically of the New York City Subway and Bus system that I use (e.g. http://www.mta.info/nyct/maps/subwaymap.pdf). I have used these on my old Dell PDA with no problem. On the iPod touch, there seems to be an artificial limit on how far you can zoom in. Unfortunately it is not far enough to read and use the map easily.
Does Apple have any plans to address this (seemingly artificial) shortcoming?
Thanksthis forum is an user forum we know about as much about apples plans
as you do
i sugest
http://www.apple.com/feedback/ipodtouch.html -
HP Touchsmart IQ510 For Playing Games?
Hi my Fiancee brought one of these yesterday from comet and its brilliant, i just have a few questions.
I tryed to install The Elder Scrolls Oblivion and after it does the install and i press "play" it comes up with a error message saying...
"This application has failed to start because d3dx9_27.dll was not found. Re-installing the application may fix this problem"
I tryed updating the graphics card drivers and the game itself but no luck i was just wondering if there might be some simple solution i am missing because i know i could try more drastic options but too be honest i don't wanna play about too much with her brand new computer and if it does'nt work i ain't too bothered.
Also do you rekon some other games i might have more luck with or should i just forget about gaming on this computer even if the spec is good enough for most of the games i wanna play.
Kind Regards
Steven.
This question was solved.
View Solution.Try shutting off the Touchsmart software prior to playing a game:
To completely close the TouchSmart software tap Personalize , TouchSmart Settings , deselect Quick Launch , tap OK , and then Close .
"A riot is the language of the unheard." - Dr. Martin Luther King Jr. -
MacBook keeps crashing when I try to play games.
For quite a while now my MacBook has been crashing randomly when I try to play any sort of game. I'm planning on taking it in to get repaired once I'm done with my summer classes for college. Until then I was wondering if anyone knows what might be causing the issue. Thanks in advance for any help.
Here is an error report I get when I reboot it:
Interval Since Last Panic Report: 434427 sec
Panics Since Last Report: 9
Anonymous UUID: F42A960E-4D11-4E95-A184-06DB6D58E417
Sun May 22 23:50:15 2011
panic(cpu 2 caller 0x9cdc8f): NVRM[0/1:0:0]: Read Error 0x0061002c: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xc0000000 0x7f399000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x5c2b3cb8 : 0x21b510 (0x5d9514 0x5c2b3cec 0x223978 0x0)
0x5c2b3d08 : 0x9cdc8f (0xbe323c 0xc53840 0xbf23cc 0x0)
0x5c2b3da8 : 0xae85d3 (0x9128c04 0x84fc004 0x61002c 0x96de97)
0x5c2b3df8 : 0x1619251 (0x84fc004 0x61002c 0x6400 0x91707a4)
0x5c2b3e18 : 0xaacef6 (0x84fc004 0x97bf004 0x3800 0x95de818)
0x5c2b3e38 : 0xb5693e (0x84fc004 0x97bf004 0x1 0x0)
0x5c2b3ea8 : 0x9be771 (0x84fc004 0x0 0x0 0x0)
0x5c2b3f48 : 0x96f04f (0x84fc004 0x85417a8 0x67de861e 0x29f562)
0x5c2b3f78 : 0x22fd0d (0x91c2800 0x84fc004 0x5c2b3fc8 0x22796a)
0x5c2b3fc8 : 0x2a06dc (0x863ea0 0x0 0x10 0x9a94de4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.2.6)@0x1592000->0x19a6fff
dependency: com.apple.NVDAResman(6.2.6)@0x967000
com.apple.NVDAResman(6.2.6)@0x967000->0xc54fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x95a000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x938000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 401164785197
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x141c000, size 0x65536) - last unloaded 219773226765
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 36701078898
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.54
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 366
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.5.0d5
com.apple.GeForce 6.2.6
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AirPortBrcm43224 427.36.9
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IO80211Family 314.1.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500325ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000Could be heat related. Games tend to run up the temps on notebook computers. Make sure you are doing everything possible to allow the normal cooling funcitons to work to the fullest:
no running it in your lap or on pillow or blanket without using a lapboard.
no blocking the hinge area ion the back edge of the case
if using an external monitor, leave the built-in display open; "clamshell mode" traps heat.
Also use Activity Monitor to check for overactive background processes. Quit any user apps before running this test. Be sure to set its Show window to "All processes," and highlight the "%CPU" column to sort by CPU usage. Watch the list for about a minute--it's dynamic--and note any processes that consistently use more that 15-20 percent of the cycles.
Try turning off Dashboard. Restart and don't invoke any widgets; see if things are better. If so, then you need to guit Dashboard after using a widget. I use the widget DashQuit 3.0 to turn off all the widgets after use. Any widget that gets its info from the network can use up resources. -
I am not worried about playing on ultra or high or anything, I am happy with medium settings.
Thanks for your time.Yes, it should be adequate for your needs.
Maybe you are looking for
-
I wish to export several frames from iMovie as if they were images (like JPEGs or TIFFs). Is it possible to do this using iMovie, if so how? Any advice is greatly appreciated. I've already managed to 'add a freeze frame' to isolate the desired frames
-
Can you play movies from my iPad on a tv
Can you play movies from my iPad on a tv
-
Can iMac have an external video source hooked up?
Thinking of getting new iMac with its 24" monitor of goodness. But currently I have a 19" HD LCD tv with an HD cable box and a PC hooked up to it. Am I able to do anything similar with a new iMac? Use the screeen to watch TV on?
-
Spliting a large string using regular expression which contain special char
I have huge sting(xml) containing normal character a-z,A-Z and 0-9 as well as special char( <,>,?,&,',",;,/ etc.) I need to split this sting where it ends with </document> for e.g. Original String: <document> <item>sdf</item> <item><text>sd</text</it
-
Shrink system tablespace, or any laternate to reduce disk space usage!
Dear All, My Database is 11gR1 and Linux is the operating system. My System tablespace is consuming 24,000 MB disk space, The user i have created that contain all the objects is another tablespace. I just want to know is there any way to shrink syste