Mail setup for sbcglobal stuck in verifying screen
I am trying to setup my att.yahoo mail account in my iPhone4s. I have entered the correct incoming and outgoing mail server host names. Then the screen gets stuck in a verifying mode. Is there a way to set the ports before it tries to verify the connections?
Have you tried toggling - Command, Control, F
If you do a 5 finger swipe up do you see Apple Mail as it's own desktop? If so when you expand Apple Mail use the green traffic dot in the upper left side instead of the full screen double arrow on the upper right side.
Similar Messages
-
Unable to configure Mail setup for SMTP : Please Help
Hi experts,
I have been trying since 2 weeks with most of the links like help.sap.com, and other links which experts are sugested, but then also I am uable to configure the mail setup for a SMTP server from SAP R/3 4.7EE.
Couls anyone help me please,
Challenge: I want to send mails from SAP system to other internet servers or mail servers.
SMTP server is installed,
SAP R/3 4.7ee is in place.
I request you experts please provide the exact step by step procedure to configure, so that I should not run behind the links.
Thanks in advance,
SunilHi Juan, Hi Juan,
Thanks for your reply, I am happy that one big hope has come. regarding my issue its starts from the SCOT configuration, I have created the Node, and under support address types selected INTERNET type.
Under INTERNET settings
address area = *mail
have not mentiond RFC destination.
Hope this info will guide you my issue.
Thanks in advance,
Sunil -
Initial Mail Setup for Old AOL Address
BACKGROUND
I have an AOL e-mail address. Until recently, I logged on to the AOL application and retrieved my e-mail that way (I had never used the Apple Mail application). AOL recently allowed their users to get rid of AOL as their ISP and so not use the AOL application, but at the same time to retain their e-mail address. So I got rid of AOL as my ISP and moved to a local cable company.
QUESTION
I still have my AOL e-mail address. I can easily access the e-mail to this address by logging onto AOL.com and going to the e-mail section.
1) Can I also use Apple's Mail to access this e-mail address?
2) If so, how do I set it up? The Mail setup routine is filled with (to me) unreadable techo-gibberish (by the way, I did get a degree in computer science back in the day). My specific questions are (when setting up Mail):
- what Account Type do I want (POP, IMAP, Exchange)? The help files tell me to ask my ISP, which doesn't help me much.
- then (if I guess on Account Type), Mail asks for Incoming Mail Server. Again, I don't know what they're asking for.
Any help would be very much appreciated!
iMac 17" Mac OS X (10.4.7)You may find AOL Service Assistant - Internet Utilities the simplest way to set up your AOL account for Mail.
Believe it or not, it is a fairly well written, OS X-savvy application. It is also the only simple way to get any saved mail out of AOL's proprietary "Personal Filing Cabinet" format or contacts out of it's proprietary Address Book format.
You can choose to configure any of the four Apple apps its supports individually, but if you choose to import old AOL email, you must configure a Mail account for AOL at the same time. Because of this, I recommend not using the manual method from http://members.aol.com/adamkb/aol/mailfaq/imap/applemail.html to set up the account, because you may end up with two email accounts. I would also first make backup copies of Mail's pref file (~/Library/Preferences/com.apple.mail.plist) & the main Mail docs folder (~/Library/Mail) just in case something weird happens.
If you have a lot of saved AOL mail, the import process can take quite a while, so give it at least say, 10 minutes per 100 messages, before deciding it isn't responding -- there is a progress bar but it doesn't move for minutes at a time. Also, the account settings it installs may be slightly different from the ones in the unofficial guide -- basically, it installs the SSL settings the guide mentions. The included Read Me has more info about that.
I have used this app with Mail & with Address Book & it does work with Mail 2.x & Os 10.4.7. -
HT201320 ipod mail setup for t-online
I am trying to set up my mail account for Deutsche telekom (t-online.de). But when I enter all the data my ipod tells me that the mails cannot be received: user name or password for secureimap.t-online.de is not correct". An I don't know why... Any ideas?
I reply to this question even it is over one year old since I had the same problems recently. I described how I solved it in German in this article:ios 7 E-Mail-Client mit T-Online. In short the trick is to set an extra password for external email clients (like Outlook or the Apple email client) in the menue of the email center ("E-Mail-Center"), which has its own password - the same as that for the customer center ("Kundencenter").
Set the SSL-decryption setting to "on". Use the following ports:
inbox server: secureimap.t-online.de, Port: 993, safety: SSL/TLS,
outbox server: securesmtp.t-online.de, Port: 587, safety: SSL/TLS.
These settings should be found automatically during the setup of the email account.
And I recommend to set the storage time for emails in the email center from 90 days (default) to "never delete". -
Dear Gurus,
Can u please assist me to Setup for sending mail from SAP
i want to send Physical Inventory Document via mail
Pls guide me step by step...........
Thanks a lot in advancei'm learning SAP........
ok
can u tell me how to set up printer....
bcos i want to see how physical inventory doc looks like....
even i'm not able to see print preview of PI Doc
Thanks -
Waiting for Iphone stuck dfu blank screen
My sister messed up her phone and was trying to take a screen shot ,in the end she got it in dfu mode blank screen and cant turn back .so i connect to itunes and it says its in recovery mode ,clicked it and loaded the software i downloaded before gets to the "waiting for iphone" and its stuck on the swigaly loading bar and stays like that any ideas to fix it and there is no turning back i tried exiting dfu.
If it won't restore, you'll need to take it to the Apple Store for an evaluation.
-
Mail setup for HK ISP Netvigator user
Hi I am new to the Mac family and had tried to setup my email account provided by the HK ISP (Netvigator) but I had tried many times still the error message pop up.
Here I had attached the error message from the Mail and pls help
CONNECTED Nov 30 15:12:43.690 [kCFStreamSocketSecurityLevelNone] -- host:mail.netvigator.com -- port:25 -- socket:0x17b473c0 -- thread:0x17ba8b40
READ Nov 30 15:12:43.699 [kCFStreamSocketSecurityLevelNone] -- host:mail.netvigator.com -- port:25 -- socket:0x17b473c0 -- thread:0x17ba8b40
220 ymail02dat.netvigator.com ESMTP server (InterMail vM.6.01.03.02 201-2131-111-104-20040324) ready Sun, 30 Nov 2008 15:12:43 +0800
WROTE Nov 30 15:12:43.739 [kCFStreamSocketSecurityLevelNone] -- host:mail.netvigator.com -- port:25 -- socket:0x17b473c0 -- thread:0x17ba8b40
EHLO n219077159173.netvigator.com
READ Nov 30 15:12:43.755 [kCFStreamSocketSecurityLevelNone] -- host:mail.netvigator.com -- port:25 -- socket:0x17b473c0 -- thread:0x17ba8b40
250-ymail02dat.netvigator.com
250-HELP
250-VRFY
250-XREMOTEQUEUE
250-ETRN
250-PIPELINING
250-DSN
250-8BITMIME
250 SIZE 10485760
CONNECTED Nov 30 15:12:43.791 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:mail.netvigator.com -- port:25 -- socket:0x17b473c0 -- thread:0x17ba8b40What did your ISP tell you to enter for the following information:
*Incoming Mail*
Server Name
Port Number
Authentication Method
SSL Status
*Outgoing Server*
Server Name
Port Number
Authentication Method
SSL Status
Without this information, you can't setup your mail account to work with Mail properly.
Mulder -
E-mail setup for a group to receive and send messages
How is the best way to setup an e-mail account where the Users of this account can send and receive e-mail messages?
Hi DR.
This question itself is a answer.
First: user needs an email address for communication and email mailbox for store mail items
2nd: Exchange server can provide email mailbox
3rd: you need to have domain configured on that exchange server
4th: you need to have Active directory server to control the user account
or,
use the cloud base email services such as yahoo/gmail/hotmail etc
UMESH DEUJA MCP,MCTS,MCSA,CCNA -
ITunes 11.0.2.26 For Windows Stuck in Full Screen Mode
Itunes 11.0.2.26 is in Full Screen mode and I cannot get it out. When I go to "View" the Full Screen Ctrl + F is Paled out. I cannot get it to resize. How can I get it out of Full Screen. I hav Windows Vista Home Premium.
Thanks .Mine is a brand new machine. Burning software was installed before iTunes was installed. I am looking at this article which points to a possible problem with the GEAR drivers: http://support.apple.com/kb/TS2308
It also points to the afs.sys and afs2k.sys drivers as a potential problem. I've verified that I don't have these drivers on my machine.
When I go to the GEAR site, it tells you to manually uninstall the GEAR drivers and install the latest ones. First, manual uninstall which involves editing the registry. Really? While I'm quite the expert at registry editing, NO CONSUMER should ever be told to edit the registry to delete anything. Second, if in fact the GEAR drivers are the problem, shouldn't iTunes install the right ones? This is a prime example of poor software engineering at its core. -
E-mail setup for Microsoft Outlook running on iMac
Took delivery new iMac and set up mail account under Apple "Mail" app. Subsequently installed Microsoft Outlook for Mac. Entered details for my main mail account which were the same details entered in Apple Mail account. I am unable to send mail from Outlook app, but can receive mail. Have checked settings several times and see no difference from Apple Mail which send mail just fine. For Microsoft Outlook, when I enter an e-mail message and then hit the send button, the message just disappears and does not show up in sent folder. Any idea on how to fix appreciated.
Go to their configuration instructions on the website and follow them, they do not seem to have been updated since Mountain Lion but should still be valid. Set the account up manually in Outlook.
-
Has any set up mail on Iphone 3GS with a COX account with success. Wireless carrier is AT&T. If so I sure could use some help!!
ThanksI tried to follow these instructions for connecting my iPhone 3GS to my Cox email account (the East region) with this page from Cox:
http://support.cox.com/sdccommon/asp/contentredirect.asp?sprt_cid=158115c0-571b- 4cad-a21d-28e74c663906
I could not get incoming or outgoing mail to work as shown in the article; although I could save the settings, when I tried to access the mailbox I got "failure to connect" error messages.
Just for kicks, instead of entering my full email address for the *incoming mail server* and *outgoing mail server* settings (e.g. [email protected]) as the Cox article displays, I entered my email address without the @ symbol and domain, just joeblow for both of those settings.
Eureka, that worked. I found that it worked being connected to my home wifi, and when connected without wifi over the regular cellular network and the 3G network.
So far, so good. I'll keep trying this for a day or two, and if it still works I'll post full instructions and also provide a comment to Cox so they can provide this suggestion as well. I'm sure these settings worked for Cox at one time, so I'm not sure why they didn't seem to work for me. -
Present mail setup for 2 accounts - want to separate everything
Presently have 2 accounts in mail that is accessed by 1 icon on the dock. What I need is 2 separate mail programs on the dock that opens only 1 of the 2 accounts. In other words, 1 program per account. How do I do it?
When either of the 2 users logged in, they'd only be using one program/email client, in this case Mail, to access their emails. I thought that I could follow the same idea without setting up 2 users, or alternatively, as you are saying, 2 clients
The reason why this doesn't work is that when Mail.app (or any app, for that matter) starts up it looks for a specific configuration file to use. In Mail.app's case it looks for the file com.apple.mail.plist in the current user's preferences directory.
So if you could launch two copies of Mail.app at the same time they would both look at the exact same configuration file and have the same set of accounts, etc.
The reason why a different user gets different settings is that they have a different preferences directory from you - your preference folder might be /Users/kaal/Library/Preferences/ while some other user might be /Users/someoneelse/Library/Preferences/
There's no way to tell Mail.app to use someone else's preferences directory while you are logged in (that would violate the system security, for one thing). -
Eprint mail setup for a landscape file .
I'm dropping an eprint to a Photosmart D110, but it always prints in portrait, is there any clue to manage the eprint mail attachement towards LANDSCAPE printout? Many thanks
This question was solved.
View Solution.Hi Willie_Z,
If the attachment is saved in the landscape orientation then it will print in landscape.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Slide for Emergency - Stuck on Lock Screen
Recently on my new iPhone 6, I noticed that the battery percentage was not going down with the use of my device. I held the lock button to power off, and I turned the phone back on. When I saw the lock screen, the time was not being displayed and the "Slide to Unlock" prompt was changed to the "Slide for Emergency" prompt. After sliding to input my passcode before Touch ID could work, my passcode would not allow me to access my phone and instead, my phone vibrated once and sent me back to the slide to unlock screen. These screens seem to be very glitchy, often times not responding to wake button presses or home button presses. The screen will also often go black for no reason. My device is running iOS 8.1.2 without any jailbreaks. I've already tried turning it off and back on, and holding the lock and home buttons at the same time.
Any help would be appreciatedTry the following testing after each step
- Reset the device. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem. -
R12.1.3 WF Notification mailer setup for SMTP authenticated relay
Hi,
I have to configure WFNM in R12.1.3. I was given an SMTP server ip address, an email and password.
1.Through outlook I am able to send that mails to gmail or yahoo mail through that mail id.
2. Tried telnet from concurrent manager server node (of course its a single node installation), it working properly. But I have to enter username and password in base64 encoded format.
telnet esmtp.example.com 25
220 esmtp.example.com ESMTP
ehlo esmtp.example.com
250-PIPELINING
250-8BITMIME
250-SIZE 255555555
250 AUTH LOGIN PLAIN CRAM-MD5
auth login
S: 334 VXNlcm5hbWU6
avlsdkfj ---> my mail id in base64 encoded form
334 UGFzc3dvcmQ6
lkajsdfvlj --> my mail id password in base64 encoded form
ok, go ahead
Now I will be able to send mails from my given mail id.
R12.1.3 feature says WF java mailer supports smtp authenticated login.
In Workflow NM configuration page, I tried the following options
1. servername
2. mymaulid in normal format
3. my password in normal format.
Configured successfully. But it is trying to send mails from local host which doesnt relay to external domains. Unable to establish an authenticated session with smtp.
1. servername:25
2. mymaulid in normal format
3. my password in normal format.
Configured successfully. But it is trying to send mails from local host which doesnt relay to external domains. Unable to establish an authenticated session with smtp.
1. servername
2. mymaulid in normal format
3. my password in normal format.
4. SSL Checked.
Error: Unable to connect, check hostname,username and password
1. servername:25
2. mymaulid in normal format
3. my password in normal format.
4. SSL Checked
Error: Unable to connect, check hostname,username and password
1. servername
2. mymaulid in base64 format
3. my password in base64 format.
Configured successfully. But it is trying to send mails from local host which doesnt relay to external domains. Unable to establish an authenticated session with smtp.
1. servername:25
2. mymaulid in base64 format
3. my password in base64 format.
Configured successfully. But it is trying to send mails from local host which doesnt relay to external domains. Unable to establish an authenticated session with smtp.
1. servername
2. mymaulid in base64 format
3. my password in base64 format.
4. SSL Checked.
Error: Unable to connect, check hostname,username and password
1. servername:25
2. mymaulid in base64 format
3. my password in base64 format.
4. SSL Checked
Error: Unable to connect, check hostname,username and password
I used command line tools from middle tier to connect to smtp server.
establised session wit smtp server
DEBUG SMTP: useehlo true useAuth false
javax.mail.AuthenticationFailedException Unable to connect to account
Any Suggestions?
Regards
CharanSuggestions please.
Maybe you are looking for
-
Why are animated GIF's...
...Not working when I forward them using Mail? I've tried forwarding them to myself and when opened the GIF's are no longer animated and the size and format of things has changed. This also happens in redirect. Any Ideas?
-
HP Printers - 8000 Pro and Pro 8500A Plus all in one wireless setups
First, six weeks of customer support has not been able to get my 8500A Plus all-in-one install on my XP Pro SP3 laptop. I've uninstalled the printer using HP's utility, the Control Panel and still can't install it wireless to this laptop. I am about
-
How can I change the page size in an existing layout?
I have an 8.5x11 layout that I need to change to 8x10 without starting over again- Help?
-
I have installed an old version of Adobe Reader (X or 10.1.4), but my Adobe PDF Reader add-on in Internet Explorer remains version 11+...how can I get an old version of this plug-in?
-
Oracle Linux 6.3 İnstallation
Hi guys, I do not want to install the kernel parameters during installation,i want skip this the grub screen step, how do I know? [skip this step|http://docs.oracle.com/cd/E22368_01/html/E27242/figures/Linux6_Grub_kernel_select.jpg]