MacBook Pro won't stop thinking

my computer will start, and my home screen will come up, but the parachute won't stop spinning (thinking).  my Internet indicator won't come on most of the time, maybe every fourth time I start it.  can I manually restore it?

The first thing I'd do is boot to your install DVD (Cmd-C) or recovery partition (Cmd-R in case you're running Lion or Mountain Lion). Start Disk Utility and repair the disk and its permissions. With any luck, that will get your system running properly again. If not, we'll walk you through resetting the SMC and NVRAM.

Similar Messages

  • My macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas?

    my macbook pro won't stop making noise! It sounds like the fan but I'm not sure. Any ideas? It's really worrying me because I haven't had it for up tp 2months and last week everytime I switch it on it makes sooo much noise. And I treat like an egg so I don't understand whats going on.

    Hey,
    My friend had a very similar issue to yours. The issue came down to the pins of the MagSafe not meeting with the MacBook perfectly causing the lights and the transfer of power to be wacko. I'm not sure if this is issue that your experiencing, but its worth checking out the pins and the MagSafe area on your MacBook for debris.
    Troubleshooting Magsafe power adapters with stuck pins
    If that is all clear, then I would suggest you call AppleCare or take it in to an Apple Store to have it checked out.
    Tom

  • Macbook Pro won't stop syncing unplugged ipod 5

    I plugged my iphone 5 into my new macbook pro (with retina display) via usb port to sync it and back up itunes and all was well, all my music is now on my iphone and my macbook. No follow up issues. However, when i plug in my ipod 5, things started to go wrong. Backing it up wouldn't work at all and i couldn't sync ANY of my other apps with it and so after about 45 minutes, i gave up. I ejected my ipod and i thought everything was ok until every time i tried to shut down my macbook, i would get a notification asking if i was still willing to shut down my laptop even though itunes was still trying to back up with my ipod. I was confused and went to look at itunes and tried clicking 'Quit Back up' which didn't work as my laptop completely disregarded me.
    Then, I thought, maybe if i click sync ipod, it will realise that there is nothing plugged in and then it will quit. Not the case. When i clicked sync it actually started syncing my ipod but my ipod wasnt aware of it. On itunes on my macbook, it was mainly blank, not showing any of the backup options like it usually does while syncing and what not. This has been going on for nearly a week.
    Because backing up and syncing take up a lot of battery, my laptop has been reaching low battery in about 45mins-1hour of use. Itunes is refusing to let me quit and shut down my laptop even though i click to stop sync when it asks me. Itunes is constantly running in the background draining my battery life. I have now just plugged in the same ipod but my itunes has failed to recognise it. This is also stopping me from updating my software with the newest update.
    I don't know what i'm meant to do because i feel powerless and as a first time mac user, who, by the way, does nothing but surf the net and do schoolwork on it, i am very shocked by how quickly this has happened as i have only had this macbook pro for under 4 months.
    Hope this gets answered asap as this has been going on for about a week. Thank you

    The first thing I'd do is boot to your install DVD (Cmd-C) or recovery partition (Cmd-R in case you're running Lion or Mountain Lion). Start Disk Utility and repair the disk and its permissions. With any luck, that will get your system running properly again. If not, we'll walk you through resetting the SMC and NVRAM.

  • My MacBook Pro won't stop announcing the time in Japanese.

    It was funny at first but now I want it to stop.

    Hey TravisBickle,
    Thanks for the question. Let’s check your Date & Time preferences, and disable the “Announce the time” option:
    OS X Mavericks: Set date and time options
    http://support.apple.com/kb/PH14090
    1. Choose Apple menu > System Preferences, then click Date & Time.
    2. Do any of the following:
    - Click Date & Time, then choose to set date and time automatically or manually.
    - Click Time Zone, then select your city.
    - Click Clock, then make sure that “Show date and time in menu bar” is selected.
    If you want to hear the time announced, select “Announce the time,” then choose from the pop-up menu how frequently you want the time announced. If you like, customize the voice.
    Thanks,
    Matt M.

  • MacBook Pro won't stop rebooting. Options to get past the gray screen?

    I made an adjustment to sharing on HD and ever since then the MacBook is rebooting again and again. Any suggestions?

    Thank you for the response. I have tried starting in safe mode and it is not taking. The cycle continues to reboot after about a minute or two. Once when I tried starting in force OS X mode holding down "X" when starting I did get the scrolling text but then the prompt asked to exit or enter a command. Not knowing what command to enter, I typed exit. This did not resolve the problem obviously. I am supposed to get a call from an Apple person later this morning. I am hoping he/she can help.
    I am not sure I know how to get to Disc Utilities if I can't get past the grey screen. Any suggestions? Should I boot off of my system discs?
    Thanks again for your response.

  • Macbook Pro won't stop indexing!

    Hey yall ive had my MBP for right around 15 months and lately it was beachballing alot so i installed Onyx. Then it started freezing and BB'ing even more with Firefox. So i completly uninstalled Onyx and firefox. That solved the problem for the most part. Then it kept on BB'ing some more when using safari. So i did the repair permissions thing and now my MBP has been indexing for like 2 days and hasnt made in progress. I just want my computer back to where it was quick and did BB every five minutes. What do i need to do?

    I am in almost the same situation.
    The only differences are that I had gone in and tried to repair my volume. I did this once and it seemed to solve the problem. Then the symptoms came back and I did it again, but the second time it couldn't repair. So I reformated and reinstalled Lion, brought my system back with a time machine transfer. However the symptoms are back again now.
    I also did NOT uninstall Onyx or Firefox.
    Someone please help us both.

  • My Macbook Pro won't auto delete old TM files

    My wife's Macbook pro won't auto delete old files on the TM disc. I think it has to do with using a time capsule. I'd rather stop that and just use the WD Passport but how do I do that?

    Hi..
    My power cord has been trying to go out on me for a few weeks and tonight it just went capooey
    If there's a power issue on your Mac, it's doubtful uninstalling and reinstalling software will make any difference.
    Try Troubleshooting MagSafe adapters
    If the adapter is ok, try Resetting the System Management Controller (SMC)

  • My MacBook Pro won't connect to the Internet, but my phone and PC will.

    My MacBook Pro won't connect to the Internet. My iPhone has no problem doing so, and neither does my PC. I think it's something to do with my DNS, but I'm not sure. My network connections say that both my Ethernet or FireWire are failed. What's wrong with my MacBook? Is there a simple way to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Hi! My MacBook Pro won't start! HELP !!!

    Hi! My MacBook Pro won't start! I have tried everything I can think of like Safe Mode (doesn't work), Recovery (does not find Recovery Drive), Booting with OS Snow Leopard Cd (doesn't work)...
    I have really no clue about what to do now... I paid quite a lot of money for this computer and am pretty short of money nowadays! Would like to repair with help rather than having to take it to Apple Store.
    Has anyone had this same problem? 
    All I get is white screen + grey Apple and spinning grey disk...  it's 100% frustrating! Any help would be more than welcome since I think i've tried EVERY SUGGESTION on this Support Center and Youtube videos...
    This MBP is from 2011, runs on OS X 10.6.8
    I tried booting with OS X Snow Leopard CD, it didn't work!  (my cd player works! recognizes the Snow Leopard CD, but then never opens it... goes back forever to the with screen + apple and spinning disk)
    I don't care about the content, it's OK if i lose all DATA... I just want to bring this Mac BACK TO LIFE!
    When i run coomand on root# fsck -fy  --> RESULT = my HD was checked and seems to be FINE!
    Thanks

    Please make a Genius Appointment and take it in for service.

  • My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

    My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

    Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
    Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
    Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
    Quit and you should be able to install OS X now with your Apple ID and password.
    see
    http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

  • My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • MacBook pro won't boot up Keeps turning off

    MacBook pro won't boot up.  When power button pressed the white screen w apple comes on w progress bar but shuts off before bar completed. If I move cursor or hit buttons it boots but will turn off if cursor stops Moving or stop pushing buttons.  Just started happening.   Ran hardware test and all shows ok.  Any ideas??

    Thanks for all the help; however, I still continue to have problems booting off of any other media.
    I've tried the Apple CD w/ no success - I made an image of the apple cd and restored it to a USB drive, and it won't boot. I've tested both methods on another mac, and both options boot fine.
    I'm going with my last restort here and am going to install OSX on a portable USB HD, and try to boot off of that (no clue if it will work given the outcomes of the other things I have tried). From there I'm going to backup the HD, and try DW as suggested.
    Any thoughts as to why the mac refuses to boot off of any other media? It always boots halfway and then tells me I need to shutdown my mac.
    Thanks again,

  • MacBook Pro won't start at all - clicking noise with black screen

    Early 2011 MacBook Pro won't start: makes clicking noise after power button is held down, but no screen movement and after click, sounds like computer just stops working. Already did a SMC reset, and undid battery to try to run on charger power only. Same result every time. Also, my Apple Care expired 3 days ago. A few weeks ago had to repair a disk using Disk Utility because there was a discrepancy between how much storage was in the drive versus how much was actually being used.

    You likely have the problem that many of us 15" and 17" 2011 models are having: a faulty soldering GPU and as discussed here -> https://discussions.apple.com/thread/4766577?tstart=0. It usually, but not always, beings with screen glitches and then gets to the point where the machine will simply not boot.
    It's  ashamed that you're not longer under AppleCare which would have, at least, got you a new logic board. A new logic board, however, doesn't usually fix the situation - only a BGA Reballing of the GPU seems to have long-lasting fixes.
    Read through a few the articles (not all of them!) and make the decision yourself - and then make the decision about whom your going to contact.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Macbook pro optical drive stopped working after installation of mavericks

    macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

    I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

  • After 10.7.4 update macbook pro won't sleep

    after 10.7.4 update, macbook pro won't sleep.

    Test after each of the following steps that you haven’t already tried:
    Step 1
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
    Step 2
     ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
    Step 3
     ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
    Check all printers for unfinished jobs. Deal with any you find.
    Step 4
    Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
    Step 5
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
    Step 6
    Boot in safe mode and log in. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 7
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 8
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

Maybe you are looking for