Macbook Pro OS 10.6.8 & HP Laserjet 5100: Won't print
I have a macbook pro. Just updated to 10.6.8. I cannot print to my hp laserjet 5100. Printer pauses.
I have loaded HP 5100 series driver as per directions. No data is transmitted to printer. The printer is paused. It doesn't appear to be a cabling problem. It doesn't appear to be a problem with the printer itself. Could really use some help with this one. Appreciatively, reyo1
reyo1 wrote:
I have a macbook pro. Just updated to 10.6.8. I cannot print to my hp laserjet 5100. Printer pauses.
I have loaded HP 5100 series driver as per directions. No data is transmitted to printer. The printer show off line.
Similar Messages
-
My iPad is on the same network as the Airport Extreme. The HP printer is on the list of Airprint printers but I'm not using it as a wireless printer, per se, as it's hooked up to the USB port on the Airport Extreme.
I installed the HP ePrint app on my iPad. Unfortunately, the app could not find the printer either.
As mentioned earlier, I'm able to print wirelessly to the HP printer via my MacBook Pro.ApplePearApple wrote:
Since I'm able to print to the HP printer from my MacBook Pro using this configuration, shouldn't I be able to print to the printer from my iPad, especially when all of the devices are on/using the same network?
Not necessarily. AirPrint uses a protocol separate from the communication protocol used for the Extreme's USB port. The HP printer may disable AirPrint when its USB port connected to a valid device, which is my reason for recommending you use it wirelessly.
From AirPrint Basics:
AirPrint printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported.
AirPrint printers connected by Ethernet are supported in OS X.
You may get more competent assistance from HP. See this HP support forum topic: iPhone & iPad can't Airprint to p1102w LaserJet
HP's Mac support has always been miserable though. I have been much happier since I abandoned HP and started buying Brother printers. They just work. -
How do I take 300 dpi photos with my iPhone 4s?
And how do I export them to my MacBook Pro at 300 dpi to use as I want to print photos.
I have been using the standard camera on the iPhone and require 300 dpi to create photo books as the photos are resized according the layout.
Your time and assistance in appreciated.
ThanksThanks Tonefox!
After looking at a few of the links I found a mathematical equation that assisted me.
Inches = Pixels/DPI
eg: 3 inches = 300 pixels/100 DPI
Using this equation and the fact that iPhone 4s takes photos that are 3264 x 2448 I was able to work out the largest print I could make with 300 DPI.
Width 3264 pix/ 300 DPI = 10.88 inches
Height 2448 pix/ 300 DPI = 8.16 inches
Therefore, the largest print (with 300DPI) I can make of these photos is 10.88 inches x 8.16 inches.
Which is great!
So is it critical for me to change the dpi in say photoshop or does it not matter as long as I don't go above the 10.88 inches x 8.16 inches?
From what I can gather the smaller I resize the photo the higher the DPI and the bigger I stretch the photo the lower the DPI?
Further clarification will be much appreciated. Thanks -
Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?
Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton -
I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.
-
MacBook Pro turned off on its own and now won't turn back on.
MacBook Pro turned off on its own and now won't turn back on. Battery had 41% just before this happened and green indicator on power cord is showing, so it seems like it's charging. What should I do?
The led on the power adapter should be amber if it is charging. Green just indicates that it is supplying power to the MBP.
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
Hi guys, I recently got a new MacBook Pro with a USB Superdrive. A disc won't eject, does anyone know of a way to eject it? I'm in Morocco for the next 10 days so going to an Apple store is not possible. Any help would be gratefully received, thanks
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes. -
Just bought a Macbook Pro. I want a clean install so won't use a Time Machine backup but how can I install the software I bought from Apple Store? can I just delete it from the old machine that is going to someone else?
The ne
The new machine has Mavericks which is fine. And I will leave it as is. I don’t want anything from my old machine other than 2 apps that I will need on the new one. I want to be able to install those apps that I bought from the App Store onto my new computer. I assume Apple doesn’t want me to have the apps installed on 2 machines at the same time so I wonder if just uninstalling them from my old machine will release them for re-install on the new one. -
LaserJet 1020 won't print first document after powering up
My LaserJet 1020 won't print the first document it receives after powering-up. Print manager shows that the document is being sent, the printer makes noise like it's getting ready to print, but the document is never printed and I don't receive an error messages. If I send the document again the document prints as does every document there after.
I'm using Windows Vista Professional and the printer is connected via USB 2.0.Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
HP Color Laserjet 2605dn won't print the red color
My HP Color Laserjet 2605dn won't print the red color. It's comes out very light, barely a pink color. It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.
Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP. -
HP Laserjet P2055dn won't print pdf files
I have just hooked up a new iMac with Mac OS 10.9.5 and now my reliable HP Laserjet P2055dn won't print .pdf files anymore--it just hangs for hours. I am an academic and work 50% with pdf's. I tried to download a new driver from the HP site for all MAC OS systems 10.7 and up, but the message when the download was finished opened up in a little box that reads: "ljp2055_Firmware_Upd Image not recognised."
I've unplugged, plugged back in, turned off, turned back on countless times. Don't know what else to try?
Thank you.Hi john, I did some looking around and maybe try this page for some tips, sometimes the microsoft forums help me out dearly.
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/unable-to-print-pdf-files-with-wi... -
HP Laserjet P1006 won't print "Printer Offline"
My hp laserjet p1006 won't print and the error message says "printer offline". The printer does show up in System Profiler. The printer is on, and connected via USB. Ready light on printer is on. Sometimes the orange light blinks but is mostly off. I tried different USB ports (eliminating the hub) and switched out the USB cable. Restarted computer and printer, updated driver and repaired disk permissions. I recently switched to Snow Leopard but the printer has printed since I switched numerous times.
I had this problem 2 weeks ago and finally it fixed itself, but since a restart it doesn't work. Any suggestions?Ken Spiker wrote:
Yes, I just downloaded the Apple HP update 2.3. The driver that was showing in my Printer Setup Utility was 1.2.0.224. Now I downloaded and installed 2.3 but the Printer Setup Utility only shows 1.2.0.224. 2.3 is not listed in the driver list. Why is that?
2.3 is the version of the update, not the version of the driver.
According to http://support.apple.com/kb/HT3669, 1.2.0.224 is the correct version of the HP driver.
Final question: why do I have problems nobody else does?
People are having a variety of problems. It may be because of permissions, previous versions of the HP software that was installed and not deleted. Since there wasn't support for this printer on Snow Leopard until the 2.2 update, it's hard to guess what the issue was, but you're not alone - read some of threads here.
If you run into this problem again, delete the <hard drive>/Library/Printers/hp folder, delete your printer from Print & Fax, then run Software Update and re-add the printer.
Hope this helps. -
Suddenly, my HP Laserjet 6mp won't print. The icon says it's in use (but it isn't), at other times it says it's not connected (but it is). Help!
That page's troubleshooting for the "Filter failed" message worked out. I consulted the Wiki before but never found that exact page. I guess I didn't use the best search criteria. Thanks for pointing it out.
-
HP LaserJet 5100 Postscript network printer interface to Embedded system
HP LaserJet 5100 Postscript network printer interface to Embedded system.
I have the HP LaserJet 5100 Postscript Network printer and want to interface it to Embedded system designed by using the ARM Cortex microcontroller and TCP/IP stack is also ported.
Using the Windows XP, i am able to print test.ps file on the HP LaserJet 5100 PostScript Network Printer.
( copy test.ps \\print_server\Print_port )
i need the documents which will help me for same.
please help...It appears your printer is a commerical LaserJet printer.
You may get a better reponse by posting in the commercial LaserJet forums.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Maybe you are looking for
-
Is the following possible in OBIEE
I have a requirement: that runs like this - There r four dimensions (let's say d1, d2, d3, d4). There are also measures like m1, m2, m3, m4. I have got a requirement that a OBIEE report needs to be produced that has d1 columns at the left, one of (d2
-
I am trying to activate my program into my new computer (the old one was run over by a car) and it says I have exceeded my installations. It's Adobe Audition 3 (you can see I've been using it a long time) and I rely on it for work everyday. Please
-
Hi, I have a <af:inputFile> component which will upload only image file and render the corresponding image... It work with normal application deployed on weblogic server however when i use same taskflow as a part of human task in SOA BPM worklist...
-
Wrong assignment field (ZUORN) running MR08
Hi all, On SAP R/3 4.6b we run transaction MR01 with unplanned delivery costs. As we have some price differences, the FI document has a line with the right price diff. G/L account. This G/L account has its sort key field (ZUAWA) filled with code '013
-
need to figure out how to remove an unknown admin password on a mac. used the install disc with not luck. tried some commands in single user mode, no luck.