Mail:  10.9.1 hasn't fixed group email and attachments problems

Hi all.
I was under the impression these were fixed by 10.9.1. but not for me.
Group email: trying to add a group to the BCC line email freezes Mail. I have to do this several times a day. I have several Contacts groups and Mail hangs whichever one I try to mail.
Attachments: every attempt to send mail with an attachment is rejected. I get the 'try again/choose another server' window after several minutes. Trying again is always successful, immediately. This has only happened since Mavericks and no settings have changed at the server end.
Any ideas? Thanks,
Aidan

10.9.1 is still in beta. Should you have any problems with it, you should post in the Mac Dev section.
Sorry,
Clinton

Similar Messages

  • How to send a group email and have the recipients hidden?

    How do I send a group email and have the recipients hidden?

    I have a new OSX 27" iMac that is running Maverick. 
    RE: group emails, I am trying to omit individual recients and have tried the following options without success.
    1) Mail- Composing- checked "Automatically- Bcc"
    2) Mail- Composing- unchecked "when sending to a group, show all member addresses"
    The result is that all names continue to show up with email addresses for group emails.
    HELP!  HELP!  HELP!
    Lynn 

  • I need to send group email and forward group email?

    I need to send group emails and forward group emails and dont find that capability with ipad or iphone

    There are quite a few group emailing apps available, but most will not allow you to forward an email, as they can only send new emails written within their own app.
    MailShot Pro, uniquely, adds group email to your device so you can send to your groups directly from the standard Mail app. This allows you to forward an email, with any attachments intact, right from Mail.
    Find out why quarter of a milllion users are now using our MailShot apps at jo.my/mailshot (iTunes link). A free version is also available to try, limited to a few small groups of contacts.
    Peter
    Soluble
    Disclosure: I am the developer of MailShot, and may receive benefit from any sales.

  • Group Emails and Texts from iPhone 4

    Why can't I send group emails and texts on iPhone 4...Really disturbing. Guess I'm back to Blackberry...Help

    deggie is correct. also depending on the urgency and no# of SMS, you can take a sceen shot then print those photos.

  • Group email and address book transfer

    I am a new mac user so clueless about most things: two questions
    Is it possible to transfer my compuserve address book to my mac account?
    If not, I was trying at least to transfer group emails: in other words, to cut and paste the emails from my group, create a new group account in MAC and paste. But after creating "group" in mac, I could not access the folder or find where how to paste addresses under the group.
    Finally, how do I make functions for bold/italics/underline/font appear in my email?
    Thanks!
    Epalinges

    Reinstalling the Mail.app rarely resolves any problems with the application.
    All Mail.app account settings are stored in the Mail.app preference file which is not deleted and recreated new when deleting and re-installing Mail so if the SMTP server setting problem is with the preference file, deleting and re-installing Mail will be a complete waste of time and effort on your part which doing so usually is anyway.
    Is this email account and SMTP server provided by your ISP used for connecting to the internet or other?
    If other, are you also accessing an email account and SMTP server provided by your ISP used for connecting to the internet with Mail and if so, any problems sending messages with this account and SMTP server?
    Most ISPs and email account providers have sending limits/restrictions for non-business email accounts. Some have a total recipient limit per message along with a total number of recipients limit for all messages sent in a 24 hour period. Some only have the latter which can be reached or exceeded with a single message.
    And lastly -- when I put a group email name into my Mac Mail,
    it changes it from the group to the entire list of anyone that is
    in the group! Not cool! And it has never done this before either...
    Go to Mail > Preferences > Composing. What is your setting under Addressing for "When sending to a group, show all member addresses"?

  • TS3899 How do I send a group email and not have to select each person

    How do I send a group email without having to select each person separately

    Hi Blair
    You dont need to use a server, but you will probably need a group emailing app of some sort to help you.
    There are a number of apps available on the App Store. Most will only let you send email from inside their own app, but MailShot Pro uniquely creates special contacts that you can use right from the Mail app, and tens of thousands of compatible apps, building group email right in.
    You can find the app at https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&m t=8, a free version is also available, which can only create a few, smaller groups, but can be upgraded.
    Peter
    Soluble Apps
    Disclosure: I am the developer of MailShot Pro and may benefit from its sale.

  • My Firefox won't quit and gives a "not responding" message after I use Google Mail. I have tried starting in "safe" mode and the problem still occurs.

    I have an issue where Firefox wont' quit and gives a "not responding" message after I have been using Google Mail. It works fine when I am not using that program. I have tried Safe Mode and the problem still happens when I go to Google Mail, so it is not connected with add-ons, extensions, etc.

    Many site issues can be caused by corrupt cookies or cache.<BR><BR>
    Clear the Cache<BR>
    '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
    <BR><BR>and<BR><BR>
    Remove Cookies<BR>'''''Firefox/Tools > Options > Privacy.'''''<BR>
    Under '''History''', select Firefox will '''Use Custom Settings'''.<BR>
    There is a button on the right side called '''Show Cookies'''.<BR><BR>
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
    <BR>While you are in safe mode; '''''Firefox Options > Advanced > General'''''.<BR>
    Look for and turn off '''Use Hardware Acceleration'''.<BR>
    Poke around safe web sites and see if there is still a problem. Then restart.

  • I need to change my security questions I'm on my mail I clicked it to send me an email and it hasn't worked once

    I'm so mad

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (100095)

  • Group Calendar and different problems

    Hey everybody,
    tried to work with wiki calendars for a shared group calednar. The basic setup went well, but now i figured out some problems:
    The DNS is setup well, and "changeip -checkhostname" works without an error. The client could ping the server with <FQDN> and getting the correct IP address. Server is 10.6.8 as well as on the client 10.6.8.
    1.) When creating an event in the shared wiki calendar: the user couldn't invite any person. The inivited person didn't get an invitation. In the shared calendar the user is marked with an "". When creating the event in the personal calendar the inviation is working (see Nr. 2 below) and the user is shown with an "?" and when accepted with an check.
    2.) Inviting an other person (within the personal calendar) will showing up the event in iCal with a grey dotted border, but he didn't get a notification in in the list. He could accept or decline by finding the event in the calendar, double click it and hit "accept" in the event window. That's working fine, but he didn't show an message when a person is invited, the event has updated or anything else.
    3.) Permissions in the wiki calendar: The user has the permissions to read the wiki, but not to write to it (assigned to it with the Webinterface).
    When the user tries to edit or deleting an existing event the following message is shown
    When clicking on "Revert to Server" the event is set back to the old data - reverted - that works fine.
    But when the user tries to create a new event, he's getting the following message:
    when click on "Revert to Server" another message is shown:
    Ignoring the message would keep the event in the calendar as well as "Go Offline" but not synced to the server. Even after manual syncing to the server or restarting iCal, he is syncing with the server but keeping that event showing up. After a few days there are so many wrong event the user didn't know what's a correct event on the server, and what's a false event.
    That's very wired, because the user might think it's on the server, but it isn't! It's just shown in the local iCal
    Could these problems be solved be reconfiguring the server (maybe command line?) or are they "bugs" in the Server?

    #1 is not possible from what I gathered through monthhs of digging through forums.  Group calendars do not send/receive invites.  I even think I saw it in the Wiki Server documentation.  Our method here is to send out the invitation from the user.. and then copy to the group calendar.  The sending of events can be a tricky one..  Here I use an email gateway because  our mailserver is separate from the ical server.
    #3  I am uncertain what you say is a problem.. if the user has read-only permissions to that group calendar any modification on his part of the read-only calendar will flag with the above error message.

  • Possible bug with HTML emails and attachments from Mail.app

    I'm trying to send an attachment with an HTML email from Mail.app and getting unexpected results. I've been messing around with the order that things get added to the new e-mail and it seems that I can have either an attachment or I can have HTML email, not both.
    The code... (of course simplified)
    tell application "Mail"
    set new_message to make new outgoing message with properties {subject:"A subject", sender:"[email protected]"}
    tell new_message
    set visible to true
    make new to recipient at end of to recipients with properties {address:"[email protected]"}
    tell content to make new attachment with properties {file name:alias "Path to your file as string"} at after the last paragraph
    set html content to "<head><body>Some HTML here...</body></head>"
    end tell
    send new_message
    end tell

    etresoft wrote:
    The problem is that there is no such thing as HTML email.
    Well, I wonder what I have been generating for over three years now. RTF ? Because it sure looks like HTML. I must agree that HTML is not documented or even mentionned in the Mail AS dictionnary, but it does work, though you must specify visible to false so that it does. Here's my sub:
    tell application "Mail"
    set DMF to default message format
    set default message format to plain text
    set newMessage to make new outgoing message with properties {subject:theSubject}
    tell newMessage
    set visible to false
    set sender to theSender
    make new to recipient at end of to recipients with properties {name:Photographer, address:theAddress}
    set html content to "<html><head><title>" & theSubject & "</title></head><body>" & "This is an automated response." & theSource & "Find your personnal planning on the web: " & thelink & "
    </body></html>"
    end tell
    send newMessage
    set default message format to DMF
    end tell

  • Sometimes Mail is slow emptying trash folder or sending emails with attachments

    This happens occasionally- but enough to be an annoyance!
    I am about to send an email using Mail to an address, and I wait very patiently while the Mail program makes a copy, communicates with server, then finally sends the email.  Sometimes, to send an email with a simple attachment, this can take as long as three to four minutes!
    Another related problem is Emptying the Trash folder.
    Sometimes it takes an inordinate amount of time to do this, and other times such "deletion" takes mere few seconds.
    I wonder what it is I'm doing wrong.

    ''jbugler [[#question-1058767|said]]''
    <blockquote>
    Hi
    The context of this question is:
    * I've had an Apple iMac for just over 3 years;
    * and I've been using their 'Mail' application to send/receive emails;
    * but not infrequently, when I send an email with one or more attachments all of the email doesn't get to the recipient;
    * and after working with Apple and getting nowhere;
    * I'm now using Thunderbird instead of Mail.
    I like Thunderbird, but I've noticed that if I send an email with an attachment (an example is an email I've just sent with a 2.6MB attachment), it takes a while to both (a) first send and then (b) copy the email to my 'send' folder.
    Are there any 'settings' changes I can make to speed things up, or do I just need a bigger machine? (I've noticed that over the 3+ years I've had the iMac, it's got progressively slower and slower.)
    Regards
    John Bugler
    </blockquote>
    Many thanks

  • Page and group Import and export problems

    we are migrating from portal 3.0.6
    (part of ias 1.0.2.0.1)
    to
    3.0.8(part of iAS 1.0.2.1).
    OS:Solaris 2.6
    The exports from 306 works fine.
    when i imported security data for users and groups(secimp.csh) it swapped the users for two groups
    i get the following error when i try to import pages
    ERROR at line 1:
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at "PORTAL30.WWUTL_POB_TRANSPORT", line 1879
    ORA-01403: no data found
    ORA-06512: at line 6
    Anybody has this problem?
    Thanks
    null

    Hmm.. export/import only works between portal installations at the same version level. What you need to do is to use the upgrade scripts that will take you from Portal 3.0.7 to Portal 3.0.8, which are not available yet. We hope to make these scripts available in a couple of weeks on OTN. (Yes.. I too am waiting for these scripts).
    Best Regards,
    Harry Wong

  • HT2736 A friend gifted me something, but it NEVER arrived, he tried resending the mail 3 times, then tried with a different email, and still didn't work. WHAT!?

    A friend gifted me the new single Super Collider, but I never got any e-mail or message at all. He paid for it, got charged to his credit card, and I received nothing. He tried sending it multiple times, without success, then he tried with a different email account of mine, which didn't work as well. We're both seriously ****** about this, but before ragin out in flames, is there any way to solve this?
    Facts:
    We have the same country store on iTunes.
    Both my emails have an associated iTunes account (both same country as his)
    I checked my mail everywhere I could, no spam folder, no trash folder, no main folder, nothing.
    What can we do? If possible to avoid contacting support better, apple support gets 5 stars on the worst tech-support system.

    You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
    http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/

  • My mail app won't let me enter my email and I can not update my phone

    i want to update my phone cause these popups keep annoying me but I'll press agree and it won't do anything it doesn't freeze but it just won't work so I'll go to apple support and I want them to email me but my email isn't on my phone so I'll go to set up an email and it acts like I've set up an email and I havent everything's empty what do I do can someone help?

    Hello,
    is there any number on the gift card  that you could call? If so, call that number.
    Also, check out this website, as it might give you some tips/answers:
    http://support.apple.com/kb/TS1292

  • Does iLife '06 fix double thumbnail and crashing problem of iPhoto '05??

    I had nothing but trouble when I upgraded iLife last year from '04 to '05 - I have hated iPhoto ever since. After all the help from this sight, including un-installing and re-installing '05, I still have problems.
    Does anyone know if '06 is any better???? I am hoping it will solve all my problems.

    Melinda:
    Do your exported files contain a jpg extension? If so, select one and bring up the Info window, Command-I. In that window select Preview as the default application for that file and click on the Apply to all button. Now see if the exported files will open with Preview or other image viewing applications.

Maybe you are looking for