Macbook 2009 won't eject disk
My Macbook won't eject my CD. I've managed to get it in, but it won't eject, after trying pressing the eject button, holding it down while the computer restarts and the command prompt in Terminal.
Can any one help me please?
It's likely you'll have to get physical. This works but requires a few tries.
Take two playing cards. You'll use these as tweezers essentially. Use fairly stiff high quality ones.
Fish around gently and put one on top of the disk and one on the bottom of the disk.
Once in place keep sweeping in and pulling out as you hit the eject button trying to grab (with friction and sweeping motion) and pull it out. Don't fully remove the cards but keep sweeping in and out. It works on MacBooks and slot loading iMacs.
This is assuming your macbook still makes the eject sound like it's trying to push something out. I've gotten disks out that have had 2 disks stuck in as well as stuck disks from faulty drives.
IVe also also used business cards but playing cards work best.
Similar Messages
-
My Macbook Pro won't boot past the gray screen. I tried to reboot off the disk which did not work and now the machine will not eiect my disk. How do I get it out?
Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD -
it tells me that items may be in use and that i need to close applications, but no apps that are related to the disk contents are open. i can't eject unless i restart holding down the click button.
any help?Yes this can be a pain.... restart the computer and that should sort the problem for you.
Hopefully this is helpful or solved your problem. Consider rewarding some points!
Please see the "helpful" and "solved" button's on top off this message. -
MacBook won't eject disk during multi-disk installs, or after an install
Oy, will the problems never stop?
I have a dual-core MB 2.66 machine. I just put a fresh 500 gig drive and installed a retail copy of Snow Leopard. That seemed to go fine. Now I'm installing apps. And what's cropped up is that the machine refuses to eject disks after the install is complete.
I had to run the Adobe CS5 install twice because of this problem; luckily it ejected disks as it was supposed to the second time around. However, with iLife, iWork, Quicken, etc., after the install was done the disk refused to eject, and I had to hard-quit and eject the disk during next startup. And now Final Cut Pro is acting the same way...I use the install disk, then put Audio Content 1 disk in...it churns for two hours adding those files, then asks for Audio Content disk 2...but WON'T eject Disk 1!
I'm at my wits end. I never had these problems with Tiger...If I understand you correctly, you have two disks with Tiger and you installed a new disk on which you install Snow Leopard & apps.
Personally I would not have done this project that way. I would have used CCC or SuperDuper to clone one of the Tiger disks on to the new disk and then test to be sure the disk is working correctly first. A clone is a bootable copy of a system disk that contains everything from where the device used to make it.
Then and then I would install Snow Leopard. After installing Snow Leopard, you could use Setup Manager to copy over your data from the Tiger disk.
With the problemas you are currently having it might be easier to start over this way.
Allan -
Macbook pro 2009 won't accept disks.
Today I randomly try putting a disk into my drive for my printer and it wouldn't accept it. When I try putting it in it just spits it back out and does nothing. When I look at system profiler is says everything is okay. And when I tried restarting it the drive makes the sound like normally when it turns on. Does anyone know what kind of problem I'm having and how I could fix it? Thanks
Today I randomly try putting a disk into my drive for my printer and it wouldn't accept it. When I try putting it in it just spits it back out and does nothing. When I look at system profiler is says everything is okay. And when I tried restarting it the drive makes the sound like normally when it turns on. Does anyone know what kind of problem I'm having and how I could fix it? Thanks
-
When I press eject, it begins to eject, you see the slightest millimeter of the disc pop out, then it immediately gets pulled back in. I have tried everything (the keyboard button, dragging the desktop symbol into the trash, ejecting through disc utility, rebooting and holding down the trackpad, and even the code to make it manually eject). How do I get it out? I really don't care if the CD gets damaged in the process, just not my macbook.
Try these options (it may help if you orient the MBP so that gravity is an ally):
Credit Kappy.
Worst case, make an appointment at an Apple store genius bar. The technicians are good at this.
Ciao. -
Macbook Pro won't eject cd completely
When trying to eject a cd on my Macbook Pro I clearly hear the eject mechanism working as it should. But somehow the cd never comes out. Instead the drive acts as if a cd was just inserted and starts reading the disc.
I've tried various commands in Terminal, rebooting the computer while pressing the mousepad and even tilting the MBP in various directions while ejecting - all with similar results.
I'm getting pretty desperate. Suggestions anyone?My MBP just started doing this yesterday, I was able to eject the disc by holding my MBP upside down i scheduled an appt for later today to have my drive replaced
-
My MacBook Pro won't support disk
I have a disk with medical information. My MacBook Pro will not support this disk? What can I do?
There are apps to read the data Does the disk contain MRI, CAT, and/or Xray data? If so I have used OsiriX to read this kind of data:
It's available here:
http://www.osirix-viewer.com -
Hi all,
At work, we have an older FCP editing keyboard, I'm guessing from before the days of having a keyboard key to open/close the disk drive. It is, instead the power button. However, we have a G5, which means we have no idea how to open our disk drive (I just arrived here, and have no idea how the previous people did it).
Does anyone know another way to open the drive? Command E only works when there's a disk in there, I think.
Thanks very much for helping with such a silly problem,
CraigHere's some other options that I've found other than the ones mentioned (and yes, F12 works):
Ardiem
Hold down the mouse button (the left button for those of you with multi-button mice) while restarting the computer until the drive ejects.
If you have Toast, launch it then use the eject command (command-e).
Open Disk Utility, click on your optical drive, click the eject icon.
Restart your machine with the Option, Command, O, and F keys held down, and type the following into the prompt:
eject cd
mac-boot
Add an Eject menu to the Finder menu bar. The menu extras are located in your System\Library\CoreServices\Menu Extras folder. By double clicking on Eject.menu, an eject menu should appear in the Finder menu bar with an option to open the drive.
Sometimes people get too used to using F12 for Dashboard on other systems that already have an eject key so I've listed these alternatives for those that are interested. -
What should I do? Help!
Try here > Troubleshooting: My computer won't turn on
There's information for troubleshooting the magsafe power adapter at that link also. -
MacBook Pro 13" mid 2009 won't see hard disk
I'm changing a harddrive in a friends MBP, but it can't see the new harddisk. When attaching the new harddisk via USB it boots up perfectly, but when inserted in the casing and connected with the internal cable, it won't recognise the harddisk. When I put in the original harddisk in the casing and connected with the internal cable, it boots up. The disk is formatted as GUID and OSX Extended, journaled non-case sensitive as described.
What could be wrong?
I can't even see the internal new disk using boot and Option key.I have the (i think) the same problem with my 2009 13" mbp.
I push the power button, and I always push the option button, to see the boot options. Sometimes it see the internal hard drive, but i have boot issues. Other times the macbook pro won't se the hard drive anyways.
There is a 10% time, when is boot up normali, but when I start to use itt, i've got random beachball-s again, and again.
I create a bootable USB drive. Boot it up, and it see the hard drive, but when I go the disk utility and clikk to the disk, to create a new partition on a drive, or just erase it, i've got spinning beachball, and nothing happen.
The hard drive is OK, I checked it, in my other mac, thats why I think, i've got the cable problem too.
If anybody here think, this is the problem, please somebody help to, where can I buy a "strong" cable. I seen on e-bay a lot of MacBook Pro 2009 cables, but I dont know witch one is have a good value.
Many thanks.
Tom -
my macbook won't read disks, it justs ejects it immediately after insertion. It's a software based issue because I have my hard drive partitioned with linux mint, and on the linux os all disks work with no problems. It might be a red flag but I ran an executable file earlier labeled nocd. On the other hand though acouple days ago I inserted a disk for an apple tech utility and it just ejected the disk immediately as well which was the first time this happened, but i didnt think anything of it because I assumed the utility just wasn't compatible with my computer. I work at a help desk for a university so i thought maybe because it was not a university owned computer, I don't know, i'm not sure what my logic was there. but reguardless what i've tried was to kill backround processes involved with disk mounting and letting them respawn, there don't seem to be any unusual processes running on my system over all, after I killed those processes my home directory couldn't be located, I'm not sure if what I killed had anything to do with it, and don't really believe it did. I know the superdrive is not dirty or anything of that sort seeing as it read the disk fine in linuxmint. Any suggestion? thanks in advance for any replies
Apple Portables: Troubleshooting the slot load optical disc drive
-
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
DVD won't eject and MacBook pro 2,16 new
On a new Macbook pro 2,16 last generation the Disk won't eject, I have tried F12 and start but won't come out, anybody had the same problem the MAC try to eject the DVD but it won't come out
I would like to share with you my experience.
Only 2 hours after buying the MBP, I decided to re-install all the system to save space inHDD.
The second disk was stuck, I tried to pull it out without success.
I tried to see whet happened and i concluded that the CD hit the top of the slot.
So I decided to push with my thumb, reasonnably on the right hand side part of the computer (close to the trackpad) to move down the SuperDrive...An it worked.
I have to mention that I trid to find in the NET what was the fittings condition of the SD, and I knew there was some degree of feedom verticaly. I assumed it was just a matter of few millimeters. -
CD will not eject and MacBook Pro won't restart
CD will not eject and MacBook Pro won't restart.
Do a SMC reset, that hopefully should get you booting and while booting, hold the option/alt and trackpad button down at the same time. Once a row of icons appears and if the disk hasn't ejected via the trackpad method, then press the eject key on the keyboard until it does.
Click the arrow to boot up OS X.
http://support.apple.com/kb/HT3964
If this doesn't work, then take the machine in for service.
Maybe you are looking for
-
Too long printing process with Mail since last system update
Since the last system update about a week ago, it takes forever for Mail to process an e-mail to the printer (about 30 seconds). Most of the time, the emails only include text. This only happens with Mail. I daily use FileMaker Pro, Excel, InDesign
-
Fade to Black: Getting a weird colour distortion.
Question for the gurus: I'm on CS3 at the moment and working on some projects involving space scenes (stars and stuff). I have a black rectangle as my bottom-most layer and change the fill to a simple black and white radial gradient effect and the bl
-
I am having a problem in getting an updated help file to show up in the program execution. The help file is <program_help/index.html>, and shows up correctly in both the Resources and Products Groups in XCode. That is, after modifying only some text
-
How to make new item show in ASCP Plan workbench.
Item ATT.BVL3AHY is a new item without any demand. At item master, it is set as Planned so it is collected by ASCP. The item can be found in msc.msc_system_items with Plan_id -1. Plan id -1 corresponds to Collection. Planner needs to manuallty add pl
-
Self.close() or window.close() both not working in iOS8.0.2 safari
Both these function(self.close() and window.close()) are not working in safari. These methods are used to close the tab currently opened. So, if there is any workaround for this.