Mail Forward Rule Not Working

I have a few mail forwarding rules set which don't seem to be working. I see no forwarded emails in my send mailbox, and when I click the small arrow in the message window that indicates it has been forwarded, I get a message that says I must have deleted the message, which is not true. This is what the rule looks like:

Mail rules only work on incoming mail. Once the mail is listed in your Inbox, the only way to use a rule is to manually run it. Given how rules work this may render your rule as non-working.

Similar Messages

  • Outlook 2013 OOF "Forward" rules not working against Exchange 2007

    We have found that on Outlook 2013 clients (connecting to Exchange 2007) we cannot set forwarding rules in OOF (Out of Office / Facilities) if we select a recipient from the GAL. The error we get when trying to set the rule is:
    "Changes to the rule cannot be saved"
    However, if we manually type the SMTP address (without resolving it to the GAL) and click OK the rule is accepted.
    We have tested the rule using other versions of Outlook and it appears that Outlook 2013 is the only client that has this problem.
    Any suggestions would be welcome.
    Mark

    The issue is know under OffBug 57619. A support case for this had been started in April but no customer pursued a fix yet.
    Currently its status is low and no fix is intended. If this is a critical issue for you and to get it reconsidered, you'll need to open a support incident of your own, refer to OffBug 57619 and state your case as "high customer impact" (in case your not
    a Premier customer) and request a Hotfix.
    Robert Sparnaaij
    [MVP-Outlook]
    Outlook guides and more: HowTo-Outlook.com
    Outlook Quick Tips: MSOutlook.info

  • Fetch new mail messages does not work

    On my notebook the fetch new mail messages does not work
    Settings:
    - Fetch new messages:     every minute
    - Play sound Purr
    I need to us the manual button.
    On my imac it works fine with the same accounts

    My mail sounds are all screwed up. I hear the plane fly when I send an email but when I receive mail, no sound. I have rules set up which worked in Tiger. One rule is for mail to play a message "You have a message from "John Doe" when I receive an email from "John Doe" but it only plays when I send "John Doe" and email. Assbackwards.
    Sometimes when reading new mail, it just disappears. I have to click on it again. I find this version of email to be very flaky!
    Dave Brenneman

  • E-mail notification does not work. PX12-400r

    E-mail notification does not work. Test message fails, like everyone else. Is that possible? Someone else had this problem?

     Hello gusev67
    Have you tried with/without custom email notification (SMTP) settings?  
    Have you checked if the defaut or custom SMTP port has been forwarded to your px12?
    Have you checked if your ISP is blocking SMTP ports for your connection?
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • When logging in into yahoo mail after typing in password Firefox is adding something, login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    When logging in into yahoo mail after typing in password Firefox is adding something, probably remembered password and login fails all the time. At yahoo mail Notepad does not work because it is impossible to close the list of items and they cover information, so I have to go to IE.

    Only when i go to a different browser (like IE) after i clear it , then all that shows up is the pages i visited in IE , that is what bugs me , why is IE browsing history sowing up in Firefox ??
    Basically , i can clear the history in Firefox , and then for a example , go to Craigslist , using IE7 (launching it from a complete different Icon , in other words at that time i never open Firefox) , then after closing out , or even leaving open as it does not seem to matter , i go into Firefox , and hit History , and there is every place i visited in IE7 , on my History in Firefox

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • Infopath form load rule not working in browser forms but works on Client

    Hi
    I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
    It works when I open it on client, but on the browser it fails.
    Have anyone encountered such an issue.

    Check below:
    http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
    Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
    Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
    http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
    if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
    This look like a bug. Here are the steps below that will lead you to the bug:
    Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
    Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
    Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
    Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
    Open and Save category, click the Rules button and add a new rule in it and save it.
    Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
    Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
    If this helped you resolve your issue, please mark it Answered

  • My mail icon is not working after update ios 6.1.1 ????

    dear sir please give me soluction.
    my mail icon is not working after update of ios 6.1.1

    You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
    Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
    You can change the country and other things by:
    iOS: Changing the signed-in iTunes Store Apple ID account

  • Defaulting Rules Not Working for Repair Orders in OM?

    Hi,
    Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
    But in our project we are using  Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
    Please help me to solve this issue ASAP.
    Thanks,
    Kishor

    Hi,
    You have like this:
    1. Price list
    2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    You have to make
    1. XXOE_DEFAULT_PVT.custom_code
    2. Price list
    3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    Did you made own custom code to pick currency?
    Regards,
    Luko

  • The Yahoo mail toolbar is not working. Can't delete, can't move, can't mark as read, etc. It works on Chrome. What's up?

    The Yahoo mail toolbar is not working. Can't delete, can't move, can't mark as read, etc. It works on Chrome. What's up?

    Of course they would say that. Tell us are there any other problems?
    Some added toolbar and anti-virus add-ons are known to cause
    Firefox issues. '''Disable All of them.'''
    Make sure you have the latest version. The best thing to do is first remove
    the program, then get the full installer.

  • Nokia browser & mail service is not working in my ...

    nokia browser & mail service is not working in my x2-02. When i select those 2 icons they didnt respond at all. Please help me.
    Solved!
    Go to Solution.

    hi mate,
    have you checked if there are any firmware updates available for your device? if there are any, please update to the latest version offered. if that fails, try reinstalling your current firmware thru Nokia Suite, and if that doesn't work, then Restore your phone to factory settings.
    Failign the above, you need to visit Nokia Care for inspection: http://nokia.com/support

  • 10.9.1 Mail spotlight search not working!!!!! APPLE HELP!!!!!!

    10.9.1 Mail spotlight search not working!!!!!

    When you type in a search term in Mail, does it drop down a list of search criteria like People, Subjects, Mailboxes?
    Or does it just offer "message contains"

  • My Comcast Mail account is not working on all three devices

    Good Morning!
    Last night I plugged in my IPhone and IPad for charging and syncing. This morning my Comcast mail account is not working on my MAC, IPad and IPhone.
    I have deleted the acount on all three devices and set up a "new" account. Did not work. One message I receive is check the mail servicer. I have made sure the correct info is entered. My GMail and Mac email are working.
    Please help

    Problem with Comcast since last night. They say it won't be solved til after 8 tonight.
    Thank you

  • My e mail notifier is not working althouth i have done a test with my server

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/834474''
    My e-mail notifier is not working. I have checked my e mail notifier settings and tested account which was ok.
    No e-mail notifications are showing but when i enter my windows live mail i do have emails in my inbox.

    I have already tried this but still the same. I have also tried un-pairing my speakers and re-pairing! Still get broken playback at times. This even happens when I am close to the bluetooth receiver.

  • Mail flow is not working Exchange 2010 to 2013 in coexistence mode

    Hi ,
    We are migrating Exchange 2010 sp3 to Exchange 2013.
    mail flow is not working from 2010 to 2013, mails are qued up in smtp relay queueu.
    already added 2010 ip  address  to 2013 receive connector and give anonymous permission.
    but still mails are smtp relay queue.

    Hi Sujith,
    As requested by
    Nithyanandham please post the error from Queue Viewer.
    Few things to check. 
    Please remove IP address from "Default Receive connector" first.
    Ensure both servers can ping by FQDN and it returns correct IP.  i.e.  ping exch2013.contoso.com
    Make sure both exchange server can communicate each other. if possible try to telnet port 25 by FQDN of the Exchange2013 server and try to send an email from exchange2010 using the URL below. if there is any error please post error.
    http://exchange.mvps.org/smtp_frames.htm
    Make sure "Exchange server Authentication" is ticked in your default receive connector properties. If not ticked tick it and restart Transport service and check mail flow again.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Maybe you are looking for