Machine status shows unkown in VM manager

i got 2 server pools in the oraclel vm manager.
poolA & poolBpoolB displays everything perfectly but poolA machine status shows unknown.
Machine in poolA are running currently & i can connect to them from network but cant control machine behaviour from Oracle vm manager as its showing status "unknown" in oracle vm. i cant start/shutdown the machine from Oracel vm manager.
from command line using oracle sql promt i shutdown the machines & restarted it again & status had changed in oracle vm manager.
but today morning again same thing happened.
any help is appreciated.

Hi
Problem still persists.......additionally not able to view the console of the virtual machines also.

Similar Messages

Why system disk status shows blank in VM Manager

Quick question
Why system disk status is blank, shows none in VM Manager for VM guest. I mean it should say Active/Inactive.... where as other attched disks shows proper status.

What version of Oracle VM Server?
What version of Oracle VM Manager?
What version of ovs-agent?

Test hangs test machnie UI goes black. Reboot test machine, status shows as ready. Can't cancel test, HCK Manager hangs on start.

How do I fix this? Delete the machine? Reinstall HCK server?

Is this your cohntroller? If hck manager is hanging, can you verify that MSSQLSERVER service is running, and you have admin privileges on the datastore, etc?
This posting is provided "AS IS" with no warranties, and confers no rights

Desktop status doesnot change in VDI Manager.

hi,
i have clonned machines in a pool. once user logon to the desktop , the desktop status shows 'Used' status and if the user left the session open i.e desktop open, the desktop doesnot change its state from 'Used' to 'idle'. it must change right.
Even if user clicks disconnect or logoff. the status of desktop in VDI Manager still shows 'Used'.
Any idea? Can VDI handle this? is there any setting i am missing
--parkar

If it's a multi value attribute, then you need to reference the documentation for adding a new value like this. It will involve a new child table and configuration lookup updates. Then you'll also need to create the process tasks for insert and delete into the child table. Once you have the functionality working for simply adding and remove values from the child table performing the correct updates, now here is where you start:
You will still need to create a task that gets triggered. Assuming it's still disable, you can have the same Disable trigger to initiate the task. Now, you need to create an adapter that will read and update/modify your existing child table entries. If you need to delete entries, you will want to use the API to remove a child table entry, or update or insert, depending on your requirements. Then whatever action you perform on the child table using your adapter, the existing functionality will perform the rest.
-Kevin

C# - Get Azure virtual machine status

Hey, how I can get virtual machines current status using C# code?
When you open Azure portal and you navigate under "Virtual Machines" you can see all your virtual machines there.
You can also see virtual machines status, example "running", "stopped", etc...
My question is that, how I can get this status using C# code? One VM is status "Running" and another VM is status "Stopped".
I have tried several different approaches:
However, none of them work...
Console.WriteLine(role.RoleName);
//Console.WriteLine(role.ResourceExtensionReferences[0].State); // returns "Enable"
//Console.WriteLine(deployment.RoleInstances[0].PowerState); // returns "Started"
//Console.WriteLine(client.Deployments.GetBySlot("demovm", DeploymentSlot.Production).Status); // returns "Running" both cases, which is wrong.
Any help, how I can get status "Running" and "Stopped", using C# ?

Hi Nicolas,
We can use Get Deployment Rest API to get Azure VM status, please try below code. You must make sure that the request that is made to the management service is secure. For additional details, see
Authenticating Service Management Requests.
public static string GetDeploymentName()
string path = string.Empty;
string btn = string.Empty;
string HostServiceName = "<Azure VM name>",
SubScriptionID = "<Azure subscription>",
DeploymentType = "<Azure VM name>",
CerPath = path;
String certBase64String = "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";
X509Certificate2 certificateStore = new X509Certificate2(Convert.FromBase64String(certBase64String));
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(
new Uri("https://management.core.windows.net/" + SubScriptionID +
"/services/hostedservices/" + HostServiceName +
"/deployments/" + DeploymentType));
request.Method = "GET";
request.ClientCertificates.Add(certificateStore);
request.ContentType = "application/xml";
request.Headers.Add("x-ms-version", "2013-03-01");
try
using (HttpWebResponse response = (HttpWebResponse)request.GetResponse())
Stream responseStream = response.GetResponseStream();
StreamReader reader = new StreamReader(responseStream);
string deployment = reader.ReadToEnd();
XmlDocument xdocument = new XmlDocument();
xdocument.LoadXml(deployment);
XmlNodeList xxList = xdocument.GetElementsByTagName("Status");
string VMStatus = xxList[0].InnerText;
responseStream.Close();
catch (WebException e)
string meg = e.Message;
if (e.Status == WebExceptionStatus.ProtocolError)
Console.WriteLine("Status Code : {0}", ((HttpWebResponse)e.Response).StatusCode);
Console.WriteLine("Status Description : {0}", ((HttpWebResponse)e.Response).StatusDescription);
return btn;
the value of the string VMstatus is "running".
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SCCM client status show NO

Hi All,
i have deleted obsolete machine from SMS collection
‎‎after that i reinstalled the SMS client and readded the same machine
‎‎still that machine is showing client status is NO
Please help me what to do

Please try this. It worked for me.
Rebuild the repository and WMI services on client
Stop the WMI services and rename the existing repository as
'repositoryold' and restart the services. Initiate all actions once rebuilding respository is completed.
OR
Reset the GUID on client system using Client Action
Tool (CAT)
Add all the client hostnames in CAT
Go to > Client Agent Action
Run > Generate New SCCM GUID.
Wait for actions and initiate all the actions twice. Update the collection members
few time in console then check the client status. It Works!

CBT Enrollment Status shows 'Completed' even though you have only done 1%

Hello,
Can anyone advise why the enrollment status on a CBT, shows 'Completed' when you access it and only complete a part of the CBT (in the Enrolment Summary table). When you click on 'Completed', and view full Enrolment Details the 'Successful Attendance' field is automatically flagged as 'Yes' and the 'Enrollment Status' shows Attended.
The Learner has definately not completed or passed the CBT.
Thanks
Debbie

Hi Anders,
1: Are you using Oracle iLearning or Oracle Learning Management (OLM)?
OLM
2: How is the content set up in the LMS: What is your content structure (chapters, sub chapters etc.)?
I am not sure but it looks like chapters and sub-chapters, that exapnd and collapse. We are using the "Microsoft® Office Standard Edition 2003 Collection" software
3: Do you use SCORM or AICC to communicate between content and LMS? SCORM
Thanks
Debbie

Time Machine backup shows "stopping backup" after just a few Gb.

Time Machine backup shows "stopping backup" after just a few Gb.
Finder shown as "not responding" in Activity Monitor.
1. How to escape from that situation?
2. How to prevent it happening again?
Thanks in advance for help.

Thanks for the suggestion, and apologies for the delayed response.
I have had a couple of looks through Pondini's site, but haven't (so far) found exactly what I am experiencing.
In the meantime, I am becoming suspicious of the disk (a Toshiba e-Stor 1Tb) and/or the cable connection. A couple of days ago I set it up with the cable in one of the USB ports on the computer itself, which I understand is supposed to be preferable (to using a hub).
Initially, straightforward copying of folders via the Finder seemed to work, although some failed because the system thought they were 'in use' (another apparently known problem). However, I managed to copy three folders earlier this week, but today, they have simply disappeared from the external disk! The partial backup (from TM) is still visible.
Finder's behaviour is also still rather odd. When I clicked on the external drive to see what content it included, Finder took ages, and Activity Monitor said it was 'not responding' for a time, though that did sort itself out this time, after a few minutes.
To ensure that I have covered everything, I should point out that I have partitioned the disk using the Mac Disk Utility, so that there is a Mac partition and a Windows (FAT) partition that I intend to use for a Windows computer. Apologies for using such bad words on a Mac forum!

Time Machine status bar option not available ... ?

I have two Mac laptops ... one is a newer MacBook Pro and the other is a 12" Powerbook. Both went through an upgrade from Tiger to Leopard a while back and came through unscathed.
Now I am in the process of configuring backups with Time Machine, and noticed one oddity. On the MacBook Pro, I have the checkbox option to "Show Time Machine status in Menu Bar", but on the PowerBook, the option doesn't show up.
Is there something about the older PPC machines that keeps this from being an option?
Jake

After the first backups, the progress bar / window is gone now.
Is this normal? And can I get it back?
Thank you!

Create a Support Message in Production system showing up in Solution Manage

Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
Paul

Hi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role.

Some videos are semi-missing - they do not show up in File Manager apps or another app

I have what I will call three FILER apps: File Browser, Air Browser and File Commander. I also have MovieSRTPlayer. Those apps appear to not register the presence of some video files that I have definitely copied to my PB. The MovieSRTPlayer will overlay a .srt file's text over a video allowing the pb to show subtitles. It works as long as it can find the video and srt files.
I am definitely transferring a series of video files to the pb's video folder. I am also transferring a companion file to that folder. The companion file is a subtitle file in the form of an .SRT file.
THREE file manager type apps do NOT show those files as present in the video folder. The Video app itself does show and play those video files.
I have copied the files using both wifi-sharing and when they did not show up that way, I copied them using the usb cable to the pb's Z: drive and the video folder.
As stated the dam! files play in the video app. But they do not appear in the various filer apps. And they also do not show in another app, one that will display the subtitle (.srt file) file overlaying the video. In all instances it is as if the pb does not register the presence of those files on the pb.
Now, what is interesting is that when this first cropped up, 7 files were missing - just a mix of video (no .srt files involved). That is they showed in the video app and played but the filer programs did not show them. I managed last night and this morning to get 7 of those to finally show by copying/moving/deleting and recopying. But now I'm running into this brick wall again. I have repeatedly copied two video (avi files) and their companion .srt files to the video folder. They are in that folder (I've looked using usb and wifi-sharing) and they play in the PB's video app. They are most certainly on my pb.
Oh, and yes, I've rebooted a number of times.
Ideas?

I have what I call 3 file manager apps. File Browser, Air Browser and File Commander (the older free version).
They all show or don't show the same thing. So files are missing. And SIZE is not the sole determining factor. When I was testing MovieSRT and "lost" some files I copied and renamed avi and .srt files. So there are two extra .srt files in the Video folder. But while they are 32kb (kilobytes) and 58kb respectively, they do NOT show up in the File managers. The other two identical files with the names matching the .avi files do show up. The one very large mp4 (2gb) does not show up. A subfolder I created just as a test does not show up. But the large mp4 and subfolder were showing up while I was actively copying the 2gb file - they would show up as the file was being copied - the filemanagers showed the file getting larger and larger and while doing so the "missing" subfolder also kept showing up. Then once the large file was completely copied, both it and the subfolder "disappeared" - again, the large mp4 does show in the Video app and it plays.
My persistence probably is based on the fact I was a computer programmer many eons ago! Also, I was trying to get YOUR app to work and the avi files were not showing up in your listing but they were showing and playing in Video app (but no subtitles). Finally, after copying/moving/re-copying over and over including moving and copying to the PB's Print folder (just since it was empty) and copying it back to the video folder (now 2 copies), the files would finally show up. Peculiar - yup!
Oh, one other thing - the 3 file managers all show what I will call the virtual Playbook-Demo video in their listings - your app does NOT show it. Obviously, it is not located in the Video Folder but somewhere in the bowels of the PB. So, the filemanagers are relying on some "file structure" that is not fully correct. But your app does not appear to show it.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive. Help

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Time Machine only shows the current copy of the file I am trying to restore. There is none of the time machine backup histories shown. I am running OSX 10.7.5. I see the backup files on my external Time Machine hard drive in the Backups.backupdb folder.
Time Machine does show the history of my Macintosh HD, but when I try to navigate to the folder I wish to restore the backup history disappears. I've been searching for answers and I have not found one that works for me.

Purchase Order has approved but Status show as Unapproved

Dear All Experts,
I have a Purchase Order need to go throught approval procedure. The Purchase Order has approved by user and add into system and printed out. When second time, open the same Purchase Order, the status show "Unapproved" but the Purchase Order windows header name show Purchase Order [Approved], this make user unable to copy to GRPO. I have try to restore stored procedures in SAP B1, it does not make any changes. The user is using SAP B1 2007A SP0 PL49. Please Advise.

Hi Angie
the purchase order once approved has to be added on to the system after approval if u say that u have added the purchase order after it got approved then that seems to be a concern for that u need to contact ur sap partner or if u are a partner then u need to get in touch with sap to resolve the isssue as it could be because of problem with ur database
but before that please be sure off that u are using the correct way and have sucessfully added the documnt apon approval.
Regards,
Manish

Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Sale order status showing being processed

Dear Friends,
I am working in SAP ECC 6.0
My sale order Qty is 10 pcs eing processed
and delivery qty is 10 pcs - Completed
Good Issue - 10 Pcs - Completed
Invoice - 10 Pcs - Completed
In spite of carrying out full delivery sale order status is still showing being processed.
is there any configuration missing or is there any program to update the status.
Kindly advice.
Satish

Hi Ankur,
2 Doubts i have:
1)
In our case for the Item Category we have not maintained anything in Completion Rule however we have maintained Update Document Flow in Order to Delivery Copy Control.
Our Document status shows as Completed in this case as well. Hence i do not know the Significance of maintaining Completion rule in item category.
2) I have a order type which has Order Relevant Billing. The Copy Control for Order to Billing does not have any Update Document Flow Check Box. We are using a Service Material in this Order Type.
After creating the Billing we still have Order status as Being Processed.
Can you help in finding a solution to the above?
Madhukar

Machine status shows unkown in VM manager

Similar Messages

Maybe you are looking for