Mailbox and user report

Is there anyway within exchange to run a report of all mailboxes, and the mailbox owner (i.e. the domain account), and the domain accounts status (i.e. enabled/disabled/non-exisitant ie deleted from AD). trying to determine orphaned mailboxes of exemployees.
If there is an easier way to do this please let me know.

Hey
This command will help you get the list of disconnected mailbox - you can modify the same to get the other results.
Get-MailboxStatistics | Where-Object {$_.DisconnectDate –notlike ‘’} | select Displayname, Database
Syed MM Messaging SME - IBM || MCTS || MCSE || MCSA || VCP5 || VCA ||

Similar Messages

How to delete multiple mailbox and User's in Enterprise Office 365

I'm just finishing a trial and I want to make sure all the data is gone from the system.

Hello,
You can refer to the links below which provided detailed steps to recover a deleted mailbox:
Delete or Restore User Mailboxes in Exchange Online:
http://technet.microsoft.com/en-us/library/dn186233(v=exchg.150).aspx
Restore a Mailbox to a Deleted User – Office 365:
http://office365support.ca/restore-a-mailbox-to-a-deleted-user-office-365/
Recovering deleted mailbox in Office 365 for federated and non federated mailbox:
http://mshiyas.wordpress.com/tag/office-365-recover-deleted-mailbox/
Hope this helps.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
Vineet

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

How does schedule with RESTful API a Webi report for a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

SAB BO 4.1 SP1
Does it have an RESTful API to schedule a Webi report with the parameter to specify a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

Hello Ricardo,
have you try a call like this one ?
    <schedule>
      <name>"test"</name>"
      <format type=\"webi\"/>
      <destination>
        <inbox>
         <to>userId1,userId2,userId3,groupId1,groupId12</to>
        </inbox>
      </destination>
    </schedule>
Regards
Stephane

How do I hide my mailbox and mail contents from other users, leaving other functions of my iMac accessible?

How do I hide my mailbox and mail contents from other users, leaving other functions of my iMac accessible?

You don't have to shut down the computer to switch accounts. All you do is click the Apple symbol in the upper left and choose Log Out and that's it. You can also set up Faster User Switching by:
1. Open System Preferences - Accounts
2. Click Login Options
3. Check the box called "Show fast user switching menu as" then choose from either icon, short name or name.
Then when someone wants to switch users they can. The advantage of this method is if you are have a document open and don't want to close it the document will remain open. If the other user attempts to shut down the computer they can't until you have logged out thereby saving all your data.
A very simple and elegant solution.

Report and user statistics display in Obiee report

I have a requirement in OBIEE like i need to generate a report and that report has to display some valuable information dynamically.
The report consist following column info...
Report Name|Report Folder|Report Path|Description|Description ID|Owner|Subject Area
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
Header 9
Report Name
Report Folder
Report Path
Table
user
Unused ColumnIDs
Column Created
Report Creator (user)
Report last modified
like etc..........
SO, the above said fields has to be update and provide dynamic data in the report. (Also those field info is not available in Usage tracking table so we need get those information from Catalog manager also...........)
For this I have one alternate idea like to get the solution by planning to get this solution by CSV file.If you would provide any solution like CSV get updated dynamically from Catalog manager it would be a great thing to me....Your help is highly appreciated.
How to implement this requirement ............could you provide a right path to achieve this solution.
I hope yours alternative solution.

Thanks for the reply Yannick.
We have install/configure WebCenter analytics and activity graph.
Wehave added Login Metrics in our Group Space and we are getting default login count for specific time frame but when we define a filter under User Property of any property like city, department name, phone title etc after refreshing data it is giving error like
WCS#2011.03.31.12.47.31 : Irresolvable error(s) occurred. You may want to contact Administrator with the error reference.
Please help how to solve this.

System status and user status in Line Item Reports

Dear PS-friends,
I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
Has anybody an idea how it works to show the system status and user status in Line Item Reports.
Thanks in advance!

Problem is solved.
I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username

How can i get the following done:
Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username?
i nmust do this for 16 users TODAY, SO PLEASE HELP ME OUT HERE.
Thanks in advance!!
kind regards,
Rene Veldman
System Administrator Teidem bv, The Netherlands.

Rene,
Why are you not changing the username of the existing account, instead of deleting the existing one and creating a new one?
If you truly need to delete and create new, you can save the GUID for the mailbox (Get-MailboxStatistics <mailbox alias> | Fl MailboxGuid), mail disable the existing account (Disable-Mailbox <mailbox alias>
will work), clean the mailbox database it was hosted on (Clean-MailboxDatabase
<database name>), then create your new account and recover the existing mailbox to that new account (Connect-Mailbox -Identity <Guid from before> -Database <Database name> -User <SAM account name of new account> -Alias
<what you wish to set the alias to>). In PowerShell, for all steps, you would do the following:
$MbxAlias = <mailbox alias>
$NewMbxAcct = <SAM Account Name for new account>
$NewMbxAlias = <new alias for mailbox>
$DomCtrl = (dir env:\LOGONSERVER).Value.Substring(2)
$MbxGuid = (Get-MailboxStatistics $MbxAlias -DomainController $DomCtrl).MailboxGuid
$MbxDb = (Get-Mailbox $MbxAlias -DomainController $DomCtrl).Database
Disable-Mailbox $MbxAlias
Clean-MailboxDatabase $MbxDb
Connect-Mailbox -Identity $MbxGuid -Database $MbxDb -User $NewMbxAcct -Alias $NewMbxAlias -DomainController $DomCtrl
You will need to supply the information in bold in the above commands, and you will need to create the new account before you run the above commands. I include direct use of a specific domain controller so you won't need to worry about replication.
If you are changing the account from one domain to another, this will not help, and you will need to wait for replication throughout the process, running the commands individually.

Can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

In Cisco Prime, can I run a Unique Clients and Users Summary report customized by both floor area and SSID?

Allright guys. I appreciate the quick responses. I've worked a lot in CR however i am not understanding the solution so I'd appreciate if you can dumb it down for me. If i understand it correctly you guys are suggesting to make a formula, that either return my group by string (which is a formula in my report) or the Quantity. I tried writing a formula like this
if ({@param} = 1 then
GroupName ({@GroupBy})
else
{NetPNL.GrossAfterAdj}
but it seems like CR does not allow you to return 2 different data types. Even if it had worked i would not know what to do from there. Can anyone please dumb it down for me. To make my situation more clear below is an example of how my data is..
MN 100
MN 200
MN 50
CA 300
CA 500
when the data shows in the report, its grouped by state, so it comes out like
MN 350
CA 800
I want the users to decide whether they want it sorted by state (ascending)
CA 800
MN 350
or Total quantity (asc)
MN 350
CA 800

Export 2 specific folders from users A mailbox and transfer them to user B Via Powershell

Hi
i know there is a simpler method for the user to export the folder within outlook as a PST file and send it to the other user to import... but
Is there a powershell command sequence i can use that will export folders from User A mailbox and import them into User B's mailbox remotely so they don't have to do anything.
Many Thanks
Gordon

i made some progress with the following
New-MailboxExportRequest -mailbox "User A" -includeFolders "User A\\TransferFolder" -Filepath \\server\serversubfolder\transfer.pst -verbose
then using
New-MailboxImportRequest -mailbox "User B" -FilePath \\server\serversubfolder\transfer.pst -TargetRootFolder "Inbox" -includefolder "Transferfolder" -verbose

How can you assign user 1 to org 1 and user 2 to org 2. (Reports)

if i use user 1 and user 2 for org 1 and org 2 respectively. I want user 1 can see the data of org 1 only not org 2 and same for user 2 can see the data for org 2 only how i can do this in reports. Now suppose you have 200 user and org then how you handle this in reports.

Hi Ranjeet,
Maintain a table with two fields - user & organisation.
Fill it with proper user & his corresponding org details.
While fetching the data for report output, take the user as input & fetch the corresponding Organisation.
Then while preparing the final output data, prepare it based on the users organisation.
Hope this helps you.
Revert back if you have any issues.

Reports Executed from SA38 and user name

Hi,
I wanted to find the reports executed from sA38 and the user name who did it
We are able to get the information from STAD, but we are able to get only one day's data
Please let me know if there is any table , where i can get the information of all the list of Reports and users executed from SA38
Thanks in Advance

Hello Balaji
you need to turn on audit log ...through sm19 you can to that,not only the user but report name
which is executed is also available when you turn on the audit (sm19),after that you can check
the daily audits by tcode sm20.so browse for it...you may get more information.
regards,
Manjula.

SQL to retrieve business areas, users and their reports?

Hi,
I've been able to retrieve by sql, users and their reports or business areas and thier users, but I'm unable to retrieve business areas, users and reports in the same sql.
I've been looking in eul tables without success. I guess someone has already done that?
Thanks

Hello
The problem you have is that you are trying to mix objects that don't go together.
As you have already determined, you can have a script to query users who have access to business areas, and you can also have a script to query users who have access to or own reports. However there is no link between business areas and reports.
Discoverer reports are validated against folders, not business areas. If a report uses 2 folders and there are 10 business areas that contain those folders which business area do you think the report was written against? The answer is none of them. You just happened to have a business area open at the time the report was written but truthfully you could have used any of them. Therefore, if a user reopens a workbook that uses folders found in multiple business areas, Discoverer will default to the first business area by name that contains all of the folders used and that the user has been granted access to.
Hope this helps
Best wishes
Michael

Exchange 2013 mailbox user reports 2 years of sent items from his mailbox have gone missng

hello,
bit of an odd one as at the moment as its only one user reporting this problem so far.
the user is saying that the only folder affected is sent items and that items from 2012 to present date have vanished from there sent items folder.
they are adamant they have not deleted them and there not in there deleted items folder either.
they are computer literate so i inclined to believe that the issue lies with exchange.
when they checked there sync issues folder on outlook it came back with hundreds of
"Synchronization of some deletions failed." errors and also "746
item(S) deleted in online folder"
i do have database backups so i can recover deleted emails from those if worst comes to worst
does anyone have any suggestions on what i can do to resolve this issue or point me in the direction of where to start troubleshooting from?
many thanks
Gordon

hello,
bit of an odd one as at the moment as its only one user reporting this problem so far.
the user is saying that the only folder affected is sent items and that items from 2012 to present
date have vanished from there sent items folder.
they are adamant they have not deleted them and there not in there deleted items folder either or available for recovery.
they do use outlook on there mobile so there is a chance that they inadvertently deleted them via there phone client
they are computer literate so i am inclined to believe that the issue lies with exchange,
when they checked there sync issues folder on outlook it came back with hundreds of
"Synchronization
of some deletions failed." errors and also "746
item(S) deleted in online folder"
i do have database backups so i can recover deleted emails
from those if worst comes to worst
does anyone have any suggestions on what i can do to resolve
this issue or point me in the direction of where to start troubleshooting from?
many thanks
Gordon

Reports usage and Users list

Dear Friends, Good Morning.
Where can see/get the correct data/repor/informationt for my problem.
I have 300 users and 100 reports in BW system, I want to know the complete list of users and what reports they are using etc...
I know that users list but I want to know how frequently the users are using the reports and what are the reports.
Thanks
Ganga

Hi,
Use BW statics MP and Standard reprt to find out u r requiremnet r u can use tcode sm04
MP:0BWTC_C10
Query:0BWTC_C10_Q503
For more information u can look this link
http://help.sap.com/saphelp_nw70/helpdata/EN/74/0efd10ab46554398da081697cd27c1/frameset.htm
Regards,
satya

Mailbox and user report

Similar Messages

Maybe you are looking for