MacBook Pro does not boot from Windows/Linux CD

Hello,
I tried to install bootcamp, but experienced the following problem: I was able to use the bootcamp wizard to create the partition I need. Then the wizard ask to put in the Windows CD and forced the restart. While booting I only see a grey screen, nothing happened after a long time.
I tried different Windows CDs from XP SP2/3 to Windows Vista and Windows 7, also for a test a linux and dos boot CD. Always the same issue, only a grey screen. Booting from Leopard DVD works fine.
I already reset NVRAM, PRAM, SMC.
I can use and install all such CDs in Parallels in OSX. As Parallels supports booting Bootcamp partition in OSX, I installed there Windows 7, but with the limitation that OSX protects changing the MBR, this change could not be done, but Parallels was able to store such information itself. So I can use Bootcamp in Parallels.
Then I tried to set boot partition to BOOTCAMP in preferences, but then I get the error "no boot partition is found, please insert CD" when MacBook tries to boot. Of course, the MBR could not be written to the partition from Parallels.
I checked if all software, EFI, Superdrive firmware is up to date - and it is.
I am using MacBook Pro3.1, 3 years old with 4 GB of memory and SSD disk from OCZ.
Can somebody help with this issue?
MrBass

This isn't a direct answer to your issue but have you considered installing Wine so you can run the occasional windows app directly in OSX? It's a much more elegant solution IMHO. This avoids restarting all the time with Bootcamp and avoids crashing all the time (and the security risks) with Windows running.

Similar Messages

  • Macbook Pro does not boot from install CD, boots from non-apple live CDs

    This story begins with my macbook becoming entirely unresponsive while just sitting around with the desktop in focus. My current problems begin with the third of such freezing events. It felt like the hard drive had stopped responding since everything looked fine and I could move my mouse, but as soon as I attempted to access anything that depended upon the file system (ie everything not already in memory) that thing I attempted to access would freeze up as well. The only thing I can do when these happen is to force a shutdown.
    The three times I have had these problems I would be greeted with the flashing folder-and-question-mark. So, for the third time now I threw in a live CD I have and ran DiskWarrior and DiskUtility and fsck and everything I could possibly need to recover the system. Each of these programs ran through their routines and reported that it had either successfully made repairs or the disk needed no repairs and was A-OK!. S.M.A.R.T. reports that the drive is perfectly fine as well.
    Now, though, whenever I try to start up my computer I'm greeted with the normal grey apple startup image, the folder with the question mark, and also the prohibited sign (grey circle with a slash through it). This is the first time that running the disk repair programs has failed. Expecting a crashed hard drive or something equally fun I threw in the live CD again and attempted to recover my data. The thing is, I was able to navigate the file system perfectly with terminal and didn't even need any data recovery tools. So, at least my data has been safely backed up.
    I've tried booting into single user mode, but it seems that DiskWarrior helped my computer in an assisted suicide of sorts as boot.efi is sitting in a DiskWarrior recovered folder and the mach kernel has been entirely misplaced. Immediately I restart, throw in the first Macbook Pro installation CD, and hold down C in an attempt to reinstall the system.
    Here is my current problem: Whenever I attempt to boot from any of the installation CDs that came with my laptop, the laptop will begin to boot from the CD and show a grey screen as it begins reading from the disk, but before the spinning gear or grey apple appears the laptop simply restarts and attempts to boot from the disk again.
    This boot-restart process loops infinitely with every Apple-provided installation CD I have tried. The laptop never progresses past a grey screen, instead restarting and happily chiming. However, I have been able to boot from a non-Apple Live CD that I own every time I have tried; moreover, the hard drive is perfectly accessible and shows no errors from any program I run. When I hold option upon startup it shows the drive and lets me boot into it (but then the problems I have described pop up). I have also tried resetting PRAM and NVRAM with no success.
    Does anyone have any suggestions for how to boot into the live CD? Or would I be better off making sure I have backed up all of my data and then wiping the drive for a fresh install?

    I am having the exact same issue. I can only log into the system in safe mode. Holding down the Shift key when turning the machine on, until the log window appears.

  • Mid 2007 Macbook Pro will not boot from windows 7 DVD

    I'm trying to install Windows 7 64 bit on to my mid 2007 MBP. The DVD is valid, boots on a PC and I was able to load WIndows 7 into a VMWare fusion virtual machine on the very same system. I am convinced from those actions I have a good DVD and a good DVD drive.
    What happens is the screen goes black and "1. 2. and Choose type of DVD boot:" appear. ( I may have the phrase slightly wrong) No matter what I type nothing happens. I've gone into the boot selecter and same thing happens if I select the DVD.

    so you did not burn the DVD from ISO? that is what this usually is.
    the error and yours being 2007 says you are trying 64-bit and your Mac does not support 64-bit versions it has 32-bit ROM (and likely cannot upgrade past Lion when 10.8 Mountain Lion comes out).
    Windows 64 Bit Unsupported Macs
    What you are seeing is an EFI boot menu "select CD 1 or 2" yes.
    Select CD-ROM Boot Error Apple
    CD-ROM Boot Type when installing
    Install Windows 7 x64 Mac Select CD-ROM Boot Type

  • MacBook Pro does not Boot from the DVD

    If I want to boot from the DVD Insatll and "C" button, then you can hear noises as though it accesses the DVD but there is a gray background with the Apple logo and a spinning circle. I do so not in the Mac operating system but only in Windows.
    Please help

    "I do so not in the Mac operating system but only in Windows."

  • Macbook pro does not boot after upgrading ram

    I have a macbook pro late 2011 which runs with mavericks operating system . I have tried to upgrade my macbook to 8Gb. Macbook does not boot when the two ram slots are filled with 4GB ram but runs well when the slots are filled with 2GB ram. When i try them individually with one slot of 2GB ram and another slot with 4GB they run perfectly which shows status ok in the RAM info. What could be the problem . 

    Around here, most of us recommend only Crucial and OWC for RAM because it's guaranteed to work with Macs and it's what most of us have. If I were you, I would return the RAM and look at purchasing RAM from either Crucial or OWC. If you can't get their RAM to work then you'll know that there's some trouble with your actual slots.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Macbook Pro will not boot from internal drive

    I have a macbook pro model indentifier: macbookpro 7,1. The system would not boot what I have tried is first running apple diagnostics and all test fine, I tried booting from a snow leopard cd to re-install and it would not boot from the cd, however it does boot from the techtool pro 6 cd. I did run the test in techtool pro and all check out ok.
    I removed the drive from the system and connected via usb to test and it boots fine from usb, put back internal and same result no boot. I did some research and I see that someone had a similar problem and it was the sata cable, but since the diagnostics test ok I am not sure that would be the problem.
    Any Suggetions, this is driving me crazy
    Thanks in advance
    Bret

    coffee would not HAVE to do anything except mechanically. It would not have any effect now since it has dried out, well short of corroding some components.
    Check the points where the HDD casing "meets" the Macbook casing. How much pressure is there?
    What about the pressure pins "pogo pins" are they all functioning?
    What about pressure on the cables?
    Please describe how it wont boot? What exactly does it do / happens

  • Wiped macbook pro will not boot from install DVD

    I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs.  The computer will not boot from the DVD.  I have booted holding down the C key and nothing happens.  I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
    How do I get it to open up the Utilities from the DVD to install the operating system?

    It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
    Exactly which MBP do you have, and what serial numbers are on the discs ?.

  • I made changes in the single user mode - now my MacBook Pro does not boot anymore.

    Hello apple support community,
    I made changes in the single user mode and my MacBook Pro does now not boot anymore. It displays a grey bar and the "work in progress" wheel. My intention was to change my admin password following these steps:
    http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
    however, I have to admit that there was a typo sneaking in - oops!
    Any idea how I can undo changes made in the single user mode?
    Thanks in advance for your support - I hope I don't sound to nooby
    Till

    Hello, Till1234.  
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article that I would recommend going through when experiencing this issue.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Cheers,
    Jason H.

  • Mid 2009 macbook pro 13" not booting from Western digital hard drive

    So i've gone ahead and purchased a Western digital 2.5 inch scorpio black 750gb 7200rpm sata 16mb internal hard drive to replace my critical status 160gb standard drive in my macbook.
    I have followed a guide using a usb 2.0 enclosure, with my new hard drive then carbon cloner which does allow me to clone a copy of the existing hard drive, but... when i boot up the macbook holding the option key i get the external hard drive which i can select but then i go into a os x utilities screen and does not boot straight to finder.
    I get four options and one of them is disc utilities, so assuming this process in't as straightforward as i'm led to believe?
    I have partitioned the new hard drive with guid for intel macs so pleae can anyone help me before i just give up and take it to my local apple store?
    Thanks matt.

    I have just solved this problem, with a fresh head this morning i realised that the external drive was empty and the cloning process didn't complete for some reason?
    Anyhow i ran the clone again and booted externally which worked so then replaced my old hard drive with the new scorpio black and wow what a difference! I had beachballing before as my old drive was critical but now with the with the new speed 7200rpm drive its flying, very happy:-)

  • MacBook Pro does not boot when 'cold', Windows 7 on the other hand boots without any problem

    Hey everyone,
    I have a strange problem with my MacBook Pro mid 2009 13" running OSX Mavericks. For more than a year I have trouble booting my laptop. A 'cold' start (a fresh boot) usually ends with the prohibition sign on a grey back ground (starting in verbose mode results in the error message that the main drive could not be found). So far so strange.
    I have Windnows 7 installed as a bootcamp partition. If I start the laptop with Windows booting is no problem and Windows runs smoothly (what a terrible world we live in). If I let the laptop run for let say 10 minutes and restart the laptop Mac OS starts without any problems. (It doesn't work if I immediately restart after windows booted; also reinstalling Mac OS as a clean install from an external medium did not change the problem; disk utility always finds something to repair but neither discpermission repair nor disk repair got rid of the problem).
    As an additional comment a WD 500GB Scorbio Blue replaced the original hard drive about a years ago. I had no problems with the hard drive initally and I can't really believe that there is a problem with the hardware, I mean, why does Windows start and Mac OS doesn't?
    Thanks for your time and help!
    Marco

    This isn't a direct answer to your issue but have you considered installing Wine so you can run the occasional windows app directly in OSX? It's a much more elegant solution IMHO. This avoids restarting all the time with Bootcamp and avoids crashing all the time (and the security risks) with Windows running.

  • My MacBook Pro does not boot

    Dear forum
    I need some support.
    I have upgraded my MacBook Pro 2.2 to Leopard. Defined a Vista 32 Home Premium (original) Bootcamp partition. Everything has worked fine till yesterday. Now there is no way to boot the sistem anymore. If you select Mac boot it stays with the grey screen forever. If I try Windows boot it tries to go back to Mac and does not start.
    No chance to start in safe mode!
    I am really disappointed as I need to recover some files and I am not able to find any way.
    Can someone support me?
    On the other MacBook Pro no issue at all with Bootcamp and same configuration.
    Thanks
    Luca

    What can I do now?
    I wish I knew.
    If you have Apple Stores and Apple Geniuses in Germany, I would go see one.
    Otherwise, at least you can boot from the Leopard DVD. You said you needed to recover some files. I hope the following helps you do so; I have not tried this myself. You will need either a flash drive or an external hard drive, depending on the size of the files. You will also need to be reasonably proficient with Terminal so here are some tips. You open the Terminal from the Utilities menu after booting from the Leopard DVD, just like you did to open Disk Utility. (You might need Disk Utility to mount your flash drive or your external hard drive; I'm not sure.)
    Terminal tips:
    0. You will see some '\ ' in the following, because a space in a file name has to be escaped. Tab completion (tip 2) will automatically put in the backslashes as needed.
    1. The ls command lists files. So, for example,
    ls /Volumes/Macintosh\ HD/
    will list the contents at the root ('/') of your hard drive.
    2. *Use tab completion* to save yourself LOTS of typing. For example, to enter the previous example, you could type "ls /Vol[TAB]Mac[TAB]" where [TAB] means the Tab key. Tab completion only works if the file exists. If the tab completion doesn't seem to do anything, it may be because you haven't yet typed enough. Hitting tab again will show all possible completions to what you have already typed.
    3. cd changes directories (or folders). So typing
    cd /Volumes/Macintosh\ HD/Users/marmorix/Documents
    will get you to the Documents folder of your home folder (assuming that your short user name is "marmorix"), thus perhaps saving you some typing if that is where the documents you wish to save are.
    4. . is the current directory. .. is the directory one up. So if you typed in the cd command of the previous step, then .. is the same as /Volumes/Macintosh\ HD/Users/marmorix/
    5. cp copies files or directories. The 'p' flag preserves permissions, the 'i' (interactive) flag prevents you from accidentally overwriting files, and the 'r' flag copies recursively. So for example,
    <pre>cp -pir . /Volumes/External\ Hard\ Drive/SaveMyDocuments</pre>
    will copy everything, including subfolders, in the current directory to a folder named SaveMyDocuments on the external hard drive, if the name of the volume on the external hard drive was "External Hard Drive". (If necessary, you can learn the name of the volume on the external hard drive using tab completion.)
    6. Unlike when you boot from the hard drive, the root directory when you use Terminal from the Leopard DVD refers to the Mac OS on the DVD, and so '/', etc. are on the DVD. This is why most of the previous tips referred explicitly to '/Volumes/Macintosh\ HD', which is your actual hard drive.
    7. man is how you learn (more than you wanted to!) about commands. For example, man man will tell you about the man command; man cp will explain more about the copy command; and so on.
    I hope these tips help you at least recover your data. I fear that the failure of repair permissions means that there is something seriously wrong. So let us know if this works, because if this does or does not work, then we will have at least one more piece of data towards figuring out what is wrong and how/if we can fix it.

  • Macbook Pro does not boot - how can I recover files of HD???

    My Macbook Pro 2.16 ghz is 1 year and 42 days old. It is used for a few hours a day (on average two). Since lunchtime it has refused to boot up. I have been through the manual, reseated ram, turned my fingers into elastic rope trying various key combinations, and generally fumed and raged. But now I need to get the data from the HD mainly word docs and pdf files over to a Windows machine. What options are available that work? Is there any recovery software that I can load on the PC that will read the mac disk for instance?

    Welcome to the Forums!
    Ummmm....did you try inserting your Install DVD 1 and booting with the c key held down? That will boot from the optical disc, instead of the hard disk. You'll see the welcome screen, select your language, then from the Utilities menu select Disk Utility. Does your HDD show up in the list? If yes, click it then click Repair Disk.
    If the HDD does not show up (i.e. does not mount), post back.
    As for your files, there are Mac programs to recover them (Data Rescue II, for example). You'd need to buy the software, install it on a recovery DVD (using a friend's Mac?), and have an external drive (in a Mac OS format, I susect) to recover the data to. I'm not aware of any software on the PC side that will allow you to do file recovery on the Mac.
    Sorry for your troubles!
    For the future (even if the above steps solve your problem), you should consider an external FireWire HDD and a regular backup strategy (I use SuperDuper, very easy, and having a recent backup = peace of mind!).
    Hope this helps...

  • MacBook Pro will not boot into Windows 7.

         I am sorry if this has been discussed before, but I could not find a correct answer.  I recieved my 15" MacBook Pro last week, and I swapped out a few of the inside's for upgrades.  I replaced the optical drive with a NewMode 2nd HDD Caddy, and a Hitachi 750 GB 7200RPM HDD.  I also upgraded the RAM to 8GB.  I bought the HDD so I could put Windows 7 on it.  I went through the bootcamp process, partitioned 90 GB of my 2nd drive, and rebooted with my Windows 7 CD in my external CD drive.  When it rebooted, it went to this black screen with a blinking cursor.  I have tried many different ways to boot to the CD; like rEFIt and option key with no luck.  It is not the disc because I have tried many bootable discs and none of them have worked.
    Any help would be appreciated Thnx.

    You cannot boot Windows from an external device. The Windows installer and Windows itself must be booted from an internal optical drive.
    You can do some Google searching on how to create a bootable USB flash drive for installing Windows, but they all will require access to a Windows machine.
    The new Boot Camp Assistant does provide an option for creating a bootable USB flash drive, but I don't know if it requires that the Windows installer DVD be in an internal optical drive.

  • MacBook Pro will not boot from Apple Logo Screen - No HD recognised

    Hi all,
    I encountered a problem booting my mid 2010 MacBook Pro yesterday. I currently run OSX Mavericks.
    The computer has been great for the last 4 years and has never encountered any major issues. Yesterday I dropped it on carpet while sitting on the couch (it was a VERY small impact) and I continued to use it for a few hours. I did a safari update that night also. I then closed the lid which would have put it to sleep. My flatmate asked for a file later that night, I took his USB and stuck it in my computer, THEN opened the lid. The computer never booted up (It was stuck on the apple logo with the spinning thing underneath it). After doing this for a minute or so the computer would turn off. After multiple attempts the same thing happened.
    I read many posts on this - I am assuming that the problem occured because I brought it out from sleep with a USB in the side. I have taken the following steps to attempt fixing the problem -
    *safe boot - no luck
    *reset PRAM - no luck
    *recovery mode boot - getting disk errors.
    In recovery mode boot I cannot reinstall a new OSX version because there is no internal HD disk mounted. It only gives me the option to install OSX to the Recovery HD, which is locked.
    Using Time Machine backup wont work as there is also no Internal HD detected to load to.
    In Disk Utility it no longer has 'Macintosh HD' - It is further labelled 'disk0s2'. I cannot verify, repair OR erase this disk.
    Can someone PLEASE assist with what I might be able to do. I need to somehow mount/unmount/detect my internal HD. I am happy to detect it and format it as I have Time Machine backups on an external HD.
    I am no mac genius although I do learn quickly. If I can get assistance It would be very appreciated. I have a feeling I can sort some issues out using Terminal although I need command assitance?!?
    Apologies for the long post although I want to outline everything I have done to attempt to isolate the problem.
    Thank you all in advance.

    Does your flatmate have a Mac as well?
    If so, you could always get a 8GB+ USB stick, download Mavericks using your Apple ID and use DiskMaker X to create a bootable installation disk on the USB stick. Then boot using the USB stick (hold down the option ey whilst booting to select it) and try to reformat your drive using Disk Utility and, if you're able, reinstall OS X on your machine and then restore from backup.
    The only hitch may be that your hard drive is dead and that you need to install a new drive. You'll know once you boot from the USB stick, though, if you can format the drive or not.
    Good luck,
    Clinton

  • Macbook Pro will not boot from any source after upgrade

    Hi,
    I have a late 2011 Macbook Pro - standard issue other than more memory as I recall. It has a 750MB hard drive with more than half still free. All the checks given below are done with the computer stand-alone with no hardware attached - other than the power cord and of course WiFi.
    2 weeks ago I upgraded to Yosemite having taken all the right precautions before upgrade - thanks to Take Control. It worked fine and I was getting a good experience until last Wednesday when I put it to sleep by closing the lid. Later in the day I opened it up again but only got a grey screen. After leaving it several minutes to see if it cleared I shut down by holding the on button for several seconds then tried to re-boot. The computer starts and gets as far as the grey screen then shuts down again after several minutes. Sometimes it will continue to restart after shut down and keeps doing this until I again hold the on  button in until it finally shuts down for good.
    I have two bootable drives - one is a cloned backup of the previous version and all the data, the other is an 8GB thumb drive with a bootable version of the Yosemite installer. For the record I also have a Time Machine backup and a second full clone backup and recovery drive on a Synology NAS device -  I just haven't figured out how to boot from this device as yet.
    I can get to the boot up selection screen (hold option key) and select an external drive to boot from but it makes no difference - I still get the same grey screen. Same thing if I use Command +R to boot from the Mac HD recovery partition.
    I have also tried to boot into safe boot mode (hold the shift key down). This seems to slow everything down but ultimately has the same result - a grey screen.The only difference I can see is that this grey screen does not shut down after a time. Seems to just continue until I shut it down manually.
    I can hold Command +V to remove the grey screen and see the action being written to the screen while logging on (white text on a blue screen) - up to a point.  After some time I just get the same grey screen and it shuts down after more time. I can also use Option +D (I'm told it should be just hold the 'D' key to do this but that has never worked for me and Option +D does) to get to the hardware check and I have run this both before upgrading and after having the problem. Before upgrading I got one error - 4ETC/1/40000002. I looked this up on the Internet and could find nothing specific to identify the problem and the general consensus seemed to be it was nothing major. After upgrading and running the hardware check again (after this problem occurred) it returned no errors.
    I have reset the PRAM with the same result as before - all I get is the is the Apple logo and a progress bar that increases to around 50%, then both disappear and I get just a grey screen. After a time the computer shuts down and then restarts again and goes through the same process.
    I've done pretty much everything I can think of and find in books and on the Internet. Hoping that someone out there will find this problem interesting and help me to resolve it.
    Tony

    Problem resolved. I took the machine into an authorized repair facility where, for around $30, I had it checked and the logic board replaced. Picked it up yesterday and seems to be working OK. No cost to replace the logic board even though the machine is over 3 years old. There seems  to be some sort of dispute with Apple over a class action that has worked in my favour. Great. I'm happy.
    Tony

Maybe you are looking for