Macbook turns off while installing
Some days ago I bought a used macbook. It had Snow Leopard 10.6.8 installed. I wanted to repartition and make a fresh installation. I made it but when the half of installation was ready it suddenly turned of... i tried it 4 or 5 times and the same happens. I dont know what to do
I would really appreciate it, if someone can help me.
Ok I did one last time machine backup to my external 80gb HDD. Now i just did a total format (erase and install). Now doing all the software updates, then I will bring all my software back over. Hopefully that'll do it!
Last night for the first time, it turned off when I wasn't even running skype video to video. I was actually doing the backup at the time. It happened twice, around 87 degrees. I think it was overheating... But that could still be do to wrong drivers maybe??? Skype, video to video, and timemachine both use a lot of cpu and seem to make it hot. I will let you know how it goes with the fresh install. Hopefully it'll behave now!
That iStat is good! Very handy to watch the CPU and Temp. I like the improved clock that also shows the date unlike OSX. Although I am not using it because I can't seem to get it to show up all the way to the right, in the corner where the OSX clock is. I can't handle the clock being over mixed into those other icons up there. It needs to be to the far right. Easiest on the eyes for a quick glance.
Similar Messages
-
Screen turns off while install
Hi
I tried a lot of things but nothing seems to work
the problem is that when the installation comes to the point that I am loged in as root (at the start ) the screen turns off.
when i write reboot the machine reboots, tried alt+ctrl+f1 or f2 acpi=off and all things that are noted in the cookbok but nothing works
the macine is acer aspire 1350 with KM400/KN400/P4M800 [S3 UniChrome] graphics
thanksI'm not overly familiar with what installing Arch looks like (nowadays). I presume you boot from some medium, Arch boots, then you have a login screen on the first virtual console, you log in as root - and then your screen turns off and you can't turn it on? Do you get some "no signal" message?
I can't think of anything else other than trying a different kernel (latest Arch live medium uses 3.8, it seems; Crunchbang probably uses something older, doesn't it?). Trying a different kernel on a live medium - well, can't do it. You could set up sshd (shouldn't be a problem even without a working screen) and install Arch using that (https://wiki.archlinux.org/index.php/Install_from_SSH). Alternatively, you can do https://wiki.archlinux.org/index.php/In … her_distro . You should also install linux-lts (which contains kernel 3.0) or get a kernel older than 3.8 from ARM (https://wiki.archlinux.org/index.php/Do … ckages#ARM).
-edit-
Or you could try older live media. The one from February should have a 3.7 kernel. http://mirror.brainfork.me/archlinux/iso/
Last edited by lucke (2013-04-28 20:56:04) -
The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.
-
Hello, when I turn up my macbook it start lagging a lot and also when it is turning off while I use it it works perfectly anyone help
Not enough free storage space can slow your Mac down. Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.
Anti virus software, as well as third party Mac cleaning utilities such as MacKeeper and CleanMyMac can also slow your Mac down.
Check to see if the startup disk needs repairing.
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities in OS X Recovery to repair the startup disk.
Make sure to back up all important data first before using OS X Recovery. -
My Macbook turns off randomly after being on for a while and usually occurs when streaming video on netflix or something. I think it is overheating. Any thoughts?
You might be right about the reheating. Get iStat Pro https://www.apple.com/downloads/dashboard/status/istatpro.html
To monitor your tems and fan speeds. -
My Macbook turns black while active even if sleep mode is not active. it turns on by moving the track pad? Whats wrong with it?
The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton -
Keyboard backlight does not turn off while watching video
I just discovered this issue on my new macbook air (haswell). I also found a thread on it here from back in 2009, apparently it's been an issue for 4 years!!!???
In that thread people noted that if the backlight is set to anyhing more than 5 seconds, the backlight won't turn off while watching a video, but at 5 seconds, turns off fine as it should.
Anyone have any ideas? Just seems like it needs to be taken seriously by Apple and fixed in a future OSX update.Try resetting your SMC:
Resetting the System Management Controller (SMC) - Support - Apple -
What do I do if my ipod touch was turned off while it was updating to the new IOS? I cannot get it to turn back on or talk to the computer. It either shows the start apple screen or a blank white screen.
to all who have taken the time and effort to read my post....thank you. I was certain last night that I would be taking my Macbook into the Apple Store 7 hours drive from my location. I last used it with an Ethernet connection last night. I am up eary and I just turned it on and the WiFi is working again. ?? ???? ?? I have no idea.
Thanks to the firt person who replied especially and gave some suggestions. I am going to take it in to an Apple store in Toronto soon and leave it with them fo a couple of days. (I even deleted my VPN and it is a paid suscription). -
My MacBook turns off immediately when it is not plugged
Hi all, I've had this macbook for about 2 years now.
It had no problems at all. (I didn't use my macbook for like months)
Then I needed it for my school, so I installed windows 7 using bootcamp a few days ago.
and I've noticed that my macbook turns off immediately when it's unplugged.
i thought it is because of windows at first time,
but I booted on with Mac OS and it has same problem.
It just turns off immediately. and it won't back on until I plug it to charger.
Is it battery problem? or could it be anything else?Sounds like the battery to me. Usually they don't like being left for months especially if fully charged.
Check the battery health
Click on the Apple icon at the top left corner of the screen
Click on "About this Mac"
Click on "More Info"
Under Hardware, click on "Power". This will show you information about your battery, including how many cycles the battery has been through, it's charging ability and so on.
Thanks
Glenn -
S890 screen turns off while playing games
I bought this phone a week ago.Everything about this phone is awesom except one thing. The screen turns off while playing games automatically,which is really annoying. Is there any fix for this??
Graphics card springs to mind;
also, in your game settings, in either options or video settings (or similar). Are the settings correct for your card. I know on a low end PC, "full hardware acceleration" can cause crashing.
I'd still think, it's more a graphics related problem. If you have a big flat screen mintor (e.g 24,27 or even 30") then that, in it's own right needs a good card. Add the game to it and you may have problems. I do take it you have compared the specs with what's required on the box (of the game) and "about this mac/"more info"). All the best. -
My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.
shahzadfromlahore wrote:
Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
Who set up the phone? Who's Apple ID was used to activate it? -
MY phone turned off while texting battery at 72%. I tried turning it on but screen stays black.
First, try to reset the phone by pressing the sleep and home button for about 10sec, until the Apple logo comes back. You will not lose data by resetting.
If this does not work, connect in recovery mode, explained here:
iOS: Unable to update or restore -
MacBook turned off and won't charge now
MacBook turned off and it won't charge now.
I tried two different charges I finally see a faint orange charge sign.
Is my battery dead? I have only had this MacBook for 3.5 yearsGo to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information from the top of the page back here.
-
Battery shows 34% and the Macbook turn off
I am having a problem with my battery it shows that the battery has between 30% and 35% of charge but my macbook turns off and I can't turn it on until I plug the power. If I press to see if there is battery it flashes 3 lights.
I tried to upgrade the battery software but I already have the last version.
Is there a recall for batteries of macbook aluminium?Your full charge capacity is far too low for just 98 cycles. Apple suggests that you should still have 80% capacity (perhaps 3600 mAH) at 300 cycles. "Verify the battery" is also a bad sign.
Try resetting the SMC:
http://support.apple.com/kb/HT1411
And if that doesn't change your information, call AppleCare and demand a new battery, as yours has experienced a failure beyond the normal expectations.
Be certain that after you get your new battery, you calibrate it regularly (every 4-8 weeks):
http://support.apple.com/kb/HT1490 -
My macbook turn off and begins to sound an alarm
hi , my macbook turns off and begins to sound an alarm , now i cant turn on
Hi yiyo0103 and welcome to Apple Support Communities,
Exactly which model MacBook are we talking about here? Model, size and year?
Maybe you are looking for
-
Windows 7 Ultimate x64 Drivers not working
When I installed Windows 7 Ultimate N x64 on Boot Camp, it worked fine, I could get into the Windows Partition no problem. When I try to install the Boot Camp drivers for Windows, it says that it can't run the program or that it is incompatible with
-
About a week ago, I had no problem clicking on pictures to open them to bigger size.....As of about 4 days ago - If I try to open a picture on Facebook, it shows the comments but no picture..I don't know what is going on!!! It works fine on Safari, b
-
'Static' freezes MacBook Pro, 100% repeatable (related to trackpad)
Whenever I am in a hurry and run back to my desk, (settling in to 'get back to it') .....IF.........the first thing I touch is the trackpad, the computer freezes. Every time, 100% It's totally frozen (to any input). The cursor is blinking though, so
-
I e-mailed myself a picture, from my cell. When I went to download it, I noticed it was a .png. I have checked settings & read the manual & can't find how to change this. Does anyone know? I had been trying to post a photo to an app & continue to
-
Linearize working space & color rgb
Hello, i'm trying to understand all working space options, that i didn't before. I've read the Color management workflow after effects help. So i'm working on a project in rec709 working space, but when i turn on linearize working space, i can't mana